Modelling of a symmetric molten carbonate fuel cell stack

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2011

Non-linear model reduction and control of molten carbonate fuel cell systems with internal reforming fuel cell systems with internal reforming

Magdeburg, Univ., Diss, 2007

Estudos químico-agrícolas sôbre o enxofre

1. Analyses of soluble sulphates in 2 N ammonium chloride extracts of 24 samples of soils of the state of São Paulo, Brazil, S. A., showed a sulphur content varying from 0,0013 g per 100 g (found in the b layer of a genuine "terra roxa") to 0,007 g per 100 g of soil (b layer of a soil of depression without definite characteristics). (The results are expressed as elemental sulphur). Determinations of total sulphur in 56 samples of soils of the same state using the method of fusion with sodium carbonate and sodium nitrate revealed 0.007 g of elemental S per 100 g of soil as the lowest value (found in several soil types) and 0.096 g as the highest one (found in the b layer of an ar-quean soil). Apparently soluble sulphates accumulate in the upper layers and total sulphur does the opposite. It was found a strong correlation between total S and carbon content. 2. Under laboratory conditions, in a compost of fresh soil, powdered sulphur and apatite, it was verified after a three months period of incubation that the pH value lowered from 6.30 to 3.23; the citric acid solubility of apatite increased to 271.1 per cent of the original one. Lupinus sp. grown in soil manured with sulphur and apatite has showed fresh and dry weights higher than the plants in control pots; the results are significant at 5% level of probability; phosphorus content is also higher in the manured plants. It was observed a net influence of the apatite plus sulphur treatment on the weight of root nodosities that was four times greater than in the control plants. 3. Nearly five hundred determinations of S, N and P were carried out in 35 species of plants cultivated in the state of São Paulo. A great variation in the amounts of these elements was observed. As a general rule, the leaves contain more sulphur than the stems and roots show the lowest percentages. The conjunct roots and stem of guar (Cyamopsis psoraloides) revealed only 0.019 per cent sulphur; the leaves of kale showed the highest sulphur content, i. e., 2.114%. Apparently there is no correlation between the amounts of S, N and P. The ratio S/N increases from 0.006 (guar) to 0.485 (kale). The ratio S/P, always higher than the corresponding S/N, increases from 0.082 (guar) to 6.381 (older leaves of tomato plants). It is interesting to mention that several among the most important crops in the state of São Paulo namely, cotton, rice, coffee and sugar cane contain more sulphur than phosphorus. 4. Tomato plants cultivated in nutrient solution lacking sulphur showed the following visual symptons of deficiency : chlorosis first in the younger leaves and afterwards in all the leaves; anthocyanin pigments in the petioles and stems; absence of fruits; primary roots stunted and secondary ones longer than in the control plants; stems slender, hard, woody. The histological study of petioles suffering from sulphur deficiency revealed anthocyanin in the parenchyme layer instead of clo-rophyll pigments observed in normal petioles; in the chlorotic leaves the large chloroplasts present only the stroma but the small ones have a little amount of green pigments. Chemical analysis revealed in the abnormal plants : less sulphur and an increased proportion of phosphorus; older leaves contain more sulphur and less phosphorus than the younger ones probably due to physiological difficulties in translocation of sulphur bearing material; increased amount of total N attributed to accumulation of nitrates; marked decrease in ash, sugars and starch; increased proportion of crude fiber and dry material. In the plants suffering from sulphur deficiency photosyntetic rate decreased 34 per cent. 5. Tomato plants were succesfully cultivated in nutrient solution in absence of mineral sulphur but in presence of cysteine. The plants absorbed sulphur, under that form and were able to grow up quite well; the fruiting was normal. In this way rested cleary demonstrated the possibility of absorption of organic sulphur without previous mineralization and its utilization in the building up of protein molecules.

Sobre o preparo dos parasitas da malária em distensões espessas, especialmente em amostras supersecas

I) the A. presents a method developed for the preparation of thick blood films, specially old desiccated smears. The observations are based on the experience of more than 53000 blood samples collected in the laboratory of the “Serviço de Malaria do Nordeste” as well as in the research department of the “Serviço de Malaria da Baixada Fluminenese”. II) As in introductory matter, he emphasizes the value of the obstacles presented by overdrying of the thick blood films occurring systematically in great malaria control organizations in which the laboratory receives materials from more or less remote localities, particularly in the Brazilian northeast, in regions invaded by Anopheles gambiae. III) An analysis of the causes of failure of the methods of Chorine and Knowles recorded in the literature for such purposes is given, as well as its adaptability for the simultaneous preparation of large numbers of samples. IV) The method is based the protective action of a previous fixation by a dilute solution of formalin, which, without preventing further dehemoglobinization, prevents morphological alterations in the parasites by the action of Knowles solution which is retained in this metod without modification. V) For washing out the acids of the dehemoglobinizating solution as well as for diluting the Giemsa stain, the A. proposes a very simple technique, extremely convenient for such purpose, which consists in adding acetic acid to the distilled water in the proportion of 1 drop for each 10cc of water, and then increasing the hydrogeni-on concentration to pH 7.2 with a 2% sol. of sodium carbonate. As indicator a 0.02% solution purple-bromcresol prepared in accordante to Medalia, is used. In this reaction there is the formation of the acetic acid ↔ sodium acetate, buffer system very suitable for giving a convenient pH and for preventing the precipitation of the dye, which can be used for two or three batches of 700 or 800 slides each, without changing the staining solution. VI) – The method can be summarized as follow: For a small number of samples, Coplin’s or any other staining jar can be used. Large number of slides must be placed in groups of 10 or 15 units each, the slides being separated by a piece of cardboard, according to Barber & Komp. A) Fix in dilute formalin (2%), during 5 minutes. b) Without washing, put in Knowles solution (see the formula in the text), no more than 20 minutes. c)Two successive washings in distilled water, buffered as explained above (which can be used several times). d) Dry and stain with Giemsa solution, prepared by using 1 drop of the stain for each c. c. of buffered distilled water. Time: 1 hour. E) Was in distilled water and dry.

Fungi, bacteria and soil pH: the oxalate-carbonate pathway as a model for metabolic interaction

The oxalatecarbonate pathway involves the oxidation of calcium oxalate to low-magnesium calcite and represents a potential long-term terrestrial sink for atmospheric CO2. In this pathway, bacterial oxalate degradation is associated with a strong local alkalinization and subsequent carbonate precipitation. In order to test whether this process occurs in soil, the role of bacteria, fungi and calcium oxalate amendments was studied using microcosms. In a model system with sterile soil amended with laboratory cultures of oxalotrophic bacteria and fungi, the addition of calcium oxalate induced a distinct pH shift and led to the final precipitation of calcite. However, the simultaneous presence of bacteria and fungi was essential to drive this pH shift. Growth of both oxalotrophic bacteria and fungi was confirmed by qPCR on the frc (oxalotrophic bacteria) and 16S rRNA genes, and the quantification of ergosterol (active fungal biomass) respectively. The experiment was replicated in microcosms with non-sterilized soil. In this case, the bacterial and fungal contribution to oxalate degradation was evaluated by treatments with specific biocides (cycloheximide and bronopol). Results showed that the autochthonous microflora oxidized calcium oxalate and induced a significant soil alkalinization. Moreover, data confirmed the results from the model soil showing that bacteria are essentially responsible for the pH shift, but require the presence of fungi for their oxalotrophic activity. The combined results highlight that the interaction between bacteria and fungi is essential to drive metabolic processes in complex environments such as soil.

Marbles and carbonate rocks from central Morocco: a petrographic, mineralogical and geochemical study

Petrographic, mineralogical, and stable isotopes (delta C-13, delta O-18 values) compositions were used to characterise marbles and sedimentary carbonate rocks from central Morocco, which are considered to be a likely source of ornamental and building material from Roman time to the present day. This new data set was used in the frame of an archaeometric provenance study on Roman artefacts from the town of Thamusida (Kenitra, north Morocco), to assess the potential employment of these rocks for the manufacture of the archaeological materials. A representative set of samples from marbles and other carbonate rocks (limestone, dolostone) were collected in several quarries and outcrops in the Moroccan Meseta, in a region extending from the Meknes-Khenifra alignment to the Atlantic Ocean. All the samples were studied using a petrographic, mineralogical and geochemical methods. The petrographic and minerological investigations (optical microscopy, electron microscopy, X-ray diffraction) allowed to group the carbonate rocks in limestones, foliated limestone, diagenetic breccias and dolostone. The limestones could be further grouped as mudstones, wackestones-packstones, crinoid grainstones, oolitic grainstone and floatstones. Textural differences allowed to define marbles varieties. The stable carbon and oxygen isotope composition proved to be quite useful in the discrimination of marble sources, with apparently less discriminatory potential for carbonate rocks.

Geochemistry of highly acidic mine water following disposal into a natural lake with carbonate bedrock

Acid mine drainage (AMD) from the Zn-Pb(-Ag-Bi-Cu) deposit of Cerro de Pasco (Central Peru) and waste water from a Cu-extraction plant has been discharged since 1981 into Lake Yanamate, a natural lake with carbonate bedrock. The lake has developed a highly acidic pH of similar to 1. Mean lake water chemistry was characterized by 16,775 mg/L acidity as CaCO(3), 4330 mg/L Fe and 29,250 mg/L SO(4). Mean trace element concentrations were 86.8 mg/L Cu, 493 mg/L Zn, 2.9 mg/L Pb and 48 mg/L As, which did not differ greatly from the discharged AMD. Most elements showed increasing concentrations from the surface to the lake bottom at a maximal depth of 41 m (e.g. from 3581 to 5433 mg/L Fe and 25,609 to 35,959 mg/L SO(4)). The variations in the H and 0 isotope compositions and the element concentrations within the upper 10 m of the water column suggest mixing with recently discharged AMD, shallow groundwater and precipitation waters. Below 15 m a stagnant zone had developed. Gypsum (saturation index, SI similar to 0.25) and anglesite (SI similar to 0.1) were in equilibrium with lake water. Jarosite was oversaturated (SI similar to 1.7) in the upper part of the water column, resulting in downward settling and re-dissolution in the lower part of the water column (SI similar to -0.7). Accordingly, jarosite was only found in sediments from less than 7 m water depth. At the lake bottom, a layer of gel-like material (similar to 90 wt.% water) of pH similar to 1 with a total organic C content of up to 4.40 wet wt.% originated from the kerosene discharge of the Cu-extraction plant and had contaminant element concentrations similar to the lake water. Below the organic layer followed a layer of gypsum with pH 1.5, which overlaid the dissolving carbonate sediments of pH 5.3-7. In these two layers the contaminant elements were enriched compared to lake water in the sequence As < Pb approximate to Cu < Cd < Zn = Mn with increasing depth. This sequence of enrichment was explained by the following processes: (i) adsorption of As on Fe-hydroxides coating plant roots at low pH (up to 3326 mg/kg As), (ii) adsorption at increasing pH near the gypsum/calcite boundary (up to 1812 mg/kg Pb, 2531 mg/kg Cu. and 36 mg/kg Cd), and (iii) precipitation of carbonates (up to 5177 mg/kg Zn and 810 mg/kg Mn: all data corrected to a wet base). The infiltration rate was approximately equal to the discharge rate, thus gypsum and hydroxide precipitation had not resulted in complete clogging of the lake bedrocks. (C) 2010 Elsevier Ltd. All rights reserved.

Purification and activity standardisation of a (166m)Ho solution.

As part of a project to use the long-lived (T(1/2)=1200a) (166m)Ho as reference source in its reference ionisation chamber, IRA standardised a commercially acquired solution of this nuclide using the 4pibeta-gamma coincidence and 4pigamma (NaI) methods. The (166m)Ho solution supplied by Isotope Product Laboratories was measured to have about 5% Europium impurities (3% (154)Eu, 0.94% (152)Eu and 0.9% (155)Eu). Holmium had therefore to be separated from europium, and this was carried out by means of ion-exchange chromatography. The holmium fractions were collected without europium contamination: 162h long HPGe gamma measurements indicated no europium impurity (detection limits of 0.01% for (152)Eu and (154)Eu, and 0.03% for (155)Eu). The primary measurement of the purified (166m)Ho solution with the 4pi (PC) beta-gamma coincidence technique was carried out at three gamma energy settings: a window around the 184.4keV peak and gamma thresholds at 121.8 and 637.3keV. The results show very good self-consistency, and the activity concentration of the solution was evaluated to be 45.640+/-0.098kBq/g (0.21% with k=1). The activity concentration of this solution was also measured by integral counting with a well-type 5''x5'' NaI(Tl) detector and efficiencies computed by Monte Carlo simulations using the GEANT code. These measurements were mutually consistent, while the resulting weighted average of the 4pi NaI(Tl) method was found to agree within 0.15% with the result of the 4pibeta-gamma coincidence technique. An ampoule of this solution and the measured value of the concentration were submitted to the BIPM as a contribution to the Système International de Référence.

A Modulated Closed Form solution for Quantitative Susceptibility Mapping - A thorough evaluation and comparison to iterative methods based on edge prior knowledge.

The aim of this study is to perform a thorough comparison of quantitative susceptibility mapping (QSM) techniques and their dependence on the assumptions made. The compared methodologies were: two iterative single orientation methodologies minimizing the l2, l1TV norm of the prior knowledge of the edges of the object, one over-determined multiple orientation method (COSMOS) and anewly proposed modulated closed-form solution (MCF). The performance of these methods was compared using a numerical phantom and in-vivo high resolution (0.65mm isotropic) brain data acquired at 7T using a new coil combination method. For all QSM methods, the relevant regularization and prior-knowledge parameters were systematically changed in order to evaluate the optimal reconstruction in the presence and absence of a ground truth. Additionally, the QSM contrast was compared to conventional gradient recalled echo (GRE) magnitude and R2* maps obtained from the same dataset. The QSM reconstruction results of the single orientation methods show comparable performance. The MCF method has the highest correlation (corrMCF=0.95, r(2)MCF =0.97) with the state of the art method (COSMOS) with additional advantage of extreme fast computation time. The l-curve method gave the visually most satisfactory balance between reduction of streaking artifacts and over-regularization with the latter being overemphasized when the using the COSMOS susceptibility maps as ground-truth. R2* and susceptibility maps, when calculated from the same datasets, although based on distinct features of the data, have a comparable ability to distinguish deep gray matter structures.

Prévenir la prise de poids à l'arrêt du tabac: pas de solution miracle: revue Cochrane pour le praticien. [Preventing weight gain in smoking cessation: there is no miracle solution]

http://resfranco.cochrane.org/sites/resfranco.cochrane.org/files/uploads/Arrettabac2009.pdf

Existence and uniqueness of viscosity solution for Hamilton-Jacobi equation with discontinuous coefficients dependent on time

The main result is a proof of the existence of a unique viscosity solution for Hamilton-Jacobi equation, where the hamiltonian is discontinuous with respect to variable, usually interpreted as the spatial one. Obtained generalized solution is continuous, but not necessarily differentiable.

An approximate solution method for boundary layer flow of a power law fluid over a flat plate

The work in this paper deals with the development of momentum and thermal boundary layers when a power law fluid flows over a flat plate. At the plate we impose either constant temperature, constant flux or a Newton cooling condition. The problem is analysed using similarity solutions, integral momentum and energy equations and an approximation technique which is a form of the Heat Balance Integral Method. The fluid properties are assumed to be independent of temperature, hence the momentum equation uncouples from the thermal problem. We first derive the similarity equations for the velocity and present exact solutions for the case where the power law index n = 2. The similarity solutions are used to validate the new approximation method. This new technique is then applied to the thermal boundary layer, where a similarity solution can only be obtained for the case n = 1.