Diversity of Chromobacterium violaceum isolates from aquatic environments of state of Pará, Brazilian Amazon

ABSTRACT: The present study intended to characterize the phenotypic and genetic diversity of Brazilian isolates of Chromobacterium violaceum from aquatic environments within the Amazon region. Nineteen isolates showed morphological properties of C. violaceum and the majority grew at 44°C. Low temperatures, in contrast, showed to be inhibitory to their growth, as eleven isolates did not grow at 10ºC and nine did not produce pigmentation, clearly indicating an inhibition of their metabolism. The largest variation among isolates was observed in the citrate test (Simmons), in which 12 isolates were positive, and in the oxidation/fermentation of sucrose, with six positives isolates. Chloramphenicol, gentamicin and sulfonamides efficiently inhibited bacterial growth. Amplified products of the recA gene were digested with HindII or PstI, which produced three or four restriction fragments patterns, respectively. The combined analysis arranged the isolates into six genospecies. The higher diversity observed in Belém (genotypes C, D, E and F) may be a consequence of intense human occupation, pollution of the aquatic environment or due to the higher diversity of the environments sampled in that region. In conclusion, a high level of genetic and phenotypic diversity was observed, and four new genospecies were described.

Paleoambiente da formação mosquito e a implantação do sistema desértico úmido da formação corda, jurássico superior, Centro-Oeste da Bacia do Parnaíba

O Mesozóico foi marcado por mudanças geológicas significativas, decorrentes de soerguimentos resultante da orogenia Gonduanide, que possibilitou a implantação de sistemas desérticos concomitantemente com expressivos eventos magmáticos. Na Bacia do Parnaíba, Nordeste do Brasil, estes eventos estão registrados nas unidades siliciclásticas do Triássico, os arenitos da Formação Sambaíba, representadas pelos derrames basálticos e arenitos fluviais e eólicos subordinados da Formação Mosquito e pelos arenitos flúvio-eólicos da Formação Corda. O estudo de fácies e estratigráfico realizado em afloramentos e testemunhos de sondagem na região entre Formosa da Serra Negra e Montes Altos, Estado do Maranhão, possibilitou reconstituir o paleoambiente do topo da Formação Mosquito e da Formação Corda, e inferir condições paleoclimáticas para a porção centro-oeste da Bacia do Parnaíba durante o Jurássico. Foram identificadas vinte fácies sedimentares agrupadas em cinco associações de fácies (AF) representativas de uma planície vulcânica com depósitos fluviais esporádicos e arenitos eólicos subordinados (AF1-Formação Mosquito), sucedida pela instalação de um sistema desértico úmido (AF2-AF5; Formação Corda). A planície vulcânica (AF1) constitui derrames basálticos intercalados com arenitos finos a grossos (arenitos intertrap) compostos por grãos arredondados a subangulosos de quartzo, feldspatos e fragmentos de vidro vulcânico. Os arenitos apresentam estratificações plano-paralela e cruzada de baixo ângulo, preenchendo geometria de canal ou em corpos tabulares. Depósitos de canal fluvial entrelaçado (AF2) consistem em conglomerados polimíticos, com grânulos e seixos subarredondados a angulosos de basalto, e arenitos grossos com estratificação cruzada acanalada e acamamento maciço. Os lençóis arenosos (AF3) foram divididos em dois elementos arquiteturais (EA), o primeiro (EA1) consistem em arenitos finos a muitos com geometria tabular e estruturas de deformação, o segundo (EA2) é composto por arenito fino a grosso com estratificação cruzada acanalada e laminação cruzada cavalgante, gutter cast de pequeno porte. O campo de dunas (AF4) foi subdividido em dois conjuntos de fácies (C), o primeiro (CI) é caracterizado por arenitos com estratificações cruzadas tabular e tangencial de pequeno a médio porte, estratificação planoparalela e laminação cruzada cavalgante transladante subcrítica. O segundo (CII) consiste de arenitos finos a médios, moderadamente selecionados, laminação ondulada e estruturas de adesão e gretas de contração com rip-up clast, curled mud flakes, forma ciclos de raseamento centimétricos, com topo marcado por horizontes mosqueados, ricos em óxido/hidróxido de ferro, bioturbações e gretas de contração, interpretados como depósitos de interdunas úmidas. Os lobos de suspensão (AF5) consistem em arenitos finos intercalados com pelitos e arenito/pelito com estratificação cruzada complexa. A abundância de esmectita na AF4 aponta para condições de clima semiárido. No Jurássico, a região centro-oeste da Bacia do Parnaíba, foi submetida a movimentos distensivos com recorrência de derrames básicos advindos de fissuras na crosta. Durante os intervalos de aquiescência sedimentos de rios efêmeros preenchiam depressões ou espraiavam-se na planície vulcânica. O final da atividade magmática foi sucedido pela implantação do desérto Corda com campo de dunas e canais fluviais efêmeros (wadi) que retrabalharam parte da planície vulcânica e esporadicamente invadiam os lençóis arenosos. Comparado aos ergs do Permo-Triássico (Formação Sambaíba), o deserto Jurássico da Formação Corda foi mais úmido e menos extenso precedendo os sistemas fluviais e costeiros de clima mais ameno do Cretáceo da Bacia do Parnaíba.

A zona de contato entre as formações Motuca e Sambaíba, Permo-Triássico da bacia do Parnaíba, regiões de Filadélfia (TO), Riachão (MA) e Loreto (MA)

O intervalo que compreende o final do Paleozóico e início do Mesozóico foi marcado por mudanças globais paleogeográficas e paleoclimáticas, em parte atribuídas a eventos catastróficos. A intensa continentalização do supercontinente Pangéia, com a implantação de extensos desertos, sucedeu os ambientes costeiros-plataformais do início do Permiano. Os registros desses eventos no norte do Brasil são encontrados nas bacias intracratônicas, particularmente na Bacia do Parnaíba, representados pela zona de contato entre as formações Motuca e Sambaíba. A Formação Motuca é constituída predominantemente por pelitos vermelhos laminados com lentes de gipsita, calcita e marga. Na porção leste da Bacia do Parnaíba, as fácies da Formação Motuca tornam-se mais arenosas com a ocorrência expressiva de arenitos com estratificação cruzada sigmoidal. A Formação Sambaíba consiste em arenitos de coloração creme alaranjada com estratificação plano-paralela e estratificação cruzada de médio a grande porte. Em geral, o contato entre as unidades é brusco, representado pela passagem de arenitos finos com laminação cruzada cavalgante e acamamento flaser/wavy da Formação Motuca para arenitos médios com falhas/microfalhas sinsedimentares e laminações convolutas da Formação Sambaíba. Foram individualizadas 14 fácies sedimentares, agrupadas em quatro associações: AF1 – Lacustre raso / Planície de lama (mudflat), AF2 – “Panela” salina (saline pan), AF3 – Lençol de areia e AF4 – Campo de dunas. A AF1 foi depositada dominantemente por processos de decantação em um extenso ambiente lacustre raso de baixa energia, influenciado por influxos esporádicos de areias oriundos de rios efêmeros. Este sistema lacustre foi, provavelmente, influenciado por períodos de contração e expansão, devido às variações das condições climáticas predominantemente áridas. Os mais expressivos períodos de contração ocorreram na porção oeste da Bacia do Parnaíba, representados pelo desenvolvimento de planícies de lama (mudflats) associadas a lagoas efêmeras saturadas em carbonatos e a “panelas” salinas (saline pans- AF2). Os lençóis de areia (AF3) são planícies arenosas extensas, localmente com área úmidas, intensamente retrabalhadas por processos eólicos. A AF4 é interpretada como parte de um erg composto por dunas/draas em zona saturada em areia, com interdunas secas subordinadas. Intervalos deformados lateralmente contínuos por centenas de quilômetros ocorrem na zona de contato entre as formações Motuca e Sambaíba. Pelitos com camadas contorcidas e brechadas (Formação Motuca) e arenitos com falhas/microfalhas sinsedimentares, laminação convoluta e diques de injeção preenchidos por argilitos (Formação Sambaíba) são interpretados como sismitos induzidos por terremotos de alta magnitude (>8 na escala Ritcher). Anomalias geoquímicas de elementos traços como Mn, Cr, Co, Cu e Ni na zona de contato entre as formações, juntamente com a presença de micropartículas de composição metálica na matriz argilosa dos sismitos, corroboram com impactos de meteoritos no limite c, possivelmente do astroblema Riachão.

Novel technique for locating an intruder in 3D environments by using a cooperative system of multistatic radars

The aim of this work is to present a new methodology, based on vector and geometrical techniques, for determining the position of an intruder in a residence (3D problem). Initially, modifications in the electromagnetic responses of the environment, caused by movements of the trespasser, are detected. It is worth mentioning that slight movements are detected by high frequency components of the used pulse. The differences between the signals (before and after any movement) are used to define a sphere and ellipsoids, which are used for estimating the position of the invader. In this work, multiple radars are used in a cooperative manner. The multiple estimates obtained are used to determine a mean position and its standard deviation, introducing the concept of sphere of estimates. The electromagnetic simulations were performed by using the FDTD method. Results were obtained for single and double floor residences.

Large-Scale Water Productivity Assessments with MODIS Images in a Changing Semi-Arid Environment: A Brazilian Case Study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biofertilizante bovino, cobertura morta e revestimento lateral dos sulcos na produção de pimentão

The adoption of management practices that reduce water losses is essential to conserve moisture and improve soil temperature, especially in arid and semiarid environments of the Brazilian Northeast, characterized by high evapotranspiration and the adoption of irrigation with saline water, which harms growth and yield of commercial crops. Given these factories, an experiment was conducted in Nova Floresta, Paraiba, from August 2010 to February 2011 in Oxisoil, in order to evaluate the production of bell pepper and soil moisture in grooves with side trim, and application of biofertilizer and mulch cattle. The experimental design was randomized blocks with four replications using a factorial 2 x 2 x 2 for the ground beef with and without biofertilizer, with and without residues of sisal fiber (Agave sisalana), with and without the side facing the grooves, to reduce lateral water losses by infiltration of water with polyethylene plastic film. From the results, the lining of the lateral grooves provided higher values of soil moisture, number of fruits, fruit mass, plant production and productivity, bell pepper plants. It was also found that the combination of biofertilizer and mulch the ground beef remained wetter in the first 15 cm depth.

Latent heat loss and sweat gland histology of male goats in an equatorial semi-arid environment

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Gastrointestinal nematodes of the lizard Tropidurus hispidus (Squamata: Tropiduridae) from a semi-arid region of north-eastern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Spatial-temporal variation of parasites in Cnemidophorus ocellifer (Teiidae) and Tropidurus hispidus and Tropidurus semitaeniatus (Tropiduridae) from Caatinga areas in northeastern Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Information flows and environments in business contexts: the meat sector case of Salmanca/Spain

Organizational environments are related to hierarchic levels existing in a determined organization, and they influence in the formal and informal flows origin and in their monitoring and/or extinction. Informational environments are a result of organizational environments, of which focus is information and knowledge. Information flows are a fundamental element to informational environments, in a way that there´s no informational environments if there´s no information flows. Informational flows are natural reflections from their environments, in terms of content and in the way they occur. This qualitative and quantitative research was developed in three stages, in a way to allow the comprehension of the phenomena related to information and knowledge environments and information flows that occur in the meat sector from the Province of Salamanca, Spain. We used Laurence Bardin´s ‘Analysis of Content’, more specifically the ‘Categorical Analysis’ technique to data analysis. As data collection procedure we accomplished a field research, applying a questionnaire as an intentional sample of the meat industries segment from the Province of Salamanca, Spain. From data tabulation and analysis, we infer that information environments and flows are relevant to these companies business development, as well as we emphasized the need of information and knowledge management deployment, in a way to insure organizational processes quality, industrial chain production and companies competition to conquer potential markets.

Short-wave solar radiation level willingly tolerated by lactating Holstein cows in an equatorial semi-arid environment

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloys in different storage environments

Statement of problem. Removable partial dentures are affected by fatigue because of the cyclic mechanism of the masticatory system ansi frequent insertion and removal. Titanium and its alloys have been used in the manufacture of denture frameworks; however, preventive agents with fluorides are thought to attack titanium alloy surfaces.Purpose. This study evaluated, compared, analyzed the corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloy in different storage environments.Material and methods. For each metal, 33 dumbbell rods, 2.3 mm in diameter at the central segment, were cast in the Rematitan system. Corrosion-fatigue strength test was carried out through a universal testing machine with a load 30% lon er than the 0.2% offset yield strength and a combined influence of different: environments: in air at room temperature, with synthetic saliva, and with fluoride synthetic saliva. After failure, the number of cycles were recorded, and fracture surfaces were examined with on SEM.Results. ANOVA and Tukey's multiple comparison rest indicated that Ti-6Al-4V alloy achieved 21,269 cycles (SD = 8,355) against 19,157 cycles (SD = 3,624) for the commercially purr Ti. There were no significant differences between either metal in the corrosion-fatigue life for dry specimens, but when the solutions were present, the fatigue life was significantly reduced, probably because of the product-ion of corrosion pits caused by superficial reactions.

An Informatics Technical Note on Interaction of DNA - Graphene Chemical Sensor System as Reaction-Diffusion Wave-Based Computing System in Ionised Gaseous environments and their Applications Using Theoretical Studies and Scientific Computation Overview

The physics of plasmas encompasses basic problems from the universe and has assured us of promises in diverse applications to be implemented in a wider range of scientific and engineering domains, linked to most of the evolved and evolving fundamental problems. Substantial part of this domain could be described by R–D mechanisms involving two or more species (reaction–diffusion mechanisms). These could further account for the simultaneous non-linear effects of heating, diffusion and other related losses. We mention here that in laboratory scale experiments, a suitable combination of these processes is of vital importance and very much decisive to investigate and compute the net behaviour of plasmas under consideration. Plasmas are being used in the revolution of information processing, so we considered in this technical note a simple framework to discuss and pave the way for better formalisms and Informatics, dealing with diverse domains of science and technologies. The challenging and fascinating aspects of plasma physics is that it requires a great deal of insight in formulating the relevant design problems, which in turn require ingenuity and flexibility in choosing a particular set of mathematical (and/or experimental) tools to implement them.

Life-history strategies associated to reproduction of three Hyphessobrycon species (Characidae) in lentic environments of upper Paraná River basin

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessing land use by cattle in heterogeneous environments

The aim of this note is to describe preliminary results on assessment of land use by cattle, obtained in a pilot study using Geographic Information System (GIS). The research was carried out on a semi-natural pasture in Sweden, where the geographic positions of one cow were recorded during 25 consecutive days during summer. The cow, wearing a GPS collar, was integrated in a herd of 53 Hereford cattle. Each location point registered for the animal was considered as a sampling unit (N=3,097). The spatial distribution of ground declivity, water sources, cattle tracks, and classes of woody vegetation cover (forest, grassland with trees and open grassland) were recorded. The storage, processing and data analysis were carried out using the Idrisi and GS+ softwares. Three occupation zones were identified in function of the variation in the space used by the animal, which were occupied in a cyclical pattern; with the animal moving from one zone to another in cycles of five days. It was also clear that the cattle distribution in the area was neither random nor uniform, and it was affected by environmental characteristics that act as conditioners on its distribution. These preliminary results suggest that definition of zones of occupation and the environmental conditioners are promising tools to understand the land use by cattle