Model of Big Data Failure: Review of Information System Failure

In the new age of information technology, big data has grown to be the prominent phenomena. As information technology evolves, organizations have begun to adopt big data and apply it as a tool throughout their decision-making processes. Research on big data has grown in the past years however mainly from a technical stance and there is a void in business related cases. This thesis fills the gap in the research by addressing big data challenges and failure cases. The Technology-Organization-Environment framework was applied to carry out a literature review on trends in Business Intelligence and Knowledge management information system failures. A review of extant literature was carried out using a collection of leading information system journals. Academic papers and articles on big data, Business Intelligence, Decision Support Systems, and Knowledge Management systems were studied from both failure and success aspects in order to build a model for big data failure. I continue and delineate the contribution of the Information System failure literature as it is the principal dynamics behind technology-organization-environment framework. The gathered literature was then categorised and a failure model was developed from the identified critical failure points. The failure constructs were further categorized, defined, and tabulated into a contextual diagram. The developed model and table were designed to act as comprehensive starting point and as general guidance for academics, CIOs or other system stakeholders to facilitate decision-making in big data adoption process by measuring the effect of technological, organizational, and environmental variables with perceived benefits, dissatisfaction and discontinued use.

How Is Credit Risk Estimated? Discussion and Evidence based on Cross-Industry Sample Utilizing the KMV Model

The purpose of this thesis is to focus on credit risk estimation. Different credit risk estimation methods and characteristics of credit risk are discussed. The study is twofold, including an interview of a credit risk specialist and a quantitative section. Quantitative section applies the KMV model to estimate credit risk of 12 sample companies from three different industries: automobile, banking and financial sector and technology. Timeframe of the estimation is one year. On the basis of the KMV model and the interview, implications for analysis of credit risk are discussed. The KMV model yields consistent results with the existing credit ratings. However, banking and financial sector requires calibration of the model due to high leverage of the industry. Credit risk is considerably driven by leverage, value and volatility of assets. Credit risk models produce useful information on credit worthiness of a business. Yet, quantitative models often require qualitative support in the decision-making situation.

Model of Big Data Failure: Review of Information System Failure

In the new age of information technology, big data has grown to be the prominent phenomena. As information technology evolves, organizations have begun to adopt big data and apply it as a tool throughout their decision-making processes. Research on big data has grown in the past years however mainly from a technical stance and there is a void in business related cases. This thesis fills the gap in the research by addressing big data challenges and failure cases. The Technology-Organization-Environment framework was applied to carry out a literature review on trends in Business Intelligence and Knowledge management information system failures. A review of extant literature was carried out using a collection of leading information system journals. Academic papers and articles on big data, Business Intelligence, Decision Support Systems, and Knowledge Management systems were studied from both failure and success aspects in order to build a model for big data failure. I continue and delineate the contribution of the Information System failure literature as it is the principal dynamics behind technology-organization-environment framework. The gathered literature was then categorised and a failure model was developed from the identified critical failure points. The failure constructs were further categorized, defined, and tabulated into a contextual diagram. The developed model and table were designed to act as comprehensive starting point and as general guidance for academics, CIOs or other system stakeholders to facilitate decision-making in big data adoption process by measuring the effect of technological, organizational, and environmental variables with perceived benefits, dissatisfaction and discontinued use.

Linguistic skills and trust creation in international business relationships

Today’s international business in highly related to crossing national, cultural and linguistic borders making communication and linguistic skills a vital part of the trade. The purpose of the study is to understand the role of linguistic skills in trust creation in international business relationships. Subobjectives are to discuss the importance of linguistic skills in international business context, to evaluate the strategic value of trust in business relationships and to analyze the extent to which linguistic skills affect trust formation. The scope is restricted to business-to-business markets. The theoretical background consists of different theories and previous studies related to trust and linguistic skills. Based on the theory a new LTS-framework is created to demonstrate a process model of linguistic skills affecting trust creation in international B2B relationships. This study is qualitative using interviews as a data collection method. Altogether eleven interviews were conducted between October 2014 and February 2015. All of the interviewees worked for organizations operating in the field of international business in B2B markets, spoke multiple languages and had a lot of experience in sales and negotiations. This study confirms that linguistic skills are an important part of international business. In many organizations English is used as lingua franca. However, there are several benefits of speaking the mother tongue of the customer. It makes people feel more relaxed and it makes the relationship more intimate and allows to continue developing it at a more personal level. From the strategic point of view trust creates competitive advantage to a company adding strategic value to the business. The data also supported the view that linguistic skills definitely impact the trust formation process. Quickness and easiness could be stated as the main benefits. It was seen that trust forms faster because both parties understand each other better and they become more open about information sharing within a shorter period of time. These findings and the importance of linguistic skills in trust creation should be acknowledged by organizations, especially regarding the human resource management. Boundary spanners are in key positions so special attention should be put into hiring and educating employees which then take care of company’s relationships. Eventually, these benefits are economical and affect to the profitability of the organization

A Business Incubator, Accelerator, or Coworking Space? Case Health Innovation Village at GE

Health Innovation Village at GE is one of the new communities targeted for startup and growth-oriented companies. It has been established at the premises of a multinational conglomerate that will promote networking and growth of startup companies. The concept combines features from traditional business incubators, accelerators, and coworking spaces. This research compares Health Innovation Village to these concepts regarding its goals, target clients, source of income, organization, facilities, management, and success factors. In addition, a new incubator classification model is introduced. On the other hand, Health Innovation Village is examined from its tenants’ perspective and improvements are suggested. The work was implemented as a qualitative case study by interviewing GE staff with connections to Health Innovation Village as well as startup entrepreneurs and employees’ working there. The most evident features of Health Innovation Village correspond to those of business incubators although it is atypical as a non-profit corporate business incubator. Strong network orientation and connections to venture capitalists are common characteristics of these new types of accelerators. The design of the premises conforms to the principles of coworking spaces, but the services provided to the startup companies are considerably more versatile than the services offered by coworking spaces. The advantages of Health Innovation Village are that there are first-class premises and exceptionally good networking possibilities that other types of incubators or accelerators are not able to offer. A conglomerate can also provide multifaceted special knowledge for young firms. In addition, both GE and the startups gained considerable publicity through their cooperation, indeed a characteristic that benefits both parties. Most of the expectations of the entrepreneurs were exceeded. However, communication and the scope of cooperation remain challenges. Micro companies spend their time developing and marketing their products and acquiring financing. Therefore, communication should be as clear as possible and accessible everywhere. The startups would prefer to cooperate significantly more, but few have the time available to assume the responsibility of leadership. The entrepreneurs also expected to have more possibilities for cooperation with GE. Wider collaboration might be accomplished by curation in the same way as it is used in the well-functioning coworking spaces where curators take care of practicalities and promote cooperation. Communication issues could be alleviated if the community had its own Intranet pages where all information could be concentrated. In particular, a common calendar and a room reservation system could be useful. In addition, it could be beneficial to have a section of the Intranet open for both the GE staff and the startups so that those willing to share their knowledge and those having project offers could use it for advertising.

Developing cost of poor quality calculations with emphasis on business impact

The main aim of this research was to develop cost of poor quality calculation model which will better reflect business impacts of lost productivity caused by IT incidents for the case company. This objective was pursued by reviewing literature and conducting a study in a Finnish multinational manufacturing company. Broad analysis of the scientific literature allowed to identify main theories and models of Cost of Poor Quality and provided better base for development of measurements of business impacts of lost productivity. Empirical data was gathered with semi-structured interviews and internet based survey. In total, twelve interviews with experts and 39 survey results from business stakeholders were gathered. Main results of empirical study helped to develop the measurement model of cost of poor quality and it was tied to incident priority matrix. Nevertheless, the model was created based on available data. Main conclusions of the thesis were that cost of poor quality measurements could be even further improved if additional data points could be used. New model takes into consideration different cost regions and utilizes on this notion.

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

Project Business: a quasi-experimental study of co- operative interaction between schools and industry

This project is a quasi-experimental study involving eight classrooms in two senior elementary schools in St. Catharines, Ontario which received a Project Business Program and were pre- and post-tested to determine the growth of knowledge acquisition in the area of business concepts. Four classrooms received a Project Business treatment while four classrooms acted as a control. The Project Business Program is sponsored by Junior Achievement of Canada; it occurred during a twelveweek period, February to May 1981, and is run by business consultants who, through Action, Dialogue and Career Exploration, teach children about economics and business related topics. The consultants were matched with teacher co-ordinators in whose classrooms they taught and with whom they discussed field trips, students, lesson planning, etc. The statistical analysis of pre- and post-test means revealed a significant statistical growth in the area of knowledge acquisition on the part of those students who received the Project Business Program. This confirms that Project Business makes a difference. A search of the literature appears to advocate economic programs like Project Business, whfch are broadly based, relevant and processoriented. This program recommends itself as a model for other areas of co-operative curricular interactions and as a bridge to future trends and as a result several fruitful areas of research are suggested.

Using a Bayesian model for bankruptcy prediction : a comparative approach

The purpose of this study is to examine the impact of the choice of cut-off points, sampling procedures, and the business cycle on the accuracy of bankruptcy prediction models. Misclassification can result in erroneous predictions leading to prohibitive costs to firms, investors and the economy. To test the impact of the choice of cut-off points and sampling procedures, three bankruptcy prediction models are assessed- Bayesian, Hazard and Mixed Logit. A salient feature of the study is that the analysis includes both parametric and nonparametric bankruptcy prediction models. A sample of firms from Lynn M. LoPucki Bankruptcy Research Database in the U. S. was used to evaluate the relative performance of the three models. The choice of a cut-off point and sampling procedures were found to affect the rankings of the various models. In general, the results indicate that the empirical cut-off point estimated from the training sample resulted in the lowest misclassification costs for all three models. Although the Hazard and Mixed Logit models resulted in lower costs of misclassification in the randomly selected samples, the Mixed Logit model did not perform as well across varying business-cycles. In general, the Hazard model has the highest predictive power. However, the higher predictive power of the Bayesian model, when the ratio of the cost of Type I errors to the cost of Type II errors is high, is relatively consistent across all sampling methods. Such an advantage of the Bayesian model may make it more attractive in the current economic environment. This study extends recent research comparing the performance of bankruptcy prediction models by identifying under what conditions a model performs better. It also allays a range of user groups, including auditors, shareholders, employees, suppliers, rating agencies, and creditors' concerns with respect to assessing failure risk.

The Exchange Rate in a Dynamic-Optimizing Current Account Model with Nominal Rigidities: a Quantitative Investigation.

This paper studies a dynamic-optimizing model of a semi-small open economy with sticky nominal prices and wages. the model exhibits exchange rate overshooting in response to money supply shocks. the predicted variability of nominal and real exchange rates is roughly consistent with that of G7 effective exchange rates during the post-Bretton Woods era.

MQFD: A Model for Synergizing TPM and QFD

This thesis presents the methodology of linking Total Productive Maintenance (TPM) and Quality Function Deployment (QFD). The Synergic power ofTPM and QFD led to the formation of a new maintenance model named Maintenance Quality Function Deployment (MQFD). This model was found so powerful that, it could overcome the drawbacks of TPM, by taking care of customer voices. Those voices of customers are used to develop the house of quality. The outputs of house of quality, which are in the form of technical languages, are submitted to the top management for making strategic decisions. The technical languages, which are concerned with enhancing maintenance quality, are strategically directed by the top management towards their adoption of eight TPM pillars. The TPM characteristics developed through the development of eight pillars are fed into the production system, where their implementation is focused towards increasing the values of the maintenance quality parameters, namely overall equipment efficiency (GEE), mean time between failures (MTBF), mean time to repair (MTIR), performance quality, availability and mean down time (MDT). The outputs from production system are required to be reflected in the form of business values namely improved maintenance quality, increased profit, upgraded core competence, and enhanced goodwill. A unique feature of the MQFD model is that it is not necessary to change or dismantle the existing process ofdeveloping house ofquality and TPM projects, which may already be under practice in the company concerned. Thus, the MQFD model enables the tactical marriage between QFD and TPM.First, the literature was reviewed. The results of this review indicated that no activities had so far been reported on integrating QFD in TPM and vice versa. During the second phase, a survey was conducted in six companies in which TPM had been implemented. The objective of this survey was to locate any traces of QFD implementation in TPM programme being implemented in these companies. This survey results indicated that no effort on integrating QFD in TPM had been made in these companies. After completing these two phases of activities, the MQFD model was designed. The details of this work are presented in this research work. Followed by this, the explorative studies on implementing this MQFD model in real time environments were conducted. In addition to that, an empirical study was carried out to examine the receptivity of MQFD model among the practitioners and multifarious organizational cultures. Finally, a sensitivity analysis was conducted to find the hierarchy of various factors influencing MQFD in a company. Throughout the research work, the theory and practice of MQFD were juxtaposed by presenting and publishing papers among scholarly communities and conducting case studies in real time scenario.

A model of Distributed Ayurvedic Diagnosis and Therapy System for Hridroga Using Agents

Diagnosis of Hridroga (cardiac disorders) in Ayurveda requires the combination of many different types of data, including personal details, patient symptoms, patient histories, general examination results, Ashtavidha pareeksha results etc. Computer-assisted decision support systems must be able to combine these data types into a seamless system. Intelligent agents, an approach that has been used chiefly in business applications, is used in medical diagnosis in this case. This paper is about a multi-agent system named “Distributed Ayurvedic Diagnosis and Therapy System for Hridroga using Agents” (DADTSHUA). It describes the architecture of the DADTSHUA model .This system is using mobile agents and ontology for passing data through the network. Due to this, transport delay can be minimized. It is a system which will be very helpful for the beginning physicians to eliminate his ambiguity in diagnosis and therapy. The system is implemented using Java Agent DEvelopment framework (JADE), which is a java-complaint mobile agent platform from TILab.

Operational Flexibility: A Model for Effective Project Management

The aim of this study is to investigate the role of operational flexibility for effective project management in the construction industry. The specific objectives are to: a) Identify the determinants of operational flexibility potential in construction project management b) Investigate the contribution of each of the determinants to operational flexibility potential in the construction industry c) Investigate on the moderating factors of operational flexibility potential in a construction project environment d) Investigate whether moderated operational flexibility potential mediates the path between predictors and effective construction project management e) Develop and test a conceptual model of achieving operational flexibility for effective project management The purpose of this study is to findout ways to utilize flexibility inorder to manage uncertain project environment and ultimately achieve effective project management. In what configuration these operational flexibility determinants are demanded by construction project environment in order to achieve project success. This research was conducted in three phases, namely: (i) exploratory phase (ii) questionnaire development phase; and (iii) data collection and analysis phase. The study needs firm level analysis and therefore real estate developers who are members of CREDAI, Kerala Chapter were considered. This study provides a framework on the functioning of operational flexibility, offering guidance to researchers and practitioners for discovering means to gain operational flexibility in construction firms. The findings provide an empirical understanding on kinds of resources and capabilities a construction firm must accumulate to respond flexibly to the changing project environment offering practitioners insights into practices that build firms operational flexibility potential. Firms are dealing with complex, continuous changing and uncertain environments due trends of globalization, technical changes and innovations and changes in the customers’ needs and expectations. To cope with the increasingly uncertain and quickly changing environment firms strive for flexibility. To achieve the level of flexibility that adds value to the customers, firms should look to flexibility from a day to day operational perspective. Each dimension of operational flexibility is derived from competences and capabilities. In this thesis only the influence on customer satisfaction and learning exploitation of flexibility dimensions which directly add value in the customers eyes are studied to answer the followingresearch questions: “What is the impact of operational flexibility on customer satisfaction?.” What are the predictors of operational flexibility in construction industry? .These questions can only be answered after answering the questions like “Why do firms need operational flexibility?” and “how can firms achieve operational flexibility?” in the context of the construction industry. The need for construction firms to be flexible, via the effective utilization of organizational resources and capabilities for improved responsiveness, is important because of the increasing rate of changes in the business environment within which they operate. Achieving operational flexibility is also important because it has a significant correlation with a project effectiveness and hence a firm’s turnover. It is essential for academics and practitioners to recognize that the attainment of operational flexibility involves different types namely: (i) Modification (ii) new product development and (iii) demand management requires different configurations of predictors (i.e., resources, capabilities and strategies). Construction firms should consider these relationships and implement appropriate management practices for developing and configuring the right kind of resources, capabilities and strategies towards achieving different operational flexibility types.

Chancen und Risiken der Arbeit im E-Business

E-Business, verstanden als ganzheitliche Strategie zur Reorganisation von Geschäftsprozessen, Strukturen und Beziehungen in Unternehmen, bietet für die Arbeitsgestaltung in einer digital vernetzten Welt Chancen und Risiken in Hinblick auf die Humankriterien. Empirische Untersuchungen in 14 Unternehmen zeigen „good practice“-Ansätze im B2B-Feld (Business-to-Business). Untersucht wurden die Tätigkeiten der elektronisch vernetzten Auftragsbearbeitung, des Web-, Content-Managements, der digitalen Druckvorlagenherstellung sowie der CAD- Bauplanzeichnung. Die beobachteten Arbeitsplätze zeigen, dass Arbeitsinhalte eher ganzheitlich und komplex gestaltet sind. Planende, ausführende, kontrollierende und organisierende Anteile weisen auf eine vielfältige Aufgabengestaltung hin, die hohe Anforderungen beinhaltet. Während alle beobachteten Tätigkeiten mit Aufnahme-, Erarbeitungs-, Verarbeitungs-, Übertragungs- und Weitergabeprozessen von Informationen zu tun haben, gibt es Differenzen in Bezug auf den Arbeitsumfang, den Zeitdruck, Fristsetzungen, erwartete Arbeitsleistungen sowie die Planbarkeit der Aufgaben. Die vorgefundenen Aufgabentypen (wenig bis sehr anforderungsreich im Sinne von Denk- und Planungsanforderungen) sind gekennzeichnet durch eine unterschiedlich ausgeprägte Aufgabenkomplexität. Interessant ist, dass, je anforderungsreicher die Aufgabengestaltung, je höher die Aufgabenkomplexität, je größer die Wissensintensität und je niedriger die Planbarkeit ist, desto größer sind die Freiräume in der Aufgabenausführung. Das heißt wiederum, dass bei zunehmenden E-Business-Anteilen mehr Gestaltungsspielräume zur Verfügung stehen. Die bestehenden Chancen auf eine humane Aufgabengestaltung sind umso größer, je höher die E-Business-Anteile in der Arbeit sind. Diese Wirkung findet sich auch bei einem Vergleich der Aufgabenbestandteile wieder. Die negativen Seiten des E-Business zeigen sich in den vorgefundenen Belastungen, die auf die Beschäftigten einwirken. Diskutiert wird die Verschiebung von körperlichen hin zu psychischen und vorrangig informatorischen Belastungen. Letztere stellen ein neues Belastungsfeld dar. Ressourcen, auf welche die Mitarbeiter zurückgreifen können, sind an allen Arbeitsplätzen vorhanden, allerdings unterschiedlich stark ausgeprägt. Personale, organisationale, soziale, aufgabenbezogene und informatorische Ressourcen, die den Beschäftigten zur Verfügung stehen, werden angesprochen. In Bezug auf die Organisationsgestaltung sind positive Ansätze in den untersuchten E-Business-Unternehmen zu beobachten. Der Großteil der untersuchten Betriebe hat neue Arbeitsorganisationskonzepte realisiert, wie die vorgefundenen kooperativen Organisationselemente zeigen. Die kooperativen Organisationsformen gehen allerdings nicht mit einer belastungsärmeren Gestaltung einher. Das vorgefundene breite Spektrum, von hierarchisch organisierten Strukturen bis hin zu prozess- und mitarbeiterorientierten Organisationsstrukturen, zeigt, dass Organisationsmodelle im E-Business gestaltbar sind. Neuen Anforderungen kann insofern gestaltend begegnet und somit die Gesundheit und das Wohlbefinden der Mitarbeiter positiv beeinflusst werden. Insgesamt betrachtet, zeigt E-Business ein ambivalentes Gesicht, das auf der Basis des MTO-Modells (Mensch-Technik-Organisation) von Uhlich (1994) diskutiert wird, indem vernetzte Arbeitsprozesse auf personeller, technischer sowie organisationaler Ebene betrachtet werden. E-business, seen as more than only the transformation of usual business processes into digital ones, furthermore as an instrument of reorganisation of processes and organisation structures within companies, offers chances for a human oriented work organisation. Empirical data of 14 case studies provide good practice approaches in the field of B2B (Business-to-Business). The observed work contents show, that tasks (e.g. order processing, web-, contentmanagement, first print manufacturing and architectural drawing) are well arranged. Executive, organising, controlling and coordinating parts constitute a diversified work content, which can be organised with high demands. Interesting is the result, that the more e-business-parts are within the work contents, on the one hand the higher are the demands of the type of work and on the other hand the larger is the influence on workmanship. The observed enterprises have realised new elements of work organisation, e.g. flexible working time, cooperative leadership or team work. The direct participation of the employees can be strengthened, in particular within the transformation process. Those companies in which the employees were early and well informed about the changes coming up with e-business work, the acceptance for new technique and new processes is higher than in companies which did not involve the person concerned. Structured in an ergonomic way, there were found bad patterns of behaviour concerning ergonomic aspects, because of missing knowledge regarding work-related ergonomic expertise by the employees. E-business indicates new aspects concerning requirements – new in the field of informational demands, as a result of poorly conceived technical balance in the researched SME. Broken systems cause interruptions, which increase the pressure of time all the more. Because of the inadequate usability of software-systems there appear in addition to the informational strains also elements of psychological stress. All in all, work contents and work conditions can be shaped and as a result the health and well-being of e-business-employees can be influenced: Tasks can be structured and organised in a healthfulness way, physiological strain and psychological stress are capable of being influenced, resources are existent and developable, a human work design within e-business structures is possible. The ambivalent face of e-business work is discussed on the basis of the MTO- (Mensch-Technik-Organisation) model (Ulich 1994). Thereby new and interesting results of researches are found out, concerning the personal/human side, the technical side and the organisational side of e-business work.

Enterprise Modelling Approach based on Maturity and Business Scope perspectives

This paper introduces a framework that supports users to implement enterprise modelling within collaborative companies. These enterprise models are the basis for a holistic interoperability measurement and management methodology which will be presented in the second part of the paper. The discipline of enterprise modelling aims at capturing all dimensions of an enterprise in a simplified model. Thus enterprise models are the appropriate basis for managing collaborative enterprise as they reduce the complexity of interoperability problems. Therefore, a first objective of this paper is to present an approach that enables companies to get the most effect out of enterprise modelling in a collaborative environment based on the maturity of their organisation relative to modelling. Within this first step, the user will get recommendations e.g. for the correct modelling language as well as the right level of detail.