An increment technique for estimating growth parameters of tropical tunas, as applied to yellowfin tuna (Thunnus albacares)

ENGLISH: The rate of growth of tropical tunas has been studied by various investigators using diverse methods. Hayashi (1957) examined methods to determine the age of tunas by interpreting growth patterns on the bony or hard parts, but the results proved unreliable. Moore (1951), Hennemuth (1961), and Davidoff (1963) studied the age and growth of yellowfin tuna by the analysis of size frequency distributions. Schaefer, Chatwin and Broadhead (1961), and Fink (ms.), estimated the rate of growth of yellowfin tuna from tagging data; their estimates gave a somewhat slower rate of growth than that obtained by the study of length-frequency distributions. For the yellowfin tuna, modal groups representing age groups can be identified and followed for relatively long periods of time in length-frequency graphs. This may not be possible, however, for other tropical tunas where the modal groups may not represent identifiable age groups; this appears to be the case for skipjack tuna (Schaefer, 1962). It is necessary, therefore, to devise a method of estimating the growth rates of such species without identifying the year classes. The technique described in this study, hereafter called the "increment technique", employs the measurement of the change in length per unit of time, with respect to mean body length, without the identification of year classes. This technique is applied here as a method of estimating the growth rate of yellowfin tuna from the entire Eastern Tropical Pacific, and from the Commission's northern statistical areas (Areas 01-04 and 08) as shown in Figure 1. The growth rates of yellowfin tuna from Area 02 (Hennemuth, 1961) and from the northern areas (Davidoff, 1963) have been described by the technique of tracing modal progressions of year classes, hereafter termed the "year class technique". The growth rate analyses performed by both techniques apply to the segment of the population which is captured by tuna fishing vessels. The results obtained by both methods are compared in this report. SPANISH: La tasa del crecimiento de los atunes tropicales ha sido estudiada por varios investigadores quienes usaron diversos métodos. Hayashi (1957) examinó los métodos para determinar la edad de los atunes interpretando las marcas del crecimiento de las partes óseas o duras, pero los resultados no han demostrado eficacia. Moore (1951), Hennemuth (1961) y Davidoff (1963) estudiaron la edad y el crecimiento del atún aleta amarilla por medio del análisis de las distribuciones de la frecuencia de tamaños. Schaefer, Chatwin y Broadhead (1961) y Fink (Ms.), estimaron la tasa del crecimiento del atún aleta amarilla valiéndose de los datos de la marcación de los peces; ambos estimaron una tasa del crecimiento algo más lenta que la que se obtiene mediante el estudio de las distribuciones de la frecuencia de longitudes. Para el atún aleta amarilla, los grupos modales que representan grupos de edad pueden ser identificados y seguidos durante períodos de tiempo relativamente largos en los gráficos de la frecuencia de longitudes. Sin embargo, ésto puede no ser posible para otros atunes tropicales para los cuales los grupos modales posiblemente no representan grupos de edad identificables; este parece ser el caso para el barrilete (Schaefer, 1962). Consecuentemente, es necesario idear un método para estimar las tasas del crecimiento de las mencionadas especies sin necesidad de identificar las clases anuales. La técnica descrita en este estudio, en adelante llamada la "técnica incremental", emplea la medida del cambio en la longitud por unidad de tiempo, con respecto al promedio de la longitud corporal, sin tener que identificar las clases anuales. Esta técnica se aplica aquí como un método para estimar la tasa del crecimiento del atún aleta amarilla de todo el Pacífico Oriental Tropical, y de las áreas estadísticas norteñas de la Comisión (Areas 01-04 y 08), como se muestra en la Figura 1. Las tasas del crecimiento del atún aleta amarilla del Area 02 (Hennemuth, 1961) y de las áreas del norte (Davidoff, 1963), han sido descritas por medio de una técnica que consiste en delinear las progresiones modales de las clases anuales, en adelante llamada la "técnica de la clase anual". Los análisis de la tasa del crecimiento llevados a cabo por ambas técnicas se refieren al segmento de la población capturada por embarcaciones pesqueras de atún. Los resultados obtenidos por ambos métodos se comparan en este informe.

Modelling rail corrugation with specific track parameters focusing on ballasted track and slab track

The objective of this paper is to compare 3 types of track (high performance ballasted track, STEDEF and AFTRAV) from the corrugation growth point of view. This work has considered different vehicle speeds and track radii, and the results have taken into account the four wheels of a bogie. These tracks have been studied using Finite Elements with Nastran-Patran and RACING, a tool developed in Matlab by the authors which estimates the corrugation growth tendency. The tracks are studied using the Finite Strip Method and the Periodic Structure Theory. Lateral and vertical receptances for track and vehicle have been obtained, as well as the corrugation growth functions. In the paper the tracks are ranked according to corrugation development.

Catch-per-unit-effort and biological parameters from the Massachusetts coastal lobster (Homarus americanus) resource: Description and trends

Acomprehensive description of the Massachusetts coastal lobster (Homarus americanus) resou,rce was obtained by sampling commercial catches coastwide at sea and at dealerships between 1981 and 1986. Acommercial lobster sea-sampling program, wherein six coastal regions were sampled monthly, with an areal and temporal data weighting design, was the primary source of data. An improved index of catch per trap haul/set-over-day was generated by modeling the relationship between catch and immersion time and standardizing effort. This 6-year time-series of mean annual catch rates tracked closely the landings trend for territorial waters. During the study period there was a gradual increase in indices of exploitation and total annual mortality which corresponded to a gradual decline in mean carapace length of marketable lobster. The frequency of culls escalated from 10.0% in 1981 to 20.9% in 1986, while the percentage of lobster found dead in traps was consistently less than 1%. The sex ratio (%F:%M) was significantly different from 50:50 and approximated a 60:40 relationship during the study period. Male and female weight-length relationships were significantly different. Females weighed more than males at smaller sizes and less than males at larger sizes. A north-south clinal trend was evident wherein lobster north of Cape Cod weighed less at length than those from regions south of Cape Cod. Functional size-maturity relationships were developed for female lobster by staging cement gland development. Proportions mature at size represent more realistic values than those obtained by analyses of percent of females ovigerous. Regional variation occurred in most of the parameters studied. Three lobster groups, differing in major population descriptors, are defined by our data.(PDF file contains 28 pages.)

Effects of fundamental structure parameters on dynamic responses of submerged floating tunnel under hydrodynamic loads

This paper investigates the effects of structure parameters on dynamic responses of submerged floating tunnel (SFT) under hydrodynamic loads. The structure parameters includes buoyancy-weight ratio (BWR), stiffness coefficients of the cable systems, tunnel net buoyancy and tunnel length. First, the importance of structural damp in relation to the dynamic responses of SFT is demonstrated and the mechanism of structural damp effect is discussed. Thereafter, the fundamental structure parameters are investigated through the analysis of SFT dynamic responses under hydrodynamic loads. The results indicate that the BWR of SFT is a key structure parameter. When BWR is 1.2, there is a remarkable trend change in the vertical dynamic response of SFT under hydrodynamic loads. The results also indicate that the ratio of the tunnel net buoyancy to the cable stiffness coefficient is not a characteristic factor affecting the dynamic responses of SFT under hydrodynamic loads.

Plankton periodicity and some physicochemical parameters of the intake channel of Lake Chad

This study examines zooplankton periodicity and some physicochemical parameters of the intake channel of Lake Chad (Nigeria). Nine different zooplankton species were identified at the sampling station 1, while seven different zooplankton species were identified at the sampling station 2 (the intake channel of Lake Chad). Each identified zooplankton species was grouped according to its major group of copepods, Cladocera or Rotifera. The copepods dominated the zooplankton community with the highest numbers of occurrence as Cyclopedia species throughout the course of the study at both station l and 2. There was a clear evidence of the influence of organic manure nutrients on total zooplankton population at station 1 when compared to that of station 2. The water quality variables measured in the course of this study show that the surface water temperature in station 1 ranges from 27.5 degree C to 30.5 degree C. The pH ranges from 6.8 to 8.5, while D.O. contents ranges from 2.9mg/L to 6.1mg/L and alkalinity recorded was 172.00 to 208.00. At the station 2 the water quality parameters obtained show that surface water temperature ranges from 27.3 degree C to 30.2 degree C, pH ranges between 6.9 to 8.5, while the D.O contents ranges from 3.0 mg/L to 6.2 mg/L.Alkalinity ranges from 172mg/L to 212 mg/L

Modelling Study On The Plasma Flow and Heat Transfer In A Laminar Arc Plasma Torch Operating At Atmospheric and Reduced Pressure

A modelling study is performed to investigate the characteristics of both plasma flow and heat transfer of a laminar non-transferred arc argon plasma torch operated at atmospheric and reduced pressure. It is found that the calculated flow fields and temperature distributions are quite similar for both cases at a chamber pressure of 1.0 atm and 0.1 atm. A fully developed flow regime could be achieved in the arc constrictor-tube between the cathode and the anode of the plasma torch at 1.0 atm for all the flow rates covered in this study. However the flow field could not reach the fully developed regime at 0.1 atm with a higher flow rate. The arc-root is always attached to the torch anode surface near the upstream end of the anode, i.e. the abruptly expanded part of the torch channel, which is in consistence with experimental observation. The surrounding gas would be entrained from the torch exit into the torch interior due to a comparatively large inner diameter of the anode channel compared to that of the arc constrictor-tube.

Plume Parameters and Thruster Properties of a Low Power Arcjet

Abstract. A low power arcjet-thruster of 1 kW-class with gas mixture of H2-N2 or pure argon as the propellant is fired at a chamber pressure about 10 Pa. The nozzle temperature is detected with an infrared pyrometer; a plate set perpendicular to the plume axis and connected to a force sensor is used to measure the thrust; a probe with a tapered head is used for measuring the impact pressure in the plume flow; and a double-electrostatic probe system is applied to evaluate the electron temperature. Results indicate that the high nozzle temperature could adversely affect the conversion from enthalpy to kinetic energy. The plume flow deviates evidently from the LTE condition, and the rarefied-gas dynamic effect should be considered under the high temperature and low-pressure condition in analyzing the experimental phenomena.

The assessment of physico-chemical parameters of Shiroro Lake and its major tributaries

The physico-chemical parameters of the surface water of Shiroro Lake and its major tributaries at their entry point to the reservoir were assessed over a period of eighteen months. As in other African inland water bodies there were seasonal variations in the parameters measured. The hydrological regime of the lake, precipitation chemistry, bedrock chemistry and hydro-electric power generation influence and determine the inputs of dissolved organic carbon, nutrient levels and water quality of the lake. The added nutrients to the lake by means of the major tributary rivers and inundation of surrounding areas also influence the water quality of the lake. The wet season mean values for water and air temperature were significantly (P <0.05) higher than dry season mean values in all stations. However, for pH, Dissolved oxygen and Phosphate-phosphorus the dry season mean values were higher than wet season mean values

The relationship between some physicochemical parameters and plankton composition on fish production in ponds

The effect of physico-chemical parameters and plankton composition on fish production in ponds was investigated in six fish farms for eight weeks. The physicochemical parameters investigated were temperature=25-30 plus or minus C, transparency=0.45-0.57m, dissolved oxygen=3.0-10.9mg/l, pH=6.0-7.7, dissolved carbon dioxide=5.46-28.3mg/l, total alkalinity=44.37-80.0ppm, chemical oxygen demand=31.88-72.18mg/l and biological oxygen demand=0.66-48.34mg/l. Plankton composition varies and was made of four families of phytoplankton namely; Cyanophyceae, Chlorophyceae, Dinophyceae and Diatomida; and four families of zooplankton viz; Protozoa, Rotifera, Copepoda and Dinoflagellates. Farm 1 and 6 recorded the highest average weight of about 1.0kg and average total length of about 40.0cm for the two fish species. This study showed that fish yield was dependable on the quality and management of pond water characteristics

The relationship between some physicochemical parameters and plankton composition on fish production in ponds

The effect of physico-chemical parameters and plankton composition on fish production in ponds was investigated in six fish farms for eight weeks. The physicochemical parameters investigated were temperature=25-30 plus or minus C, transparency=0.45-0.57m, dissolved oxygen=3.0-10.9mg/l, pH=6.0-7.7, dissolved carbon dioxide=5.46-28.3mg/l, total alkalinity=44.37-80.0ppm, chemical oxygen demand=31.88-72.18mg/l and biological oxygen demand=0.66-48.34mg/l. Plankton composition varies and was made of four families of phytoplankton namely: Cyanophyceae, Chlorophyceae, Dinophyceae and Diatomida; and four families of zooplankton viz: Protozoa, Rotifera, Copepoda and Dinoflagellates. Farm 1 and 6 recorded the highest average weight of about 1.0kg and average total length of about 40.0cm for the two fish species. This study showed that fish yield was dependable on the quality and management of pond water characteristics