Reprodutibilidade de medidas antropométricas estáticas de graduandos de odontologia e de mochos odontológicos

Objective: To evaluate the intraexaminer reproducibility of static anthropometric measurements of undergraduate dental students as well as the characteristics and regulating measurements of the dental stools used by them. Methods: Forty volunteers and 6 types of dental stools were evaluated. For the anthropometric measurements the employed equipments were: an adapted office chair, aflexible measuring tape with two adapted rods, a metallic device with a 90 degree central angle, string, a 35 x 24 cm rectangular wooden board, isolating tape and crepe tape. In order to standardize the position of the adapted office chair and the volunteers' feet, the floor was marked with the isolating and crepe tapes. A string was attached to the waist of each volunteer to mark the area corresponding to the kidney region making it possible to measure the seat-renal region area. The examined anthropometric measurements were height, trunkcephalic heigh, sacral-popliteal distance (OK?), hip width, popliteal height and the seat-renal region height. The evaluated characteristics of the dental stools relative to the seat were depth, horizontal width and minimum/maximum height. The back of the dental stool was evaluated as for the minimum/ maximum height adjustment. The anthropometric and dental stool measurements were obtained by a single examiner at two moments with a 1-week interval between the evaluations. Intra-class correlation coefficient (ρ) was used to estimate the intraexaminer reproducibility. Results: Excellent reproducibility was observed for all anthropometric measurements obtained (ρ=0.99) as well as for all dental stools evaluated (ρ=0.99). Conclusion: The method used to obtain the anthropometric and dental stools measurements was reproducible and can be used reliably.

Bibliotecas, arquivos e museus como centros de referência na dimensão cultural das comunidades

With the evolution of the organizations theory, new management practices have transformed the institutions. The improvement of these management practices in cultural unities (UCs) is constant, and interacts in the international axis, since each unity increasingly communicate with other. As a reflection of organizational administrative practices, UCs had developed and assumed the organizational theories to make easy a framework for effective management practices. Comprehending the importance of the studies on UCs requires both a new approach of existing public politics for this field, and the recognition of the Information Science knowledge on area. In this way, it was planned to develop a model constituting a tool for managers in these institutions through the experience of laboratory works carried out with researchers from the European community. Libraries and museums are institutions that operate in the social process of their communities and the archives establish their structural spaces in parallel with the political, economic and social environments of the communities, translate the society and its organic sphere of informational performance. The information transposes a cyclical and essential role for the arrangement of the effective and necessary record to the organizational process and the institutional growth. Studies of this nature contribute to value a economy based on knowledge, and its production emphasizes the human capital that permeates the condition of the information in support for the development of communities and the growth of the organizational environment in political, social and cultural spheres.

Characterization of texture in image of skin lesions by support vector machine

Due to the increased incidence of skin cancer, computational methods based on intelligent approaches have been developed to aid dermatologists in the diagnosis of skin lesions. This paper proposes a method to classify texture in images, since it is an important feature for the successfully identification of skin lesions. For this is defined a feature vector, with the fractal dimension of images through the box-counting method (BCM), which is used with a SVM to classify the texture of the lesions in to non-irregular or irregular. With the proposed solution, we could obtain an accuracy of 72.84%. © 2012 AISTI.

Pluriactividad y agricultura familiar en Brasil: el caso de Rio Grande do Sul

Incluye Bibliografía

Pluriactivity and family farming in Brazil: the case of Rio Grande do Sul

Includes bibliography

Brasil: ¿cómo reaccionan los mercados financieros ante los anuncios de política monetaria del banco central en un esquema de metas de inflación?

Incluye Bibliografía

Financial market reaction to central bank monetary policy communications under an inflation- targeting regime: the case of Brazil

Includes bibliography

Evaluation of degree of conversion and hardness of dental composites photoactivated with different light guide tips

Objective: The aim of this study was to evaluate the degree of conversion and hardness of different composite resins, photo-activated for 40 s with two different light guide tips, fiber optic and polymer. Methods: Five specimens were made for each group evaluated. The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm-1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm-1. The Vickers hardness measurements were performed in a universal testing machine. A 50 gf load was used and the indenter with a dwell time of 30 seconds. The degree of conversion and hardness mean values were analyzed separately by ANOVA and Tukey's test, with a significance level set at 5%. Results: The mean values of degree of conversion for the polymer and fiber optic light guide tip were statistically different (P<.001). The hardness mean values were statistically different among the light guide tips (P<.001), but also there was difference between top and bottom surfaces (P<.001). Conclusions: The results showed that the resins photo-activated with the fiber optic light guide tip promoted higher values for degree of conversion and hardness.

Compressive strength of dental composites photo-activated with different light tips

The aim of this study was to evaluate the compressive strength of microhybrid (Filtek™ Z250) and nanofilled (Filtek™ Supreme XT) composite resins photo-activated with two different light guide tips, fiber optic and polymer, coupled with one LED. The power density was 653 mW cm -2 when using the fiber optic light tip and 596 mW cm-2 with the polymer. After storage in distilled water at 37 ± 2 °C for seven days, the samples were subjected to mechanical testing of compressive strength in an EMIC universal mechanical testing machine with a load cell of 5 kN and speed of 0.5 mm min-1. The statistical analysis was performed using ANOVA with a confidence interval of 95% and Tamhane's test. The results showed that the mean values of compressive strength were not influenced by the different light tips (p > 0.05). However, a statistical difference was observed (p < 0.001) between the microhybrid composite resin photo-activated with the fiber optic light tip and the nanofilled composite resin. Based on these results, it can be concluded that microhybrid composite resin photo-activated with the fiber optic light tip showed better results than nanofilled, regardless of the tip used, and the type of the light tip did not influence the compressive strength of either composite. Thus, the presented results suggest that both the fiber optic and polymer light guide tips provide adequate compressive strength to be used to make restorations. However, the fiber optic light tip associated with microhybrid composite resin may be an interesting option for restorations mainly in posterior teeth. © 2013 Astro Ltd.

Estimativa da área e capacidade de retenção foliar de calda em citros

This work was done to determine the maximum amount of liquid that the citrus leaves can hold back and compare alternative methods for estimating leaf area with the standard method of integrating electronic image. The alternative methods were leaf mirroring on paper and leaf digitalization and imagine analyzes. The spray retention capacity was evaluated with mitecide sprayed with cyhexatin (Sipcatin 500 CS) plus the treatments: combination of two adjuvants (mineral oil - Assist and vegetable oil - Veget'Oil) and two concentrations (10 and 15 mL of adjuvant L-1). The methods for estimating leaf area assessed do not differ between them. The maximum retention of liquids for the leaf occurred when vegetable oil in the application was used.

Red Colombiana de Información y Documentación Económica

Incluye Bibliografía

Dynamical properties for an ensemble of classical particles moving in a driven potential well with different time perturbation

We consider dynamical properties for an ensemble of classical particles confined to an infinite box of potential and containing a time-dependent potential well described by different nonlinear functions. For smooth functions, the phase space contains chaotic trajectories, periodic islands and invariant spanning curves preventing the unlimited particle diffusion along the energy axis. Average properties of the chaotic sea are characterised as a function of the control parameters and exponents describing their behaviour show no dependence on the perturbation functions. Given invariant spanning curves are present in the phase space, a sticky region was observed and show to modify locally the diffusion of the particles. © 2013 Elsevier B.V.

Seletividade do herbicida saflufenacil aplicado em pós-emergência em dez variedades de cana-de-açúcar na condição de soca

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise discursiva de dicionários de língua portuguesa

Pós-graduação em Estudos Linguísticos - IBILCE

Solução da equação de Fokker-Planck para o potencial do oscilador harmônico duplo

Pós-graduação em Biofísica Molecular - IBILCE