Pastoral-Farmer conflicts over natural resources in the Lake Rukwa basin : Challenges facing policy makers in Tanzania

Despite the important role that pastoralism plays in supporting rural livelihoods, national economy and diverse ecological services, its capacity to adapt to change is facing many challenges including adverse policy, pastoral-farmer conflicts and recently, adverse climate change. The recurring conflicts between the two groupings are rather a result of a reaction by a community which has been marginalized over the years. A survey to analyze conflicts, institutional frameworks, policies, laws and regulations governing NRs utilization by pastoral and farmers was conducted in the Lake Rukwa Basin in 2008. The study noted violent conflicts and their causes, including the scarcity of NRs, poor local institutional frameworks and deeper socio-cultural aspects among pastoralists and farmers. The conflicts have become major impediments to the developmental activities in the study areas, to a degree that requires intervention. This, therefore, calls for reorganization of local institutional framework, policies, laws and regulations and participatory planning and co-management of NRs as part of conflicts management and sustainable utilization of them. Key words: Policies, Natural Resources, Conflicts, Pastoralism, Institutional frameworks

Capacity Building in the Use of Geospatial Tools for Natural Resource Management in Tajikistan: Inception report

The sustainable management of natural resources is a key issue for sustainable development of a poor, mountainous country such as Tajikistan. In order to strengthen its agricultural and infrastructural development efforts and alleviate poverty in rural areas, spatial information and analysis are of crucial importance to improve priority setting and decision making efficiency. However, poor access to geospatial data and tools, and limited capacity in their use has greatly constrained the ability of governmental institutions to effectively assess, plan, and monitor natural resources management. The Centre for Development and Environment (CDE) has thus been mandated by the World Bank Group to provide adequate technical support to the Community Agriculture and Watershed Management Project (CAWMP). This support consists of a spatial database on soil degradation trends in 4 watersheds, capacity development in and awareness creation about geographic information technology and a spatial data exchange hub for natural resources management in Tajikistan. CDE’s support has started in July 2007 and will last until December 2007 with a possible extension in 2008.

Intermediate Kinematics Produce Inferior Feeding Performance in a Classic Case of Natural Hybridization

Selection on naturally occurring hybrid individuals is a key component of speciation theory, but few studies examine the functional basis of hybrid performance. We examine the functional consequences of hybridization in nature, using the freshwater sunfishes (Centrarchidae), where natural hybrids have been studied for more than a century and a half. We examined bluegill (Lepomis macrochirus), green sunfish (Lepomis cyanellus), and their naturally occurring hybrid, using prey-capture kinematics and morphology to parameterize suction-feeding simulations on divergent parental resources. Hybrid individuals exhibited kinematics intermediate between those of the two parental species. However, performance assays indicated that hybrids display performance most similar to the worse-performing species for a given parental resource. Our results show that intermediate hybrid phenotypes can be impaired by a less-than-intermediate performance and hence suffer a larger loss in fitness than could be inferred from morphology alone.

Integration of a World Heritage Site in an agricultural environment in the Simen Mountains (Ethiopia)

The conflict between nature-orientated conservation and man-orientated rural development is examined, along with the degree to which ecological research contributes to mountain development, and whether conservation areas can be protected from being areas of natural resources ultimately to be used by man in life-threatening need. A high mountain national park in Ethiopia is taken as an example within UNESCO's concept of Biosphere Reserves. The main finding is that conservation without development will fail, and therefore the focus is more on the area surrounding a national park than on the park itself. A buffer zone must be developed as an economically stable and socially secure area for man, so that his needs do not drive him to exploit the last natural resource area in his vicinity. Simen is a World Heritage Site for future generations. Man and nature, development and conservation, belong together in this unique mountain area.

Network Dynamics in Natural Resource Governance: A Case Study of Swiss Landscape Management

Structural characteristics of social networks have been recognized as important factors of effective natural resource governance. However, network analyses of natural resource governance most often remain static, even though governance is an inherently dynamic process. In this article, we investigate the evolution of a social network of organizational actors involved in the governance of natural resources in a regional nature park project in Switzerland. We ask how the maturation of a governance network affects bonding social capital and centralization in the network. Applying separable temporal exponential random graph modeling (STERGM), we test two hypotheses based on the risk hypothesis by Berardo and Scholz (2010) in a longitudinal setting. Results show that network dynamics clearly follow the expected trend toward generating bonding social capital but do not imply a shift toward less hierarchical and more decentralized structures over time. We investigate how these structural processes may contribute to network effectiveness over time.

Validation of a Spatially Continuous EDEN Water-Surface Model for the Everglades, Florida

The Everglades Depth Estimation Network (EDEN) is an integrated network of realtime water-level monitoring, ground-elevation modeling, and water-surface modeling that provides scientists and managers with current (2000-present), online water-stage and water-depth information for the entire freshwater portion of the Greater Everglades. Continuous daily spatial interpolations of the EDEN network stage data are presented on grid with 400-square-meter spacing. EDEN offers a consistent and documented dataset that can be used by scientists and managers to: (1) guide large-scale field operations, (2) integrate hydrologic and ecological responses, and (3) support biological and ecological assessments that measure ecosystem responses to the implementation of the Comprehensive Everglades Restoration Plan (CERP) (U.S. Army Corps of Engineers, 1999). The target users are biologists and ecologists examining trophic level responses to hydrodynamic changes in the Everglades. The first objective of this report is to validate the spatially continuous EDEN water-surface model for the Everglades, Florida developed by Pearlstine et al. (2007) by using an independent field-measured data-set. The second objective is to demonstrate two applications of the EDEN water-surface model: to estimate site-specific ground elevation by using the validated EDEN water-surface model and observed water depth data; and to create water-depth hydrographs for tree islands. We found that there are no statistically significant differences between model-predicted and field-observed water-stage data in both southern Water Conservation Area (WCA) 3A and WCA 3B. Tree island elevations were derived by subtracting field water-depth measurements from the predicted EDEN water-surface. Water-depth hydrographs were then computed by subtracting tree island elevations from the EDEN water stage. Overall, the model is reliable by a root mean square error (RMSE) of 3.31 cm. By region, the RMSE is 2.49 cm and 7.77 cm in WCA 3A and 3B, respectively. This new landscape-scale hydrological model has wide applications for ongoing research and management efforts that are vital to restoration of the Florida Everglades. The accurate, high-resolution hydrological data, generated over broad spatial and temporal scales by the EDEN model, provides a previously missing key to understanding the habitat requirements and linkages among native and invasive populations, including fish, wildlife, wading birds, and plants. The EDEN model is a powerful tool that could be adapted for other ecosystem-scale restoration and management programs worldwide.

Contribution of woody habitat islands to the conservation of birds and their potential ecosystem services in an extensive Colombian rangeland

The conservation of birds and their habitats is essential to maintain well-functioning ecosystems including human-dominated habitats. In simplified or homogenized landscapes, patches of natural and semi-natural habitat are essential for the survival of plant and animal populations. We compared species composition and diversity of trees and birds between gallery forests, tree islands and hedges in a Colombian savanna landscape to assess how fragmented woody plant communities affect forest bird communities and how differences in habitat characteristics influenced bird species traits and their potential ecosystem function. Bird and tree diversity was higher in forests than in tree islands and hedges. Soil depth influenced woody species distribution, and canopy cover and tree height determined bird species distribution, resulting in plant and bird communities that mainly differed between forest and non-forest habitat. Bird and tree species and traits widely co-varied. Bird species in tree islands and hedges were on average smaller, less specialized to habitat and more tolerant to disturbance than in forest, but dietary differences did not emerge. Despite being less complex and diverse than forests, hedges and tree islands significantly contribute to the conservation of forest biodiversity in the savanna matrix. Forest fragments remain essential for the conservation of forest specialists, but hedges and tree islands facilitate spillover of more tolerant forest birds and their ecological functions such as seed dispersal from forest to the savanna matrix.

Forestry Sector Reform and Distributional Change of Natural Resource Rent in Indonesia

After the collapse of the centralized Soeharto regime, deforestation caused by over-logging accelerated. To tackle this problem, an IMF/World Bank-led forestry sector reform program adopted a market-friendly approach involving the resumption of round wood exports and raising of the resource rent fee, with the aim to stop rent accumulation by plywood companies, which had enjoyed a supply of round wood at privileged prices. The Indonesian government, for its part, decentralized the forest concession management system to provide incentives for local governments and communities to carry out sustainable forest management. However, neither policy reform worked effectively. The round wood export ban was reimposed and the forest management system centralized again with cooperation from a newly funded industry-led institution. In the midst of the confusion surrounding the policy reversal, the gap between the price of round wood in international and domestic markets failed to contract, although rent allocations to plywood industries were reduced during 1998-2003. The rents were not collected properly by the government, but accumulated unexpectedly in the hands of players in the black market for round wood.

Facing the climate change challenges in the mining and mineral industry as providers of a sustainable manufacturing process

A sustainable manufacturing process must rely on an also sustainable raw materials and energy supply. This paper is intended to show the results of the studies developed on sustainable business models for the minerals industry as a fundamental previous part of a sustainable manufacturing process. As it has happened in other economic activities, the mining and minerals industry has come under tremendous pressure to improve its social, developmental, and environmental performance. Mining, refining, and the use and disposal of minerals have in some instances led to significant local environmental and social damage. Nowadays, like in other parts of the corporate world, companies are more routinely expected to perform to ever higher standards of behavior, going well beyond achieving the best rate of return for shareholders. They are also increasingly being asked to be more transparent and subject to third-party audit or review, especially in environmental aspects. In terms of environment, there are three inter-related areas where innovation and new business models can make the biggest difference: carbon, water and biodiversity. The focus in these three areas is for two reasons. First, the industrial and energetic minerals industry has significant footprints in each of these areas. Second, these three areas are where the potential environmental impacts go beyond local stakeholders and communities, and can even have global impacts, like in the case of carbon. So prioritizing efforts in these areas will ultimately be a strategic differentiator as the industry businesses continues to grow. Over the next forty years, world?s population is predicted to rise from 6.300 million to 9.500 million people. This will mean a huge demand of natural resources. Indeed, consumption rates are such that current demand for raw materials will probably soon exceed the planet?s capacity. As awareness of the actual situation grows, the public is demanding goods and services that are even more environmentally sustainable. This means that massive efforts are required to reduce the amount of materials we use, including freshwater, minerals and oil, biodiversity, and marine resources. It?s clear that business as usual is no longer possible. Today, companies face not only the economic fallout of the financial crisis; they face the substantial challenge of transitioning to a low-carbon economy that is constrained by dwindling natural resources easily accessible. Innovative business models offer pioneering companies an early start toward the future. They can signal to consumers how to make sustainable choices and provide reward for both the consumer and the shareholder. Climate change and carbon remain major risk discontinuities that we need to better understand and deal with. In the absence of a global carbon solution, the principal objective of any individual country should be to reduce its global carbon emissions by encouraging conservation. The mineral industry internal response is to continue to focus on reducing the energy intensity of our existing operations through energy efficiency and the progressive introduction of new technology. Planning of the new projects must ensure that their energy footprint is minimal from the start. These actions will increase the long term resilience of the business to uncertain energy and carbon markets. This focus, combined with a strong demand for skills in this strategic area for the future requires an appropriate change in initial and continuing training of engineers and technicians and their awareness of the issue of eco-design. It will also need the development of measurement tools for consistent comparisons between companies and the assessments integration of the carbon footprint of mining equipments and services in a comprehensive impact study on the sustainable development of the Economy.

Cálculo de la recarga natural en grandes áreas, en función de la litología y la precipitación = Calculation of natural recharge in large areas, as a function of lithology and rainfall

En una región amplia como España se demuestra —mediante inferencias estadísticas sobre una muestra completa de 875 manantiales en los que se conoce su caudal medio y la litología de su área de alimentación y que han sido agrupados en regiones de distinta pluviometría— que la recarga media anual es una fracción fija de la precipitación media para cada litología. Se han establecido así unas tasas de recarga respecto de la precipitación para seis grupos litológicos de diferente permeabilidad: arenas, gravas y formaciones aluviales en general, 8.3%; conglomerados, 5.6%; areniscas, 7.3%; calizas y dolomías, 34.3%; margas, margocalizas, limos y arcillas, 3.3%; otras rocas, 1.3%. Teniendo en cuenta la representatividad de España, la cual tiene una gran variabilidad de litología, pluviometría, topografía, etcétera, estas tasas de recarga respecto de la precipita-ción son probablemente valores cuasi universales que pueden ser utilizados para estimar la recarga media o los recursos hídricos subterráneos medios de regiones amplias en cualquier parte del mundo, salvo en regiones especiales, como las que tienen permafrost, por ejemplo. En todo caso, estas tasas de recarga podrían ser retocadas para cada región según sus particulares características. Los datos de precipitación y litología son muy corrientes, por lo que el método puede ser ampliamente utilizado para completar balances hidráulicos.In a region as large as Spain, annual mean recharge is shown to be a fixed proportion of the mean rainfall for each lithology. This determination is based on statistical inferences from a complete sample of 875 springs for which mean flow and catchment areas are known and which have been grouped into distinct rainfall regions. Recharge rates have thus been established with respect to rainfall for six lithological groups with different permeability: sands, gravels and generally alluvial formations, 8.3%; conglomerates, 5.6%; sandstones, 7.3%; limestone and dolomite 34.3%; marls, marly limestones, silts and clays, 3.3%; and hard rocks, 1.3%. Considering the representativeness of Spain, which is large in size and has a highly varied lithology, topography and rainfall, these recharge rates for rainfall are probably quasi-universal values that can be used to estimate average recharge or average groundwater resources of large regions in any part of the world (except in special cases such as areas with permafrost, for example). For any case, these recharge rates can be adapted to each region according to its particular characteristics. Rainfall and lithology data are very common, and so the method can be widely used to calculate hydraulic balances.

Habitat management for conservation of pollinators in agro-ecosystems of Central Spain

La gestión de hábitat orientada a la conservación de polinizadores en los agro-ecosistemas requiere una selección de especies vegetales atendiendo fundamentalmente a dos criterios: i) el potencial atractivo de sus flores a los polinizadores; y ii) la simplicidad en su manejo agronómico. Además de estas premisas, es necesario considerar la capacidad invasora de estas especies vegetales, debido a que algunas de las más atractivas pueden resultar invasoras en determinados agro-ecosistemas. Por lo tanto, es preciso determinar qué especies vegetales son las más indicadas para ser implementadas en cada agro-ecosistema. En la presente tesis doctoral se plantea la búsqueda de las especies vegetales adecuadas para atraer polinizadores en los agro-ecosistemas del centro de España. En una primera aproximación, se ha evaluado la atracción y expansión espacial (potencial invasivo) de seis plantas perennes de la familia Lamiaceae (aromáticas), elegidas por ser nativas de la región mediterránea. La elección de las especies vegetales se ha llevado a cabo con el fin de crear márgenes funcionales basados en la mezcla de especies vegetales con distintos periodos de floración, de modo que prolonguen la disponibilidad de recursos florales en el tiempo. Tras un primer año dedicado al establecimiento de las especies aromáticas, en los dos años siguientes se ha estudiado la atracción individual y combinada de las especies vegetales sobre los polinizadores, y como ésta se ve afectada por la densidad y la morfología floral, utilizando para ello un diseño experimental en bloques al azar. Los resultados de este estudio han puesto de manifiesto que la morfología floral no tuvo influencia sobre la atracción de las especies vegetales, pero si la densidad floral, puesto que las especies vegetales con mayor densidad de flores (Nepeta tuberosa e Hyssopus officinalis) han mostrado mayor atracción a polinizadores. Cabe destacar que de las seis especies consideradas, dos especies de verano (Melissa officinalis y Thymbra capitata) no han contribuido de forma efectiva a la atracción de la mezcla hacia los polinizadores, mostrando una reducción significativa de este parámetro respecto a las otras especies aromáticas a lo largo del verano. Se ha observado que ninguna de las especies aromáticas evaluadas ha mostrado tendencia invasora a lo largo del estudio. En base a estos resultados, se puede concluir que entre las especies aromáticas estudiadas, N. tuberosa, H. officinalis y Salvia verbenaca son las que ofrecen mayor potencial para ser utilizadas en la conservación de polinizadores. De forma similar al caso de las plantas aromáticas, se ha llevado a cabo una segunda experimentación que incluía doce plantas anuales con floración de primavera, en la que se evaluó la atracción a polinizadores y su comportamiento agronómico. Este estudio con especies herbáceas se ha prolongado durante dos años, utilizando un diseño experimental de bloques aleatorios. Las variables analizadas fueron: el atractivo de las distintas especies vegetales a los polinizadores, su eficiencia de atracción (calculada como una combinación de la duración de la floración y las visitas de insectos), su respuesta a dos tipos de manejo agronómico (cultivo en mezcla frente a monocultivo; laboreo frente a no-laboreo) y su potencial invasivo. Los resultados de esta segunda experimentación han mostrado que las flores de Borago officinalis, Echium plantagineum, Phacelia tanacetifolia y Diplotaxis tenuifolia son atractivas a las abejas, mientras que las flores de Calendula arvensis, Coriandrum sativum, D. tenuifolia y Lobularia maritima son atractivas a los sírfidos. Con independencia del tipo de polinizadores atraídos por cada especie vegetal, se ha observado una mayor eficiencia de atracción en parcelas con monocultivo de D. tenuifolia respecto a las parcelas donde se cultivó una mezcla de especies herbáceas, si bien en estas últimas se observó mayor eficiencia de atracción que en la mayoría de parcelas mono-específicas. Respecto al potencial invasivo de las especies herbáceas, a pesar de que algunas de las más atractivas a polinizadores (P. tanacetifolia and C. arvensis) mostraron tendencia a un comportamiento invasor, su capacidad de auto-reproducción se vio reducida con el laboreo. En resumen, D. tenuifolia es la única especie que presentó una alta eficiencia de atracción a distintos tipos de polinizadores, conjuntamente con una alta capacidad de auto-reproducción pero sin mostrar carácter invasor. Comparando el atractivo de las especies vegetales utilizadas en este estudio sobre los polinizadores, D. tenuifolia es la especie más recomendable para su cultivo orientado a la atracción de polinizadores en agro-ecosistemas en el centro de España. Esta especie herbácea, conocida como rúcula, tiene la ventaja añadida de ser una especie comercializada para el consumo humano. Además de su atractivo a polinizadores, deben considerarse otros aspectos relacionados con la fisiología y el comportamiento de esta especie vegetal en los agro-ecosistemas antes de recomendar su cultivo. Dado que el cultivo en un campo agrícola de una nueva especie vegetal implica unos costes de producción, por ejemplo debidos a la utilización de agua de riego, es necesario evaluar el incremento en dichos costes en función de demanda hídrica específica de esa especie vegetal. Esta variable es especialmente importante en zonas dónde se presentan sequías recurrentes como es el caso del centro y sur-este de la península Ibérica. Este razonamiento ha motivado un estudio sobre los efectos del estrés hídrico por sequía y el estrés por déficit moderado y severo de riego sobre el crecimiento y floración de la especie D. tenuifolia, así como sobre la atracción a polinizadores. Los resultados muestran que tanto el crecimiento y floración de D. tenuifolia como su atracción a polinizadores no se ven afectados si la falta de riego se produce durante un máximo de 4 días. Sin embargo, si la falta de riego se extiende a lo largo de 8 días o más, se observa una reducción significativa en el crecimiento vegetativo, el número de flores abiertas, el área total y el diámetro de dichas flores, así como en el diámetro y longitud del tubo de la corola. Por otro lado, el estudio pone de manifiesto que un déficit hídrico regulado permite una gestión eficiente del agua, la cual, dependiendo del objetivo final del cultivo de D. tenuifolia (para consumo o solo para atracción de polinizadores), puede reducir su consumo entre un 40 y un 70% sin afectar al crecimiento vegetativo y desarrollo floral, y sin reducir significativamente el atractivo a los polinizadores. Finalmente, esta tesis aborda un estudio para determinar cómo afecta el manejo de hábitat a la producción de los cultivos. En concreto, se ha planteado una experimentación que incluye márgenes mono-específicos y márgenes con una mezcla de especies atractivas a polinizadores, con el fin de determinar su efecto sobre la producción del cultivo de cilantro (C. sativum). La elección del cultivo de cilantro se debe a que requiere la polinización de insectos para su reproducción (aunque, en menor medida, puede polinizarse también por el viento), además de la facilidad para estimar su producción en condiciones semi-controladas de campo. El diseño experimental consistía en la siembra de márgenes mono-específicos de D. tenuifolia y márgenes con mezcla de seis especies anuales situados junto al cultivo de cilantro. Estos cultivos con márgenes florales fueron comparados con controles sin margen floral. Además, un segundo grupo de plantas de cilantro situadas junto a todos los tratamientos, cuyas flores fueron cubiertas para evitar su polinización, sirvió como control para evaluar la influencia de los polinizadores en la producción del cultivo. Los resultados muestran que la presencia de cualquiera de los dos tipos de margen floral mejora el peso y el porcentaje de germinación de las semillas de cilantro frente al control sin margen. Si se comparan los dos tipos de margen, se ha observado un mayor número de semillas de cilantro junto al margen con mezcla de especies florales respecto al margen mono-específico, probablemente debido al mayor número visitas de polinizadores. Puesto que el experimento se realizó en condiciones de campo semi-controladas, esto sugiere que las visitas de polinizadores fueron el factor determinante en los resultados. Por otro lado, los resultados apuntan a que la presencia de un margen floral (ya sea mono-especifico o de mezcla) en cultivos de pequeña escala puede aumentar la producción de cilantro en más de un 200%, al tiempo que contribuyen a la conservación de los polinizadores. ABSTRACT Habitat management, aimed to conserve pollinators in agro-ecosystems, requires selection of the most suitable plant species in terms of their attractiveness to pollinators and simplicity of agronomic management. However, since all flowers are not equally attractive to pollinators and many plant species can be weedy or invasive in the particular habitat, it is important to test which plant species are the most appropriate to be implemented in specific agro-ecosystems. For that reason, this PhD dissertation has been focused on determination of the most appropriate aromatic and herbaceous plants for conservation of pollinators in agro-ecosystems of Central Spain. Therefore, in a first approximation, spatial expansion (i.e. potential weediness) and attractiveness to pollinators of six aromatic perennial plants from the Lamiaceae family, native and frequent in the Mediterranean region, were evaluated. Preliminary plant selection was based on designing a functional mixed margins consisting of plants attractive to pollinators and with different blooming periods, in order to extend the availability of floral resources in the field. After a year of vegetative growth, the next two years the plant species were studied in a randomized block design experiment in order to estimate their attractiveness to pollinators in Central Spain and to investigate whether floral morphology and density affect attractiveness to pollinators. The final aim of the study was to evaluate how their phenology and attractiveness to pollinators can affect the functionality of a flowering mixture of these plants. In addition, the spatial expansion, i.e. potential weediness, of the selected plant species was estimated under field conditions, as the final purpose of the studied plants is to be implemented within agro-ecosystems. The results of the experiment showed that floral morphology did not affect the attractiveness of plants to pollinators, but floral density did, as plant species with higher floral density (i.e. Nepeta tuberosa and Hyssopus officinalis) showed significantly higher attractiveness to pollinators. In addition, of six plant species, two summer species (Melissa officinalis and Thymbra capitata) did not efficiently contribute to the attractiveness of the mixture to pollinators, which reduced its attractiveness during the summer period. Finally, as none of the plants showed weedy behaviour under field conditions, the attractive plant species, i.e. N. tuberosa, H. officinalis and the early spring flowering Salvia verbenaca, showed good potential to conserve the pollinators. Similarly, in a second approximation, the attractiveness to pollinators and agronomic behaviour of twelve herbaceous plants blooming in spring were studied. This experiment was conducted over two years in a randomized block design in order to evaluate attractiveness of preselected plant species to pollinators, as well as their attractiveness efficiency (a combination of duration of flowering and insect visitation), their response to two different agronomic management practices (growing in mixed vs. mono-specific plots; tillage vs. no-tillage), and their potential weediness. The results of this experiment showed that the flowers of Borago officinalis, Echium plantagineum, Phacelia tanacetifolia and Diplotaxis tenuifolia were attractive to bees, while Calendula arvensis, Coriandrum sativum, D. tenuifolia and Lobularia maritima were attractive to hoverflies. In addition, floral mixture resulted in lower attractiveness efficiency to pollinators than mono-specific D. tenuifolia, but higher than most of the mono-specific stands. On the other hand, although some of the most attractive plant species (e.g. P. tanacetifolia and C. arvensis) showed potential weediness, their self-seeding was reduced by tillage. After comparing attractiveness efficiency of various herbaceous species to pollinators and their potential weediness, the results indicated that D. tenuifolia showed the highest attractiveness efficiency to pollinators and efficient self-reproduction, making it highly recommended to attract bees and hoverflies in agro-ecosystems of Central Spain. In addition, this plant, commonly known as wild rocket, has a supplementary economic value as a commercialized crop. The implementation of a new floral margin in agro-ecosystems means increased production costs, especially in regions with frequent and long droughts (as it is Central and South-East area of Iberian Peninsula), where the principal agricultural cost is irrigation. Therefore, before recommending D. tenuifolia for sustainable habitat management within agro-ecosystems, it is necessary to study the effect of drought stress and moderate and severe deficit irrigation on its growth, flower development and attractiveness to pollinators. The results of this experiment showed that in greenhouse conditions, potted D. tenuifolia could be without irrigation for 4 days without affecting its growth, flowering and attractiveness to pollinators. However, lack of irrigation for 8 days or longer significantly reduced the vegetative growth, number of open flowers, total floral area, flower diameter, corolla tube diameter and corolla tube length of D. tenuifolia. This study showed that regulated deficit irrigation can improve water use efficiency, and depending on the purpose of growing D. tenuifolia, as a crop or as a beneficial plant to attract pollinators, it can reduce water consumption by 40% to 70% without affecting its vegetative and floral development and without reducing its attractiveness to pollinators. Finally, the following experiment was developed in order to understand how habitat management can influence on the agricultural production. For this purpose, it was evaluated if the vicinity of mixed and mono-specific field margins, preselected to conserve pollinators within agro-ecosystems, can improve seed production in coriander (C. sativum). The selection of this plant species for the experiment was based on its necessity for insect pollination for production of seeds (even though some pollen can be transmitted from one flower to another by wind) and the fact that under semi-controlled field conditions established in the field it is possible to estimate its total seed production. Since D. tenuifolia is attractive for both bees and hoverflies in Central Spain, the main objective of this experiment was to estimate the impact of two different types of field margins, i.e. mono-specific margin with D. tenuifolia and mixed margin with six herbaceous species, on the seed production of potted coriander. For that reason, it was tested: i) if open pollination (control without proximate field margin and treatments with nearby mono-specific and mixed margin) increases the seed production of coriander when compared with no-pollination (covered inflorescences of coriander) under field conditions; ii) if frequency of pollinator visitation to the flowers of coriander was higher in the presence of field margins than in the control without field margin; and iii) if seed production was higher in the presence of field margins than in control plants of coriander without field margin. The results showed that the proximity of both types of floral margins (mixed and mono-specific) improved the seed quality of coriander plants, as seed weight and germination rate were higher than in control plants without field margin. Furthermore, the number of seeds produced was significantly higher in coriander plants grown near mixed margins than near mono-specific margin, probably due to an increase in pollinator visits. Since the experiment was conducted under semi-controlled field conditions, it can be concluded that pollinator visits was the main factor that biased the results, and that presence of both mixed or mono-specific (D. tenuifolia) margins can improve the production of coriander for more than 200% in small-scale gardens and, in addition, conserve the local pollinators.

Conservation of Computational Scientific Execution Environments for Workflow-based Experiments Using Ontologies

La reproducibilidad de estudios y resultados científicos es una meta a tener en cuenta por cualquier científico a la hora de publicar el producto de una investigación. El auge de la ciencia computacional, como una forma de llevar a cabo estudios empíricos haciendo uso de modelos matemáticos y simulaciones, ha derivado en una serie de nuevos retos con respecto a la reproducibilidad de dichos experimentos. La adopción de los flujos de trabajo como método para especificar el procedimiento científico de estos experimentos, así como las iniciativas orientadas a la conservación de los datos experimentales desarrolladas en las últimas décadas, han solucionado parcialmente este problema. Sin embargo, para afrontarlo de forma completa, la conservación y reproducibilidad del equipamiento computacional asociado a los flujos de trabajo científicos deben ser tenidas en cuenta. La amplia gama de recursos hardware y software necesarios para ejecutar un flujo de trabajo científico hace que sea necesario aportar una descripción completa detallando que recursos son necesarios y como estos deben de ser configurados. En esta tesis abordamos la reproducibilidad de los entornos de ejecución para flujos de trabajo científicos, mediante su documentación usando un modelo formal que puede ser usado para obtener un entorno equivalente. Para ello, se ha propuesto un conjunto de modelos para representar y relacionar los conceptos relevantes de dichos entornos, así como un conjunto de herramientas que hacen uso de dichos módulos para generar una descripción de la infraestructura, y un algoritmo capaz de generar una nueva especificación de entorno de ejecución a partir de dicha descripción, la cual puede ser usada para recrearlo usando técnicas de virtualización. Estas contribuciones han sido aplicadas a un conjunto representativo de experimentos científicos pertenecientes a diferentes dominios de la ciencia, exponiendo cada uno de ellos diferentes requisitos hardware y software. Los resultados obtenidos muestran la viabilidad de propuesta desarrollada, reproduciendo de forma satisfactoria los experimentos estudiados en diferentes entornos de virtualización. ABSTRACT Reproducibility of scientific studies and results is a goal that every scientist must pursuit when announcing research outcomes. The rise of computational science, as a way of conducting empirical studies by using mathematical models and simulations, have opened a new range of challenges in this context. The adoption of workflows as a way of detailing the scientific procedure of these experiments, along with the experimental data conservation initiatives that have been undertaken during last decades, have partially eased this problem. However, in order to fully address it, the conservation and reproducibility of the computational equipment related to them must be also considered. The wide range of software and hardware resources required to execute a scientific workflow implies that a comprehensive description detailing what those resources are and how they are arranged is necessary. In this thesis we address the issue of reproducibility of execution environments for scientific workflows, by documenting them in a formalized way, which can be later used to obtain and equivalent one. In order to do so, we propose a set of semantic models for representing and relating the relevant information of those environments, as well as a set of tools that uses these models for generating a description of the infrastructure, and an algorithmic process that consumes these descriptions for deriving a new execution environment specification, which can be enacted into a new equivalent one using virtualization solutions. We apply these three contributions to a set of representative scientific experiments, belonging to different scientific domains, and exposing different software and hardware requirements. The obtained results prove the feasibility of the proposed approach, by successfully reproducing the target experiments under different virtualization environments.

Recommendations for Soil and Water Conservation Programs

The United States Department of Agriculture employs soil and water conservation programs to assist with the sustainable use of natural resources in balance with economic vitality in rural America. This capstone project analyzed soil and water conservation programs to identify strengths, weaknesses, and methods to maximize environmental benefits. There are many requirements for participation in these programs which are difficult for most agricultural producers to comprehend. Research indicates in order to accomplish the goals of federal conservation programs and assist individuals, a method must be developed to effectively present information in a concise manner. This capstone project created a communicative measure, a template, to disseminate pertinent knowledge on soil and water conservation programs, thereby filling a void in existing literature.