The gap between recognition and the 'compensation business' : the claim against Britain for compensation by Kenya's former Mau Mau fighters

During the first Kibaki administration (2002-2007), a movement by the former Mau Mau fighters demanded recognition for the role that they had played in the achievement of independence. They began to demand, also, monetary compensation for past injustices. Why had it taken over 40 years (from independence in 1963) for the former Mau Mau fighters to initiate this movement? What can be observed as the outcome of their movement? To answer these questions, three different historical currents need to be taken into account. These were, respectively, changing trends in the government of Kenya, progress in historical research into the actual circumstances of colonial control, and a realization, based on mounting experience, that launching a legal action against Britain could turn out to be a lucrative initiative. This paper concludes that, regardless of the actual purpose of the legal case, neither of their objectives was certain to be achieved. Two inescapable realities remain: the doubts cast on the reputation of the government by its decision to lift the Mau Mau‟s outlaw status – a decision that was widely seen as a latter-day example of the „Kikuyu favouritism‟ policy followed by the first Kibaki administration – and the popular interpretation of the involvement of Leigh Day, well known in Kenya ever since the unexploded bombs case for its success in obtaining substantial compensation payments, as a vehicle for squeezing large amounts of money from the British government for the benefit of the Kikuyu people.

Caste, land, and migration : a preliminary analysis of a village survey in an underdeveloped state in India

This paper explores migration from Bihar, one of the most underdeveloped states in India, by paying particular attention to social class (caste) and landholdings. After describing details of individual migrants, we present our preliminary findings on the determinants of migration, based on our field survey of 200 households in four villages in 2011. In terms of social class, Muslims are more likely to migrate, but Scheduled Castes do not show a high propensity to migrate as is stated in some of the existing literature where the underclass is said to be more mobile. In terms of landholdings, the probability that someone will migrate is high among the landless and smaller landholders but it decreases as the size of the landholding increases. However, as the size of the landholding increases still further, a reverse effect of landholding on decisions regarding migration moves in, with the decline in probability becoming less and less. This result confirms a non-linear relationship between landholdings and the decision to migrate. Some further research questions are raised in the paper.

Marriage as women's old age insurance : evidence from migration and land inheritance practices in rural Tanzania

In a traditional system of exogamous and patrilocal marriage prevalent in much of Sub-Saharan Africa, when she marries, a rural woman typically leaves her kin to reside with her husband living outside her natal village. Since a village that allows a widow to inherit her late husband's land can provide her with old age security, single females living outside the village are more likely to marry into the village. Using a natural experimental setting, provided by the longitudinal household panel data drawn from rural Tanzania for the period from 1991 to 2004, during which several villages that initially banned a widow's land inheritance removed this discrimination, this study provides evidence in support of this view, whereby altering a customary land inheritance rules in a village in favor of widows increased the probability of males marrying in that village. This finding suggests that providing rural women with old age protection (e.g., insurance, livelihood protection) has remarkable spatial and temporal welfare effects by influencing their decision to marry.

Stigma, social relationship and HIV testing in the workplace : evidence from South Africa

This paper explores whether a worker's unwillingness to make his/her HIV-positive status or test-taking experience known by colleagues impedes his/her decision to test for HIV. After analyzing the new survey data provided by employees working for a large multinational enterprise in South Africa (2009-2010), this study finds that this unwillingness is negatively associated with test-taking (at the enterprise's on-site clinic) of workers who are extensively networked with close colleagues (i.e., know their phone numbers). It appears that the expected disutility associated with HIV/AIDS-related stigma prohibits test uptake. When introducing HIV counseling and testing programs into a corporate sector, providing all workers with an excuse to test in the workplace and/or inducing them to privately test outside the workplace may be effective in encouraging the uptake.

ERP Software Selection Processes: A Case Study in the Metal Transformation Sector

When a firm decides to implement ERP softwares, the resulting consequences can pervade all levels, includ- ing organization, process, control and available information. Therefore, the first decision to be made is which ERP solution must be adopted from a wide range of offers and vendors. To this end, this paper describes a methodology based on multi-criteria factors that directly affects the process to help managers make this de- cision. This methodology has been applied to a medium-size company in the Spanish metal transformation sector which is interested in updating its IT capabilities in order to obtain greater control of and better infor- mation about business, thus achieving a competitive advantage. The paper proposes a decision matrix which takes into account all critical factors in ERP selection.

Optimization of the irrigation time and irrigation frequency by using Hydrus-2D and a capacitance FDR sensor

The evolution of water content on a sandy soil during the sprinkler irrigation campaign, in the summer of 2010, of a field of sugar beet crop located at Valladolid (Spain) is assessed by a capacitive FDR (Frequency Domain Reflectometry) EnviroScan. This field is one of the experimental sites of the Spanish research center for the sugar beet development (AIMCRA). The objective of the work focus on monitoring the soil water content evolution of consecutive irrigations during the second two weeks of July (from the 12th to the 28th). These measurements will be used to simulate water movement by means of Hydrus-2D. The water probe logged water content readings (m3/m3) at 10, 20, 40 and 60 cm depth every 30 minutes. The probe was placed between two rows in one of the typical 12 x 15 m sprinkler irrigation framework. Furthermore, a texture analysis at the soil profile was also conducted. The irrigation frequency in this farm was set by the own personal farmer 0 s criteria that aiming to minimizing electricity pumping costs, used to irrigate at night and during the weekend i.e. longer irrigation frequency than expected. However, the high evapotranspiration rates and the weekly sugar beet water consumption—up to 50mm/week—clearly determined the need for lower this frequency. Moreover, farmer used to irrigate for six or five hours whilst results from the EnviroScan probe showed the soil profile reaching saturation point after the first three hours. It must be noted that AIMCRA provides to his members with a SMS service regarding weekly sugar beet water requirement; from the use of different meteorological stations and evapotranspiration pans, farmers have an idea of the weekly irrigation needs. Nevertheless, it is the farmer 0 s decision to decide how to irrigate. Thus, in order to minimize water stress and pumping costs, a suitable irrigation time and irrigation frequency was modeled with Hydrus-2D. Results for the period above mentioned showed values of water content ranging from 35 and 30 (m3/m3) for the first 10 and 20cm profile depth (two hours after irrigation) to the minimum 14 and 13 (m3/m3) ( two hours before irrigation). For the 40 and 60 cm profile depth, water content moves steadily across the dates: The greater the root activity the greater the water content variation. According to the results in the EnviroScan probe and the modeling in Hydrus-2D, shorter frequencies and irrigation times are suggested.

Continental Perspective 3, Spain

Well, I firmly believe that, as a professor, one has the duty, the obligation to show and explain his work. Not, of course, as a model to imitate, but rather as an opportunity to reflect upon that work. So, I will try to explain some of the considerations that were crucial in the development of each project. It is my hope that these reflections may be of interest to you, and due to my optimistic nature, that you may even enjoy it. Today I am going to present some projects, from a specific point of view: that of MATERIALITY. This is why I decided to title this presentation ARCHITEXTURE: that is, architecture from the point of view of texture, the quality of its material. Our architecture wants to pay attention to materials; we like to use very physical materials. We try to explore the expressive possibilities of different materials. That allows us, on the one hand, to try to master different techniques, and exploit their potential. On the other hand, it also avoids the dangers of style. Style is the death of an architect. When he starts repeating formulas, avoiding experimentation, copying himself, he dies of boredom, of intellectual boredom. Nevertheless, I don’t believe that the material itself determines anything. Architecture is an exercise of the freedom of an architect. Almost nothing is a given. Of course, there is the law of gravity and economic restraints, and even the overwhelming building code. But the most determinant factor is always the freedom of the architect, derived from his mastery of knowledge and culture, and his decision to innovate and to take risks

Coupled model of initiation and propagation of corrosion in reinforced concrete

Corrosion of reinforcing steel in concrete due to chloride ingress is one of the main causes of the deterioration of reinforced concrete structures. Structures most affected by such a corrosion are marine zone buildings and structures exposed to de-icing salts like highways and bridges. Such process is accompanied by an increase in volume of the corrosión products on the rebarsconcrete interface. Depending on the level of oxidation, iron can expand as much as six times its original volume. This increase in volume exerts tensile stresses in the surrounding concrete which result in cracking and spalling of the concrete cover if the concrete tensile strength is exceeded. The mechanism by which steel embedded in concrete corrodes in presence of chloride is the local breakdown of the passive layer formed in the highly alkaline condition of the concrete. It is assumed that corrosion initiates when a critical chloride content reaches the rebar surface. The mathematical formulation idealized the corrosion sequence as a two-stage process: an initiation stage, during which chloride ions penetrate to the reinforcing steel surface and depassivate it, and a propagation stage, in which active corrosion takes place until cracking of the concrete cover has occurred. The aim of this research is to develop computer tools to evaluate the duration of the service life of reinforced concrete structures, considering both the initiation and propagation periods. Such tools must offer a friendly interface to facilitate its use by the researchers even though their background is not in numerical simulation. For the evaluation of the initiation period different tools have been developed: Program TavProbabilidade: provides means to carry out a probability analysis of a chloride ingress model. Such a tool is necessary due to the lack of data and general uncertainties associated with the phenomenon of the chloride diffusion. It differs from the deterministic approach because it computes not just a chloride profile at a certain age, but a range of chloride profiles for each probability or occurrence. Program TavProbabilidade_Fiabilidade: carries out reliability analyses of the initiation period. It takes into account the critical value of the chloride concentration on the steel that causes breakdown of the passive layer and the beginning of the propagation stage. It differs from the deterministic analysis in that it does not predict if the corrosion is going to begin or not, but to quantifies the probability of corrosion initiation. Program TavDif_1D: was created to do a one dimension deterministic analysis of the chloride diffusion process by the finite element method (FEM) which numerically solves Fick’second Law. Despite of the different FEM solver already developed in one dimension, the decision to create a new code (TavDif_1D) was taken because of the need to have a solver with friendly interface for pre- and post-process according to the need of IETCC. An innovative tool was also developed with a systematic method devised to compare the ability of the different 1D models to predict the actual evolution of chloride ingress based on experimental measurements, and also to quantify the degree of agreement of the models with each others. For the evaluation of the entire service life of the structure: a computer program has been developed using finite elements method to do the coupling of both service life periods: initiation and propagation. The program for 2D (TavDif_2D) allows the complementary use of two external programs in a unique friendly interface: • GMSH - an finite element mesh generator and post-processing viewer • OOFEM – a finite element solver. This program (TavDif_2D) is responsible to decide in each time step when and where to start applying the boundary conditions of fracture mechanics module in function of the amount of chloride concentration and corrosion parameters (Icorr, etc). This program is also responsible to verify the presence and the degree of fracture in each element to send the Information of diffusion coefficient variation with the crack width. • GMSH - an finite element mesh generator and post-processing viewer • OOFEM – a finite element solver. The advantages of the FEM with the interface provided by the tool are: • the flexibility to input the data such as material property and boundary conditions as time dependent function. • the flexibility to predict the chloride concentration profile for different geometries. • the possibility to couple chloride diffusion (initiation stage) with chemical and mechanical behavior (propagation stage). The OOFEM code had to be modified to accept temperature, humidity and the time dependent values for the material properties, which is necessary to adequately describe the environmental variations. A 3-D simulation has been performed to simulate the behavior of the beam on both, action of the external load and the internal load caused by the corrosion products, using elements of imbedded fracture in order to plot the curve of the deflection of the central region of the beam versus the external load to compare with the experimental data.

The function of the secondary lining in the New Austrian Tunnelling Method

The decision to build the Secondary Lining in Route Tunnels which are perforated using the New Austrian Tunnelling Method does not generally depend on reasons of structural strength. The paper discusses the implications of the issue as well as the pros and cons of the current alternative courses of action.

Cycling habits and other psychological variables affecting commuting by bicycle in Madrid, Spain

To develop effective cycling policies, decision makers and administrators should know the factors influencing the use of the bicycle for daily mobility. Traditional discrete choice models tend to be based on variables such as time and cost, which do not sufficiently explain the choice of the bicycle as a mode of transportation. Because psychological factors have been identified as particularly influential in the decision to commute by bicycle, this paper examines the perceptions of cycling factors and their influence on commuting by bicycle. Perceptions are measured by attitudes, other psychological variables, and habits. Statistical differences in the variables are established in relation to the choice of commuting mode and bicycle experience (commuter, sport-leisure, no use). Doing so enables the authors to identify the main barriers to commuting by bicycle and to make recommendations for cycling policies. Two underlying structures (factors) of the attitudinal variables are identified: direct benefits and long-term benefits. Three other factors are related to variables of difficulty: physical conditions, external facilities, and individual capacities. The effect of attitudes and other psychological variables on people's decision to cycle to work-place of study is tested by using a logit model. In the case study of Madrid, Spain, the decision to cycle to work-place of study is heavily influenced by cycling habits (for noncommuting trips). Because bicycle commuting is not common, attitudes and other psychological variables play a less important role in the use of bikes.

Cycling habits and other psychological variables affecting commuting by bicycle in city of Madrid

To develop effective cycling policies, decision makers and administrators should know the factors influencing the use of the bicycle for daily mobility. Traditional discrete choice models tend to be based on variables such as time and cost, which do not sufficiently explain the choice of the bicycle as a mode of transportation. Because psychological factors have been identified as particularly influential in the decision to commute by bicycle, this paper examines the perceptions of cycling factors and their influence on commuting by bicycle. Perceptions are measured by attitudes, other psychological variables, and habits. Statistical differences in the variables are established in relation to the choice of commuting mode and bicycle experience (commuter, sport–leisure, no use). Doing so enables the authors to identify the main barriers to commuting by bicycle and to make recommendations for cycling policies. Two underlying structures (factors) of the attitudinal variables are identified: direct benefits and long-term benefits. Three other factors are related to variables of difficulty: physical conditions, external facilities, and individual capacities. The effect of attitudes and other psychological variables on people’s decision to cycle to work–place of study is tested by using a logit model. In the case study of Madrid, Spain, the decision to cycle to work– place of study is heavily influenced by cycling habits (for noncommuting trips). Because bicycle commuting is not common, attitudes and other psychological variables play a less important role in the use of bikes.

Energy Storage Systems for Electric Vehicles: Performance Comparison based on a Simple Equivalent Circuit and Experimental Tests

The decision to select the most suitable type of energy storage system for an electric vehicle is always difficult, since many conditionings must be taken into account. Sometimes, this study can be made by means of complex mathematical models which represent the behavior of a battery, ultracapacitor or some other devices. However, these models are usually too dependent on parameters that are not easily available, which usually results in nonrealistic results. Besides, the more accurate the model, the more specific it needs to be, which becomes an issue when comparing systems of different nature. This paper proposes a practical methodology to compare different energy storage technologies. This is done by means of a linear approach of an equivalent circuit based on laboratory tests. Via these tests, the internal resistance and the self-discharge rate are evaluated, making it possible to compare different energy storage systems regardless their technology. Rather simple testing equipment is sufficient to give a comparative idea of the differences between each system, concerning issues such as efficiency, heating and self-discharge, when operating under a certain scenario. The proposed methodology is applied to four energy storage systems of different nature for the sake of illustration.

Propuesta de una metodología para provisión de servicios de outsourcing de TI

El mercado de outsourcing ha estado creciendo en los últimos años y se prevé que lo siga haciendo en los próximos, pero este crecimiento ha estado limitado por el fracaso de muchos proyectos que, en algunos casos, han llevado a las organizaciones a asumir de nuevo esos servicios (insourcing). Estos fracasos se han debido en gran parte a los problemas con los proveedores: falta de experiencia, de capacidades para asumir los proyectos, dificultad en la comunicación,… A diferencia de lo que ocurre en otras disciplinas, no existe una metodología que ayude, tanto a los clientes como a los proveedores de servicios de outsourcing de TI, a gobernar y gestionar sus proyectos y conseguir los resultados buscados. En los últimos años han aparecido, al mismo tiempo que la expansión del outsourcing, algunos modelos y marcos de buenas prácticas para la gestión de los proyectos de outsourcing, pero generalmente sólo cubren algunos aspectos de la gestión. No se los puede considerar metodologías, porque no definen roles, responsabilidades ni entregables. Por lo general, son el resultado de la experiencia en la gestión de otros tipos de proyectos. Hay que considerar también que, excepto eSCM-SP, que es un modelo de buenas prácticas para mejorar la capacidad en la provisión de servicios, están todos orientados al cliente. El objetivo de esta tesis es, por un lado, demostrar la necesidad de contar con una metodología que guíe a los proveedores durante todo el ciclo de vida un proyecto de outsourcing y, por otro, proponer una metodología que contemple desde la fase inicial de la búsqueda de oportunidades de negocio, evaluación de las propuestas RFP, la decisión de hacer una oferta o no para la prestación de servicios, la participación en la due diligence, la firma del contrato, la transición y la entrega de servicios, hasta la finalización del contrato. La metodología se ha organizado en base a un ciclo de vida del outsourcing de cinco etapas, definiendo para cada una de ellas los roles que participan y las responsabilidades que deberán asumir, las actividades a realizar y los entregables que se deberán generar, y que servirán de elementos de control tanto para la gestión del proyecto como para la provisión del servicio. La validación de la metodología se ha realizado aplicándola en proyectos de provisión de servicios de TI de una mediana empresa española y comparando los resultados obtenidos con los conseguidos en proyectos anteriores. ABSTRACT The outsourcing market has been growing in recent years and it is expected to keep doing so in the coming years, but this growth has been limited by the failure of many projects that, in some cases, has led organizations to take back those services (insourcing). These failures have been due to a major degree to problems with providers: lack of experience and capacity to take on the projects, and difficulties of communication. Unlike what happens in other disciplines, there is no methodology for helping both customers and providers of outsourcing services. In recent years, some good practice frameworks have also appeared at the same time as the expansion of outsourcing. They are not methodologies because they have not defined any roles, responsibilities and deliverables. These frameworks aim to help organizations to be successful at managing and governing outsourcing projects. They are usually the result of their experience in managing other kinds of projects. In consequence, it is not appropriate to name them "methodologies" for managing outsourcing projects and much less "standards". It is also important to note that all existing good practice frameworks, except eSCM-SP, are client-oriented. The aim of this thesis is to state the need to propose a methodology that guides providers throughout the whole outsourcing life cycle and facilitates the provision of quality services and their management, and the proposal of a methodology in which the stages, activities, deliverables, roles and responsibilities are clearly defined. The proposed methodology cover all the stages of the outsourcing life cycle, from the early stage of searching for business opportunities, evaluation of the RFP proposals, the decision to bid or not to bid for the service provision, participation in the due diligence if necessary, the signing of the contract, the transition and delivery of service to the termination of the contract. For each activity, roles, responsibilities and deliverables have been defined. The validation of the methodology has been done by applying it in the provision of some outsourcing projects carried out by a Spanish IT medium company and comparing the results with those obtained in previous projects.

Introducción de criterios de sostenibilidad en la elección de emplazamientos industriales mediante modelos multicriterio

(SPA) La elección de localizaciones para la implantación de actividades industriales es un problema complejo, donde a los criterios de coste y eficiencia se han ido añadiendo otros nuevos relativos tanto al impacto en el medio ambiente como a la imagen de la empresa reflejada en la Responsabilidad Social Empresarial. Los criterios medioambientales han ido adquiriendo gran relevancia en la decisión final, hasta convertirse, gracias a la obligación de someter los proyectos a evaluación ambiental, en elementos clave en la decisión final. Por ello, resulta relativamente frecuente que los promotores consulten previamente con la Administración sobre la viabilidad de sus proyectos antes de iniciar un dilatado procedimiento administrativo. En este trabajo se plantea la utilización de indicadores de sostenibilidad y su aplicación, a través de un modelo de decisiones multicriterio, para la ordenación de las distintas opciones de ubicación inicialmente consideradas, de tal forma que se conviertan en instrumento de tanteo y ayuda en la toma de estas decisiones. Para mostrar su utilidad se propone la utilización de la herramienta de apoyo basada en la metodología PROMETHEE y su aplicación en la ordenación de cinco emplazamientos alternativos para la instalación de una cementera en la Comunidad de Madrid según criterios de sostenibilidad. (ENG) The choice of locations for the implementation of industrial activities is a complex problem where the cost and efficiency criteria have been adding new ones relating to the environment impact and the company’s corporate image reflected in Corporate Social Responsability. The environmental criteria have been getting big importance in the final decision, to become key elements in the final decision, due to the duty of submit of environmental assessment projects. Therefore, promoters, quite often, ask previously to the Administration about the viability of their projects before starting a lengthy administrative procedure. This paper proposes the use of sustainability indicators and their application through a multi-criteria decision model for managing the establishment options initially considered, so that they become an help instrument of estimation in order to making these decisions. To show its usefulness we propose the use of the support tool for decision making based on the PROMETHEE methodology and its application in the management of 5 alternative sites for the installation of a cement factory in the Community of Madrid under sustainability criteria.

Modelo de gestión de un embalse en tiempo real durante avenidas basado en redes bayesianas entrenadas con el método de optimización PLEM

En la actualidad, la gestión de embalses para el control de avenidas se realiza, comúnmente, utilizando modelos de simulación. Esto se debe, principalmente, a su facilidad de uso en tiempo real por parte del operador de la presa. Se han desarrollado modelos de optimización de la gestión del embalse que, aunque mejoran los resultados de los modelos de simulación, su aplicación en tiempo real se hace muy difícil o simplemente inviable, pues está limitada al conocimiento de la avenida futura que entra al embalse antes de tomar la decisión de vertido. Por esta razón, se ha planteado el objetivo de desarrollar un modelo de gestión de embalses en avenidas que incorpore las ventajas de un modelo de optimización y que sea de fácil uso en tiempo real por parte del gestor de la presa. Para ello, se construyó un modelo de red Bayesiana que representa los procesos de la cuenca vertiente y del embalse y, que aprende de casos generados sintéticamente mediante un modelo hidrológico agregado y un modelo de optimización de la gestión del embalse. En una primera etapa, se generó un gran número de episodios sintéticos de avenida utilizando el método de Monte Carlo, para obtener las lluvias, y un modelo agregado compuesto de transformación lluvia- escorrentía, para obtener los hidrogramas de avenida. Posteriormente, se utilizaron las series obtenidas como señales de entrada al modelo de gestión de embalses PLEM, que optimiza una función objetivo de costes mediante programación lineal entera mixta, generando igual número de eventos óptimos de caudal vertido y de evolución de niveles en el embalse. Los episodios simulados fueron usados para entrenar y evaluar dos modelos de red Bayesiana, uno que pronostica el caudal de entrada al embalse, y otro que predice el caudal vertido, ambos en un horizonte de tiempo que va desde una a cinco horas, en intervalos de una hora. En el caso de la red Bayesiana hidrológica, el caudal de entrada que se elige es el promedio de la distribución de probabilidad de pronóstico. En el caso de la red Bayesiana hidráulica, debido al comportamiento marcadamente no lineal de este proceso y a que la red Bayesiana devuelve un rango de posibles valores de caudal vertido, se ha desarrollado una metodología para seleccionar un único valor, que facilite el trabajo del operador de la presa. Esta metodología consiste en probar diversas estrategias propuestas, que incluyen zonificaciones y alternativas de selección de un único valor de caudal vertido en cada zonificación, a un conjunto suficiente de episodios sintéticos. Los resultados de cada estrategia se compararon con el método MEV, seleccionándose las estrategias que mejoran los resultados del MEV, en cuanto al caudal máximo vertido y el nivel máximo alcanzado por el embalse, cualquiera de las cuales puede usarse por el operador de la presa en tiempo real para el embalse de estudio (Talave). La metodología propuesta podría aplicarse a cualquier embalse aislado y, de esta manera, obtener, para ese embalse particular, diversas estrategias que mejoran los resultados del MEV. Finalmente, a modo de ejemplo, se ha aplicado la metodología a una avenida sintética, obteniendo el caudal vertido y el nivel del embalse en cada intervalo de tiempo, y se ha aplicado el modelo MIGEL para obtener en cada instante la configuración de apertura de los órganos de desagüe que evacuarán el caudal. Currently, the dam operator for the management of dams uses simulation models during flood events, mainly due to its ease of use in real time. Some models have been developed to optimize the management of the reservoir to improve the results of simulation models. However, real-time application becomes very difficult or simply unworkable, because the decision to discharge depends on the unknown future avenue entering the reservoir. For this reason, the main goal is to develop a model of reservoir management at avenues that incorporates the advantages of an optimization model. At the same time, it should be easy to use in real-time by the dam manager. For this purpose, a Bayesian network model has been developed to represent the processes of the watershed and reservoir. This model learns from cases generated synthetically by a hydrological model and an optimization model for managing the reservoir. In a first stage, a large number of synthetic flood events was generated using the Monte Carlo method, for rain, and rain-added processing model composed of runoff for the flood hydrographs. Subsequently, the series obtained were used as input signals to the reservoir management model PLEM that optimizes a target cost function using mixed integer linear programming. As a result, many optimal discharge rate events and water levels in the reservoir levels were generated. The simulated events were used to train and test two models of Bayesian network. The first one predicts the flow into the reservoir, and the second predicts the discharge flow. They work in a time horizon ranging from one to five hours, in intervals of an hour. In the case of hydrological Bayesian network, the chosen inflow is the average of the probability distribution forecast. In the case of hydraulic Bayesian network the highly non-linear behavior of this process results on a range of possible values of discharge flow. A methodology to select a single value has been developed to facilitate the dam operator work. This methodology tests various strategies proposed. They include zoning and alternative selection of a single value in each discharge rate zoning from a sufficient set of synthetic episodes. The results of each strategy are compared with the MEV method. The strategies that improve the outcomes of MEV are selected and can be used by the dam operator in real time applied to the reservoir study case (Talave). The methodology could be applied to any single reservoir and, thus, obtain, for the particular reservoir, various strategies that improve results from MEV. Finally, the methodology has been applied to a synthetic flood, obtaining the discharge flow and the reservoir level in each time interval. The open configuration floodgates to evacuate the flow at each interval have been obtained applying the MIGEL model.