Fabrication of electrochemically reduced graphene oxide/cobalt oxide composite for charge storage electrodes

Electrochemically-reduced graphene oxide (Er-GO) and cobalt oxides (CoOx) were co-electrodeposited by cyclic voltammetry, from an electrolyte containing graphene oxide and cobalt nitrate, directly onto a stainless steel substrate to produce composite electrodes presenting high charge storage capacity. The electrochemical response of the composite films was optimized by studying the parameters applied during the electrodeposition process, namely the number of cycles, scan rate and ratio between GO/Co(NO3)(2) concentrations in the electrolyte. It is shown that, if the appropriate conditions are selected, it is possible to produced binder-free composite electrodes with improved electrochemical properties using a low-cost, facile and scalable technique. The optimized Er-GO/CoOx developed in this work exhibits a specific capacitance of 608 F g(-1) at a current density of 1 A g(-1) and increased reversibility when compared to single CoOx. (C) 2015 Elsevier B.V. All rights reserved.

Modelling a cable structure for a new wind energy production device

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica Especialização em Concepção e Produção

Algebraic structure for interaction on mixed models

Binary operations on commutative Jordan algebras, CJA, can be used to study interactions between sets of factors belonging to a pair of models in which one nests the other. It should be noted that from two CJA we can, through these binary operations, build CJA. So when we nest the treatments from one model in each treatment of another model, we can study the interactions between sets of factors of the first and the second models.

Genetic structure of Neisseria meningitidis serogroup C epidemic strains in South Brazil

In the present study we report the results of an analysis, based on serotyping, multilocus enzyme electrophoresis (MEE), and ribotyping of N. meningitidis serogroup C strains isolated from patients with meningococcal disease (MD) in Rio Grande do Sul (RS) and Santa Catarina (SC) States, Brazil, as the Center of Epidemiology Control of Ministry of Health detected an increasing of MD cases due to this serogroup in the last two years (1992-1993). We have demonstrated that the MD due to N.meningitidis serogroup C strains in RS and SC States occurring in the last 4 years were caused mainly by one clone of strains (ET 40), with isolates indistinguishable by serogroup, serotype, subtype and even by ribotyping. One small number of cases that were not due to an ET 40 strains, represent closely related clones that probably are new lineages generated from the ET 40 clone referred as ET 11A complex. We have also analyzed N.meningitidis serogroup C strains isolated in the greater São Paulo in 1976 as representative of the first post epidemic year in that region. The ribotyping method, as well as MEE, could provide useful information about the clonal characteristics of those isolates and also of strains isolated in south Brazil. The strains from 1976 have more similarity with the actual endemic than epidemic strains, by the ribotyping, sulfonamide sensitivity, and MEE results. In conclusion, serotyping with monoclonal antibodies (C:2b:P1.3), MEE (ET 11 and ET 11A complex), and ribotyping by using ClaI restriction enzyme (Rb2), were useful to characterize these epidemic strains of N.meningitidis related to the increased incidence of MD in different States of south Brazil. It is mostly probable that these N.meningitidis serogroup C strains have poor or no genetic corelation with 1971-1975 epidemic serogroup C strains. The genetic similarity of members of the ET 11 and ET 11A complex were confirmed by the ribotyping method by using three restriction endonucleases.

Demand Response Programs Definition Using Demand Price Elasticity to Define Consumers Aggregation for an Improved Remuneration Structure

The positioning of the consumers in the power systems operation has been changed in the recent years, namely due to the implementation of competitive electricity markets. Demand response is an opportunity for the consumers’ participation in electricity markets. Smart grids can give an important support for the integration of demand response. The methodology proposed in the present paper aims to create an improved demand response program definition and remuneration scheme for aggregated resources. The consumers are aggregated in a certain number of clusters, each one corresponding to a distinct demand response program, according to the economic impact of the resulting remuneration tariff. The knowledge about the consumers is obtained from its demand price elasticity values. The illustrative case study included in the paper is based on a 218 consumers’ scenario.

Remuneration Structure Definition for Distributed Generation Units and Demand Response Participants Aggregation

The implementation of competitive electricity markets has changed the consumers’ and distributed generation position power systems operation. The use of distributed generation and the participation in demand response programs, namely in smart grids, bring several advantages for consumers, aggregators, and system operators. The present paper proposes a remuneration structure for aggregated distributed generation and demand response resources. A virtual power player aggregates all the resources. The resources are aggregated in a certain number of clusters, each one corresponding to a distinct tariff group, according to the economic impact of the resulting remuneration tariff. The determined tariffs are intended to be used for several months. The aggregator can define the periodicity of the tariffs definition. The case study in this paper includes 218 consumers, and 66 distributed generation units.

Evolution of Drug Resistance: Insight on TEM β-Lactamases Structure and Activity and β-Lactam Antibiotics

Since the discovery of the first penicillin bacterial resistance to β-lactam antibiotics has spread and evolved promoting new resistances to pathogens. The most common mechanism of resistance is the production of β-lactamases that have spread thorough nature and evolve to complex phenotypes like CMT type enzymes. New antibiotics have been introduced in clinical practice, and therefore it becomes necessary a concise summary about their molecular targets, specific use and other properties. β-lactamases are still a major medical concern and they have been extensively studied and described in the scientific literature. Several authors agree that Glu166 should be the general base and Ser70 should perform the nucleophilic attack to the carbon of the carbonyl group of the β-lactam ring. Nevertheless there still is controversy on their catalytic mechanism. TEMs evolve at incredible pace presenting more complex phenotypes due to their tolerance to mutations. These mutations lead to an increasing need of novel, stronger and more specific and stable antibiotics. The present review summarizes key structural, molecular and functional aspects of ESBL, IRT and CMT TEM β-lactamases properties and up to date diagrams of the TEM variants with defined phenotype. The activity and structural characteristics of several available TEMs in the NCBI-PDB are presented, as well as the relation of the various mutated residues and their specific properties and some previously proposed catalytic mechanisms.

Sistemas de fachadas em perfilaria de alumínio, painel compósito em Alucobond e estruturas metálicas

A memória descritiva do estágio transcreve e revela os conhecimentos adquiridos ao longo do curso e aplicados ao longo do estágio, bem como todos aqueles obtidos e aperfeiçoados no estágio, nomeadamente no que espeita a planeamento, controlo de custos, aprovisionamento, preparação dos materiais e elaboração de autos de medição. Para um melhor aprofundamento destes conceitos, foi proposto pela empresa, o acompanhamento técnico de duas obras, contudo, ambas distintas quer ao nível de materiais e execução. Primeiramente, é feita uma pequena apresentação da empresa assim como uma descrição global das duas obras que foram propostas pela empresa, para fazer o acompanhamento técnico ao longo do estágio Apresentados os traços gerais do estágio é realizada uma pequena exposição teórica dos dois principais elementos, alumínio e aço, constituintes dos principais materiais utilizados nas duas obras em acompanhamento, indicando alguns dados sobre o seu modo de produção e caracterização física e mecânica. Nos dois capítulos seguintes faz-se uma descrição dos principais trabalhos realizados em ambas as obras. Na obra da rua Alfredo do Guisado são enunciados todas as tarefas da produção e da preparação em oficina para aplicação em obra de uma fachada ventilada em painel compósito de Alucobond. No que respeita a obra da Caetano Parts é feito o enquadramento do acompanhamento técnico em todas as tarefas desempenhadas pelas oficinas, descrevendo todos os processos envolvidos desde a preparação, aprovisionamento, tratamento e montagem dos diferentes materiais em obra. Por fim, são apresentadas algumas considerações finais do estágio desenvolvido.

The Crystal Structure of the Escherichia coli Autoinducer-2 Processing Protein LsrF

PLOS ONE, 4(8):ARTe6820

Influence of commercially available polyimide and formation conditions on the performance and structure of asymmetric polyimide organic solvent nanofiltration membranes

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia Química e Bioquímica

How composite indicators of innovation can influence technology policy decision?

Based on the report for Project III of the PhD programme on Technology Assessment and prepared for the Winter School that took place at Universidade Nova de Lisboa, Caparica Campus on the 6th and 7th of December 2010.

Dimensionamento de pilares mistos aço-betão segundo a EN 1994-1-1 através de uma aplicação informática

O presente trabalho debruça-se sobre as estruturas mistas aço-betão, com foco nos pilares mistos e no seu dimensionamento segundo a norma europeia EN1994-1-1 (EC4) [1]. Um pilar misto aço-betão pode definir-se como um elemento de aço, laminado ou composto, que trabalha em conjunto com o betão, podendo as secções serem classificados como revestidas ou preenchidas. Com a crescente evolução das técnicas construtivas, as estruturas mistas aço-betão aparecem como soluções viáveis e seguras, tornando-se numa opção competitiva em relação às soluções tradicionais de betão armado e de aço estrutural. Isto, devido à grande capacidade de carga proporcionada por secções mais reduzidas, à boa relação de rigidez e bom comportamento perante os fenómenos de encurvadura. Com o surgimento da recente norma europeia EC4, não obstante a complexidade das metodologias de verificação da segurança propostas, há uma maior confiança na utilização deste tipo de estrutura por parte dos projetistas. É neste contexto que surge a necessidade de desenvolver ferramentas de cálculo expedito que possam ser utilizadas em gabinete de projeto, salvaguardando todos os aspectos regulamentares de verificação da segurança preconizados no EC4, de que é exemplo o dimensionamento de pilares mistos abordados no presente trabalho. De forma a validar a ferramenta desenvolvida é proposto um caso de estudo, com o objectivo de obter soluções de pilares mistos com dimensões otimizadas, fazendo as verificações previstas no EC4. Os resultados obtidos na ferramenta são comparados com os resultados obtidos através de cálculos analíticos.

Electrospun Polyaniline-Reduced Graphene Oxide Composite Nanofibers Based High Sensitive Ammonia Gas Sensor

Ammonia is an important gas in many power plants and industrial processes so its detection is of extreme importance in environmental monitoring and process control due to its high toxicity. Ammonia’s threshold limit is 25 ppm and the exposure time limit is 8 h, however exposure to 35 ppm is only secure for 10 min. In this work a brief introduction to ammonia aspects are presented, like its physical and chemical properties, the dangers in its manipulation, its ways of production and its sources. The application areas in which ammonia gas detection is important and needed are also referred: environmental gas analysis (e.g. intense farming), automotive-, chemical- and medical industries. In order to monitor ammonia gas in these different areas there are some requirements that must be attended. These requirements determine the choice of sensor and, therefore, several types of sensors with different characteristics were developed, like metal oxides, surface acoustic wave-, catalytic-, and optical sensors, indirect gas analyzers, and conducting polymers. All the sensors types are described, but more attention will be given to polyaniline (PANI), particularly to its characteristics, syntheses, chemical doping processes, deposition methods, transduction modes, and its adhesion to inorganic materials. Besides this, short descriptions of PANI nanostructures, the use of electrospinning in the formation of nanofibers/microfibers, and graphene and its characteristics are included. The created sensor is an instrument that tries to achieve a goal of the medical community in the control of the breath’s ammonia levels being an easy and non-invasive method for diagnostic of kidney malfunction and/or gastric ulcers. For that the device should be capable to detect different levels of ammonia gas concentrations. So, in the present work an ammonia gas sensor was developed using a conductive polymer composite which was immobilized on a carbon transducer surface. The experiments were targeted to ammonia measurements at ppb level. Ammonia gas measurements were carried out in the concentration range from 1 ppb to 500 ppb. A commercial substrate was used; screen-printed carbon electrodes. After adequate surface pre-treatment of the substrate, its electrodes were covered by a nanofibrous polymeric composite. The conducting polyaniline doped with sulfuric acid (H2SO4) was blended with reduced graphene oxide (RGO) obtained by wet chemical synthesis. This composite formed the basis for the formation of nanofibers by electrospinning. Nanofibers will increase the sensitivity of the sensing material. The electrospun PANI-RGO fibers were placed on the substrate and then dried at ambient temperature. Amperometric measurements were performed at different ammonia gas concentrations (1 to 500 ppb). The I-V characteristics were registered and some interfering gases were studied (NO2, ethanol, and acetone). The gas samples were prepared in a custom setup and were diluted with dry nitrogen gas. Electrospun nanofibers of PANI-RGO composite demonstrated an enhancement in NH3 gas detection when comparing with only electrospun PANI nanofibers. Was visible higher range of resistance at concentrations from 1 to 500 ppb. It was also observed that the sensor had stable, reproducible and recoverable properties. Moreover, it had better response and recovery times. The new sensing material of the developed sensor demonstrated to be a good candidate for ammonia gas determination.

Sarcosine oxidase composite screen-printed electrode for sarcosine determination in biological samples

As the prostate cancer (PCa) progresses, sarcosine levels increase both in tumor cells and urine samples, suggesting that this metabolite measurements can help in the creation of non-invasive diagnostic methods for this disease. In this work, a biosensor device was developed for the quantification of sarcosine via electrochemical detection of H2O2 (at 0.6 V) generated from the catalyzed oxidation of sarcosine. The detection was carried out after the modification of carbon screen printed electrodes (SPEs) by immobilization of sarcosine oxidase (SOX) on the electrode surface. The strategies used herein included the activation of the carbon films by an electrochemical step and the formation of an NHS/EDAC layer to bond the enzyme to the electrode, the use of metallic or semiconductor nanoparticles layer previously or during the enzyme immobilization. In order to improve the sensor stability and selectivity a polymeric layer with extra enzyme content was further added. The proposed methodology for the detection of sarcosine allowed obtaining a limit of detection (LOD) of 16 nM, using a linear concentration range between 10 and 100 nM. The biosensor was successfully applied to the analysis of sarcosine in urine samples.

Sarcosine oxidase composite screen-printed electrode for sarcosine determination in biological samples

XIX Meeting of the Portuguese Electrochemical Society - XVI Iberic Meeting of Electrochemistry