Caracterização da tecnologia de frio comercial e profissional

Hoje em dia a preocupação ambiental e a economia são fatores de sustentabilidade que são tidos em conta em países desenvolvidos, especialmente no seio da União Europeia. Reduzir os consumos de energia é, portanto, um ponto-chave para a redução das emissões de gases com efeito de estufa e aumentar a dependência das energias renováveis. Consequentemente surge então a necessidade de aumentar a eficiência dos equipamentos, em particular no presente caso, equipamentos de refrigeração. Para isso foi adotado pela Comissão Europeia uma rotulagem nos produtos consumidores de energia, em particular na refrigeração, os frigoríficos e congeladores domésticos permitindo informar o consumidor para os equipamentos mais eficientes. Mais recentemente, frigoríficos comerciais e profissionais também terão obrigatoriedade de incluir um rótulo energético na parte externa dos mesmos. Nesses rótulos estão incluídas várias informações técnicas do aparelho representadas de uma forma compreensível e lúdica aos olhos do consumidor mais leigo, entre as quais as classes de eficiência energética. As classes de eficiência energética caracterizam-se pela componente tecnológica dos frigoríficos. Perceber quais os componentes e materiais em particular que promovem uma melhor eficiência, quantificar a sua influência e avaliar os seus custos de integração torna-se assim essencial para toda a cadeia envolvida na produção destes equipamentos. Os fluídos frigorigénios e compressores aparentam ser os que mais exercem influência na eficiência de frigoríficos de baixa potência. Tubos capilares com trocador de calor são uma escolha mais eficiente comparado com o tubo capilar padrão que é utilizado nestes frigoríficos. Por forma a obter informação adicional e relevante do ponto de vista da análise energética realizaram-se simulações para determinação do consumo elétrico anual com recurso ao software Pack Calculation Pro. Entre os fluídos frigorigénios R-134a, R-22 e R-410a, os compressores scroll apresentaram consumos mais reduzidos (no máximo de 16%) do que os compressores alternativos. No caso do amoníaco (R-717) os compressores alternativos consumiram em média 14% menos do que os compressores parafuso. O recurso a velocidade variável em compressores permite reduzir o consumo na ordem dos 25%. Válvulas de expansão eletrónicas trazem reduções no consumo de 1,5% quando comparadas com válvulas de expansão termostáticas em compressores de velocidade variável. O propano (R-290) é um gás que mostra ter um melhor desempenho do que o R-134a e R404a em vários compressores, consumindo 16% menos do que o R-404a. Em função da temperatura exterior, o R-290 também apresentou um bom desempenho consumindo em climas quentes (Belém, Brasil) 24% menos do que o R-404a.

Proposta de método para avaliação do desempenho térmico de residências unifamiliares em clima quente e úmido

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Adequação bioclimática para os espaços urbanos abertos do centro de Fortaleza, CE

This research presents a study investigating the correlation between the environmental-physycal charcateristics of cities and the formation of its micro-climates. The study was conducted in the central area of Fortaleza characterized as a stable and consolidated area, where the city originated and currently faces serious problems in its urban dynamics. The points of measurements were determined by the elaboration and analysis of topography maps, height of buildings, land use, type of surface coating and vegetation, following the methodology of Katzschner (1997). A zoning map was then determined, according to common morphological characteristics of the 12 measurement points, which were based on a set of Romero s (2001) bioclimatic criteria. Air measurements, temperature, humidity, intensity and direction of winds were made in transect form in two different circuits in the study area, with six points of data collection in each area, in three different times: 6:00 am, 1:00pm and 7:00pm, during two periods of the year: August 2008 and March 2009. The results verified the influence of different environmental-physical types in the behavior of the climatic variables that were collected. A verticalização tão condenada em algumas situações se bem equilibrada e controlada pode reduzir as temperaturas do ar através do sombreamento dos espaços urbanos e possibilidade de maior permeabilidade a ventilação natural. The highest average air temperature and lower humidity were recorded at the point I at all times. This situation may have been in result of the high density, poor vegetation and extended paving of the ground. According to the results, it s clear the positive influence vegetation has on easing air temperature. Another indicator observed that areas with a greater variation in building heights tend to present decreased average air temperature. High rise structure, planned in accordance to urban air quality parameters, can reduce air temperatures by the shading of urban spaces and the possibility of greater penetration of natural ventilation

Simulação computacional como ferramenta de auxílio ao projeto: aplicação em edifícios naturalmente ventilados no clima de Natal/RN

Natural air ventilation is the most import passive strategy to provide thermal comfort in hot and humid climates and a significant low energy strategy. However, the natural ventilated building requires more attention with the architectural design than a conventional building with air conditioning systems, and the results are less reliable. Therefore, this thesis focuses on softwares and methods to predict the natural ventilation performance from the point of view of the architect, with limited resource and knowledge of fluid mechanics. A typical prefabricated building was modelled due to its simplified geometry, low cost and occurrence at the local campus. Firstly, the study emphasized the use of computational fluid dynamics (CFD) software, to simulate the air flow outside and inside the building. A series of approaches were developed to make the simulations possible, compromising the results fidelity. Secondly, the results of CFD simulations were used as the input of an energy tool, to simulate the thermal performance under different rates of air renew. Thirdly, the results of temperature were assessed in terms of thermal comfort. Complementary simulations were carried out to detail the analyses. The results show the potentialities of these tools. However the discussions concerning the simplifications of the approaches, the limitations of the tools and the level of knowledge of the average architect are the major contribution of this study

Padronização e flexibilidade: proposta de um edifício tipo para uma escola técnica profissionalizante

Nowadays the acquisition of sustainable elements and concepts in construction has been increasingly discussed, improved and incorporated to buildings, since the sector directly interferes in the urban space and environment, representing environmental impact. In order to make a sustainable building (Green Building) it is vital to incorporate less damaging constructive practice, starting from the project until the operation of the enterprise, that means to consider an integrated process of conception, implementation, construction and operation. The more effective sustainable principles participation in architecture happens at the projecting step through minimal environment impact solutions. Among the issues varieties that goes with sustainability proposal of the buildings project, there were added to this work the elements that are directly attached to bioclimatic architecture, more specifically the climate variation, ventilation, lighting and sunlight, that directly affect the project conception. It is important to put in evidence that architecture role goes far beyond the simple activity of building spaces; it is the sequence of political, economic, social and cultural elements, having the users as the main apparatus to its materialization. Thereby this professional dissertation consists of an architecture draft for a professional and technological school in the Rio Grande do Norte State, this dissertation is based on the analysis of previous experience and the bioclimatic principles that implicate in building on hot and dry, hot and humid climates, and the use of strategic solutions that aim the optimization of natural light and ventilation

Climate change and irrigation water requirement at Jaguaribe river basin, semi-arid northeast of Brazil.

Summary: Climate change has a potential to impact rainfall, temperature and air humidity, which have relation to plant evapotranspiration and crop water requirement. The purpose of this research is to assess climate change impacts on irrigation water demand, based on future scenarios derived from the PRECIS (Providing Regional Climates for Impacts Studies), using boundary conditions of the HadCM3 submitted to a dynamic downscaling nested to the Hadley Centre regional circulation model HadRM3P. Monthly time series for average temperature and rainfall were generated for 1961-90 (baseline) and the future (2040). The reference evapotranspiration was estimated using monthly average temperature. Projected climate change impact on irrigation water demand demonstrated to be a result of evapotranspiration and rainfall trend. Impacts were mapped over the target region by using geostatistical methods. An increase of the average crop water needs was estimated to be 18.7% and 22.2% higher for 2040 A2 and B2 scenarios, respectively. Objective ? To analyze the climate change impacts on irrigation water requirements, using downscaling techniques of a climate change model, at the river basin scale. Method: The study area was delimited between 4º39?30? and 5º40?00? South and 37º35?30? and 38º27?00? West. The crop pattern in the target area was characterized, regarding type of irrigated crops, respective areas and cropping schedules, as well as the area and type of irrigation systems adopted. The PRECIS (Providing Regional Climates for Impacts Studies) system (Jones et al., 2004) was used for generating climate predictions for the target area, using the boundary conditions of the Hadley Centre model HadCM3 (Johns et al., 2003). The considered time scale of interest for climate change impacts evaluation was the year of 2040, representing the period of 2025 to 2055. The output data from the climate model was interpolated, considering latitude/longitude, by applying ordinary kriging tools available at a Geographic Information System, in order to produce thematic maps.

Energy performance comparison of three innovative HVAC systems for renovation through dynamic simulation

In this paper, dynamic simulation was used to compare the energy performance of three innovativeHVAC systems: (A) mechanical ventilation with heat recovery (MVHR) and micro heat pump, (B) exhaustventilation with exhaust air-to-water heat pump and ventilation radiators, and (C) exhaust ventilationwith air-to-water heat pump and ventilation radiators, to a reference system: (D) exhaust ventilation withair-to-water heat pump and panel radiators. System A was modelled in MATLAB Simulink and systems Band C in TRNSYS 17. The reference system was modelled in both tools, for comparison between the two.All systems were tested with a model of a renovated single family house for varying U-values, climates,infiltration and ventilation rates.It was found that A was the best system for lower heating demand, while for higher heating demandsystem B would be preferable. System C was better than the reference system, but not as good as A or B.The difference in energy consumption of the reference system was less than 2 kWh/(m2a) betweenSimulink and TRNSYS. This could be explained by the different ways of handling solar gains, but also bythe fact that the TRNSYS systems supplied slightly more than the ideal heating demand.

Niveles de actividad física de niños y adolescentes durante las clases de educación física en tres colegios oficiales de Bogotá

La clase de educación física es un espacio en el cual los niños y adolescentes pueden incrementar los niveles de actividad física y alcanzar las recomendaciones emitidas por la Organización Mundial de la Salud (OMS), sin embargo, existe poca evidencia científica a nivel nacional sobre las actividades físicas que realizan los estudiantes dentro del ámbito escolar, específicamente dentro de las clases de educación física y sus relaciones con el contexto; es por esto que el objetivo de este estudio fue evaluar los niveles de actividad física de niños y adolescentes durante las clases de educación física en tres colegios oficiales de Bogotá, Colombia, por medio de la herramienta SOFIT. Estudio de diseño descriptivo y transversal realizado entre octubre de 2014 y mayo de 2015. Las observaciones se llevaron a cabo en tres colegios oficiales de la ciudad de Bogotá ubicados en las localidades de Tunjuelito y Ciudad Bolívar que aceptaron su participación en la investigación. Se obtuvo la aprobación para participar de 1361 estudiantes (682 niñas y 679 niños) de 5 a 17 años de los cuales 180 estudiantes (93 niños y 87 niñas) fueron seleccionados de manera aleatoria sistemática, siguiendo el protocolo SOFIT para observar su nivel de actividad física durante las clases de educación física. El 45,23% del tiempo de la clase de educación física los estudiantes mantuvieron un comportamiento sedentario; mientras que el 30.91% y el 23.86% del tiempo de la clase presentaron un nivel de actividad física moderada (AFM) y vigorosa (AFV) respectivamente. El nivel de actividad física moderada a vigorosa (AFMV), fue de 54,78% es decir, 35,27 minutos de la clase. Los docentes no promovieron la actividad física en un 56,47% del tiempo de la clase y se encontró que ningún docente promovió la actividad física fuera de la clase, es decir, alentando a sus estudiantes a que practicaran cualquier forma de actividad física en horas extraescolares. El contexto de la clase que más se desarrolló fue la condición física con un 35,66% del tiempo de la clase, seguido por los contextos de generalidades 24,83% y habilidades 23,84%. El contexto de la clase generalidades está asociada significativamente y de manera negativa (β=-0,32, p=0,006) con menor porcentaje de tiempo en AFM y AFV, las variables activas de SOFIT, lo que sugiere que las clases deben invertir menos tiempo en este contexto e incrementar el porcentaje de tiempo en los otros contextos como condición física y habilidades para aumentar la cantidad de minutos de AFMV en los estudiantes.

Análisis del concepto de liderazgo y sus aplicaciones en el contexto empresarial

El presente trabajo se realizó con el objetivo de tener una visión completa de las teorías del liderazgo, teniendo de este una concepción como proceso y poder examinar las diversas formas de aplicación en las organizaciones contemporáneas. El tema es enfocado desde la perspectiva organizacional, un mundo igualmente complejo, sin desconocer su importancia en otros ámbitos como la educación, la política o la dirección del estado. Su enfoque tiene que ver con el estudio académico del cual es la culminación y se enmarca dentro de la perspectiva constitucional de la Carta Política Colombiana que reconoce la importancia capital que tienen la actividad económica y la iniciativa privada en la constitución de empresas. Las diversas visiones del liderazgo han sido aplicadas de distintas maneras en las organizaciones contemporáneas y han generado diversos resultados. Hoy, no es posible pensar en una organización que no haya definido su forma de liderazgo y en consecuencia, confluyen en el campo empresarial multitud de teorías, sin que pueda afirmarse que una sola de ellas permita el manejo adecuado y el cumplimiento de los objetivos misionales. Por esta razón se ha llegado a concebir el liderazgo como una función compleja, en un mundo donde las organizaciones mismas se caracterizan no solo por la complejidad de sus acciones y de su conformación, sino también porque esta característica pertenece también al mundo de la globalización. Las organizaciones concebidas como máquinas que en sentido metafórico logran reconstituirse sus estructuras a medida que están en interacción con otras en el mundo globalizado. Adaptarse a las cambiantes circunstancias hace de las organizaciones conglomerados en permanente dinámica y evolución. En este ámbito puede decirse que el liderazgo es también complejo y que es el liderazgo transformacional el que más se acerca al sentido de la complejidad.

Influencia del líder en el clima organizacional

En este trabajo se evidenciará cómo el liderazgo y el clima organizacional, que son dos componentes importantes dentro de una organización, están estrechamente ligados de tal forma que uno se ve afectado por el otro bien sea de manera positiva o negativa. Así de esta manera quisimos evidenciar este lazo entre liderazgo y clima organizacional con base en el liderazgo auténtico, el cual surge como una nueva teoría alrededor de varios componentes esenciales en el líder: conciencia de sí mismo, transparencia en las relaciones, procesamiento equilibrado y moral internalizada (Walumbwa, Avolio, Gardner, Wernsing, Peterson, 2008). En la misión empresarial realizada en la ciudad de Nueva York desarrollamos nuestro trabajo de campo. Visitamos empresas de reconocimiento a nivel mundial tales como: Google, Bloomberg, N&C Company y Procolombia. En estas empresas investigamos por medio de encuestas qué estilo de liderazgo existía y lo contrastamos con el clima organizacional. Para nosotros la experiencia fue muy enriquecedora pues todas las organizaciones nos brindaron información muy importante para el desarrollo de la investigación. Encontramos que las empresas siguen un patrón de comportamiento similar: el trabajo en equipo, la innovación, la autonomía, la comunicación, la autoevaluación y la transparencia, fueron elementos que evidenciamos durante la misión empresarial realizada.

Relación entre los riesgos percibidos por los trabajadores en minería subterránea y los accidentes de trabajo y enfermedades laborales

Introducción: La minería es considerada uno de los sectores económicos más importantes por su capacidad para generar recursos en su propio sector y en otros sectores como metalmecánica, agricultura e informática entre otros, y por su contribución al desarrollo socioeconómico sostenible de las poblaciones. Objetivo: Determinar la relación entre los riesgos percibidos por los trabajadores que laboran en minería subterránea en 3 departamentos de Colombia y los Accidentes de Trabajo (AT) y Enfermedades Laborales (EL). Materiales y Métodos: Estudio de corte transversal en 476 trabajadores de minería subterránea. Se incluyeron variables independientes (características sociodemográficas y laborales y percepción del riesgo) y variables dependientes (enfermedad laboral y accidente de trabajo), obtenidas a través de una entrevista directa aplicada por profesionales de la salud previamente capacitados. Para el análisis estadístico se utilizó la Prueba Exacta de Fisher, el Odds Ratio (OR) con el Intervalo de Confianza (IC) del 95%. Resultados: En los trabajadores de minería subterránea en los departamentos de Boyacá, Cundinamarca y Santander, se encontró relación estadística significativa entre la accidentalidad con la percepción de riesgo por iluminación (OR= 2.059, IC= 95%: 1.116, 3.798, p=0.013), percepción de riesgo por movimientos repetitivos (OR= 1.951, IC= 95%: 0.998, 3.815, p=0.034), percepción de riesgo por ruido (OR= 2.275, IC= 95%: 0.974, 5.312, p=0.039) y percepción de riesgo por manejo de cargas (OR= 1.778, IC= 95%: 0.969, 3.264, p=0.041). Conclusión: se encontró que existe una relación significativa entre la percepción de riesgo de los trabajadores de minería subterránea con accidentes de trabajo y que no existe relación entre esta percepción y las enfermedades laborales.

Liderazgo Responsable: Una revisión de la literatura

El objetivo del presente artículo es profundizar en los conceptos de liderazgo responsable y responsabilidad social empresarial, basándose en un marco referencial y bibliográfico pertinente para la investigación. Para ello, se realizó una exhaustiva búsqueda de referencias bibliográficas, tales como artículos científicos, publicaciones académicas y estudios de caso, que ayudaron a dar un acercamiento conceptual al tema principal. Se encontraron diferentes aproximaciones conceptuales sobre el liderazgo responsable y la importancia que tiene en términos de responsabilidad social, algunas teorías del liderazgo, estilos de liderazgo responsable, la satisfacción laboral y por ultimo una serie de casos empresariales que ponen estos conceptos en práctica.

Adaptive strategies of two Portuguese grapevines varieties (Aragonês. syn. Tempranillo and Trincadeira) face drought: physiological and structural responses.

At Mediterranean regions and particularly in southern Portugal, it is imperative to identify grape varieties more adapted to warm and dry climates in order to overcome future climatic changes. Two Vitis vinifera genotypes, Aragonez (syn. Tempranillo) and Trincadeira, were selected to assess their physiological responses to soil water stress. Vines were subjected to four irrigation regimes: irrigated during all phenological cycle, non-irrigated during all phenological cycle, non irrigated until veraison, irrigated after veraison. Predawn leaf water potential was much higher in Trincadeira than Aragonez in non- irrigated plants. This result is in accordance with its higher stomatal control efficiency in this variety (Trincadeira). Photosynthetic capacity (Amax at saturating light intensity) decreased due to stomatal and biochemical limitations under water stress. However, recovery capacity of leaf water status after irrigation was faster in Trincadeira. Yield and yield x Brix increased when irrigation occurred after veraison, particularly in Trincadeira. These results show that Trincadeira presents a drought adaptation than Aragonez. Ratio of variable to maximum fluorescence Fv/Fm and total leaf chlorophyll related with leaf water potential for both species. Reflectance Normalized Difference Vegetation Index (NDVI705), Red Edge Inflexion Point Index and Photochemical Reflectance Index were related with irrigation treatment. Relative water content and specific leaf area were similar between varieties. In conclusion, we suggested that there is variation among the genotypes and the main physiological parameters for variety selection, for drought, were leaf water potential, stomatal conductance and reflectance indexes.