958 resultados para Avaliação da pós-graduação
Resumo:
This work aims to study the effects of adding antioxidants, such as, α- tocopherol and BHT on the thermal and oxidative stability of biodiesel from cottonseed (B100). The Biodiesel was obtained through the methylical and ethylical routes. The main physical and chemical properties of cotton seed oil and the B100 were determined and characterized by FTIR and GC. The study of the efficiency of antioxidants, mentioned above, in concentrations of 200, 500, 1000, 1500, 2000ppm, to thermal and oxidative stability, was achieved by Thermogravimetry (TG), Differential Thermal Analysis (DTA), Differential Scanning Calorimetry (DSC), Differential Scanning Calorimetry - Hi-Pressure (P-DSC) and Rancimat. The Biodiesel obtained are within the specifications laid down by Resolution of ANP No7/2008. The results of TG curves show that the addition of both antioxidants, even in the lowest concentration, increases the thermal stability of Biodieseis. Through the DTA and DSC it was possible to study the physical and chemical transitions occurred in the process of volatilization and decomposition of the material under study. The initial time (OT) and temperature (Tp) of oxidation were determined through the P-DSC curve and they showed that the α-tocopherol has a pro-oxidant behavior for some high concentrations. The BHT showed better results than the α-tocopherol, with regard to the resistance to oxidation
Resumo:
The objective of this study was to analyze the oxidative stability of biodiesel from jatropha obtained from different purification processes, three wet processes with different drying (in a vacuum oven, conventional oven and in anhydrous sodium sulfate) and dry (purification with magnesium silicate adsorbent). Raw materials of different qualities (jatropha crop ancient and recent crop) were used. The Jatropha oil was extracted by mechanical extraction and refined. The Jatropha biodiesel was obtained by the transesterification reaction in ethyl route using alkaline catalysis. The biodiesel samples were characterized by analysis of water content, carbon residue, Absorption Spectroscopy in the Infrared Region and Thermogravimetry. Thermogravimetric curves of purified PUsv* PUsq* and had higher initial decomposition temperatures, indicating that the most stable, followed by samples PU* and PUSC*. Besides the sample SP* is a smaller initial temperature, confirming the sample without purification to be less thermally stable. The percentage mass loss of the purified samples showed conversion of about 98.5%. The results of analyzes carbon residue and infrared suggested that contamination by impurities is the main factor for decreased oxidative stability of biodiesel. The oxidative stability was assessed from periodic monitoring, using the techniques of Rancimat, peroxide index, acid value and Pressurized Differential Scanning Calorimetry. Samples of biodiesel from jatropha which showed better oxidative stability were of the best quality raw material and wet scrubbing: PUsq* with dry chemical, using anhydrous sodium sulfate and PUsv* with vacuum drying, which had oxidative stability 6 hours in Rancimat time 0 days, within the limits established by the Technical Regulation No. 4/2012 of the ANP, without the addition of antioxidant, suggesting that these procedures the least influence on the oxidative stability of biodiesel
Resumo:
The pulps are products that add economic value enjoy the fruits of the surplus productions of the same. Have good market acceptance because of its practicality and diversity of flavors available year round. In order to assess the quality of the fruit pulp through the physical and chemical parameters and the characteristics of manufacturing industry, we analyzed 36 samples of frozen fruit pulp of three brands marketed in RIO Grande do Norte, 14 brand A, 12 of 10 brand B and brand C, which corresponded to 14 different flavors, of which 10 have identity Standards and Quality (ISQ S) established by the Ministério da Agricultura, Pecuária e Abastecimento (MAPA), totaling 27 samples with ISQ s. We conducted the following physicalchemical analyzes on samples of fruit pulp: Total solids, total soluble solids, pH, titratable acidity, total sugars and the determination of ascorbic acid. The percentage of failure for each parameter evaluated was 37, 04% in total soluble solids, 22,22% for total solids and titratable acidity, 7,40% in relation to pH. The total sugars were within the requirements demanded by the MAPA and ascorbic acid content, determined only in the pulp of acerola and cashew, presented a non compliance in the pulp of brand B. The percentage of failures of the pulps with ISQ S was 59% with brand A, B and C accounted for 3,70%, 33,33% and 22,22% respectively. The pulps which have no established atandards such as pineapple pulp, showed similar values between brands and literature data unlike the pulp of plum, jackfruit and tamarind which diverged greatly in parameters such as total solids and total soluble solids. The study demonstrates the need for greater quality control by the producers with respect to raw materials, processing, packing, stored and the importance of ISQ S to establish the flavors have not yet covered by existing legislation, but already highly commercialized
Resumo:
The contamination by metal ions has been occurring for decades through the introduction of liquid effluent not treated, mainly from industrial activities, rivers and lakes, affecting water quality. For that the effluent can be disposed in water bodies, environmental standards require that they be adequately addressed, so that the concentration of metals does not exceed the limits of standard conditions of release in the receptor. Several methods for wastewater treatment have been reported in the literature, but many of them are high cost and low efficiency. The adsorption process has been used as effective for removal of metal ions. This paper presents studies to evaluate the potential of perlite as an adsorbent for removing metals in model solution. Perlite, in its natural form (NP) and expanded (EP), was characterized by X-ray fluorescence, X-ray diffraction, surface area analysis using nitrogen adsorption (BET method), scanning electron microscopy and Fourier transform infrared spectroscopy. The physical characteristic and chemical composition of the material presented were appropriate for the study of adsorption. Adsorption experiments by the method of finite bath for model solutions of metal ions Cr3+, Cu2+, Mn2+ and Ni2+ were carried out in order to study the effect of pH, mass of the adsorbent and the contact time on removal of ions in solution. The results showed that perlite has good adsorption capacity. The NP has higher adsorption capacity (mg g-1) than the EP. According to the values of the constant of Langmuir qm (mg g-1), the maximum capacity of the monolayer was obtained and in terms of proportion of mass, we found the following order experimental adsorption: Cr3+ (2.194 mg g- 1) > Ni2+ (0.585 mg g-1) > Mn2+ (0.515 mg g-1) > Cu2+ (0.513 mg g-1) and Cr3+ (1.934 mg g-1)> Ni2+ (0.514 mg g-1) > Cu2+ (0.421 mg g-1) > Mn2+ (0.364 mg g-1) on the NP and EP, respectively. The experimental data were best fitted the Langmuir model compared to Freundlich for Cu2+, Mn2+ and Ni2+. However, for the Cr3+, both models fit the experimental data
Resumo:
Statistics of environmental protection agencies show that the soil has been contaminated with problems often resulting from leaks, spills and accidents during exploration, refining, transportation and storage oil operations and its derivatives. These, gasoline noteworthy, verified by releasing, to get in touch with the groundwater, the compounds BTEX (benzene, toluene, ethylbenzene and xylenes), substances which are central nervous system depressants and causing leukemia. Among the processes used in remediation of soil and groundwater contaminated with organic pollutants, we highlight those that use hydrogen peroxide because they are characterized by the rapid generation of chemical species of high oxidation power, especially the hydroxyl radical ( OH), superoxide (O2 -) and peridroxil (HO2 ), among other reactive species that are capable of transforming or decomposing organic chemicals. The pH has a strong effect on the chemistry of hydrogen peroxide because the formation of different radicals directly depends on the pH of the medium. In this work, the materials MCM-41 and Co-MCM-41 were synthesized and used in the reaction of BTEX removal in aqueous media using H2O2. These materials were synthesized by the hydrothermal method and the techniques used to characterize were: XRD, TG/DTG, adsorption/desorption N2, TEM and X-Ray Fluorescence. The catalytic tests were for 5 h of reaction were carried out in reactors of 20 mL, which was accompanied by the decomposition of hydrogen peroxide by molecular absorption spectrophotometry in the UV-Vis, in addition to removal of organic compounds BTEX was performed as gas chromatography with detection photoionization and flame ionization and by static headspace sampler. The characterizations proved that the materials were successfully synthesized. The catalytic tests showed satisfactory results, and the reactions containing BTEX + Co-MCM-41 + H2O2 at pH = 12.0 had the highest percentages of removal for the compounds studied
Resumo:
Sustainable development is a major challenge in the oil industry and has aroused growing interest in research to obtain materials from renewable sources. Carboxymethylcellulose (CMC) is a polysaccharide derived from cellulose and becomes attractive because it is water-soluble, renewable, biodegradable and inexpensive, as well as may be chemically modified to gain new properties. Among the derivatives of carboxymethylcellulose, systems have been developed to induce stimuli-responsive properties and extend the applicability of multiple-responsive materials. Although these new materials have been the subject of study, understanding of their physicochemical properties, such as viscosity, solubility and particle size as a function of pH and temperature, is still very limited. This study describes systems of physical blends and copolymers based on carboxymethylcellulose and poly (N-isopropylacrylamide) (PNIPAM), with different feed percentage compositions of the reaction (25CMC, 50CMC e 75CMC), in aqueous solution. The chemical structure of the polymers was investigated by infrared and CHN elementary analysis. The physical blends were analyzed by rheology and the copolymers by UV-visible spectroscopy, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. CMC and copolymer were assessed as scale inhibitors of calcium carbonate (CaCO3) using dynamic tube blocking tests and chemical compatibility tests, as well as scanning electron microscopy (SEM). Thermothickening behavior was observed for the 50 % CMC_50 % PNIPAM and 25 % CMC_75 % PNIPAM physical blends in aqueous solution at concentrations of 6 and 2 g/L, respectively, depending on polymer concentration and composition. For the copolymers, the increase in temperature and amount of PNIPAM favored polymer-polymer interactions through hydrophobic groups, resulting in increased turbidity of polymer solutions. Particle size decreased with the rise in copolymer PNIPAM content as a function of pH (3-12), at 25 °C. Larger amounts of CMC result in a stronger effect of pH on particle size, indicating pH-responsive behavior. Thus, 25CMC was not affected by the change in pH, exhibiting similar behavior to PNIPAM. In addition, the presence of acidic or basic additives influenced particle size, which was smaller in the presence of the additives than in distilled water. The results of zeta potential also showed greater variation for polymers in distilled water than in the presence of acids and bases. The lower critical solution temperature (LCST) of PNIPAM determined by DLS corroborated the value obtained by UV-visible spectroscopy. SAXS data for PNIPAM and 50CMC indicated phase transition when the temperature increased from 32 to 34 °C. A reduction in or absence of electrostatic properties was observed as a function of increased PNIPAM in copolymer composition. Assessment of samples as scale inhibitors showed that CMC performed better than the copolymers. This was attributed to the higher charge density present in CMC. The SEM micrographs confirmed morphological changes in the CaCO3 crystals, demonstrating the scale inhibiting potential of these polymers
Resumo:
The accelerated industrialization, coming with the Industrial Revolution, caused profound changes in the working world. These changes led to the households risks from work environment. Trying to assist comprehensively the health of workers, Brazil has a program of Health Care Workers in the Primary Care, and the Family Health Strategy is the main entrance for this system. The study sought to determine if the actions of the health care worker have been developed in primary care through the Family Health Strategy. This is a quantitative study with a methodological evaluation, focusing on normative assessment. The sample was formed by professionals from Team Family Health Strategy, in the municipalities of Pau dos Ferros, Caicó and Natal in Rio Grande do Norte state. The sample consists of 202 professionals (Doctors, Nurses, Assistant / Technician Nursing and Community Health Workers) in 52 Health Family Units from the 3 municipalities cited. The instrument used consists of a checklist, from Manual of Primary Care 5 - Family Health - Occupational Health, Ministry of Health. The data were analyzed describing the variables by its frequency and doing a classification of cities from the scores obtained by each. It was observed that the Family Health professionals know the program of health care worker, however do not know the Manual of Primary Care 5, which is a guidance tool. As a result of non-appropriation of the FHT professionals with worker health, these activities are not performed, mainly surveillance in occupational health and health education labor
Resumo:
The aim of this study was to comparatively evaluate the mechanical strength of squared and rectangular 2.0 mm system miniplates comparing them to the standard configuration with 2 straight miniplates in stabilizing fractures in the anterior mandible. Ninety synthetic polyurethane mandible replicas were used in mechanical test. The samples were divided into six groups of three different methods for fixation. Groups 1, 2 and 3 showed complete fractures in symphysis, characterized by a linear separation between the medial incisor, and groups 4, 5 and 6 showed complete fractures in parasymphysis with oblique design. Groups 1 and 4 were represented by the standard technique with two straight miniplates parallel to each other. Groups 2 and 5 were stabilized by squared miniplates and groups 3 and 6 were fixed by rectangular design. Each group was subjected to a mechanical test at a displacement speed of 10 mm/min on a universal testing machine, receiving linear vertical load on the region of the left first molar. The values of the maximum load and when displacements reached 5 mm were obtained and statistically analyzed by calculating the confidence interval of 95%. Fixation systems using squared (G2) and rectangular (G3) miniplates obtained similar results. No statistically significant differences with respect to the maximum load and the load at 5 mm displacement were found when compared to standard method in symphyseal fractures (G1). In parasymphysis the fixation method using squared miniplates (G5) obtained results without significant differences regarding the maximum load and the load at 5 mm when compared to the standard configuration (G4). The fixation method using rectangular miniplates (G6) showed inferior results which were statistically significant when compared to the standard configuration (G4) for parasymphysis fractures. The mechanical behavior of the fixation methods was similar, except when rectangular miniplates were used. The fixation methods showed better results with statistical significance in symphyseal fractures
Resumo:
Most cochlear implant (CI) users, who suffer from post lingual hearing loss, are able to perceive sounds and comprehend speech after the implant. The prediction of maximal benefit over time, with the use of CI, can be useful for counseling patients about their expectations in using the new device. The measurement of satisfaction should be of primary interest in medical intervention, as the results may be used for intervention feedback. The purpose of this study is to analyze auditory performance of CI over time, as well as to evaluate users‟ satisfaction. Therefore two types of study designs were employed: a) retrospective cohort study with the analysis of medical records from 59 subjects about auditory performance before and after surgery. Results were submitted to the Kaplan -Meier estimator of cumulative probability and compared to prognostic factors of auditory performance using the logrank test. b) A sectional study design was conducted to evaluate the satisfaction of 51 subjects. The instrument consists of two specific questionnaires: Satisfaction with Amplification in Daily Life SADL and International Outcome Inventory Cochlear Implant IOI- CI. Results show statistical significant differences (p<0,001) in auditory performance before and after CI. The majority obtained satisfactory results of CI use during the first six months. Logrank tests does not indicate significant correlation between the analyzed covariates and the time in which adequate speech perception occurs. SADL e IOI-CI questionnaires indicate that most of the CI users are satisfied with their devices. The SADL detected a 27, 5% insatisfaction amongst CI users in relation to services and costs involved with the CI. The results of the IOI show 4% of insatisfaction with the use of CI and the social environment. In conclusion CI is capable to rehabilitate social auditory function in a short period of time and CI users demonstrate satisfaction with auditory, social and psychological gain offered through CI device
Resumo:
This study aimed to evaluate patients who underwent placement of zygomatic implants technique by Stella & Warner, considering the survival of conventional and zygomatic implants, sinus health and level of patient satisfaction in relation to oral rehabilitation. We evaluated 28 patients where 14 had received conventional and zygomatic implants, being rehabilitated with implant-fixed dentures (group 1) and 14 were rehabilitated only with conventional implants and implant-fixed dentures (group 2). The study had four phases, represented by radiographic evaluation of implants (stage I), clinical evaluation (stage II), assessing the health of the maxillary sinus (stage III) and a questionnaire to measure satisfaction of rehabilitation with fixed prosthesis implant Total -backed (stage IV). Group 2 underwent only stage IV, while group 1 participated in all stages. Descriptive analysis and statistics were performed, using the t test for independent samples in the evaluation of phase IV. The results demonstrated that the technique of Stella & Warner proved effective, allowing a high survival rate of conventional implants and zygomatic (100%), considering a minimum follow-up of 15 months and maximum 53 months after prosthetic rehabilitation. There were no pathological changes in tissues periimplants conventional and zygomatic implants analyzed. Radiographic findings showed satisfactory levels bone implants in the oral rehabilitation with conventional zygomatic implants and a good positioning of the apex of the zygomatic implants over the zygomatic bone. The presence of the zygomatic implant did not cause sinus and the t test showed a satisfaction index lower in group 1 compared with group 2. The zygomatic implant placement technique by Stella & Warner proved to be a predictable technique with high survival rate in patients with atrophic jaws, necessitating long-term follow-up to confirm the initial findings of the study
Resumo:
The evaluation criteria of the cases treated with dental implants are based on clinical and radiographic tests. In this context it is important to conduct research to determine prognosis of different types of prosthetic rehabilitation and determination of the main problems affecting this type of treatment. Thus, the objective of this study was to assess the prosthetic conditions of individuals rehabilitated with implant-supported prosthesis. In this cross-sectional study 153 patients were treated, accounting for a sample of 509 implants. The failures were observed by clinical and radiographic examination. The results showed that the fracture (0.2%) loss (0.4%) and loosening of the screws (3.3%) were failures are less frequent. The fracture structures as the resin (12.4%), porcelain (5.5%) and metallic (1.5%), loss of resin that covers the screw (23.8%) and loss of retention overdentures on implants (18.6%) had a higher occurrence. The failure of adaptation between the abutment and the implant (6.9%) and especially between the prosthesis and the abutment (25.4%) had a high prevalence and, when related to other parameters showed a significant association, particularly with the cemented prosthesis (OR = 6.79). It can be concluded that to minimize the appearance of failures, protocols must be observed from diagnosis to the settlement and control of prostheses on implants, particularly with respect to technical steps of the making of the prosthesis and care in radiographic evaluating the fit between their components
Resumo:
Tem sido demonstrado que o diabetes influencia no desenvolvimento e progressão da doença periodontal. Acredita-se ainda que há uma relação bi-direcional entre o Diabetes Mellito e a Doença Periodontal. Por isso, o tratamento periodontal pode responder de forma diferente em pacientes com e sem o quadro de diabetes. O objetivo desse estudo foi avaliar clinicamente o efeito da terapia periodontal não cirúrgica em pacientes com periodontite e diabetes mellito (grupo teste) e sem o quadro de diabetes (grupo controle). Para isso, realizou-se o tratamento periodontal não-cirúrgico FMSRP (Full mouth Scalling and Root Planing) e verificou-se os parâmetro clínicos periodontais (profundidade de sondagem, nível clínico de inserção, mobilidade, índice gengival e índice de placa) no início do estudo e após 3 meses. Na análise estatística, o paciente foi considerado como unidade de análise (p<0,05). Para as variáveis categóricas utilizou-se o teste de Fisher. Nas comparações inter-grupo, foi utilizado o Mann-Whitney Test e para comparações intra-grupo (baseline e três meses) utilizou-se o Teste de Wilcoxon. Participaram 26 pacientes no grupo controle e 14 no grupo teste. O índice de placa era 71,20% no início do estudo para o grupo teste e ficou 47,12% no fim; já no controle, os valores eram de 48,52% passando para 37,50%. E o índice gengival no grupo teste no baseline era 42,67 diminuindo para 26,81 e no grupo controle diminuiu de 41,36 para 30,62. A profundidade de sondagem foi no grupo teste 2,71mm passando para 2,40mm; já no controle, os valores foram de 2,84mm diminuindo para 2,55mm. O grupo controle ganhou 0,34 mm de inserção e o grupo teste perdeu 0,44mm de inserção. A recessão gengival aumentou 0,33mm no grupo teste e 0,04mm no grupo controle após os 3 meses. Houve diferença significativa inter-grupo para o índice de placa e gengival no baseline, também foi encontrado na recessão após 3 meses; já intra-grupo verificou-se diferença significativa para todas as variáveis, exceto para o nível clinico de inserção e mobilidade. Quando se categorizou a profundidade de sondagem em ≤3mm, >3 e≤6mm e >6mm, não foi encontrado diferença entre os grupos, mas verificou-se diferença significativa entre os períodos tanto para o grupo teste como para o controle. A hemoglobina glicada no grupo controle foi de 5,90% e no teste aumentou de 7,79% para 8,10%. Portanto, verifica-se que há uma melhora dos parâmetros clínicos periodontais em ambos os grupos, contudo não se verificou uma diferença significativa entre eles. Não obstante, o FMSRP promove um efeito benéfico em relação à condição de saúde periodontal, melhora dos parâmetros clínicos periodontais, em curto prazo (3 meses) tanto em indivíduos diabéticos como em não diabéticos, não sendo possível observar um melhor quadro glicêmico nos diabéticos
Resumo:
This research evaluated the contribution of the Support Center for Family Health (SCFH) in relation to its effect on the Family Health Units through perception of the Family Health Strategy (FHS) and SCFH professionals, in addition to the satisfaction of users in relation to that role. Data were collected in the public health services of the city of Macaíba-RN in 2012, through semi-structured questionnaire and non participant systematic observation and it counted as investigated subjects 272 individuals (60 FHS professionals, 12 SCFH professionals and 200 users representatives of 20 units). For analysis of the responses of the opened questions was used categorization process and, in relation to the observational method, that was based on checking the space organization, the characteristics of the participating subjects and the specific set of activities performed by SCFH teams through an observation guide. The results point to a good acceptance of the SCFH teams role by most FHS professionals who reported active participation in the health units routine, its integration activities to the FHS teams with resolving based health promotion actions. Regarding the SCFH professionals, they also reported positive contribution by participating actively in the units routine with integrated activities to the ESF teams and developing resolute actions. For users, the SCFH brought assurance services with better access to specialized, resolving and welcoming care. Systematic observation ratified data obtained by questionnaire. It was perceived the need to implement actions related to man`s health, to invest in expanding the number of the SCFH teams, the greater supply of medications, improving the regulatory process and planning together as a key strategy to promote a more effective integration between teams SCFH / FHS
Resumo:
This work discusses the evaluation of the satisfaction of the users on the women health care focusing on the quality of the primary care in the State of Rio Grande do Norte-BR. The main objective of this research is evaluate the satisfaction of the users about the actions applied to women health in the primary health care in Rio Grande do Norte, observing the information available through the Programa de Melhoria do Acesso e da Qualidade da Atenção Básica (PMAQ-AB). The specific objectives are: the evaluation of aspects related to women health; the evaluation of the specific actions related to welcoming the pregnant and; the evaluation of the information related to the postpartum. This dissertation is characterized as an evaluative research made through a multicentric transversal study, using a quantitative approach, which is part of the External Evaluation of the PMAQ-AB in the State of Rio Grande do Norte, made by the Federal University of Rio Grande do Norte. Some secondary data of the interviews with the users who were in the Basic Health Units were used during the External Evaluation of the PMAQ-AB in Rio Grande do Norte. The sample was collected following these criteria: the users that were in the Basic Health Units to attend to any procedure; they must had used the services for at least one year; and they must had agreed to participate the research. The ones that were attending to the services for the first time and the ones that did not use the services for at least 12 months were excluded from the sample. To the data collection it was used a chart of variables/indicators with the following information to the analysis: Women Health Care, Specific Care of the Pregnant and Information about he postpartum. The descriptive analysis of the data were made through absolute and relative frequencies of the variables using the software Statistic Package for Social Sciences (SPSS) for Windows, version 22.0.0. The results show a positive picture of the satisfaction of the users about the actions of the primary healthcare in women health in the State of the Rio Grande do Norte. Another important analysis is the integration of the primary health care with other points of the Healthcare System aiming to reorient the Model of Healthcare as a starter of the access and quality of the services given to the users. Therefore, the evaluation of the satisfaction of the users in health care is essential among all the agents involved in the process of consolidation of the Unified Health System SUS. Also having the need of rethinking the professional practice, reorganizing the processes of work of the multiprofessional teams in health care, enabling financial resources, inputs and materials, planning and systematizing new actions of healthcare aiming to ensure a perfect health care to the people
Resumo:
The study aims to evaluate the quality of the work processes of the teams from the Family Health Strategy regarding the comprehensive health care for children, in the view of users in the state of Rio Grande do Norte. This is a cross-sectional observational evaluative research with quantitative approach. The primary data are part of the External Review from the Program of Improving Access and Quality of Primary Care (PMAQ) in 2012. 190 women were interviewed. The inclusion criteria was the presence in the clinic at the time of the survey, have attended the service in the last 12 months and be a mother or companion of a child up to two years old. A research protocol was developed in the dimensions of Growth and Development, Breastfeeding and nutrition, and health problems and its variables. The results revealed that mothers / companions who responded to the questionnaire 71% were aged between 18 and 35 years, 92.1% were literate, 96.3% had a monthly income and 62.6% received financial assistance from the government. As for the children, 39.4% were aged between 13 to 24 months. In promotion and prevention actions for children, 64.2% had consultation up to the 7th day of life, 91.1% underwent the screening test, 95.3% had a health handbook, 98.9% had a vaccine, 17.9% breastfed or breastfeed from 6 to 24 months. As for link and continuity of care, 86.8% of the children were accompanied by the same professional staff and 59.5% left with next consultation scheduled. In acute situations 42.4% of the children went to the health unit and 64% of these were attended. It is concluded that the actions involving prevention and health promotion of children in RN, are evaluated positively by the service users and meet the requirements of MS, as well as link and continuity of care. The weakness in access and reception of users is evident, indicating the need to adapt the service to the demand of health and planning actions to welcome all who seeks basic health unit-UBS