Towards Machine Consciousness: Grounding Abstract Models as pi-Processes

We present a two-level model of concurrent communicating systems (CCS) to serve as a basis formachine consciousness. A language implementing threads within logic programming is ¯rstintroduced. This high-level framework allows for the de¯nition of abstract processes that can beexecuted on a virtual machine. We then look for a possible grounding of these processes into thebrain. Towards this end, we map abstract de¯nitions (including logical expressions representingcompiled knowledge) into a variant of the pi-calculus. We illustrate this approach through aseries of examples extending from a purely reactive behavior to patterns of consciousness.

Behavioral changes in brain-injured critical care adults with different levels of consciousness during nociceptive stimulation: an observational study.

PURPOSE: The primary objective of this study was to describe the frequency of behaviors observed during rest, a non-nociceptive procedure, and a nociceptive procedure in brain-injured intensive care unit (ICU) patients with different levels of consciousness (LOC). Second, it examined the inter-rater reliability and discriminant and concurrent validity of the behavioral checklist used. METHODS: The non-nociceptive procedure involved calling the patient and shaking his/her shoulder. The nociceptive procedure involved turning the patient. The frequency of behaviors was recorded using a behavioral checklist. RESULTS: Patients with absence of movement, or stereotyped flexion or extension responses to a nociceptive stimulus displayed more behaviors during turning (median 5.5, range 0-14) than patients with localized responses (median 4, range 0-10) or able to self-report their pain (median 4, range 0-10). Face flushing, clenched teeth, clenched fist, and tremor were more frequent in patients with absence of movement, or stereotyped responses to a nociceptive stimulus. The reliability of the checklist was supported by a high intra-class correlation coefficient (0.77-0.92), and the internal consistency was acceptable in all three groups (KR 20, 0.71-0.85). Discriminant validity was supported as significantly more behaviors were observed during nociceptive stimulation than at rest. Concurrent validity was confirmed as checklist scores were correlated to the patients' self-reports of pain (r s = 0.53; 95 % CI 0.21-0.75). CONCLUSION: Brain-injured patients reacted significantly more during a nociceptive stimulus and the number of observed behaviors was higher in patients with a stereotyped response.

Sähkökaupan riskit ja riskienhallinta

Diplomityön tavoitteena on luoda kokonaisvaltainen kuva sähkökaupassa esiintyvistä riskeistä ja niiden analysointi- sekä hallintamenetelmistä. Toinen päätavoitteista on lisätä ymmärrystä markkinoiden erikoispiirteistä, kuten siirtokapasiteettirajoituksista, kysynnän hintajouston puutteesta ja markkinoiden keskittyneisyydestä, sekä arvioida niiden merkitystä sähkökaupan riskienhallinnan näkökulmasta. Markkinoiden erikoispiirteet ja sähkön tuotantoon ja kulutukseen vaikuttavat fundamentaaliset tekijät aiheuttavat suuria muutoksia pörssisähkön hintatasossa. Sähkön volatiliteetti yhdessä useiden muiden riskitekijöiden kanssa aiheuttaa sähkökaupantoimijoille todellisen tarpeen riskienhallinnalle. Sähkökauppa tarjoaa haasteellisen toimintaympäristön riskienhallinnan näkökulmasta. Sähkökaupassa esiintyvien riskien täydellinen hallitseminen on miltei mahdoton tehtävä, mutta sähkökaupan toimintaympäristön tunteminen ja järjestelmällisesti toteutettu riskienhallinta luovat hyvät edellytykset menestyksekkäälle toiminnalle sähkökaupassa. Diplomityössä käsitellään sähkökaupassa esiintyviä riskejä ja niidensyntyyn vaikuttavia tekijöitä. Näiden asioiden ymmärtäminen luo pohjan sähkökaupan onnistuneelle riskienhallinnalle. Työssä käydään myös läpi yleisimmät sähkökaupassa käytetyt riskianalyysin menetelmät. Diplomityössä esitellään sähköpörssin tarjoamat johdannaistuotteet ja havainnollistetaan niiden käyttöä osana sähkökaupan riskienhallintaa. Työn lopussa käsitellään profiiliriskin muodostumista jasen vaikutuksia sähkön hankintakustannuksiin.

Need for informed consent in substance use studies--harm of bias?

OBJECTIVE: The aim of this study was to examine the differences between those who gave informed consent to a study on substance use and those who did not, and to analyze whether differences changed with varying nonconsent rates. METHOD: Cross-sectional questionnaire data on demographics, alcohol, smoking, and cannabis use were obtained for 6,099 French- and 5,720 German-speaking 20-year-old Swiss men. Enrollment took place over 11 months for the Cohort Study on Substance Use Risk Factors (C-SURF). Consenters and nonconsenters were asked to complete a short questionnaire. Data for nearly the entire population were available because 94% responded. Weekly differences in consent rates were analyzed. Regressions examined the associations of substance use with consent giving and consent rates and the interaction between the two. RESULTS: Nonconsenters had higher substance use patterns, although they were more often alcohol abstainers; differences were small and not always significant and did not decrease as consent rates increased. CONCLUSIONS: Substance use currently is a minor sensitive topic among young men, resulting in small differences between nonconsenters and consenters. As consent rates increase, additional individuals are similar to those observed at lower consent rates. Estimates of analytical studies looking at associations of substance use with other variables will not differ at reasonable consent rates of 50%-80%. Descriptive prevalence studies may be biased, but only at very low rates of consent.

Ohutlevytuotteenvalmistusteknisten piirteiden tunnistaminen ja käyttö suunnittelun apuna

Suunnittelu- ja valmistustoiminnot ovat eriytymässä myös ohutlevyteollisuudessa. Kilpailukyvyn parantamiseksi, valmistusta siirretään alihankkijoille maihin, jossa työvoima on halpaa ja suuret markkinat lähellä, tuotekehityksen ja suunnittelun jäädessä Suomeen tai muualle Länsi-Eurooppaan. Tällöin vanhan lokaalin toimintamallin synergiaedut eivät ole enää mahdollisia ja tuotteen valmistettavuuden arviointi, laadunhallinta ja komponenttien yhteensopivuuden varmistaminen on erittäin haasteellista. Tässä tutkimuksessa etsittiin uuden toimintamallin tuomiin haasteisiin vastauksia piirrepohjaisesta mallintamisesta. Tavoitteen mukaisesti, tutkimuksessa tunnistettiin ohutlevytuotteen valmistusteknilliset piirteet ja luotiin niiden mukainen piirrekaavio. Piirteiden tunnistus vaati tutkimustyötä sekä nykyaikaisten suunnittelumetodien että valmistusmenetelmien ja ohutlevymateriaalien parissa. Lisäksitarkasteltiin, millaisia vaikutuksia piirteillä on tuotteen valmistettavuuteen ja miten nämä tulee huomioida tuotteen suunnittelussa.

The French adaptation of the Health of the Nation Outcome Scale for Children and Adolescents Self-Rated Form (F-HoNOSCA-SR): Validation and clinical routine use.

The current study aimed to explore the validity of an adaptation into French of the self-rated form of the Health of the Nation Outcome Scales for Children and Adolescents (F-HoNOSCA-SR) and to test its usefulness in a clinical routine use. One hundred and twenty nine patients, admitted into two inpatient units, were asked to participate in the study. One hundred and seven patients filled out the F-HoNOSCA-SR (for a subsample (N=17): at two occasions, one week apart) and the strengths and difficulties questionnaire (SDQ). In addition, the clinician rated the clinician-rated form of the HoNOSCA (HoNOSCA-CR, N=82). The reliability (assessed with split-half coefficient, item response theory (IRT) models and intraclass correlations (ICC) between the two occasions) revealed that the F-HoNSOCA-SR provides reliable measures. The concurrent validity assessed by correlating the F-HoNOSCA-SR and the SDQ revealed a good convergent validity of the instrument. The relationship analyses between the F-HoNOSCA-SR and the HoNOSCA-CR revealed weak but significant correlations. The comparison between the F-HoNOSCA-SR and the HoNOSCA-CR with paired sample t-tests revealed a higher score for the self-rated version. The F-HoNSOCA-SR was reported to provide reliable measures. In addition, it allows us to measure complementary information when used together with the HoNOSCA-CR.

Esituotannon aikainen konseptien verifiointi muovituotteen valmistusessa

 Diplomityön tavoitteena on tutkia ja kehittää muovituotteen valmistuskonseptien verifiointimenetelmiä ja luoda malli, jolla saadaan esituotantovaiheestalähtien parannettu tuotantoprosessi massatuotannon aloittamiseen (ramp up). Työn tavoitteena on myös toimia viestintäkeinona lisäämässä organisaation tietoisuutta esituotantovaiheen tärkeydestä. Työ pohjautuu tekijän aikaisempaan tutkimukseen "esituotantoprosessista oppimisen vaikutukset massatuotannon aloitukseen", joka on tehty erikoistyönä v.2006. Tutkimus menetelminä on käytetty pääasiassa prosessien kuvaamista, benchmarkingia, asiantuntijoiden haastatteluja sekä analysoitu toteutuneita projekteja. Lopputuloksena on saatu toimintamalli, joka vastaa hyvin pitkälle prosessien kuvausten aikana syntynyttä mallia. Keskeisenä ajatuksena on valmistuskonseptin verifioinnin kytkeminen tuotteen mekaniikkasuunnittelun kypsyyteen. Koko projektia koskevien tavoitteiden määrittäminen johdetaan ramp up tavoitteista. Verifioitavaksi valitaan kriittisin tuote ja prosessi. Tähän on teoreettisena viitekehyksenä käytetty Quality Function Deployment (QFD) menetelmää. Jatkotoimenpiteiksi esitetään ramp up tavoitteiden ja mittareiden kehittämistä, joilla pystytään seuraamaan ja ohjaamaan projektia jo heti alusta alkaen. Lisätutkimusta tarvitaan myös esituotannon aikaisten prosessiparametrien suunnitteluun ja optimointiin.

Low current and nadir CD4+ T-cell counts are associated with higher hepatitis C virus RNA levels in the Swiss HIV cohort study.

BACKGROUND: The aim of this study was to evaluate the effect of CD4+ T-cell counts and other characteristics of HIV-infected individuals on hepatitis C virus (HCV) RNA levels. METHODS: All HIV-HCV-coinfected Swiss HIV Cohort Study participants with available HCV RNA levels and concurrent CD4+ T-cell counts before starting HCV therapy were included. Potential predictors of HCV RNA levels were assessed by multivariate censored linear regression models that adjust for censored values. RESULTS: The study included 1,031 individuals. Low current and nadir CD4+ T-cell counts were significantly associated with higher HCV RNA levels (P = 0.004 and 0.001, respectively). In individuals with current CD4+ T-cell counts < 200/microl, median HCV RNA levels (6.22 log10 IU/ml) were +0.14 and +0.24 log10 IU/ml higher than those with CD4+ T-cell counts of 200-500/microl and > 500/microl. Based on nadir CD4+ T-cell counts, median HCV RNA levels (6.12 log10 IU/ml) in individuals with < 200/microl CD4+ T-cells were +0.06 and +0.44 log10 IU/ml higher than those with nadir T-cell counts of 200-500/microl and > 500/microl. Median HCV RNA levels were also significantly associated with HCV genotype: lower values were associated with genotype 4 and higher values with genotype 2, as compared with genotype 1. Additional significant predictors of lower HCV RNA levels were female gender and HIV transmission through male homosexual contacts. In multivariate analyses, only CD4+ T-cell counts and HCV genotype remained significant predictors of HCV RNA levels. Conclusions: Higher HCV RNA levels were associated with CD4+ T-cell depletion. This finding is in line with the crucial role of CD4+ T-cells in the control of HCV infection.

Suurien tahtimoottorien tilaustoimitusprosessin kehittäminen

Työn tavoitteena on ideoida keinoja, joilla tehottomasti toimivaa tilaustoimitusprosessia voidaan kehittää. Ideoidut kehittämistoimet pohjautuvat tilaustoimitusprosessin toimivuutta selvittävään tutkimukseen ja niillä tavoitellaan kohdeyrityksessä valmistettavien suurien tahtikoneiden tilaustoimitusprosessin korkeampaa tuottavuutta ja laaduntuottokykyä, lyhyempiä läpäisyaikoja sekä pienempää keskeneräisen tuotannon määrää. Työssä keskitytään kehittämään tilaustoimitusprosessin alkupään vaiheiden eli tilauskohtaisen suunnittelun ja projektinhoidon epästandardeja toimintatapoja sekä puutteellisia työvälineitä. Työn tutkimusvaiheessa selvitetään tilaustoimitusprosessinnykytila prosessiin osallistuvia henkilöitä haastattelemalla, tutkimalla toteutuneita toimitusaika- ja nimikerakenteita sekä esiintyneitä laatupoikkeamia. Näin pyritään löytämään nykyisen toimintamallin ongelmakohdat, joihin kehittämisen painopistealue asetetaan. Tutkimusvaiheeseen kuuluu myös kirjallisuustutkimus, jossa paneudutaan tilaustoimitusprosessin toimintaan yleisellä tasolla sekä kartoitetaan niitä tekijöitä, jotka vaikuttavat tilaustoimitusprosessin tehokkuuteen. Lisäksi kirjallisuustutkimuksessa perehdytään yksittäistuotantoon liittyvään teoriaan ja erilaisiin tapoihin organisoida sen toimintaa. Tutkimusvaiheen jälkeen esitellään tutkimukseen pohjautuvat toimenpide-ehdotukset kohdeyrityksen tilaustoimitusprosessin tehokkuuden parantamiseksi.Ehdotettuja toimintaa tehostavia keinoja ovat simultaanisuunnittelu, erilaistensuunnittelun ja tuotannon yhteistyötä tukevien tietojärjestelmien rakentaminen,DFMA-analyysin käyttöönotto, tuotteiden rakenteiden tehokas modulointi sekä mallirakenne yrityksen heikoimmin vakioidulle tuotteelle. Ennen kehitystoimien aloittamista yrityksen toimistoprosessin toimivuutta ehdotetaan lisäksi tarkasteltavan työntutkimuksen keinoin.

High-performance payload data handling system for Gaia

Gaia is the most ambitious space astrometry mission currently envisaged and is a technological challenge in all its aspects. We describe a proposal for the payload data handling system of Gaia, as an example of a high-performance, real-time, concurrent, and pipelined data system. This proposal includes the front-end systems for the instrumentation, the data acquisition and management modules, the star data processing modules, and the payload data handling unit. We also review other payload and service module elements and we illustrate a data flux proposal.

Validation of the spiritual distress assessment tool in older hospitalized patients.

ABSTRACT:¦BACKGROUND: The Spiritual Distress Assessment Tool (SDAT) is a 5-item instrument developed to assess unmet spiritual needs in hospitalized elderly patients and to determine the presence of spiritual distress. The objective of this study was to investigate the SDAT psychometric properties.¦METHODS: This cross-sectional study was performed in a Geriatric Rehabilitation Unit. Patients (N = 203), aged 65 years and over with Mini Mental State Exam score ≥ 20, were consecutively enrolled over a 6-month period. Data on health, functional, cognitive, affective and spiritual status were collected upon admission. Interviews using the SDAT (score from 0 to 15, higher scores indicating higher distress) were conducted by a trained chaplain. Factor analysis, measures of internal consistency (inter-item and item-to-total correlations, Cronbach α), and reliability (intra-rater and inter-rater) were performed. Criterion-related validity was assessed using the Functional Assessment of Chronic Illness Therapy-Spiritual well-being (FACIT-Sp) and the question "Are you at peace?" as criterion-standard. Concurrent and predictive validity were assessed using the Geriatric Depression Scale (GDS), occurrence of a family meeting, hospital length of stay (LOS) and destination at discharge.¦RESULTS: SDAT scores ranged from 1 to 11 (mean 5.6 ± 2.4). Overall, 65.0% (132/203) of the patients reported some spiritual distress on SDAT total score and 22.2% (45/203) reported at least one severe unmet spiritual need. A two-factor solution explained 60% of the variance. Inter-item correlations ranged from 0.11 to 0.41 (eight out of ten with P < 0.05). Item-to-total correlations ranged from 0.57 to 0.66 (all P < 0.001). Cronbach α was acceptable (0.60). Intra-rater and inter-rater reliabilities were high (Intraclass Correlation Coefficients ranging from 0.87 to 0.96). SDAT correlated significantly with the FACIT-Sp, "Are you at peace?", GDS (Rho -0.45, -0.33, and 0.43, respectively, all P < .001), and LOS (Rho 0.15, P = .03). Compared with patients showing no severely unmet spiritual need, patients with at least one severe unmet spiritual need had higher odds of occurrence of a family meeting (adjOR 4.7, 95%CI 1.4-16.3, P = .02) and were more often discharged to a nursing home (13.3% vs 3.8%; P = .027).¦CONCLUSIONS: SDAT has acceptable psychometrics properties and appears to be a valid and reliable instrument to assess spiritual distress in elderly hospitalized patients.

Working memory load improves early stages of independent visual processing.

Increasing evidence suggests that working memory and perceptual processes are dynamically interrelated due to modulating activity in overlapping brain networks. However, the direct influence of working memory on the spatio-temporal brain dynamics of behaviorally relevant intervening information remains unclear. To investigate this issue, subjects performed a visual proximity grid perception task under three different visual-spatial working memory (VSWM) load conditions. VSWM load was manipulated by asking subjects to memorize the spatial locations of 6 or 3 disks. The grid was always presented between the encoding and recognition of the disk pattern. As a baseline condition, grid stimuli were presented without a VSWM context. VSWM load altered both perceptual performance and neural networks active during intervening grid encoding. Participants performed faster and more accurately on a challenging perceptual task under high VSWM load as compared to the low load and the baseline condition. Visual evoked potential (VEP) analyses identified changes in the configuration of the underlying sources in one particular period occurring 160-190 ms post-stimulus onset. Source analyses further showed an occipito-parietal down-regulation concurrent to the increased involvement of temporal and frontal resources in the high VSWM context. Together, these data suggest that cognitive control mechanisms supporting working memory may selectively enhance concurrent visual processing related to an independent goal. More broadly, our findings are in line with theoretical models implicating the engagement of frontal regions in synchronizing and optimizing mnemonic and perceptual resources towards multiple goals.

Étude et implémentation d'un modèle de conscience d'agent

La thèse essaie de montrer comment il est possible d'offrir une implémentation fonctionnelle d'un agent doté d'une conscience (psychologique). Une première étape étudie les différentes approches, définitions et théories de la conscience proposées par la littérature. Cette étude dégage plus particulièrement un modèle psychologique qui offre une modélisation des fonctionnalités de la conscience, de ses éléments constitutifs et des relations entre ces éléments. Cet effort de formalisation permet d'identifier les corrélations computionnelles du modèle ouvrant ainsi la voie à une implémentation fonctionnelle de la conscience. Une seconde étape réuni les outils et méthodes informatiques existants en vue de procéder à une telle implémentation. En particulier, celle-ci repose sur un modèle de communication permettant d'élaborer une machine virtuelle basée sur des processus concurrents synchronisés. La troisième étape consiste à implémenter les corrélations computationnelles dont l'une est une fonction de délibération qui, après une analyse itérative de son état et de son environnement (machine à état), aboutit à la sélection d'une action. Une deuxième fonction est la formation de contextes, autrement dit l'apprentissage d'automatismes, consistant à compiler la délibération. Cette compilation s'opère grâce à un processus concurrent reflétant le processus de délibération, dotant ainsi l'agent de la capacité d'observer son propre fonctionnement. La thèse se conclut en proposant quelques axes de recherches et d'applications futures susceptibles de prolonger le travail.

Implantació del sistema Sauron per a la gestió del sistema DNS de la UdL

El sistema de noms de domini (DNS) proveeix d'un sistema distribuït per a la resolució de noms

Product Platform Development from the Product Lines' Perspective: Case of Switching Platform

In the era of fast product development and customized product requirements, the concept of product platform has proven its power in practice. The product platform approach has enabledcompanies to increase the speed of product introductions while simultaneously benefit from efficiency and effectiveness in the development and production activities. The product platforms are technological bases, which can be used to develop several derivative products, and hence, the differentiation can be pushed closer to the product introduction. The product platform development has some specific features, which differ somewhat from the product development of single products. The time horizon is longer, since the product platform¿slife cycle is longer than individual product's. The long time-horizon also proposes higher market risks and the use of new technologies increases the technological risks involved. The end-customer interface might be far away, but there is not a lack of needs aimed at the product platforms ¿ in fact, the product platform development is very much balancing between the varying needs set to it by thederivative products. This dissertation concentrated on product platform development from the internal product lines' perspective of a singlecase. Altogether six product platform development factors were identified: 'Strategic and business fit of product platform', 'Project communication and deliverables', 'Cooperation with product platform development', 'Innovativeness of product platform architecture and features', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. From the six factors, three were found to influence quite strongly the overall satisfaction, namely 'Strategic and business fit of product platform', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. Hence, these three factors might be the ones a new product platform development unit should concentrate first in order to satisfy their closest customers, the product lines. The 'Project communication and deliverables' and 'Innovativeness of product platform architecture and features' were weaker contributors to the overall satisfaction. Overall, the factors explained quite well the satisfaction of the product lines with product platform development. Along the research, several interesting aspects about the very basic nature of the product platform development were found. The long time horizon of the product platform development caused challenges in the area of strategic fIT - a conflict between the short-term requirements and long term needs. The fact that a product platform was used as basis of several derivative products resulted into varying needs, and hence the match with the needs and the strategies. The opinions, that the releases of the larger product lines were given higher priorities, give an interesting contribution to the strategy theory of powerand politics. The varying needs of the product lines, the strengths of them as well as large number of concurrent releases set requirements to prioritization. Hence, the research showed the complicated nature of the product platform development in the case unIT - the very basic nature of the product platform development might be its strength (gaining efficiency and effectiveness in product development and product launches) but also the biggest challenge (developing products to meet several needs). As a single case study, the results of this research are not directly generalizable to all the product platform development activities. Instead, the research serves best as a starting point for additional research as well as gives some insights about the factors and challengesof one product development unit.