Validation of a case definition for leptospirosis diagnosis in patients with acute severe febrile disease admitted in reference hospitals at the State of Pernambuco, Brazil

INTRODUCTION: Leptospirosis is often mistaken for other acute febrile illnesses because of its nonspecific presentation. Bacteriologic, serologic, and molecular methods have several limitations for early diagnosis: technical complexity, low availability, low sensitivity in early disease, or high cost. This study aimed to validate a case definition, based on simple clinical and laboratory tests, that is intended for bedside diagnosis of leptospirosis among hospitalized patients. METHODS: Adult patients, admitted to two reference hospitals in Recife, Brazil, with a febrile illness of less than 21 days and with a clinical suspicion of leptospirosis, were included to test a case definition comprising ten clinical and laboratory criteria. Leptospirosis was confirmed or excluded by a composite reference standard (microscopic agglutination test, ELISA, and blood culture). Test properties were determined for each cutoff number of the criteria from the case definition. RESULTS: Ninety seven patients were included; 75 had confirmed leptospirosis and 22 did not. Mean number of criteria from the case definition that were fulfilled was 7.8±1.2 for confirmed leptospirosis and 5.9±1.5 for non-leptospirosis patients (p<0.0001). Best sensitivity (85.3%) and specificity (68.2%) combination was found with a cutoff of 7 or more criteria, reaching positive and negative predictive values of 90.1% and 57.7%, respectively; accuracy was 81.4%. CONCLUSIONS: The case definition, for a cutoff of at least 7 criteria, reached average sensitivity and specificity, but with a high positive predictive value. Its simplicity and low cost make it useful for rapid bedside leptospirosis diagnosis in Brazilian hospitalized patients with acute severe febrile disease.

Profile of pregnant women and children treated at a reference center for congenital toxoplasmosis in the northern state of Minas Gerais, Brazil

INTRODUCTION: To describe the clinical and epidemiological profile of pregnant women and children treated at a reference outpatient clinic for congenital toxoplasmosis. METHODS: Pregnant women potentially exposed to Toxoplasma gondii were observed. Diagnoses were made using serologic tests compatible with acute toxoplasmosis. Children presenting with: Toxoplasma-specific antibodies (IgM or IgA or ascending IgG titers higher than maternal titers in the first 3 months of life) coupled with toxoplasmosis symptoms; intracranial calcifications (by transfontanelar ultrasound or cephalic segment tomography); or retinochoroiditis (by fundoscopy examination) in the first 8 months of life were also included in the study. RESULTS: Fifty-eight mother-child pairs were observed (mean age of the mothers was 22.1 years). Most patients lived in urban areas (86.2%) and had attended less than 8 years of school (51.7%). Diagnosis was made after birth in 19 (32.8%) children. Thirty-four (58.6%) women received some type of treatment during pregnancy. Most (72.4%) of the children did not present with clinical alterations at birth. The main findings were ophthalmological: 20 (34.5%) children with retinochoroiditis, 17 (29.3%) with strabismus, and 7 (12.1%) with nystagmus. Of the children with retinochoroiditis, 9 presented with subnormal vision. Ten (32.3%) out of 31 children presented with intracranial calcifications by cephalic segment congenital toxoplasmosis, and 9 (42.9%) children presented with delayed psychomotor development. CONCLUSIONS: Our results highlight a critical situation. Protocols for follow-up of pregnant women and their children must be created to improve medical care and minimize sequelae.

Demographic determinants of survival of people living with HIV attending an outpatient reference unit in the city of Três Lagoas, state of Mato Grosso do Sul, Brazil, in the period 1984-2009

INTRODUCTION: While the incidence of HIV infection and AIDS is increasing in small Brazilian cities, epidemiological studies are often conducted in large urban centers. METHODS: Our group conducted a retrospective analysis of survival determinants among 358 patients who attended a reference unit in a small city. RESULTS: Death risk was lower among men that had sex with men, patients with an HIV-seropositive partner, and those admitted after highly active antiretroviral therapy (HAART) was available. CONCLUSIONS: The study documents the striking beneficial effect of HAART. The finding of other groups with improved survival may aid in the development of programmatic strategies.

Spontaneous reporting of adverse events following pandemic influenza A (H1N1) immunization in a reference center in the State of Sao Paulo, Brazil

Introduction This paper describes adverse events (AEs) temporally associated to the pandemic influenza A (H1N1) vaccine observed in a reference center in São Paulo, Brazil, during a 2010 mass vaccination campaign. Methods A retrospective study involving persons who sought medical care for AEs following influenza vaccination. Data were retrieved from medical records, vaccine AE notification forms, and a computerized system for immunobiological registration. Results Sixty-six vaccinees sought medical care for AEs after immunization. The most frequent AEs were fever, headache, myalgia, and pain at the injection site. No serious AEs were reported. Conclusions Few vaccinees spontaneously reported AEs to influenza A (H1N1) vaccine at this center.

Dengue infection in children and adolescents: Clinical profile in a reference hospital in northeast Brazil

Introduction This study aimed to describe the clinical spectrum of dengue in children and adolescents from a hyperendemic region who were admitted for hospitalization. Methods A retrospective study was conducted on patients diagnosed with dengue infection upon admission to a reference center in Fortaleza, Brazil. Results Of the 84 patients included, 42 underwent confirmatory testing. The main symptoms were fever, abdominal pain and vomiting. The median level of serum aspartate aminotransferase was 143.5±128mg/dL. Conclusions A peculiar clinical profile was evident among children and adolescents with dengue infection in a reference center in northeast Brazil, including gastrointestinal symptoms and liver involvement.

In vitro antimalarial activity of tigecycline against Plasmodium falciparum culture-adapted reference strains and clinical isolates from the Brazilian Amazon

Introduction: We evaluated the in vitro antimalarial activity of tigecycline as an alternative drug for the treatment of severe malaria. Methods: A chloroquine-sensitive Plasmodium falciparum reference strain, a chloroquine-resistant reference strain, and three clinical isolates were tested for in vitro susceptibility to tigecycline. A histidine-rich protein in vitro assay was used to evaluate antimalarial activity. Results: The geometric-mean 50% effective concentration (EC50%) of tigecycline was 535.5 nM (confidence interval (CI): 344.3-726.8). No significant correlation was found between the EC50% of tigecycline and that of any other tested antimalarial drug. Conclusions: Tigecycline may represent an alternative drug for the treatment of patients with severe malaria.

Toxoplasmosis: an examination of knowledge among health professionals and pregnant women in a municipality of the State of Paraná

Introduction The aim of this study was to investigate the knowledge of toxoplasmosis among professionals and pregnant women in the public health services in Paraná, Brazil. Methods A cross-sectional observational and transversal study of 80 health professionals (44 nurses and 36 physicians) and 330 pregnant women [111 immunoglobulin M (IgM)- and IgG-non-reactive and 219 IgG-reactive] was conducted in 2010. An epidemiological data questionnaire was administered to the professionals and to the pregnant women, and a questionnaire about the clinical aspects and laboratory diagnosis of toxoplasmosis was administered to the professionals. Results The participants frequently provided correct responses about prophylactic measures. Regarding the clinical and laboratory aspects, the physicians provided more correct responses and discussed toxoplasmosis with the pregnant women. The professionals had difficulty interpreting the avidity test results, and the physicians stated that they referred pregnant women with high-risk pregnancies to a county reference center. Of the professionals, 53 (91.4%) reported that they instructed women during prenatal care, but only 54 (48.6%) at-risk pregnant women and 99 (45.2%) women who were not at risk reported receiving information about preventive measures. The physicians provided verbal instructions to 120 (78.4%) women, although instructional materials were available in the county. The pregnant women generally lacked knowledge about preventive measures for congenital toxoplasmosis, but the at-risk pregnant women tended to respond correctly. Conclusions This study provides data to direct public health policies regarding the importance of updating the knowledge of primary care professionals. Mechanisms should be developed to increase public knowledge because prophylactic strategies are important for preventing congenital toxoplasmosis.

Performance of the Vitek 2 system software version 5.03 in the bacterial identification and antimicrobial susceptibility test: evaluation study of clinical and reference strains of Gram-positive cocci

Introduction. The genera Enterococcus, Staphylococcus and Streptococcus are recognized as important Gram-positive human pathogens. The aim of this study was to evaluate the performance of Vitek 2 in identifying Gram-positive cocci and their antimicrobial susceptibilities. Methods. One hundred four isolates were analyzed to determine the accuracy of the automated system for identifying the bacteria and their susceptibility to oxacillin and vancomycin. Results. The system correctly identified 77.9% and 97.1% of the isolates at the species and genus levels, respectively. Additionally, 81.8% of the Vitek 2 results agreed with the known antimicrobial susceptibility profiles. Conclusion. Vitek 2 correctly identified the commonly isolated strains; however, the limitations of the method may lead to ambiguous findings.

Evaluation of the reference value for the Montenegro skin test

Abstract:INTRODUCTION:The Montenegro skin test (MST) has good clinical applicability and low cost for the diagnosis of American tegumentary leishmaniasis (ATL). However, no studies have validated the reference value (5mm) typically used to discriminate positive and negative results. We investigated MST results and evaluated its performance using different cut-off points.METHODS:The results of laboratory tests for 4,256 patients with suspected ATL were analyzed, and 1,182 individuals were found to fulfill the established criteria. Two groups were formed. The positive cutaneous leishmaniasis (PCL) group included patients with skin lesions and positive direct search for parasites (DS) results. The negative cutaneous leishmaniasis (NCL) group included patients with skin lesions with evolution up to 2 months, negative DS results, and negative indirect immunofluorescence assay results who were residents of urban areas that were reported to be probable sites of infection at domiciles and peridomiciles.RESULTS:The PCL and NCL groups included 769 and 413 individuals, respectively. The mean ± standard deviation MST in the PCL group was 12.62 ± 5.91mm [95% confidence interval (CI): 12.20-13.04], and that in the NCL group was 1.43 ± 2.17mm (95% CI: 1.23-1.63). Receiver-operating characteristic curve analysis indicated 97.4% sensitivity and 93.9% specificity for a cut-off of 5mm and 95.8% sensitivity and 97.1% specificity for a cut-off of 6mm.CONCLUSIONS:Either 5mm or 6mm could be used as the cut-off value for diagnosing ATL, as both values had high sensitivity and specificity.

Cellulose-based composites as functional conductive materials for printed electronics

In this work, cellulose-based electro and ionic conductive composites were developed for application in cellulose based printed electronics. Electroconductive inks were successfully formulated for screen-printing using carbon fibers (CFs) and multi-walled carbon nanotubes (MWCNTs) as conductive functional material and cellulose derivatives working as binder. The formulated inks were used to fabricate conductive flexible and disposable electrodes on paper-based substrates. Interesting results were obtained after 10 printing passes and drying at RT of the ink with 10 % wt. of pristine CFs and 3% wt. of carboxymethyl cellulose (CMC), exhibiting a resistivity of 1.03 Ωcm and a resolution of 400 μm. Also, a resistivity of 0.57 Ωcm was obtained for only one printing pass using an ink based on 0.5 % wt. MWCNTs and 3 % wt. CMC. It was also demonstrated that ionic conductive cellulose matrix hydrogel can be used in electrolyte-gated transistors (EGTs). The electrolytes revealed a double layer capacitance of 12.10 μFcm-2 and ionic conductivity of 3.56x10-7 Scm-1. EGTs with a planar configuration, using sputtered GIZO as semiconducting layer, reached an ON/OFF ratio of 3.47x105, a VON of 0.2 V and a charge carrier mobility of 2.32 cm2V-1s-1.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Historical reconstructions of raw materials based on a blue smalt coating applied to a seventeenth-century altarpiece

Based on samples cross-sections from the Main Altarpiece of the Coimbra Old Cathedral, where a blue coating performed in 1685 is observed (that was partly covered with a Prussian blue-containing overpaint), the raw materials present in this coating were reproduced and studied. Blue areas were painted with smalt in oil, according to the contract signed by Manoel da Costa Pereira in 1684 and the analysis by Le Gac in 2009. Based on these, three batches of cobalt-based glasses (S1, S2 and S3) were heated and melted in alumina crucibles in the kiln. S1 contained 6.03 % of cobalt oxide, S2 contained 2.10 %, with the addition of 1.49 % of magnesium oxide, and S3 contained 6.82 % of cobalt oxide, with the addition of 4.63% of antimony trioxide. These batches were ground mechanically with water and manually with different vehicles stated in recipes. The results were studied by means of OM, SEM-EDS, X-Ray CT, Colorimetry and Vickers HT. Different binders were also produced and analyzed by means of μ-FTIR, in order to perform their characterization and obtain Standard Spectra. Since anhydrite was identified in the ground layers, gypsum from Óbidos was also characterized by XRD. The main goal of this thesis was to study all the raw materials present in the 1685-blue coating, in order to allow the historically accurate reconstruction of the layers build-up in the next future.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

Dangote Cement Plc building materials

Equity research report

Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).