Qualidade do debridamento obtido pela técnica de instrumentação da lima única de NiTi em canais ovais e circulares

O presente avalia a qualidade da remoção de tecido pulpar após o preparo químico-cirúrgico realizado com a técnica da lima única, descrita por Ghassan Yared. Ainda não há publicado pesquisa sobre os resultados desta técnica. Este estudo compara o percentual de tecido pulpar remanescente em canais radiculares ovais e circulares de incisivos inferiores recém-extraídos que possuíssem polpa viva e armazenados em formol a 10%. Foram comparadas duas técnicas: ProTaper Universal e a técnica da lima única F2. Após uma rigorosa seleção, quarenta e oito dentes com polpa viva que possuíam indicação de extração, foram preparados, classificados em canais ovais e circulares, separados aleatoriamente em 4 grupos e instrumentados com as duas técnicas. O grupo controle, com 12 espécimes, não recebeu nenhum tipo de intervenção. G1 (n=12), canais ovais, instrumentados com a técnica ProTaper Universal; G2 (n=12), canais ovais instrumentados com a técnica da lima única F2; G3 (n=12), canais circulares instrumentados com a técnica ProTaper Universal; G4 (n=12), canais circulares instrumentados com a técnica da lima única F2. Então, seções transversais foram preparadas para avaliação histológica. A análise da quantidade de tecido pulpar remanescente foi avaliada digitalmente. A análise preliminar dos dados brutos em conjunto de todos os grupos experimentais revelou um padrão de distribuição normal por meio do uso do teste Kolmogorov-Smirnov. A análise foi realizada, e os dados brutos foram avaliados através de métodos não-paramétricos: Teste H Kruskal-Wallis. O valor percentual mínimo de tecido remanescente foi de 0% e o máximo de 37,78% entre todos os grupos. Os valores relativos a quantidade de tecido pulpar remanescente variaram entre 0 a 43.47% m2. Os resultados do Teste H Kruskal-Wallis não revelaram diferenças entre as seções mais apicais (p > 0.05). Entretanto, foi encontrada diferença significante entre as seções mais apicais e a seção do terço médio (p < 0.05). Também foram encontradas diferenças significantes quando canais circulares foram comparados com canais ovais independente da técnica de instrumentação utilizada (p < 0.05). Porém, entre as duas técnicas de instrumentação estudadas, tanto nos canais ovais quanto para os os canais circulares, não houve diferença estatística significante (p > 0.05). A proposta deste estudo é a de fazer uma reflexão sobre a real necessidade de um grande número de instrumentos para o total preparo de canais radiculares, uma vez que nenhuma das técnicas foi capaz de debridar por completo o espaço do canal radicular.

Avaliação microtomográfica de canais mesiais de molares inferiores preparados com sistemas rotatórios e reciprocantes

O objetivo do presente trabalho foi avaliar, em microtomografia computadorizada (CT), o preparo de canais de molares inferiores com diferentes sistemas acionados a motor. Foram selecionadas 58 raízes mesiais patentes, de diâmetro anatômico correspondente a #10. Para a avaliação em TC, um anel de aço inoxidável foi confeccionado nos moldes do suporte para amostra do microtomógrafo, para que servisse de fôrma para a inclusão das raízes em resina Duralay, a fim de padronizar a posição do espécime no escaneamento inicial e final. Os canais foram preparados com os sistemas Reciproc R25 (n=16); WaveOne Primary File (n=16); Twisted File (n=14), e HyFlex (n=12). Após serem escaneados, foram reconstruídos tridimensionalmente e avaliados quantitativamente quanto à variação de volume (mm3), área de superfície (mm2) e structure model index (SMI). Foi, ainda, realizada a avaliação qualitativa das seções transversais por terço e por quadrante (MV, ML, DV, DL), sendo avaliado o toque de paredes. Os dados paramétricos foram analisados estatisticamente pelos testes ANOVA e t para amostras pareadas (α=5%). Não foi observada diferença estatística nos parâmetros quantitativos avaliados para Reciproc (142,77 76,75; 42,22 19,22; e 14,68 17,69, respectivamente); WaveOne (105,09 64,82; 29,54 19,21; 14,81 9,10, respectivamente); Twisted File (111,83 43,09; 33,31 18,40; 9,16 6,57, respectivamente), e HyFlex (151,74 149,37; 43,08 41,44; 10,80 8,52, respectivamente) (p=0,423). Dentro de cada grupo, foi observada diferença significante entre os resultados pré e pós-operatórios. O teste não paramétrico de Kruskal Wallis foi aplicado para a avaliação relativa ao toque de paredes. Foi observado que o sistema HyFlex apresentou a maior porcentagem de toques (82,3 13,1), seguido por Reciproc (81,3 16,9), Twisted File (78,3 14,4) e, por fim, WaveOne (76,9 21,7) (p>0,05). Em relação aos terços não foi observada diferença significativa (p=0,424). Os resultados da avaliação dos quadrantes intergrupo não demonstraram diferenças, porém indicaram tendência do preparo em direção à parede distal no terço cervical. Ao final, pôde-se concluir que os sistemas testados se equivalem quanto ao preparo de canais mesiais de molares inferiores; porém, nenhuma das técnicas foi capaz de tocar completamente em todas as paredes do canal radicular.

Direct observation of the structural component of the metal-insulator phase transition and growth habits of epitaxially grown VO2 nanowires.

We have grown epitaxially orientation-controlled monoclinic VO2 nanowires without employing catalysts by a vapor-phase transport process. Electron microscopy results reveal that single crystalline VO2 nanowires having a [100] growth direction grow laterally on the basal c plane and out of the basal r and a planes of sapphire, exhibiting triangular and rectangular cross sections, respectively. In addition, we have directly observed the structural phase transition of single crystalline VO2 nanowires between the monoclinic and tetragonal phases which exhibit insulating and metallic properties, respectively, and clearly analyzed their corresponding relationships using in situ transmission electron microscopy.

Combining stable isotopes and skeletal growth marks to detect habitat shifts in juvenile loggerhead sea turtles Caretta caretta

Understanding the phase and timing of ontogenetic habitat shifts underlies the study of a species’ life history and population dynamics. This information is especially critical to the conservation and management of threatened and endangered species, such as the loggerhead sea turtle Caretta caretta. The early life of loggerheads consists of a terrestrial egg and hatchling stage, a posthatchling and juvenile oceanic, pelagic feeding stage, and a juvenile neritic, primarily benthic feeding stage. In the present study, novel approaches were applied to explore the timing of the loggerhead ontogenetic shift from pelagic to benthic habitats. The most recent years of somatic growth are recorded as annual marks in humerus cross sections. A consistent growth mark pattern in benthic juvenile loggerheads was identified, with narrow growth marks in the interior of the bone transitioning to wider growth marks at the exterior, indicative of a sharp increase in growth rates at the transitional growth mark. This increase in annual growth is hypothesized to correlate with the ontogenetic shift from pelagic to benthic habitats. Stable isotopes of carbon and nitrogen just interior and exterior to the transitional growth mark, as well as stable isotopes from pelagic and benthic flora, fauna and loggerhead stomach contents, were analyzed to determine whether this transition related to a diet shift. The results clearly indicate that a dietary shift from oceanic/pelagic to neritic/benthic feeding corresponds to a transitional growth mark. The combination of stable isotope analysis with skeletochronology can elucidate the ecology of cryptic life history stages during loggerhead ontogeny.

Age and growth of sailfish (Istiophorus platypterus) in waters off eastern Taiwan

Age and growth of sailfish (Istiophorus platypterus) in waters off eastern Taiwan were examined from counts of growth rings on cross sections of the fourth spine of the first dorsal fin. Length and weight data and the dorsal fin spines were collected monthly at the fishing port of Shinkang (southeast of Taiwan) from July 1998 to August 1999. In total, 1166 dorsal fins were collected, of which 1135 (97%) (699 males and 436 females) were aged successfully. Trends in the monthly mean marginal increment ratio indicated that growth rings are formed once a year. Two methods were used to back-calculate the length of presumed ages, and growth was described by using the standard von Bertalanffy growth function and the Richards function. The most reasonable and conservative description of growth assumes that length-at-age follows the Richards function and that the relationship between spine radius and lower jaw fork length (LJFL) follows a power function. Growth differed significantly between the sexes; females grew faster and reached larger sizes than did males. The maximum sizes in our sample were 232 cm LJFL for female and 221 cm LJFL for male.

Testicular development in migrant and spawning bluefin tuna (Thunnus thynnus (L.)) from the eastern Atlantic and Mediterranean

Testis histological structure was studied in bluefin tuna (Thunnus thynnus) from the eastern Atlantic and Mediterranean during the reproductive season (from late April to early June). Testicular maturation was investigated by comparing samples from bluefin tuna caught on their eastward reproductive migration off Barbate (Strait of Gibraltar area) with samples of bluefin tuna fished in spawning grounds around the Balearic Islands. Histological evaluations of cross sections showed that the testis consists of two structurally different regions, an outer proliferative region where germ cells develop synchronously in cysts, and a central region made up of a well-developed system of ducts that convey the spermatozoa produced in the proliferative region to the main sperm duct. Ultrastructural features of the different stages of the male germ cell line are very similar to those described in other teleost species. The bluefin tuna testis is of the unrestricted spermatogonial testicular type, where primary spermatogonia are present all along the germinative portion of the lobules. All stages of spermatogenesis were present in the gonad tissue of migrant and spawning bluefin tuna, although spermatids were more abundant in spawning fish. The testis size was found to increase by a factor of four (on average) during migration to the Mediterranean spawning grounds, whereas the fat bodies (mesenteric lipid stores associated with the gonads) became reduced to half their weight, and the liver mass did not change significantly with sexual maturation. Linear regression analysis of the pooled data of migrant and spawning bluefin tuna revealed a significant negative correlation between the gonad index (IG) and the fat tissue index (IF), and a weaker positive correlation between the gonad index (IG) and the liver index (IL). Our analyses indicate that the liver does not play a significant role in the storage of lipids and that mesenteric lipid reserves constitute an important energy source for gametogenesis in bluefin tuna.

Age and growth of the swordfish (Xiphias gladius L.) in the waters around Taiwan determined from anal-fin rays

Age and growth of the swordfish (Xiphias gladius) in Taiwan waters was studied from counts of growth bands on cross sections of the second ray of the first anal fin. Data on lower jaw fork length and weight, and samples of the anal fin of male and female swordfish were collected from three offshore and coastal tuna longline fishing ports on a monthly basis between September 1997 and March 1999. In total, 685 anal fins were collected and 627 of them (293 males and 334 females) were aged successfully. The lower jaw fork lengths of the aged individuals ranged from 83.4 to 246.6 cm for the females and from 83.3 to 206 cm for the males. The radii of the fin rays and growth bands on the cross sections were measured under a dissecting microscope equipped with an image analysis system. Trends in the monthly marginal increment ratio indicated that growth bands formed once a year. Thus, the age of each fish was deter-mined from the number of visible growth bands. Two methods were used to estimate and compare the standard and the generalized von Bertalanffy growth parameters for both males and females. The nonlinear least square estimates of the generalized von Bertalanffy growth parameters in method II, in which a power function was used to describe the relationship between ray radius and LJFL, were recommended as most acceptable. There were significant differences in growth parameters between males and females. The growth parameters estimated for females were the following: asymptotic length (L∞) = 300.66 cm, growth coefficient (K) = 0.040/yr, age at zero length (t0) = –0.75 yr, and the fitted fourth parameter (m) = –0.785. The growth parameters estimated for males were the following: asymptotic length (L∞) = 213.05 cm, growth coefficient (K) = 0.086/yr, age at zero length (t0) = –0.626 yr, and the fitted fourth parameter (m) = –0.768.

Unsteady transition in an axial-flow turbine. Part 1. Measurements on the turbine rotor

Previously published measurements in a low-speed, single-stage, axial-flow turbine have been reanalyzed in the light of more recent understanding. The measurements include time-resolved hot-wire traverses and surface hot film gage measurements at the midspan of the rotor suction surface with three different rotor-stator spacings. This paper investigates the suction surface boundary layer transition process, using surface-distance time plots and boundary layer cross sections to demonstrate the unsteady and two-dimensional nature of the process.

Indian squid, Uroteuthis duvauceli, is an important commercial marine fauna in the coastal waters of Oman Sea

About 3600 specimens were collected by bottom trawl at 15 sampling stations. 24 biometric characters were measured for each specimens at the laboratory.. Microscopic cross – sections of statolith were used for age determination. Sex determination and fecundity were determined. Population dynamics parameters as well as stock as stock assessment including cohort analysis were estimated using FISAT software. The findings showed that Dorsal Mantle Length (DML) and Body weight (BW) of the Indian squid were 133.9 ± 0.78 mm and 99.61 ± 0.95 g respectively. Strong correlation was found between these 2 variables (R2 = 0.90). The maximum age was 5 years. Relationship between DML and age was highly significantly of p ≤ 0.05. Overall sex ratio (M: F = 0.52) was significantly different from the expected 1:1 ratio (p ≤ 0.05). The ovary weight and nidamental glands weight were 7.72 ± 0.0006 g and 3.07 ± 0.0003g respectively. Absolute and relative fecundity of the Indian squid were found to be 122733 ± 30.87 and 2348 ± 0.4 respectively. GSI were 14.35 in April and 8.63 in July. This squid is therefore a spring spawner. The infinite dorsal mantle length were 258.62 mm for females, 194.72 mm for males and 252.02 for both sexes respectively. For population growth and mortality parameters; K (0.65 per year for both sexes, 0.85 per year for males, 0.65 per year for females); t0 (0.24year for both sexes, 0.22 year in females, 0.26 year in male); φ` (2.30 in both sexes, 2.47 for males, 2.37 for females); Z (1.17 per year for both sexes, 1.10 per year in females, 1.39 per year, in males); M (0.70 per year for both sexes, 0.90 for males, 0.67 for females); F(0.27 per year for both sexes, 0.27 per year in males, 0.195 per year in females). Exploitation coefficient were 0.51 per year for both sexes, 0.57 per year males and 0.51 per year females respectively. The results indicates that since the Indian squid is a short live aquatic organism, therefore, the exploitation coefficient could be raised to 0.7 per year. The analysis showed that total biomass and MSY were 10103.5 ton and 2576.4 ton respectively. These findings are the first study of its sort about the Indian squid in the coastal waters of Oman Sea as well as North-West of Indian Ocean.

Safety implications of reactivity variations in fast thorium ADSRs

Nuclear power generation offers a reliable, low-impact and large-scale alternative to fossil fuels. However, concerns exist over the safety and sustainability of this method of power production, and it remains unpopular with some governments and pressure groups throughout the world. Fast thorium fuelled accelerator-driven sub-critical reactors (ADSRs) offer a possible route to providing further re-assurance regarding these concerns on account of their properties of enhanced safety through sub-critical operation combined with reduced actinide waste production from the thorium fuel source. The appropriate sub-critical margin at which these reactors should operate is the subject of continued debate. Commercial interests favour a small sub-critical margin in order to minimise the size of the accelerator needed for a given power output, whilst enhanced safety would be better satisfied through larger sub-critical margins to further minimise the possibility of a criticality excursion. Against this background, this paper examines some of the issues affecting reactor safety inherent within thorium fuel sources resulting from the essential Th90232→Th90233→Pa91233→U92233 breeding chain. Differences in the decay half-lives and fission and capture cross-sections of 233Pa and 233U can result in significant changes in the reactivity of the fuel following changes in the reactor power. Reactor operation is represented using a homogeneous lumped fast reactor model that can simulate the evolution of actinides and reactivity variations to first-order accuracy. The reactivity of the fuel is shown to increase significantly following a loss of power to the accelerator. Where the sub-critical operating margins are small this can result in a criticality excursion unless some form of additional intervention is made, for example through the insertion of control rods. © 2012 Elsevier Ltd. All rights reserved.

Modeling of SFR cores with Serpent-DYN3D codes sequence

DYN3D reactor dynamics nodal diffusion code was originally developed for the analysis of Light Water Reactors. In this paper, we demonstrate the feasibility of using DYN3D for modeling of fast spectrum reactors. A homogenized cross sections data library was generated using continuous energy Monte-Carlo code Serpent which provides significant modeling flexibility compared with traditional deterministic lattice transport codes and tolerable execution time. A representative sodium cooled fast reactor core was modeled with the Serpent-DYN3D code sequence and the results were compared with those produced by ERANOS code and with a 3D full core Monte-Carlo solution. Very good agreement between the codes was observed for the core integral parameters and power distribution suggesting that the DYN3D code with cross section library generated using Serpent can be reliably used for the analysis of fast reactors. © 2012 Elsevier Ltd. All rights reserved.

Coupled neutronic thermo-hydraulic analysis of full PWR core with Monte-Carlo based BGCore system

BGCore reactor analysis system was recently developed at Ben-Gurion University for calculating in-core fuel composition and spent fuel emissions following discharge. It couples the Monte Carlo transport code MCNP with an independently developed burnup and decay module SARAF. Most of the existing MCNP based depletion codes (e.g. MOCUP, Monteburns, MCODE) tally directly the one-group fluxes and reaction rates in order to prepare one-group cross sections necessary for the fuel depletion analysis. BGCore, on the other hand, uses a multi-group (MG) approach for generation of one group cross-sections. This coupling approach significantly reduces the code execution time without compromising the accuracy of the results. Substantial reduction in the BGCore code execution time allows consideration of problems with much higher degree of complexity, such as introduction of thermal hydraulic (TH) feedback into the calculation scheme. Recently, a simplified TH feedback module, THERMO, was developed and integrated into the BGCore system. To demonstrate the capabilities of the upgraded BGCore system, a coupled neutronic TH analysis of a full PWR core was performed. The BGCore results were compared with those of the state of the art 3D deterministic nodal diffusion code DYN3D (Grundmann et al.; 2000). Very good agreement in major core operational parameters including k-eff eigenvalue, axial and radial power profiles, and temperature distributions between the BGCore and DYN3D results was observed. This agreement confirms the consistency of the implementation of the TH feedback module. Although the upgraded BGCore system is capable of performing both, depletion and TH analyses, the calculations in this study were performed for the beginning of cycle state with pre-generated fuel compositions. © 2011 Published by Elsevier B.V.

Comparison among MCNP-based depletion codes applied to burnup calculations of pebble-bed HTR lattices

The double-heterogeneity characterising pebble-bed high temperature reactors (HTRs) makes Monte Carlo based calculation tools the most suitable for detailed core analyses. These codes can be successfully used to predict the isotopic evolution during irradiation of the fuel of this kind of cores. At the moment, there are many computational systems based on MCNP that are available for performing depletion calculation. All these systems use MCNP to supply problem dependent fluxes and/or microscopic cross sections to the depletion module. This latter then calculates the isotopic evolution of the fuel resolving Bateman's equations. In this paper, a comparative analysis of three different MCNP-based depletion codes is performed: Montburns2.0, MCNPX2.6.0 and BGCore. Monteburns code can be considered as the reference code for HTR calculations, since it has been already verified during HTR-N and HTR-N1 EU project. All calculations have been performed on a reference model representing an infinite lattice of thorium-plutonium fuelled pebbles. The evolution of k-inf as a function of burnup has been compared, as well as the inventory of the important actinides. The k-inf comparison among the codes shows a good agreement during the entire burnup history with the maximum difference lower than 1%. The actinide inventory prediction agrees well. However significant discrepancy in Am and Cm concentrations calculated by MCNPX as compared to those of Monteburns and BGCore has been observed. This is mainly due to different Am-241 (n,γ) branching ratio utilized by the codes. The important advantage of BGCore is its significantly lower execution time required to perform considered depletion calculations. While providing reasonably accurate results BGCore runs depletion problem about two times faster than Monteburns and two to five times faster than MCNPX. © 2009 Elsevier B.V. All rights reserved.

Use of axially graded burnable boron for hot-spot temperature reduction in a pressurized water reactor core

Shortly after the loading of a pressurized water reactor (PWR) core, the axial power distribution in fresh fuel has already attained the characteristic, almost flat shape, typical of burned fuel. At beginning of cycle (BOC), however, the axial distribution is centrally peaked. In assemblies hosting uniform burnable boron rods, this BOC peaking is even more pronounced. A reduction in the axial peaking is today often achieved by shortening the burnable boron rods by some 30 cm at each edge. It is shown that a two-zone grading of the boron rod leads, in a representative PWR cycle, to a reduction of the hot-spot temperature of approximately 70 °C, compared with the nongraded case. However, with a proper three-zone grading of the boron rod, an additional 20 °C may be cut off the hot-spot temperature. Further, with a slightly skewed application of this three-zone grading, an additional 50 °C may be cut off. The representative PWR cycle studied was cycle 11 of the Indian Point 2 station, with a simplification in the number of fuel types and in the burnup distribution. The analysis was based on a complete three-dimensional burnup calculation. The code system was ELCOS, with BOXER as an assembly code for the generation of burnup-dependent cross sections and SILWER as a three-dimensional core code with thermal-hydraulic feedback.

Application of axial discontinuity factors for high conversion water reactors

The paper shows that generating cross sections using three-dimensional geometry and application of axial discontinuity factors are essential requirements for obtaining accurate prediction of criticality and zone average reaction rates in highly heterogeneous RBWR-type systems using computer codes based on diffusion theory approximation. The same methodology as presented here will be used to generate discontinuity factors for each axial interface between fuel assembly zones to ensure preservation of reaction rates in each zone and global multiplication factor. The use of discontinuity factors and three-dimensional cross sections may allow for a coarser energy group structure which is desirable to simplify and speed up transient calculations.