Trajectory and Force Control of a Direct Drive Arm

Using the MIT Serial Link Direct Drive Arm as the main experimental device, various issues in trajectory and force control of manipulators were studied in this thesis. Since accurate modeling is important for any controller, issues of estimating the dynamic model of a manipulator and its load were addressed first. Practical and effective algorithms were developed fro the Newton-Euler equations to estimate the inertial parameters of manipulator rigid-body loads and links. Load estimation was implemented both on PUMA 600 robot and on the MIT Serial Link Direct Drive Arm. With the link estimation algorithm, the inertial parameters of the direct drive arm were obtained. For both load and link estimation results, the estimated parameters are good models of the actual system for control purposes since torques and forces can be predicted accurately from these estimated parameters. The estimated model of the direct drive arm was them used to evaluate trajectory following performance by feedforward and computed torque control algorithms. The experimental evaluations showed that the dynamic compensation can greatly improve trajectory following accuracy. Various stability issues of force control were studied next. It was determined that there are two types of instability in force control. Dynamic instability, present in all of the previous force control algorithms discussed in this thesis, is caused by the interaction of a manipulator with a stiff environment. Kinematics instability is present only in the hybrid control algorithm of Raibert and Craig, and is caused by the interaction of the inertia matrix with the Jacobian inverse coordinate transformation in the feedback path. Several methods were suggested and demonstrated experimentally to solve these stability problems. The result of the stability analyses were then incorporated in implementing a stable force/position controller on the direct drive arm by the modified resolved acceleration method using both joint torque and wrist force sensor feedbacks.

Modelling scenarios of diffusion and control of pandemic influenza, italy

En aquest article es resumeixen els resultats publicats en un informe de l' ISS (Istituto Superiore di Sanità) del desembre de 2006, sobre un model matemàtic desenvolupat per un grup de treball que inclou a investigadors de les Universitats de Trento, Pisa i Roma, i els Instituts Nacionals de Salut (Istituto Superiore di Sanità, ISS), per avaluar i mesurar l'impacte de la transmissió i el control de la pandèmia de grip

Identification and Semiactive Control of Smart Structures Equipped with Magnetorheological Actuators

This paper deals with the problem of identification and semiactive control of smart structures subject to unknown external disturbances such as earthquake, wind, etc. The experimental setup used is a 6-story test structure equipped with shear-mode semiactive magnetorheological actuators being installed in WUSCEEL. The experimental results obtained have verified the effectiveness of the proposed control algorithms

Decentralized model reference control of flexible cable-stayed beam structures

A decentralized model reference controller is designed to reduce the magnitude of the transversal vibration of a flexible cable-stayed beam structure induced by a seismic excitation. The controller design is made based on the principle of sliding mode such that a priori knowledge

Active control of structures with uncertain coupled subsystems and actuator dynamics

This paper deals with the problem of stabilizing a class of structures subject to an uncertain excitation due to the temporary coupling of the main system with another uncertain dynamical subsystem. A Lyapunov function based control scheme is proposed to attenuate the structural vibration. In the control design, the actuator dynamics is taken into account. The control scheme is implemented by using only feedback information of the main system. The effectiveness of the control scheme is shown for a bridge platform with crossing vehicle

Predictive motion control of a mirosot mobile robot

This paper discusses predictive motion control of a MiRoSoT robot. The dynamic model of the robot is deduced by taking into account the whole process - robot, vision, control and transmission systems. Based on the obtained dynamic model, an integrated predictive control algorithm is proposed to position precisely with either stationary or moving obstacle avoidance. This objective is achieved automatically by introducing distant constraints into the open-loop optimization of control inputs. Simulation results demonstrate the feasibility of such control strategy for the deduced dynamic model

Academics' online presence guidelines: A four step guide to taking control of your visibility

OpenUCT published Academics' online presence guidelines: A four step guide to taking control of your visibility in 2012.

What are the priorities for prevention and control of non-communicable diseases and injuries in sub-Saharan Africa and South East Asia?

Last year’s UN high level meeting sought to galvanise the international community into scaling up its response to the escalating global burden of non-communicable diseases. With resources tight, D Chisholm and colleagues examine which interventions should be given priority for action and investment

Connectivity of BA46 involvement in the executive control of language

Resumen tomado de la publicaci??n

Development of a decision support system for the integrated control of membrane bioreactors

The work presented in this PhD thesis includes various partial studies aimed at developing a decision support system for membrane bioreactor integrated control. The decision support systems (DSS) have as a main goal to facilitate the operation of complex processes due to the multiple variables that are processed. For this reason, the research used has focused on aspects related to nutrient removal, and on the development of indicators or sensors capable of facilitating, automating and controlling the filtration process in an integrated way with the biological processes that taking place. Work has also been done on the design, development, implementation and validation of tools based on the knowledge made available by the automatic control and the supervision of the MBRs

Operation and control of SBR processes for enhanced biological nutrient removal from wastewater

In the last decades, the awareness of environmental issues has increased in society considerably. There is an increasing need to improve the effluent quality of domestic wastewater treatment processes. This thesis describes the application of the Sequencing Batch Reactor (SBR) technology for Biological Nutrient Removal (BNR) from the wastewater. In particular, the work presented evolves from the nitrogen removal to the biological nutrient removal (i.e. nitrogen plus phosphorous removal) with special attention to the operational strategy design, the identification of possible reactor cycle controls or the influent composition related to the process efficiency. In such sense, also the use of ethanol as an external carbon (when low influent Carbon:Phosphorus (C:P) or Carbon:Nitrogen (C:N) ratios are presented) are studied as an alternative to maintain the BNR efficiency.

Characterization and efficacy of bacterial strains for biological control of soil-borne diseases caused by Phytophthora cactorum and Meloidogyne javanica on Rosaceous plants

S'avaluaren 58 soques de Pseudomonas fluorescens i Pantoea agglomerans per la seva eficàcia en el biocontrol de la malaltia causada per l'oomicet Phytophthora cactorum en maduixera i pel nematode formador de gal·les Meloidogyne javanica en el portaempelt GF-677. Es desenvolupà un mètode ex vivo d'inoculació de fulla amb l'objectiu de seleccionar soques bacterianes com a agents de control biològic de P. cactorum en maduixera. Tres soques de P. fluorescens es seleccionaren com a soques eficaces en el biocontrol del patogen en fulles i en la reducció de la malaltia en plantes de maduixera. La combinació de soques semblà millorar la consistència del biocontrol en comparació amb les soques aplicades individualment. Tres soques de P. fluorescens es seleccionaren per la seva eficàcia en la reducció de la infecció de M. javanica en portaempelts GF-677. La combinació d'aquestes soques no incrementà l'eficàcia del biocontrol, però semblà reduir la seva variabilitat.

Robust Control of Systems Subjected to Uncertain Disturbances and Actuator Dynamics

Esta tesis está enfocada al diseño y validación de controladores robustos que pueden reducir de una manera efectiva las vibraciones structurales producidas por perturbaciones externas tales como terremotos, fuertes vientos o cargas pesadas. Los controladores están diseñados basados en teorías de control tradicionalamente usadas en esta area: Teoría de estabilidad de Lyapunov, control en modo deslizante y control clipped-optimal, una técnica reciente mente introducida : Control Backstepping y una que no había sido usada antes: Quantitative Feedback Theory. La principal contribución al usar las anteriores técnicas, es la solución de problemas de control estructural abiertos tales como dinámicas de actuador, perturbaciones desconocidas, parametros inciertos y acoplamientos dinámicos. Se utilizan estructuras típicas para validar numéricamente los controladores propuestos. Especificamente las estructuras son un edificio de base aislada, una plataforma estructural puente-camión y un puente de 2 tramos, cuya configuración de control es tal que uno o mas problemas abiertos están presentes. Se utilizan tres prototipos experimentales para implementar los controladores robustos propuestos, con el fin de validar experimentalmente su efectividad y viabilidad. El principal resultado obtenido con la presente tesis es el diseño e implementación de controladores estructurales robustos que resultan efectivos para resolver problemas abiertos en control estructural tales como dinámicas de actuador, parámetros inciertos, acoplamientos dinámicos, limitación de medidas y perturbaciones desconocidas.

A Study on the Efficiency of Synbiotics for Prevention and Control of Diarrhoea in 21 Dogs Submitted to Radiotherapy

A synbiotic is a formulation containing both probiotics and prebiotics. This study aims to evaluate the effect of supplementation with a synbiotic containing Enterococcus faecium strain E1707 (NCIMB 10415) in preventing or controlling diarrhoea and other gastrointestinal signs in boarded canine radiotherapy patients. A double-blind, randomized, placebocontrolled clinical trial was carried out in 21 adult dogs undergoing radiotherapy and boarded for a duration period of 2 to 3 weeks to treat their cancers. Dogs were randomly divided between two groups: A and B, the synbiotic and placebo group, respectively. The content of the sachets was added to the food once daily. Faecal score was assessed daily, and dogs were also monitored for the development of diarrhoea and other gastrointestinal signs such as weight loss, reduced appetite and vomiting. The results from descriptive statistics seem to favour group B, however these findings were not validated with inferential statistics due to insufficient statistical sample power. Because of this, it is not possible to make conclusions about the benefits of synbiotic as supportive treatment for dogs undergoing radiotherapy. All results should be considered to be preliminary, until they are elucidated by further animal inclusion.