Bis(3-endo-camphoryl)phosphinic acid, a non-racemic helical supramolecular host with aquapores

Bis(3-endo-camphoryl)phosphinic acid (1) was prepared by the reaction of the lithium enolate of D-(+)-camphor and phosphorous trichloride followed by an oxidative work up. Compound 1 crystallizes from wet toluene as monohydrate 1·H2O, which was investigated by X-ray crystallography. Molecules of 1 are associated by strong hydrogen bonds giving rise to the formation of a supramolecular helix. The interior channel of the helix is filled by a one-dimensional (1D) string of water molecules that are also associated by hydrogen bonding. The 1D string adopts a twisted zigzag conformation. Although the hydrogen bond networks are not cross-linked both the screw of the helix and the twist of the 1D string of water molecules are left-handed (M) and controlled by the chiral camphoryl residues situated on the exterior of the helix. The overall supramolecular structure is strongly reminiscent of aquaporin-1, a significant membrane-channel protein responsible for the transport of water into the cells.

Chemiluminescence from reactions with bis-cyclometalated iridium complexes in acidic aqueous solution

Chemical reactions between certain bis-cyclometalated iridium complexes, cerium(IV) and organic reducing agents in aqueous solution produce an emission of light which in some cases is more intense than that from analogous reactions with conventional ruthenium-based reagents, thus providing a new avenue for chemically-initiated luminescence detection.

Structural characterization of novel ionic materials incorporating the bis(trifluoromethanesulfonyl)amide anion

A range of low melting salts of the bis(trifluoromethanesulfonyl)amide (TFSA) anion with hindered organic cations (N-methyl-1-methylpyrrolinium, N,N-dimethylpyrrolidinium, N,N,N,-trimethylammonium, and N,N,N,N-tetrakis(n-propyl)ammonium) have been crystallized. Single-crystal X-ray diffraction data show these materials to consist of discrete ions with only weak C−H···O (or for Me₃NH N−H···O) contacts between the constituent atoms of the cations and anions close to the limits of van der Waals separations. Consequently, the observed physical properties of these materials presumably result from the diffuse negative charge on the TFSA anion and inefficient packing of these large and irregularly shaped ions.

Weak intermolecular interactions in sulfonamide salts : structure of 1-ethyl-2-methyl-3-benzyl imidazolium bis[(trifluoromethyl)sulfonyl]amide

The crystal structure of a 1,2,3-trisubstituted imidazolium salt of the bis[(trifluoromethyl)sulfonyl)]amide ion is presented; this salt is a prototype for similar, room temperature liquid, imidazolium salts; the structure shows that the anion and cation interact weakly, with little if any hydrogen bonding present.

N-methyl-N-alkylpyrrolidinium bis(perfluoroethylsulfonyl)amide ([NPf2]–) and tris(trifluoromethanesulfonyl)methide ([CTf3]–) salts : synthesis and characterization

Novel salts based the pyrrolidinium cation [C_nmpyr]⁺ (where n denote the number of carbons in the straight alkyl chain) and either the [NPf₂]^– or [CTf₃]^– anions have been synthesized and characterized to determine their thermal behaviour, stability, and conductivity. [C₁mpyr][NPf₂], [C₂mpyr][NPf₂], and [C₁mpyr][CTf₃] exhibit behaviour indicative of a plastic crystal phase. Both [C₃mpyr][NPf₂] and [C₄mpyr][NPf₂] are RTILs, while all of the [CTf₃]^– salts, have melting points above 60°C. [C₃mpyr][NPf₂] exhibited the widest electrochemical window of 5.5 V. The [NPf2]– salt exhibited similar reductive limits to the [NTf₂]^– anion, –3.2 V versus Fc⁺|Fc, while [CTf₃]^– had lower reductive stability. The [CTf₃]^– salts were more stable towards oxidation, +2.5 V versus Fc⁺|Fc, compared to the [NPf₂]^– and [NTf₂]^– salts.

Aluminium speciation in 1-Butyl-1-Methylpyrrolidinium Bis(trifluoromethylsulfonyl)amide/AlCl3 mixtures

Aluminium speciation: Aluminium speciation in NTf₂ ionic liquids has a strong influence on its electrodeposition from the liquid mixture. This work probed the nature of these species and proposes that the electroactive species involved are either [AlCl₃(NTf₂)]⁻ or [AlCl₂(NTf₂)₂]⁻ (e.g., see figure).


Electrodeposition of aluminium is possible from solutions of AlCl₃ dissolved in the 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (C₄mpyrNTf₂) ionic liquid. However, electrodeposition is dependant on the AlCl₃ concentration as it only occurs at concentrations >1.6 mol L⁻¹. At these relatively high AlCl₃ concentrations the C₄mpyrNTf₂/AlCl₃ mixtures exhibit biphasic behaviour. Notably, at 1.6 mol L⁻¹ AlCl₃, aluminium can only be electrodeposited from the upper phase. Conversely, we found that at 3.3 mol L⁻¹ aluminium electrodeposition can only occur from the lower phase. The complex chemistry of the C₄mpyrNTf₂/AlCl₃ system is described and implications of aluminium speciation in several C₄mpyrNTf₂/AlCl₃ mixtures, as deduced from Raman and ²⁷Al NMR spectroscopic data, are discussed. The ²⁷Al NMR spectra of the C₄mpyrNTf₂/AlCl₃ mixtures revealed the presence of both tetrahedrally and octahedrally coordinated aluminium species. Raman spectroscopy revealed that the level of uncoordinated NTf₂⁻ anions decreased with increasing AlCl₃ concentration. Quantum chemical calculations using density functional and ab initio theory were employed to identify plausible aluminium-containing species and to calculate their vibrational frequencies, which in turn assisted the assignment of the observed Raman bands. The data indicate that the electroactive species involved are likely to be either [AlCl₃(NTf₂)]⁻ or [AlCl₂(NTf₂)₂]⁻.

Study on the role of stearic acid and ethylene-bis-stearamide on the mechanical alloying of a biomedical titanium based alloy

The present study examines the influence of different contents and types of process control agent (PCA), i.e., stearic acid (SA) and ethylene-bis-stearamide (EBS), on the microstructural evolution and characteristics of Ti-16Sn-4Nb (wt pct) alloy powders and bulk samples. The characterization of the powders and bulk samples was carried out by using chemical analysis, optical microscopy, scanning electron microscopy (SEM) combined with energy-dispersive spectrometry (EDS), and X-ray diffractometry. Results indicated that the powder recovered from the ball milling containers increased with increasing amounts of SA and EBS. Furthermore, adding more SA or EBS to the powder mixture resulted in a considerably smaller particle size, with a flaky-shaped morphology for the given ball milling time. Also, a slightly higher effectiveness was found for EBS when compared to SA. Meanwhile, the addition of both SA and EBS led to a delay in the alloy formation during mechanical alloying (MA) and caused contamination of the material with mainly carbon (C) and oxygen (O). An optimum amount of 1 wt pct PCA led to a good balance between cold welding and fracturing, and thus favored the formation of the titanium alloy. The microstructural observation of the bulk alloy showed a homogeneous distribution of fine Nb-rich ß-phase colonies within the α-Ti matrix with the addition of PCA less than 1 wt pct.

Synthesis, x-ray structure of ferrocene bearing Bis(Zn-cyclen) complexes and the selective electrochemical sensing of TpT

The new ligand, [Fc(cyclen)₂] (5) (Fc=ferrocene, cyclen=1,4,7,10-tetraazacyclododecane), and corresponding Zn^II complex receptor, [Fc{Zn(cyclen)(CH₃OH)}₂](ClO₄)₄ (1), consisting of a ferrocene moiety bearing one Zn^II-cyclen complex on each cyclopentadienyl ring, have been designed and prepared through a multi-step synthesis. Significant shifts in the ¹H NMR signals of the ferrocenyl group, cf. ferrocene and a previously reported [Fc{Zn(cyclen)}]²⁺ derivative, indicated that the two Zn^II-cyclen units in 1 significantly affect the electronic properties of the cyclopentadienyl rings. The X-ray crystal structure shows that the two positively charged Zn^II-cyclen complexes are arranged in a trans like configuration, with respect to the ferrocene bridging unit, presumably to minimise electrostatic repulsion. Both 5 and 1 can be oxidized in 1:4 CH₂Cl₂/CH₃CN and Tris-HCl aqueous buffer solution under conditions of cyclic voltammetry to give a well defined ferrocene-centred (Fc⁰/+) process. Importantly, 1 is a highly selective electrochemical sensor of thymidilyl(3′-5′)thymidine (TpT) relative to other nucleobases and nucleotides in Tris-HCl buffer solution (pH 7.4). The electrochemical selectivity, detected as a shift in reversible potential of the Fc⁰/+ component, is postulated to result from a change in the configuration of bis(Zn^II-cyclen) units from a trans to a cis state. This is caused by the strong 1:1 binding of the two deprotonated thymine groups in TpT to different Zn^II centres of receptor 1. UV-visible spectrophotometric titrations confirmed the 1:1 stoichiometry for the 1:TpT adduct and allowed the determination of the apparent formation constant of 0.89±0.10×10⁶ M⁻¹ at pH 7.4.

Ionic liquid electrolyte for lithium metal batteries : physical, electrochemical, and interfacial studies of N-Methyl-N-butylmorpholinium Bis(fluorosulfonyl)imide

The ionic liquid (IL) N-methyl-N-butylmorpholinium bis(fluorosulfonyl)imide (C₄mmor FSI) is examined from physical and electrochemical perspectives. Pulsed field gradient NMR spectroscopy shows that ion diffusivities are low compared with similar, non-ethereal ILs. Ionicity values indicate that above room temperature, less than 50% of ions contribute to conductivity.

Lithium cycling in symmetrical cells using a C₄mmor FSI-based electrolyte is best demonstrated at elevated temperatures. Specific capacities of 130 mAh g⁻¹ are achieved in a Li−LiFePO₄ battery at 85 °C. FT-IR spectroscopic investigations of lithium electrodes suggest the presence of alkoxide species in the solid electrolyte interphase (SEI), implying a ring-opening reaction of C₄mmor with lithium metal. In contrast, the SEI derived from N-methyl-N-propylpiperidinium FSI lacks the alkoxide signature but shows signs of alkyl unsaturation, and the activation energy for Li+ transport through this SEI is slightly lower than that for the C₄mmor-derived SEI. Our detailed findings give insight into the capabilities and limitations of rechargeable lithium metal batteries utilizing a C₄mmor FSI electrolyte.

Green chemiluminescence from a bis-cyclometalated iridium(III) complex with an ancillary bathophenanthroline disulfonate ligand

The reaction of a fluorinated iridium complex with cerium(IV) and organic reducing agents generates an intense emission with a significant hypsochromic shift compared to contemporary chemically-initiated luminescence from metal complexes.

Electrochemistry at negative potentials in Bis(trifluoromethanesulfonyl)amide ionic liquids

The bis(trifluoromethanesulfonyl)amide (TFSA) anion is widely studied as an ionic liquid (IL) forming anion which imparts many useful properties, notably electrochemical stability. Here we present electrochemical and spectroscopic evidence indicating that reductive decomposition of the bis(trifluoromethanesulfonyl)amide (TFSA) anion begins at ~ −2.0 V vs. Fc+/Fc, well before the reported cathodic limit for many of these ILs. These processes are shown to be dependent upon the electrode substrate and are influenced by the water content of the IL. Supporting ab initio calculations are presented which suggest a possible mechanism for the anion decomposition. The products appear to passivate the electrode surface and the implications of this behaviour are discussed.