Dose inseminante para fertilização artificial de ovócitos de dourado

Objetivou-se determinar a dose inseminante adequada para uso na fertilização artificial de ovócitos de dourado (Salminus brasiliensis). Os ovócitos foram distribuídos em delineamento inteiramente casualizado, e fertilizados com uma das relações espermatozoides/ovócito 6,0×10³; 6,0×10(4); 6,0×10(5); 6,0×10(6) ou 3,0×10(7), cada uma com quatro repetições. Considerou-se unidade experimental uma incubadora de volume útil de 2,5 L, contendo 2,0 mL de ovócitos não-hidratados. As taxas de fertilização foram mensuradas 8 horas após o início da fertilização. Com intuito de verificar possíveis efeitos da diluição seminal na movimentação dos espermatozoides, realizou-se a mensuração do tempo de duração da motilidade espermática dos espermatozoides de dourado, ativados por meio de diferentes relações de diluição: 6,8×10-5; 6,8×10-4; 6,8×10-3; 6,8×10-2; 3,4×10-1 e 1,0 mL de sêmen por mL de água. O tempo de duração da motilidade foi avaliado em delineamento inteiramente casualizado composto de seis tratamentos e três repetições. As taxas de fertilização apresentaram relação quadrática com o número de espermatozoides por ovócito. As relações de diluição do sêmen tiveram efeito inversamente proporcional sobre a duração da motilidade espermática. A relação que proporcionou melhores taxas de fertilização artificial de ovócitos de dourado (Salminus brasiliensis) foi de 30.722 espermatozoides por ovócio.

Artificial fertilization of oocytes and sperm activation in pacu: effects of the spermatozoa:oocyte ratio, water volume, and in natura semen preservation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of the spermatozoa: oocyte ratio, water volume and water temperature on artificial fertilization and sperm activation of cascudo-preto

The objective of this study was to evaluate the effects of water volume and water temperature on the sperm motility duration and the number of spermatozoa, and the water volume on the fertilization rates of oocytes of Rhinelepis aspera. Experiments were carried out to evaluate the effect of semen dilutions (1.74×10-5, 1.74×10-4, 1.74×10-3, 1.74×10-2, 1.74×10-1 and 1.00 mL of sperm.mL-1 of water) and water temperature (5, 10, 15, 20, 25, 30, 35, 40, 45, and 50 ºC) on spermatozoa motility duration. In addition, the effects of insemination dose (7×10³, 7×10(4), 7×10(5), 7×10(6) and 7×10(7) spermatozoa.oocyte-1) and water volume (1.0, 30.0, 60.0, 90.0 and 120.0 mL water.2.0 mL-1 oocytes) on the artificial fertilization rates of oocytes were evaluated. The longest sperm motility duration were observed for the semen dilution of 1.74×10-5 mL semen.mL-1 water and in water at 5 ºC. The highest fertilization rates were obtained for insemination doses between 7.00×10³ and 1.23×10(7) spermatozoa. oocyte-1 and water volume of 28.11 mL water.2.0 mL-1 oocytes.

Florescimento e frutificação do maracujazeiro-amarelo submetido à iluminação artificial, irrigação e sombreamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização físico-química de frutos de maracujazeiro-amarelo submetidos à iluminação artificial, irrigação e sombreamento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fertility Rates Following Fixed-Time Artificial Insemination in Dairy Heifers in a Practical Progesterone-Based Protocol

Background: In bovines, more efficient management practices are important for maximizing profitability. In order to increase the pregnancy rates in artificial insemination (AI) programs, several hormonal protocols were developed to synchronize the follicular wave and the moment of ovulation in beef and dairy cattle. In dairy cattle, detection of estrus can be difficult due to a number of factors including the incidence of silent estrus. Hormonal treatments designed to control both luteal and follicular function has permitting efficient synchronizations of time of ovulation. Thus, the AI can be performed in a large number of animals on a fixed schedule without the need for detection of estrus. Using these management techniques, the fixed-time artificial insemination (TAI) can overcome the problem of accurate estrus detection and help in reducing the incidence of repeat breeding. In addition, with TAI in cattle operations, it is possible to facilitate management practices and commercialization, and to reduce the time and semen wasting with animals inseminated at incorrect times. The investigation of practical and efficient TAI protocols is important for reducing the labor and animal handling of TAI in dairy cattle, as well as for increasing the profitability of the cattle management system. This study was carried out in order to investigate the effectiveness of TAI in dairy heifers treated with a practical progesterone-based protocol.Materials, Methods & Results: This experiment was conducted at the university farm located in southwestern Brazil, during May 2009. Thirty-nine cycling crossbred dairy heifers were employed in this study. All animals received a single intramuscular injection of estradiol benzoate and intravaginal progesterone releasing device in a random stage of the estrous cycle (Day 0). on day 7 the animals were treated with PGF2a analogue and on day 9 the device was removed. Forty-eight hours after the device removal (day 11) a synthetic analogue of GnRH was administered and the animals were fixed-time artificially inseminated at the time of GnRH injection. The inseminations were performed using four different batches from the same Holstein bull. Among the heifers that were synchronized (87.2%), 30.8% ovulated until 24 h after TAI and 56.4% ovulated between 24 and 32 h after TAI. The conception rate was 61.5%. No effects of ovulation time in conception rates were detected. The conception rate from heifers that ovulated until 24 h after TAI was 58.3% and from heifers that ovulated between 24 and 32 h after TAI was 77.3%. The mean of ovulatory follicle in heifers that ovulated until 24 h was 14.3 mm and in heifers that ovulated between 24 and 32 h was 11.9 mm.Discussion: Taking together, the findings of the present study, along with those of others, emphasize the concept that development of practical methods for TAI offers significant advantages to dairy producers if conception rates are close or greater to those obtained after breeding at detected estrus. Thus, the results of the present study reinforce the possibility of making dairy cattle production more cost-effective using TAI. In conclusion, with the progesterone-based TAI protocol of the present experiment all synchronized animals ovulated up to 32 h after GnRH+TAI and no effects of ovulation time related to conception rate was detected. The exogenous control of luteal and follicular development facilitated the reproductive management and animal handling. Also, inseminating the heifers at the moment of GnRH injection in a progesterone-based TAI protocol is a practical strategy and provided satisfactory results regarding ovulation and conception rates in dairy heifers.

Crescimento, partição de fotoassimilados e produção de rizomas em taro cultivado sob sombreamento artificial

O cultivo associado é uma alternativa para culturas de ciclo longo e propriedades com limitação de área. Todavia, para o estabelecimento de associações, há necessidade de conhecer a tolerância das espécies ao sombreamento. O trabalho objetivou avaliar o crescimento de parte aérea, partição de fotoassimilados e produção de rizomas em plantas de taro 'Japonês' cultivadas sob intensidades e períodos de sombreamento artificial. Utilizou-se o delineamento de blocos ao acaso, com 13 tratamentos e quatro repetições. Os tratamentos foram constituídos de quatro intensidades de sombreamento (controle = pleno sol; 18; 30 e 50% de sombra, mantidos durante o ciclo todo), além da implementação das intensidades de sombra de 18; 30 e 50%, em três períodos (inicial = 0 a 3; intermediário = 3 a 6 e final = 6 a 9 meses). Aos 60; 90; 120; 150; 180; 210; 240 e 270 dias após o plantio (dat), avaliou-se crescimento de planta e partição de massa entre órgãos e aos 270 dat a produção de rizomas. Plantas sob sombreamento, sobretudo nas maiores intensidades e durante o ciclo todo, apresentaram maior produção de biomassa de parte aérea e de rizomas-mãe e filhos pequenos, em detrimento de rizomas-filho grandes, médios e comerciáveis. A intensidade de 18% de sombra, durante todo o ciclo ou nos períodos inicial e intermediário, foi a que menos afetou o desenvolvimento das plantas e produção de biomassa de rizomas-filho comerciáveis.

Técnicas de inteligência artificial para a geração dinâmica de set points para uma coluna de destilação

Artificial Intelligence techniques are applied to improve performance of a simulated oil distillation system. The chosen system was a debutanizer column. At this process, the feed, which comes to the column, is segmented by heating. The lightest components become steams, by forming the LPG (Liquefied Petroleum Gas). The others components, C5+, continue liquid. In the composition of the LPG, ideally, we have only propane and butanes, but, in practice, there are contaminants, for example, pentanes. The objective of this work is to control pentane amount in LPG, by means of intelligent set points (SP s) determination for PID controllers that are present in original instrumentation (regulatory control) of the column. A fuzzy system will be responsible for adjusting the SP's, driven by the comparison between the molar fraction of the pentane present in the output of the plant (LPG) and the desired amount. However, the molar fraction of pentane is difficult to measure on-line, due to constraints such as: long intervals of measurement, high reliability and low cost. Therefore, an inference system was used, based on a multilayer neural network, to infer the pentane molar fraction through secondary variables of the column. Finally, the results shown that the proposed control system were able to control the value of pentane molar fraction under different operational situations

Contribuição para o estudo do embarque de uma rede neural artificial em field programmable gate array (FPGA)

This study shows the implementation and the embedding of an Artificial Neural Network (ANN) in hardware, or in a programmable device, as a field programmable gate array (FPGA). This work allowed the exploration of different implementations, described in VHDL, of multilayer perceptrons ANN. Due to the parallelism inherent to ANNs, there are disadvantages in software implementations due to the sequential nature of the Von Neumann architectures. As an alternative to this problem, there is a hardware implementation that allows to exploit all the parallelism implicit in this model. Currently, there is an increase in use of FPGAs as a platform to implement neural networks in hardware, exploiting the high processing power, low cost, ease of programming and ability to reconfigure the circuit, allowing the network to adapt to different applications. Given this context, the aim is to develop arrays of neural networks in hardware, a flexible architecture, in which it is possible to add or remove neurons, and mainly, modify the network topology, in order to enable a modular network of fixed-point arithmetic in a FPGA. Five synthesis of VHDL descriptions were produced: two for the neuron with one or two entrances, and three different architectures of ANN. The descriptions of the used architectures became very modular, easily allowing the increase or decrease of the number of neurons. As a result, some complete neural networks were implemented in FPGA, in fixed-point arithmetic, with a high-capacity parallel processing

Uma arquitetura para sistemas supervisórios industriais e sua aplicação em processos de elevação artificial de petróleo

The using of supervision systems has become more and more essential in accessing, managing and obtaining data of industrial processes, because of constant and frequent developments in industrial automation. These supervisory systems (SCADA) have been widely used in many industrial environments to store process data and to control the processes in accordance with some adopted strategy. The SCADA s control hardware is the set of equipments that execute this work. The SCADA s supervision software accesses process data through the control hardware and shows them to the users. Currently, many industrial systems adopt supervision softwares developed by the same manufacturer of the control hardware. Usually, these softwares cannot be used with other equipments made by distinct manufacturers. This work proposes an approach for developing supervisory systems able to access process information through different control hardwares. An architecture for supervisory systems is first defined, in order to guarantee efficiency in communication and data exchange. Then, the architecture is applied in a supervisory system to monitor oil wells that use distinct control hardwares. The implementation was modeled and verified by using the formal method of the Petri networks. Finally, experimental results are presented to demonstrate the applicability of the proposed solution

Análise de desempenho da rede neural artificial do tipo multilayer perceptron na era multicore

Artificial neural networks are usually applied to solve complex problems. In problems with more complexity, by increasing the number of layers and neurons, it is possible to achieve greater functional efficiency. Nevertheless, this leads to a greater computational effort. The response time is an important factor in the decision to use neural networks in some systems. Many argue that the computational cost is higher in the training period. However, this phase is held only once. Once the network trained, it is necessary to use the existing computational resources efficiently. In the multicore era, the problem boils down to efficient use of all available processing cores. However, it is necessary to consider the overhead of parallel computing. In this sense, this paper proposes a modular structure that proved to be more suitable for parallel implementations. It is proposed to parallelize the feedforward process of an RNA-type MLP, implemented with OpenMP on a shared memory computer architecture. The research consistes on testing and analizing execution times. Speedup, efficiency and parallel scalability are analyzed. In the proposed approach, by reducing the number of connections between remote neurons, the response time of the network decreases and, consequently, so does the total execution time. The time required for communication and synchronization is directly linked to the number of remote neurons in the network, and so it is necessary to investigate which one is the best distribution of remote connections

Simulador computacional para poços de petróleo com método de elevação artificial por bombeio mecânico

This work proposes a computer simulator for sucker rod pumped vertical wells. The simulator is able to represent the dynamic behavior of the systems and the computation of several important parameters, allowing the easy visualization of several pertinent phenomena. The use of the simulator allows the execution of several tests at lower costs and shorter times, than real wells experiments. The simulation uses a model based on the dynamic behavior of the rod string. This dynamic model is represented by a second order partial differencial equation. Through this model, several common field situations can be verified. Moreover, the simulation includes 3D animations, facilitating the physical understanding of the process, due to a better visual interpretation of the phenomena. Another important characteristic is the emulation of the main sensors used in sucker rod pumping automation. The emulation of the sensors is implemented through a microcontrolled interface between the simulator and the industrial controllers. By means of this interface, the controllers interpret the simulator as a real well. A "fault module" was included in the simulator. This module incorporates the six more important faults found in sucker rod pumping. Therefore, the analysis and verification of these problems through the simulator, allows the user to identify such situations that otherwise could be observed only in the field. The simulation of these faults receives a different treatment due to the different boundary conditions imposed to the numeric solution of the problem. Possible applications of the simulator are: the design and analysis of wells, training of technicians and engineers, execution of tests in controllers and supervisory systems, and validation of control algorithms

Comportamento de chamamento de Thyrinteina arnobia (Stoll) (Lepidoptera: Geometridae) em Psidium guajava, Eucalyptus grandis e em dieta artificial

Este estudo teve como objetivos determinar e comparar o efeito de três dietas: Psidium guajava, Eucalyptus grandis e dieta artificial no comportamento de chamamento e no padrão temporal do comportamento de chamamento de fêmeas virgens de Thyrinteina arnobia (Stoll). Foram analisados os parâmetros: tempo médio para o início do chamamento, número médio de chamamento, tempo médio de cada chamamento e tempo médio total de chamamento. Os bioensaios relacionados ao comportamento de chamamento de fêmeas virgens foram realizados durante seis escotofases consecutivas e as observações tomadas a cada 5 min., a 22 ± 1ºC, 70 ± 5% de UR e 10h de escotofase. As fêmeas, independente da dieta analisada, apresentaram duas posições diferentes de chamamento. A maioria das fêmeas virgens iniciou o chamamento na 1ª hora da 1ª escotofase. O padrão de chamamento da fêmea individualizada foi característico de um padrão contínuo. O tipo de dieta oferecida na fase larval influenciou o início do comportamento de chamamento (pré-chamamento) e o tempo médio total de chamamento. O tipo de dieta também alterou a coloração da glândula de feromônio.

Sites of Defoliation by Atta sexdens rubropilosa (Hymenoptera, Formicidae) in Artificial Plants

This study aimed to achieve a better understanding about the foraging behavior of leaf-cutter ant (Atta sexdens rubropilosa Forel) workers with respect to defoliation sites in plants. To accomplish that, artificial plants 70 cm in height were prepared and divided into four levels (heights), having natural plant leaves attached to them. Evaluations during the bioassays included the number of leaves dropped by the ants, as well as the percentage of plant mass removed. In all replicates, it became evident that the most exploited plant site is the apical region, which significantly differed from other plant levels.