Control of Bubbling Fluidized Bed Conditions

The objectives of this master’s thesis were to understand the importance of bubbling fluidized bed (BFB) conditions and to find out how digital image processing and acoustic emission technology can help in monitoring the bed quality. An acoustic emission (AE) measurement system and a bottom ash camera system were evaluated in acquiring information about the bed conditions. The theory part of the study describes the fundamentals of BFB boiler and evaluates the characteristics of bubbling bed. Causes and effects of bed material coarsening are explained. The ways and methods to monitor the behaviour of BFB are determined. The study introduces the operating principles of AE technology and digital image processing. The empirical part of the study describes an experimental arrangement and results of a case study at an industrial BFB boiler. Sand consumption of the boiler was reduced by optimization of bottom ash handling and sand feeding. Furthermore, data from the AE measurement system and the bottom ash camera system was collected. The feasibility of these two systems was evaluated. The particle size of bottom ash and the changes in particle size distribution were monitored during the test period. Neither of the systems evaluated was ready to serve in bed quality control accurately or fast enough. Particle size distributions according to the bottom ash camera did not correspond to the results of manual sieving. Comprehensive interpretation of the collected AE data requires much experience. Both technologies do have potential and with more research and development they may enable acquiring reliable and real-time information about the bed conditions. This information could help to maintain disturbance-free combustion process and to optimize bottom ash handling system.

An exploratory study for the discovery of non-invasive hepatocellular carcinoma biomarkers among high-risk hepatitis C virus infected patients

Hepatocellular Carcinoma (HCC) is a major healthcare problem, representing the third most common cause of cancer-related mortality worldwide. Chronic infections with Hepatitis B virus (HBV) and/or Hepatitis C virus (HCV) are the major risk factors for the development of HCC. The incidence of HBV -associated HCC is in decline as a result of an effective HBV vaccine; however, since an equally effective HCV vaccine has not yet been developed, there are 130 million HCV infected patients worldwide who are at a high-risk for developing HCC. Because reliable parameters and/or tools for the early detection of HCC among high-risk individuals are severely lacking, HCC patients are always diagnosed at a late stage where surgical solutions or effective treatment are not possible. Using urine as a non-invasive sample source, two different approaches (proteomic-based and genomic-based approaches) were pursued with the common goal of discovering potential biomarker candidates for the early detection of HCC among high-risk chronic HCV infected patients. Urine was collected from 106 HCV infected Egyptian patients, 32 of whom had already developed HCC and 74 patients who were diagnosed as HCC-free at the time of initial sample collection. In addition to these patients, urine samples were also collected from 12 healthy control individuals. Total urinary proteins, Trans-renal nucleic acid (Tr-NA) and microRNA (miRNA) were isolated from urine using novel methodologies and silicon carbide-loaded spin columns. In the first, "proteomic-based", approach, liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) was used to identify potential candidates from pooled urine samples. This was followed by validating relative expression levels of proteins present in urine among all the patients using quantitative real time-PCR (qRT-PCR). This approach revealed that significant over-expression of three proteins: DJ-1, Chromatin Assembly Factor-1 (CAF-1) and 11 Moemen Abdalla HCC Biomarkers Heat Shock Protein 60 (HSP60), were characteristic events among HCC-post HCV infected patients. As a single-based HCC biomarker, CAF-1 over-expression identified HCC among HCV infected patients with a specificity of 90%, sensitivity of 66% and with an overall diagnostic accuracy of 78%. Moreover, the CAF-lIHSP60 tandem identified HCC among HCV infected patients with a specificity of 92%, sensitivity of 61 % and with an overall diagnostic accuracy of 77%. In the second genomic-based approach, two different approaches were processed. The first approach was the miRNA-based approach. The expression levels of miRNAs isolated from urine were studied using the Illumina MicroRNA Expression Profiling Assay. This was followed by qRT-PCR-based validation of deregulated expression of identified miRNA candidates among all the patients. This approach shed the light on the deregulated expression of a number of miRNAs, which may have a role in either the development of HCC among HCV infected patients (i.e. miR-640, miR-765, miR-200a, miR-521 and miR-520) or may allow for a better understanding of the viral-host interaction (miR-152, miR-486, miR-219, miR452, miR-425, miR-154 and miR-31). Moreover, the deregulated expression of both miR-618 and miR-650 appeared to be a common event among HCC-post HCV infected patients. The results of the search for putative targets of these two miRNA suggested that miR-618 may be a potent oncogene, as it targets the tumor-suppressor gene Low density lipoprotein-related protein 12 (LPR12), while miR-650 may be a potent tumor-suppressor gene, as it is supposed to downregulate the TNF receptor-associated factor-4 (TRAF4) oncogene. The specificity of miR-618 and miR-650 deregulated expression patterns for the early detection of HCC among HCV infected patients was 68% and 58%, respectively, whereas the sensitivity was 64% and 72%, respectively. When the deregulated expression of both miRNAs was combined as a tandem biomarker, the specificity and the sensitivity were 75% and 58% respectively. 111 Moemen Abdalla HCC Biomarkers In the second, "Trans-renal nucleic acid-based", approach, the urinary apoptotic nucleic acid (uaNA) levels of 70ng/mL or more were found to be a good predictor of HCC among chronic HCV infected patients. The specificity and the sensitivity of this diagnostic approach were 76% and 86%, respectively, with an overall diagnostic value of 81 %. The uaNA levels positively correlated to HCC disease progression as monitored by epigenetic changes of a panel of eight tumor-suppressor genes (TSGs) using methylation-sensitive PCR. Moreover, the pairing of high uaNA levels (:::: 70 ng/mL) and CAF-1 over-expreSSIOn produced a highly specific (l 00%) multiple-based HCC biomarker with an acceptable sensitivity of 64%, and with a diagnostic accuracy of 82%. In comparison to the previous pairing, the uaNA levels (:::: 70 ng/mL) in tandem with HSP60 over-expression was less specific (89%) but highly sensitive (72%), resulting in a diagnostic accuracy of 64%. The specificities of miR-650 deregulated expression in combination with either high uaNA content or HSP 60 over-expression were 82% and 79%, respectively, whereas, the sensitivities of these combinations were 64% and 58%, respectively. The potential biomarkers identified in this study compare favorably with the diagnostic accuracy of the a-fetoprotein levels test, which has a specificity of 75%, sensitivity of 68% and an overall diagnostic accuracy of 70%. Here we present an intriguing study which shows the significance of using urine as a noninvasive sample source for the identification of promising HCC biomarkers. We have also introduced new techniques for the isolation of different urinary macromolecules, especially miRNA, from urine. Furthermore, we strongly recommend the potential biomarkers indentified in this study as focal points of any future research on HCC diagnosis. A larger testing pool will determine if their use is practical for mass population screening. This explorative study identified potential targets that merit further investigation for the development of diagnostically accurate biomarkers isolated from 1-2 mL urine samples that were acquired in a non-invasive manner.

Cognitive Behavior Therapy for Obsessive-Compulsive Behavior in Children with Autism Spectrum Disorder: A Comparison of Hierarchical Linear Modelling and Visual Analysis

Behavioral researchers commonly use single subject designs to evaluate the effects of a given treatment. Several different methods of data analysis are used, each with their own set of methodological strengths and limitations. Visual inspection is commonly used as a method of analyzing data which assesses the variability, level, and trend both within and between conditions (Cooper, Heron, & Heward, 2007). In an attempt to quantify treatment outcomes, researchers developed two methods for analysing data called Percentage of Non-overlapping Data Points (PND) and Percentage of Data Points Exceeding the Median (PEM). The purpose of the present study is to compare and contrast the use of Hierarchical Linear Modelling (HLM), PND and PEM in single subject research. The present study used 39 behaviours, across 17 participants to compare treatment outcomes of a group cognitive behavioural therapy program, using PND, PEM, and HLM on three response classes of Obsessive Compulsive Behaviour in children with Autism Spectrum Disorder. Findings suggest that PEM and HLM complement each other and both add invaluable information to the overall treatment results. Future research should consider using both PEM and HLM when analysing single subject designs, specifically grouped data with variability.

Contribution of tachykinin and kinin receptors in central autonomic control of blood pressure and behavioural activity in hypertensive rats

This work aims at studing the role of tachykinin NK-3 receptor (R) and kinin B1R in central autonomic regulation of blood pressure (BP) and to determine whether the B1R is overexpressed and functional in rat models of hypertension by measuring the effect of a B1R agonist on behavioural activity. Assumptions: (1) NK-3R located in the ventral tegmental area (VTA) modulates the mesolimbic dopaminergic system and has a tonic activity in hypertension; (2) B1R is overexpressed in the brain of hypertensive rats and has a tonic activity, which contributes to hypertension via a dopamine mechanism; (3) the inhibition of NK-3R and B1R with selective antagonists, reduces central dopaminergic hyperactivity and reverses hypertension. A model of genetic hypertension and a model of experimental hypertension were used: spontaneously hypertensive rats (SHR, 16 weeks) and Wistar-Kyoto (WKY) rats infused for 14 days with angiotensin II (Ang II) (200 ng / kg / min, subcutaneous (s.c.) with Alzet mini pump). The age-matched untreated WKY rats served as common controls. In the first study (article # 1), the cardiovascular response in SHR was evaluated following intracebroventricular (i.c.v.) and/or intra-VTA injection of an agonist (senktide) and antagonists (SB222200 and R-820) of NK-3R. These responses have also been characterized using selective dopamine antagonists DA-D1R (SCH23390), DA-D2R (raclopride) or non-selective dopamine DA-D2R (haloperidol). Also the VTA has been destroyed by ibotenic acid. The pressor response induced by senktide and the anti-hypertensive response induced by SB222200 or R-820 were more pronounced by intra-VTA. These responses were prevented by pre-treatment with raclopride and haloperidol. The lesion of the VTA has prevented the pressor response relayed by senktide (i.c.v.) and the anti-hypertensive effect of R-820 (i.c.v.). In addition, SB222200 (intra-VTA) prevented the pressor response of senktide (i.c.v.) and conversely, senktide (i.c.v.) prevented the antihypertensive effect of SB222200 (intra-VTA). The second study (article # 2) showed that the B1R antagonist (SSR240612) administered by gavage or i.c.v. reverses hypertension in both models. This anti-hypertensive effect was prevented by raclopride and haloperidol. In contrast, the two B1R antagonists (R-715 and R-954) injected s.c., which do not cross the blood-brain barrier reduced weakly blood pressure in hypertensive rats. In the third study (article # 3), the i.c.v. injection of a selective kinin B1R agonist Sar[DPhe8][des-Arg9]BK caused behavioural responses in SHR and Ang II-treated rats and had no effect in control WKY rats . The responses elicited by B1R agonist were blocked by an antagonist of NK-1 (RP67580), an antagonist of NMDA glutamate receptor (DL-AP5), an inhibitor of nitric oxide synthase (NOS) (L -NNA) as well as raclopride and SCH23390.The responses were modestly affected by the inhibitor of inducible NOS (iNOS). The B1R mRNA (measured by RT-PCR) was significantly increased in the hypothalamus, the VTA and the nucleus accumbens of hypertensive animals (SHR and treated with Ang II) compared with control rats. These neuropharmacological studies suggest that: (1) the NK-3R from the VTA is involved in the maintenance of hypertension in SHR by increasing DA transmission in the midbrain; (2) the B1R in SHR and Ang II-treated rats contributes to hypertension via a central mechanism involving DA-D2R; (3) the central B1R increases locomotor activity and nocifensive behaviours via the release of substance P (NK-1), DA and nitric oxide in both rat models of hypertension. Thus, the brain tachykinin NK-3R and kinin B1R represent potential therapeutic targets for the treatment of hypertension. The modulation of the mesolimbic/mesocortical dopaminergic pathway by these receptors suggests their involvement in other physiological functions (pleasure, motor activity, coordination of the response to stress) and pathophysiology (anxiety, depression).

The neurobiology of meditation for the control of pain

La douleur est une expérience multidimensionnelle comportant des aspects sensoriels, émotionnels et cognitifs. Il a été montré que cette expérience peut être modulée par des facteurs psychologiques ou des interventions cognitives comme l’attention, la distraction, l’hypnose ou les attentes. La tradition orientale suggère également que la pratique de la méditation pourrait avoir des effets analgésiques. D’un point de vue théorique, plusieurs mécanismes pourraient expliquer ces effets. Cependant, très peu d’études ont testé ces hypothèses. Les études présentées dans cette thèse avaient donc pour objectif d’examiner les mécanismes analgésiques de la méditation. Dans un premier temps, une étude psychophysique a été réalisée afin de comparer les réponses à la douleur entre des adeptes de la méditation Zen et des sujets contrôles, dans différentes conditions attentionnelles. Durant la condition attentionnelle de type « mindful », les adeptes de la méditation ont présenté une plus faible sensibilité à la douleur, des réponses attentionnelles à la douleur atypiques et une diminution de la perception de la douleur associée à l’entraînement à la méditation. Une deuxième étude a été réalisée en imagerie par résonance magnétique fonctionnelle (IRMf) avec des groupes de participants similaires. Dans une condition sans méditation, les adeptes de la méditation ont présenté de plus fortes réponses nociceptives dans les régions primaires de la douleur. Les régions cérébrales associées aux processus d’évaluation, à la mémoire et aux émotions ont quant à elles montré une diminution d’activité. De plus, cette diminution était plus importante chez les adeptes de la méditation les plus expérimentés et elle était associée à des évaluations de douleur plus faibles. Par ailleurs, des changements de connectivité fonctionnelle entre le cortex préfrontal et une région primaires de la douleur étaient associés à la sensibilité à la douleur chez les adeptes de la méditation. Finalement, une étude d’imagerie cérébrale structurale (publiée comme deux études séparées) a été réalisée pour examiner les différences d’épaisseur corticale entre les groupes, pour des régions associées à la douleur. Les adeptes de la méditation ont présenté une épaisseur plus importante de matière grise dans plusieurs régions associées à la douleur et l’attention. De plus, ces différences étaient associées à une mesure expérientielle de l’attention, à la sensibilité à la douleur et à l’expérience de méditation. Dans l’ensemble, ces résultats suggèrent que la méditation pourrait influencer la perception de la douleur par des changements fonctionnels et physiques dans le cerveau. De plus, le patron d’activation et la modulation de l’expérience paraissent uniques en comparaison à ceux d’autres interventions, ce qui suggère qu’un état de détachement et un focus mental favorisent la dissociation entre les aspects désagréables et sensoriels d’un stimulus nociceptif.

Les modèles vectoriels et multiplicatifs avec erreurs non-négatives de séries chronologiques.

L'objectif du présent mémoire vise à présenter des modèles de séries chronologiques multivariés impliquant des vecteurs aléatoires dont chaque composante est non-négative. Nous considérons les modèles vMEM (modèles vectoriels et multiplicatifs avec erreurs non-négatives) présentés par Cipollini, Engle et Gallo (2006) et Cipollini et Gallo (2010). Ces modèles représentent une généralisation au cas multivarié des modèles MEM introduits par Engle (2002). Ces modèles trouvent notamment des applications avec les séries chronologiques financières. Les modèles vMEM permettent de modéliser des séries chronologiques impliquant des volumes d'actif, des durées, des variances conditionnelles, pour ne citer que ces applications. Il est également possible de faire une modélisation conjointe et d'étudier les dynamiques présentes entre les séries chronologiques formant le système étudié. Afin de modéliser des séries chronologiques multivariées à composantes non-négatives, plusieurs spécifications du terme d'erreur vectoriel ont été proposées dans la littérature. Une première approche consiste à considérer l'utilisation de vecteurs aléatoires dont la distribution du terme d'erreur est telle que chaque composante est non-négative. Cependant, trouver une distribution multivariée suffisamment souple définie sur le support positif est plutôt difficile, au moins avec les applications citées précédemment. Comme indiqué par Cipollini, Engle et Gallo (2006), un candidat possible est une distribution gamma multivariée, qui impose cependant des restrictions sévères sur les corrélations contemporaines entre les variables. Compte tenu que les possibilités sont limitées, une approche possible est d'utiliser la théorie des copules. Ainsi, selon cette approche, des distributions marginales (ou marges) peuvent être spécifiées, dont les distributions en cause ont des supports non-négatifs, et une fonction de copule permet de tenir compte de la dépendance entre les composantes. Une technique d'estimation possible est la méthode du maximum de vraisemblance. Une approche alternative est la méthode des moments généralisés (GMM). Cette dernière méthode présente l'avantage d'être semi-paramétrique dans le sens que contrairement à l'approche imposant une loi multivariée, il n'est pas nécessaire de spécifier une distribution multivariée pour le terme d'erreur. De manière générale, l'estimation des modèles vMEM est compliquée. Les algorithmes existants doivent tenir compte du grand nombre de paramètres et de la nature élaborée de la fonction de vraisemblance. Dans le cas de l'estimation par la méthode GMM, le système à résoudre nécessite également l'utilisation de solveurs pour systèmes non-linéaires. Dans ce mémoire, beaucoup d'énergies ont été consacrées à l'élaboration de code informatique (dans le langage R) pour estimer les différents paramètres du modèle. Dans le premier chapitre, nous définissons les processus stationnaires, les processus autorégressifs, les processus autorégressifs conditionnellement hétéroscédastiques (ARCH) et les processus ARCH généralisés (GARCH). Nous présentons aussi les modèles de durées ACD et les modèles MEM. Dans le deuxième chapitre, nous présentons la théorie des copules nécessaire pour notre travail, dans le cadre des modèles vectoriels et multiplicatifs avec erreurs non-négatives vMEM. Nous discutons également des méthodes possibles d'estimation. Dans le troisième chapitre, nous discutons les résultats des simulations pour plusieurs méthodes d'estimation. Dans le dernier chapitre, des applications sur des séries financières sont présentées. Le code R est fourni dans une annexe. Une conclusion complète ce mémoire.

Unfolded singularities of analytic differential equations

La thèse est composée d’un chapitre de préliminaires et de deux articles sur le sujet du déploiement de singularités d’équations différentielles ordinaires analytiques dans le plan complexe. L’article Analytic classification of families of linear differential systems unfolding a resonant irregular singularity traite le problème de l’équivalence analytique de familles paramétriques de systèmes linéaires en dimension 2 qui déploient une singularité résonante générique de rang de Poincaré 1 dont la matrice principale est composée d’un seul bloc de Jordan. La question: quand deux telles familles sontelles équivalentes au moyen d’un changement analytique de coordonnées au voisinage d’une singularité? est complètement résolue et l’espace des modules des classes d’équivalence analytiques est décrit en termes d’un ensemble d’invariants formels et d’un invariant analytique, obtenu à partir de la trace de la monodromie. Des déploiements universels sont donnés pour toutes ces singularités. Dans l’article Confluence of singularities of non-linear differential equations via Borel–Laplace transformations on cherche des solutions bornées de systèmes paramétriques des équations non-linéaires de la variété centre de dimension 1 d’une singularité col-noeud déployée dans une famille de champs vectoriels complexes. En général, un système d’ÉDO analytiques avec une singularité double possède une unique solution formelle divergente au voisinage de la singularité, à laquelle on peut associer des vraies solutions sur certains secteurs dans le plan complexe en utilisant les transformations de Borel–Laplace. L’article montre comment généraliser cette méthode et déployer les solutions sectorielles. On construit des solutions de systèmes paramétriques, avec deux singularités régulières déployant une singularité irrégulière double, qui sont bornées sur des domaines «spirals» attachés aux deux points singuliers, et qui, à la limite, convergent vers une paire de solutions sectorielles couvrant un voisinage de la singularité confluente. La méthode apporte une description unifiée pour toutes les valeurs du paramètre.

Understanding the transcriptional control of EIF4E and its dysregulation in acute myeloid leukemia: role of NF-κB

EIF4E, le facteur d’initiation de la traduction chez les eucaryotes est un oncogène puissant et qui se trouve induit dans plusieurs types de cancers, parmi lesquels les sous-types M4 et M5 de la leucémie aiguë myéloblastique (LAM). EIF4E est régulé à plusieurs niveaux cependant, la régulation transcriptionnelle de ce gène est peu connue. Mes résultats montrent que EIF4E est une cible transcriptionnelle directe du facteur nucléaire « kappa-light- chain- enhancer of activated B cells » (NF-κB).Dans les cellules hématopoïétiques primaires et les lignées cellulaires, les niveaux de EIF4E sont induits par des inducteurs de NF-κB. En effet, l’inactivation pharmaceutique ou génétique de NF-κB réprime l’activation de EIF4E. En effet, suite à l’activation de NF-κB chez l’humain, le promoteur endogène de EIF4E recrute p65 (RelA) et c-Rel aux sites évolutionnaires conservés κB in vitro et in vivo en même temps que p300 ainsi que la forme phosphorylée de Pol II. De plus, p65 est sélectivement associé au promoteur de EIF4E dans les sous-types LAM M4/M5 mais non pas dans les autres sous-types LAM ou dans les cellules hématopoïétiques primaires normales. Ceci indique que ce processus représente un facteur essentiel qui détermine l’expression différentielle de EIF4E dans la LAM. Les analyses de données d’expressions par séquençage de l’ARN provenant du « Cancer Genome Atlas » (TCGA) suggèrent que les niveaux d’ARNm de EIF4E et RELA se trouvent augmentés dans les cas LAM à pronostic intermédiaire ou faible mais non pas dans les groupes cytogénétiquement favorables. De plus, des niveaux élevés d’ARNm de EIF4E et RELA sont significativement associés avec un taux de survie relativement bas chez les patients. En effet, les sites uniques κB se trouvant dans le promoteur de EIF4E recrutent le régulateur de transcription NF-κB p65 dans 47 nouvelles cibles prévues. Finalement, 6 nouveaux facteurs de transcription potentiellement impliqués dans la régulation du gène EIF4E ont été prédits par des analyses de données ChIP-Seq provenant de l’encyclopédie des éléments d’ADN (ENCODE). Collectivement, ces résultats fournissent de nouveaux aperçus sur le control transcriptionnel de EIF4E et offrent une nouvelle base moléculaire pour sa dérégulation dans au moins un sous-groupe de spécimens de LAM. L’étude et la compréhension de ce niveau de régulation dans le contexte de spécimens de patients s’avère important pour le développement de nouvelles stratégies thérapeutiques ciblant l’expression du gène EIF4E moyennant des inhibiteurs de NF-κB en combinaison avec la ribavirine.

Synchronization and control of chaos in coupled chaotic multimode Nd:YAG lasers

In this Letter we numerically investigate the dynamics of a system of two coupled chaotic multimode Nd:YAG lasers with two mode and three mode outputs. Unidirectional and bidirectional coupling schemes are adopted; intensity time series plots, phase space plots and synchronization plots are used for studying the dynamics. Quality of synchronization is measured using correlation index plots. It is found that for laser with two mode output bidirectional direct coupling scheme is found to be effective in achieving complete synchronization, control of chaos and amplification in output intensity. For laser with three mode output, bidirectional difference coupling scheme gives much better chaotic synchronization as compared to unidirectional difference coupling but at the cost of higher coupling strength. We also conclude that the coupling scheme and system properties play an important role in determining the type of synchronization exhibited by the system.

Analysis of System Signals Based on Cross Recurrence Method for System Dynamics Characterization

Natural systems are inherently non linear. Recurrent behaviours are typical of natural systems. Recurrence is a fundamental property of non linear dynamical systems which can be exploited to characterize the system behaviour effectively. Cross recurrence based analysis of sensor signals from non linear dynamical system is presented in this thesis. The mutual dependency among relatively independent components of a system is referred as coupling. The analysis is done for a mechanically coupled system specifically designed for conducting experiment. Further, cross recurrence method is extended to the actual machining process in a lathe to characterize the chatter during turning. The result is verified by permutation entropy method. Conventional linear methods or models are incapable of capturing the critical and strange behaviours associated with the dynamical process. Hence any effective feature extraction methodologies should invariably gather information thorough nonlinear time series analysis. The sensor signals from the dynamical system normally contain noise and non stationarity. In an effort to get over these two issues to the maximum possible extent, this work adopts the cross recurrence quantification analysis (CRQA) methodology since it is found to be robust against noise and stationarity in the signals. The study reveals that the CRQA is capable of characterizing even weak coupling among system signals. It also divulges the dependence of certain CRQA variables like percent determinism, percent recurrence and entropy to chatter unambiguously. The surrogate data test shows that the results obtained by CRQA are the true properties of the temporal evolution of the dynamics and contain a degree of deterministic structure. The results are verified using permutation entropy (PE) to detect the onset of chatter from the time series. The present study ascertains that this CRP based methodology is capable of recognizing the transition from regular cutting to the chatter cutting irrespective of the machining parameters or work piece material. The results establish this methodology to be feasible for detection of chatter in metal cutting operation in a lathe.

Fluid mechanics-non-linear waves studies on korteweg-de vries equations

In this thesis the author has presented qualitative studies of certain Kdv equations with variable coefficients. The well-known KdV equation is a model for waves propagating on the surface of shallow water of constant depth. This model is considered as fitting into waves reaching the shore. Renewed attempts have led to the derivation of KdV type equations in which the coefficients are not constants. Johnson's equation is one such equation. The researcher has used this model to study the interaction of waves. It has been found that three-wave interaction is possible, there is transfer of energy between the waves and the energy is not conserved during interaction.

Study of Synchronisalion and Control of Chaos in Directly Modulated Semiconductor Lasers

Chaos is a subject oftopical interest and, studied in great detail in relation to its relevance in almost all branches of science, which include physical, chemical, and biological fields. Chaos in the literal sense signifies utter confusion, but the scientific community has differentiated chaos as deterministic chaos and white noise. Deterministic chaos implies the complex behaviour of systems, which are governed by deterministic laws. Behaviour of such systems often become unpredictable in the long run. This unpredictability arises from the sensitivity of the system to its initial conditions. The essential requirement for ‘sensitivity to initial condition’ is nonlinearity of the system. The only method for determining the future of such systems is numerically simulating its final state from a set ofinitial conditions. Synchronisation

Polyphase Implementation of Non-recursive Comb Decimators for Sigma-Delta A/D Converters

In a sigma-delta analog to digital (A/D) As most of the sigma-delta ADC applications require converter, the most computationally intensive block is decimation filters with linear phase characteristics, the decimation filter and its hardware implementation symmetric Finite Impulse Response (FIR) filters are may require millions of transistors. Since these widely used for implementation. But the number of FIR converters are now targeted for a portable application, filter coefficients will be quite large for implementing a a hardware efficient design is an implicit requirement. narrow band decimation filter. Implementing decimation In this effect, this paper presents a computationally filter in several stages reduces the total number of filter efficient polyphase implementation of non-recursive coefficients, and hence reduces the hardware complexity cascaded integrator comb (CIC) decimators for and power consumption [2]. Sigma-Delta Converters (SDCs). The SDCs are The first stage of decimation filter can be operating at high oversampling frequencies and hence implemented very efficiently using a cascade of integrators require large sampling rate conversions. The filtering and comb filters which do not require multiplication or and rate reduction are performed in several stages to coefficient storage. The remaining filtering is performed reduce hardware complexity and power dissipation. either in single stage or in two stages with more complex The CIC filters are widely adopted as the first stage of FIR or infinite impulse response (IIR) filters according to decimation due to its multiplier free structure. In this the requirements. The amount of passband aliasing or research, the performance of polyphase structure is imaging error can be brought within prescribed bounds by compared with the CICs using recursive and increasing the number of stages in the CIC filter. The non-recursive algorithms in terms of power, speed and width of the passband and the frequency characteristics area. This polyphase implementation offers high speed outside the passband are severely limited. So, CIC filters operation and low power consumption. The polyphase are used to make the transition between high and low implementation of 4th order CIC filter with a sampling rates. Conventional filters operating at low decimation factor of '64' and input word length of sampling rate are used to attain the required transition '4-bits' offers about 70% and 37% of power saving bandwidth and stopband attenuation. compared to the corresponding recursive and Several papers are available in literature that deals non-recursive implementations respectively. The same with different implementations of decimation filter polyphase CIC filter can operate about 7 times faster architecture for sigma-delta ADCs. Hogenauer has than the recursive and about 3.7 times faster than the described the design procedures for decimation and non-recursive CIC filters.

Nonlinear and magneto-optical transmission studies on magnetic nanofluids of non-interacting metallic nickel nanoparticles

Oxide free stable metallic nanofluids have the potential for various applications such as in thermal management and inkjet printing apart from being a candidate system for fundamental studies. A stable suspension of nickel nanoparticles of ∼5 nm size has been realized by a modified two-step synthesis route. Structural characterization by x-ray diffraction and transmission electron microscopy shows that the nanoparticles are metallic and are phase pure. The nanoparticles exhibited superparamagnetic properties. The magneto-optical transmission properties of the nickel nanofluid (Ni-F) were investigated by linear optical dichroism measurements. The magnetic field dependent light transmission studies exhibited a polarization dependent optical absorption, known as optical dichroism, indicating that the nanoparticles suspended in the fluid are non-interacting and superparamagnetic in nature. The nonlinear optical limiting properties of Ni-F under high input optical fluence were then analyzed by an open aperture z-scan technique. The Ni-F exhibits a saturable absorption at moderate laser intensities while effective two-photon absorption is evident at higher intensities. The Ni-F appears to be a unique material for various optical devices such as field modulated gratings and optical switches which can be controlled by an external magnetic field