Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

Custos de produção e lucratividade de cultivares de mamona em diferentes arranjos de plantas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Obtenção e caracterização de um compósito de poliuretano de mamona e pó de vidro para aplicações em insolantes térmicos

Thermal insulation is used to protect the heated or cooled surfaces by the low thermal conductivity materials. The rigid ricin polyurethane foams (PURM) are used for thermal insulation and depend on the type and concentration of blowing agent. Obtaining PURM occurs by the use of polyol, silicone, catalyst and blowing agent are pre -mixed, reacting with the isocyanate. The glass is reusable, returnable and recyclable heat insulating material, whose time of heat dissipation determines the degree of relaxation of its structure; and viscosity determines the conditions for fusion, operating temperatures, annealing, etc. The production of PURM composites with waste glass powder (PV) represents economical and renewable actions of manufacturing of thermal insulating materials. Based on these aspects, the study aimed to produce and characterize the PURM composites with PV, whose the mass percentages were 5, 10, 20, 30, 40 and 50 wt%. PURM was obtained commercially, while the PV was recycled from the tailings of the stoning process of a glassmaking; when the refining process was applied to obtain micrometer particles. The PURM + PV composites were studied taking into account the standard sample of pure PURM and the influence of the percentage of PV in this PURM matrix. The results of the chemical, physical and morphological characterization were discussed taking into account the difference in the microstructural morphology of the PURM+PV composites and the pure PURM, as well the results of the physicochemical, mechanical e thermophysical tests by values obtained of density, hardness, compressive strength, specific heat, thermal conductivity and diffusivity. In general, the structure of pure PURM showed large, elongated and regular pores, while PURM+PV composites showed irregular, small and rounded pores with shapeless cells. This may have contributed to reducing their mechanical strength, especially for PURM - PV50. The hardness and density were found to have a proportional relationship with the PV content on PURM matrix. The specific heat, thermal diffusivity and thermal conductivity showed proportional relationship to each other. So, this has been realized that the increasing the PV content on PURM matrix resulted in the rise of diffusivity and thermal conductivity and the decrease of the specific heat. However, the values obtained by the PURM composites were similar the values of pure PURM, mainly the PURM-PV5 and PURM-PV10. Therefore, these composites can be applied like thermal insulator; furthermore, their use could reduce the production costs and to preserve the environment

Propriedades cerâmicas e imobilização do manganês em cerâmica estrutural

In this work is the addition of a metallic ion, of the metal Manganese, in a clay of Rio Grande do Norte state for structural ceramics use, the objective this study was to assess the evolution of ceramic properties. The clay was characterized by Chemical and Thermal analysis and Xray difraction. The metallic ion was added in the clay as aqueous solutions at concentrations of 100, 150 and 200 mg / L. The molded by extrusion and the burned were temperatures at 850, 950, 1050 and 1150 º C. Was made Chemical Analysis and investigated the following parameters environmental and ceramic: Solubility, Colour, Linear Retraction (%), Water Absorption (%), Gresification Curves, Apparent Porosity (%), Apparent Specific Mass (g/cm3) and Flexion Rupture Module (kgf/cm2). The results showed that increasing the concentration of metallic ion, properties such as Apparent Porosity (%), Water Absorption (%) decreases and the Flexion Rupture Module (kgf/cm2) increases with increasing temperature independent of the concentration of the ion. The gresification curves showed that the optimum firing temperatures were in the range between 950 and 1050 ° C. The evaluation of the properties showed that the ceramic material can be studied its use in solid brick and ceramic materials with structural function of filling. The results of solubility showed that the addition of ion offers no risk to the environment

Desempenho operacional e custos da operação de subsolagem em área de implantação de eucalipto

The knowledge of operating performance of agricultural machinery has become a crescent concern and of utmost importance since mechanized production costs are directly affected by the efficiency of the machine in the field. This study determined the operational performance and economy of a tractor in the subsoiling operation in function of slope classes. The analysis technique included a time and movement study and the economic analysis of the parameters operational cost, production cost and energy consumption. on the classes of slope evaluated, increasing the percentage of inclination of relief, lowered the operational performance and increased the production costs. The cost of fuel represented the greatest percentage among those that make up the operational cost.

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

Efeito da adição de lodo de estação de tratamento de água (ETA) nas propriedades de material cerâmico estrutural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese e caracterização estrutural do niobato de potássio e estrôncio com estrutura tipo Tetragonal Tungstênio Bronze TTB

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Essa marca de suor numa canção: o processo de redução estrutural na poesia de Zila Mamede

Die Beziehung zwischen Literatur und Gesellschaft wurden, im Laufe der Jahrhunderte, aus unterschiedlichen Perspektiven analysiert. Die Wissenschaftler analysieren manchmal die Aspekten der sozialen Realität, sie betonen manchmal die Natur der literarischen Werk. Wir glauben, dass Antonio Candido einen Gleichgewichtszustand erreicht, als er das Konzept der strukturellen Reduktion oder Formalisierung entwickelt. Nämlich, der Prozess, bei dem die menschliche und soziale Leben zu einem Bestandteil der literarischen Struktur wird. Der Autor tritt eine Einbahnstraße und er kann Daten aus der sozialen Ordnung aufholen, ohne dabei die Materialität des Textes den Augen verlieren. Und das sind die theoretische Annahmen, die die Entwicklung dieser Arbeit leiten. Wir wollen zu zeigen, dass die Struktur der mamediana Lyrik aufdeckt, signifikante Daten der Gesellschaft, in der der Autore eingefügt wurde enthüllt. Folglich, wir analysieren soziale Thema, das sein Werk durchzieht. Zuerst, wir untersuchen, wie Zila Mamede den Alltag der Gesellschaft vertreten. Von der strukturellen Organisation der Gedichte, wir erkennen, das die Episode aus kleiner Städte ein Akt des Widerstands gegen die fragmentierte Profil der kapitalistischen Gesellschaf sind. Das ist, warum sie doch eng mit der Idee der Tradition erscheinen. Die dichotome Beziehung zwischen den regionalen Daten und der Element der Modernisierung etabliert, sie wird durch die Organisation des Raumes verstärkt. Während die Stadt bei konkrete gesellschaftliche Ordnung Spitzenbeträge verweist, hat die Landschaft eine harmonische und warme Form. Allgemeinen, die moderne Stadt von Zila Mamede geformt, ist eine Abbild der Industriegesellschaft. Die Bilder die Landschaft sind ein Gegenmittel gegen die Feindseligkeiten Merkmale der neuen urbanen Zustand. So, die Landschaft hat die Funktion von Umstrukturierung der Persönlichkeit des Einzelnen durch die Erfahrung der großen Städte betroffen verdinglichenden. Der Konflikt, der durch das lyrische mamediana läuft, sind Reflexionen des Prozesses der Modernisierung der Stadt Natal, ihres eigenen Landes die politische Instabilität, sie durch verschiedene staatliche Programme ging, während Der Autor seine literarische Tätigkeit verfolgt

Caracterização magnética e estrutural de filmes depositados por gaiola catódica

Iron nitrite films, with hundred of nanometers thick, were deposited using the Cathodic cage plasma nitriding method, with a N2/H2 plasma, over a common glass substract. The structure, surface morphology and magnetic properties were investigated using X-ray diffractometry (XRD), atomic force microscopy (AFM) and vibrating sample magnetometer (VSM). XRD shows the formation of γ FeN phase and a combination of ζFe2N + ɛFe3N phases. The film s saturation magnetization and coercivity depends on morphology, composition, grain size and treatment temperature. Temperature raising from 250 ºC to 350 ºC were followed by an increase in saturation magnetization and film s surface coercivity on the parallel direction in relative proportion. This fact can be attributed to the grain sizes and to the different phases formed, since iron rich fases, like the ɛFe3N phase, emerges more frequently on more elevated treatment s temperature. Using this new and reasonably low cost method, it was possible to deposit films with both good adhesion and good magnetic properties, with wide application in magnetic devices

Custos e benefícios de um programa de exercício aeróbios na doença pulmonar obstrutica crônica: ensaio cliníco aleatório controlado

Pulmonary Rehabilitation, especially due to aerobic exercise, positive impact in reducing morbidity/mortality of patients with COPD, however the economic impact with costs of implementing simple programs of aerobic exercise are scarce. This is a blind randomized clinical trials, which aimed to evaluate the costs and benefits of a simple program of aerobic exercise in individuals with COPD, considering the financial costs of the Public Health System and its secondary endpoints. We evaluated lung function, the distance walked during six minutes of walking, the respiratory and peripheral muscle strength, quality of life related to health (QLRH), body composition and level of activity of daily living (ADL) before and after eight weeks of an aerobic exercise program consisting of educational guidance for both groups, control and intervention and supervised walks to the intervention group. The health costs generated in both groups were calculated following table Brazilian Public Health System. The sample consisted of forty patients, two being excluded in the initial phase of desaturation during the walk test six minutes. Were randomized into control and intervention group thirty-eight patients, three were excluded from the control group and one was excluded from the intervention group. At the end, thirty-four COPD comprised the sample, 16 in the control group and 18 in the intervention group (FEV1: 50.9 ± 14% pred and FEV1: 56 ± 0.5% pred, respectively). After for intervention, the intervention group showed improvement in meters walked, the sensation of dyspnea and fatigue at work, BODE index (p <0.01) in QLRH, ADL level (p <0.001) as well as increased strength lower limbs (p <0.05). The final cost of the program for the intervention group was R $ 148.75, including: assessments, hiking supervised by a physiotherapist and reassessments. No patient had exacerbation of IG, while 2 patients in the CG exacerbated, generating an average individual cost of R $ 689.15. The aerobic exercises in the form of walking showed significant clinical benefits and economic feasibility of its implementation, due to low cost and easy accessibility for patients, allowing them to add their daily practice of aerobic exercises

Custos e viabilidade econômica da produção de lambari-do-rabo amarelo em Monte Castelo/SP: um estudo de caso

The aim of this study was to analyze the cost of production and economic viability of production of Lambari in Monte Castelo/SP, with the primary market for the live-bait for sport fishing of carnivorous fish. To calculate the operating cost structure was used the model proposed by the Instituto de Economia Agricola from São Paulo/Brazil. In analyzing the economic viability of investment, we determined the Internal Rate of Return (IRR) and Pay Back Period. It was noted that the inputs represented approximately 74.0% of the EOC (Effective Operating Cost). In the rentability analysis (short term), there was an operating profit of R$ 3,133.45 for a cycle, with a profitability of 18.65% for four months of production, a cost price of R$ 13.02 kg(-1). For viability of the activity (long term), the results were attractive to recovery capital from the 3(rd) year (Pay Back), with an IRR of 25.68% and 89.0% return on the producer in 5 years (BCR - benefit cost ratio). The study of costs and economic viability analysis reinforce the importance of rational management in the productive system and the importance of planning and managing the profitability of the activity.

Modos de aplicação de calcário e de micronutrientes em pomar de laranjeira 'Natal' e análise comparativa de custos

De acordo com o Agrianual (2005), a produção citrícola brasileira é de 17,7 milhões de toneladas ano-1,ocupando aproximadamente 1 milhão de hectares no território brasileiro e, deste total, 810 mil hectares localizam-se no Estado de São Paulo. A maioria dos solos brasileiros, inclusive aqueles onde foram instalados os pomares cítricos, apresenta reação ácida. Esta é, sem dúvida, a principal condição desfavorável dos solos e um dos fatores limitantes da produção em solos tropicais. O presente trabalho teve por objetivo estudar o efeito de diferentes modos de aplicação de calcário e de micronutrientes e analisar, de forma comparativa, os custos destes tratamentos em um pomar de laranjeira. O experimento foi desenvolvido na Fazenda Morumbi, município de Estrela D'Oeste-SP, num Argissolo Vermelho-Amarelo. A variedade de laranjeira utilizada foi a 'Natal', enxertada em limão Cravo, com 6 anos de idade e espaçamento 5 x 8 m. O delineamento experimental foi em parcelas subdivididas, com 3 repetições, com 5 tratamentos principais (sem calcário; a necessidade total de calcário (NC) incorporado; NC sem incorporação; ¹/2 NC no primeiro ano + ¹/2 NC no segundo ano e ¹/3 NC no primeiro ano, + ¹/3 NC no segundo ano, + ¹/3 NC no terceiro ano) e dois tratamentos secundários [micronutrientes via solo (FTE-BR 12: 11,5 % de ZnO e B2O3; 1% CuO; 5,4% de Fe2O3; 5,5% de MnO2; 0,2% de MoO3) e micronutrientes via foliar (sulfato de zinco a 0,5% e ácido bórico a 0,08%)], distribuídos em blocos casualizados. Não houve efeito significativo dos modos de aplicação da calagem e de micronutrientes sobre as variáveis avaliadas (produção, sólidos solúveis totais, acidez total titulável). Para massa média do fruto, o efeito significativo aconteceu apenas no primeiro ano, com a calagem em dose única e sem incorporação, e micronutrientes via solo. Concluiu-se que não houve efeito significativo dos modos de aplicação do calcário e dos micronutrientes para produção e massa média dos frutos da laranjeira 'Natal', e a receita líquida foi positiva em todos os tratamentos, sendo que o tratamento 5 [¹/3 da necessidade total de calcário (NC) no 1º ano + ¹/3 da NC no 2º ano, + ¹/3 da NC no 3º ano] apresentou o melhor valor acumulado (U$ 3.721,85 ha-1).

Síntese e caracterização de óxidos de zinco e de magnésio suportados em A1SBA-15 para produção de biodiesel

To overcome the challenge of meeting growing energy demand in a sustainable way, biodiesel has shown very promising as alternative energy can replace fossil fuels, even partially. Industrially, the biodiesel is produced by homogeneous transesterification reaction of vegetable oils in the presence of basic species used as catalysts. However, this process is the need for purification of the esters obtained and the removal of glycerin formed after the reaction. This context, the alternative catalysts have that can improve the process of biodiesel production, aiming to reduce costs and facilitate its production. In this study, the AlSBA-15 support with Si / Al ratio = 50 was synthesized, as like as the heterogeneous catalysts of zinc oxide and magnesium supported on mesoporous AlSBA-15 silica, in the concentrations of 5, 10, 15 and 30 %, relative to the support. The textural properties and structural characterization of catalysts and supports were determined by techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) coupled to the chemical analyzer, adsorption / desorption of N2, thermal analysis (TG / DTG), absorption spectroscopy in the infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Characterization results indicated that the support AlSBA-15 retained the hexagonal ordered after the incorporation of zinc oxide and magnesium oxide in the holder. For heterogeneous catalysts, ZnO-AlSBA-15, that was observed the presence of zinc oxide nanoparticles dispersed in the surface and interior channels of the mesoporous and microporous support. The catalytic activity was evaluated by the transesterification reaction of sunflower oil via methylic route, and some reaction parameters were optimized with the most active catalyst in biodiesel production by sunflower oil. For the series of heterogeneous catalysts, the sample with 30 % ZnO supported on AlSBA-15 showed a better conversion of triglyceride to methyl esters, about 95.41 % of reaction conditions: temperature 175 °C, with molar ratio of 42:1, stirring at 200 rpm and under a pressure of 14 bar for 6 h. The catalyst MgO-AlSBA-15 showed no catalytic activity in the studied reactions

Síntese hidrotérmica e caracterização estrutural de titanatos nanotubulares para aplicação na captura do dióxido de carbono

Nanostructured materials have been spreading successfully over past years due its size and unusual properties, resulting in an exponential growth of research activities devoted to nanoscience and nanotechnology, which has stimulated the search for different methods to control main properties of nanomaterials and make them suitable for applications with high added value. In the late 90 s an alternative and low cost method was proposed from alkaline hydrothermal synthesis of nanotubes. Based on this context, the objective of this work was to prepare different materials based on TiO2 anatase using hydrothermal synthesis method proposed by Kasuga and submit them to an acid wash treatment, in order to check the structural behavior of final samples. They were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), adsorption/desorption of N2, thermal analysis (TG/DTA) and various spectroscopic methods such as absorption spectroscopy in the infrared (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All the information of characterizations confirmed the complete conversion of anatase TiO2 in nanotubes titanates (TTNT). Observing the influence of acid washing treatment in titanates structure, it was concluded that the nanotubes are formed during heat treatment, the sample which was not subjected to this process also achieved a complete phase transformation, as showed in crystallography and morphology results, however the surface area of them practically doubled after the acid washing. By spectroscopy was performed a discussion about chemical composition of these titanates, obtaining relevant results. Finally, it was observed that the products obtained in this work are potential materials for various applications in adsorption, catalysis and photocatalysis, showing great promise in CO2 capture