Quantitative and qualitative dynamics of exotic and native blowflies ( Diptera: Calliphoridae) with migrations among municipalities

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Crystallization and preliminary X-ray diffraction studies of an L-amino-acid oxidase from Lachesis muta venom

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cymbopogon martinii essential oil and geraniol at noncytotoxic concentrations exerted immunomodulatory/anti-inflammatory effects in human monocytes

ObjectivesIn traditional medicine, plants have formed the basis of sophisticated systems that have been in existence for thousands of years and still provide mankind with new remedies. Cymbopogon martinii, known as palmarosa, has been used in aromatherapy as a skin tonic due to its antimicrobial properties. It has also used in Ayurvedic medicine for skin problems and to relieve nerve pain. The immunomodulatory action of C.martinii essential oil (EO) and geraniol was evaluated regarding the production of pro- and anti-inflammatory cytokines (tumour necrosis factor (TNF)- and IL-10, respectively) by human monocytes in vitro.MethodsMonocyte cultures were incubated with EO or geraniol. After 18h, cytotoxicity assays were performed using 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide method, and cytokine production was determined by ELISA.Key findingsThe variables showed no cytotoxic effects on monocytes. TNF- production was not affected by C.martinii and geraniol, and only the concentration of 5g/ml of C.martinii stimulated its production. On the other hand, all concentrations of C.martinii and geraniol increased IL-10 production by human monocytes.ConclusionsData showed that noncytotoxic concentrations of EO and geraniol exerted an anti-inflammatory action by increasing IL-10 production; moreover, geraniol seemed to be probably responsible for EO immunomodulatory activity in our assay condition.

A simple and portable instrument for determination of captopril in pharmaceutical formulations

Objective: This article describes the application and the performance of a cheap, simple and portable device that can be used for colorimetric quantitative determination of captopril (CPT) in pharmaceutical preparations. Methods: The sensor is a light detector resistor (LDR) placed into a black PTFE cell and coupled to a low cost multimeter (Ohmmeter). The instrument has been tested and is easy and fast to use. The quantitative study is based mainly on reduction of ammonium molybdate by captopril, in the presence of sulphuric acid, producing a green-yellow compound (max 407 nm). The calibration curves were obtained by plotting the electric resistance of the LDR against the CPT concentration on the range of 4.60 x 10-4 to 1.84 x 10-3 mol l-1 with a good coefficient of determination (R2 = 0.9962). Results: Statistical analysis of the obtained results showed no significant difference between the proposed methodology and the official reported method as evident from the t-test and variance ratio at 95% confidence level. Conclusion: The results of this study demonstrate that the instrument can be used for simple, accurate, precise, fast, in situ and low-cost colorimetric analysis of captopril in pharmaceuticals products.

Sacredness of the constitutional text and interpretive heresy: the brazilian supreme court decision on same-sex unions

The paper provides a close lecture of the arguments and methods of legal construction, employed in the extensive individual opinions written by the Justices of the Brazilian Supreme Court in the case which authorized the same sex civil union. After tracing an outline of the legal problem and his possible solutions, we analyze the individual opinions, showing their methodological syncretism, the use of legal methods and arguments in a contradictory way as well the deficiencies in the reasoning. The Justices use legal arguments, but do not meet the requirements of rationality in the decision-making. We have a rhetorical attempt that aims to satisfy the public opinion than to offer a comprehensive and coherent solution according the normative elements of the Brazilian Federal Constitution of 1988.

Efeito de fontes de luz na microdureza de resinas compostas

This study assessed the surface microhardness of compound resins cured by different light sources. Methods Three micro hybrid (Vit-l-escence, Amelogen Plus, Opallis) and one nanoparticle (Filtek Z350, 3M ESPETM Dental Products, St. Paul, USA) compound resins were selected. The resins were polymerized by a halogen light unit (Ultralux, Dabi Atlante, Ribeirão Preto, Brasil) with two tips, one semi-guided made of glass and another of painted acrylic and a LED-based source (UltraLume 2, Ultradent®, South Jordan, USA). Specimens constructed from a circular aluminum matrix were photopolymerized for 40 second after they received the compound resin and stored dry for 24 hours. After this period, a Vickers surface microhardness assay was performed, measuring the top (hardness 1) and base (hardness 2) surfaces four times each. Variance analyses were complemented by Newman-Keuls method, with significance set at 5%. Results The Opallis (FGM, Santa Catarina, Brasil) resin subjected to UltraLume 2 (Ultradent®, South Jordan, USA) obtained the lowest mean hardness values for the top surface. The Vit-l-escence (Ultradent®, South Jordan, USA) compound cured by Led UltraLume 2 (Ultradent®, South Jordan, USA) and by Ultralux PCP (Dabi Atlante, Ribeirão Preto, Brasil) halogen light obtained the highest mean hardness, followed by the Filtek Z350 (3M ESPETM Dental Products, St. Paul, USA) resin subjected to UltraLume 2 (Ultradent® South Jordan, USA). The Opallis (FGM, Santa Catarina, Brasil) resin cured by LED UltraLume 2 (Ultradent®, South Jordan, USA) also obtained the lowest mean hardness for the base surface and the Vit-L-Escence (Ultradent®, South Jordan, USA) resin obtained the highest value, followed by Amelogen Plus, when cured by Ultralux (Dabi Atlante, Ribeirão Preto, Brasil) using the semi-guided tip. Conclusion The polymerization and, consequently, the microhardness achieved by the LED unit was equivalent to those achieved by conventional halogen units for three of the four composites tested.

Quantificação de parâmetros da dinâmica da bandeja do basquetebol por variáveis temporais do salto e antropométricas

The objective of this research study was quantify the power, force of vertical impulse, jumping height and the relation of the power output during the execution of the layup in basketball, by variables associated to anthropometric data. The study was carried with seven basketball players, university students, male, from the Universidade Estadual Paulista Julio Mesquita Filho (Unesp) basketball team, from Bauru City. The players were an age of 20,7 ± 2,4 years old, body weight of 77,1 ± 9,4 kg, body fat of 14,7 ± 3,6%, lean mass of 65,5 ± 6,2 kg and height of 180,0 ± 5,0 cm. Each player did the ability of the layup three times, with a previous time to adapt. The kinetic and kinematic values was obtained from the data of a system that consists of photocells and a contact carpet from a system called JumpSystemâ (CEFISE), using after that equations of UVRM and impulse. The photocells was dispose to capture the previous run-up, as well the speedy in the time of two steps of the layup, and it was also synchronized with the contact carpet in the last step, to preserve the exactly time of the propulsion of jump. In this way, the values and the kinetic variables found was vV (2,94 ± 0,3 m's-1), vH (11,3 ± 3,4 m's-1), vI (11,8 ± 3,2 m's-1), time of contact (0,214 ± 0,2 s), angle of jump (15,9 ± 6,26 graus) and H (44,3 ± 8,9 cm). The variables and the kinematic values found was FimpV (974,9 ± 119,03 N, PP (3112,9 ± 633,9 W) and PM (1556,4 ± 316,9 W). To better understand the ability of layup in basketball, as the kinetic variables, kinematic variables and anthropometrics that determine the performance, the study did correlations between dV (H) with vV, vH, vI, angle, FimpV, PP e PM; FimpV, PP e PM com with the kinetic variables of vV, vH, vI, angle, and anthropometric variables of PC and height, and correlations of PP e PM with %G and MM. So, significant results was found between the correlations of dV with FimpV (R2 = 0,81)...

Recovery of anchovy (Engraulis anchoita) and whitemouth croaker (Micropogonias furnieri) proteins by alkaline solubilisation process

The aim of this study was to evaluate the physical, chemical, and functional properties of recovered proteins of anchovy (Engraulis anchoita) and whitemouth croaker (Micropogonias furnieri) through the process of alkaline solubilisation and isoelectric precipitation, using different solubilisation (NaOH and KOH) and precipitation (HCl and H3PO4) reagents. The tests showed high protein level, and the lowest lipid reduction (94.5%) was found in the recovered protein of anchovy, the lowest yield of the process was 76.1%. The highest whiteness (78.8 and 74.2) was found in whitemouth croaker proteins. The solubilisation of the recovered protein was studied in the pH range (3, 5, 7, 9, and 11). The maximum solubility was at pHs 3 and 11 and minimum solubility was at pH 5 in the species under study.

Investigation, expression, and molecular modeling of ORF2, a metagenomic lipolytic enzyme

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological and morphometric aspects of early life stages of piabanha Brycon gouldingi (Characidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The slope of the VO2 slow component is associated with exercise intolerance during severe-intensity exercise

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Use of autogenous bone and beta-tricalcium phosphate in maxillary sinus lifting: a prospective, randomized, volumetric computed tomography study

The correction of bone defects can be performed using autogenous or alloplastic materials, such as beta-tricalcium phosphate (β-TCP). This study compared the changes in bone volume (CBV) after maxillary sinus lifting using autogenous bone (n=12), autogenous bone associated with β-TCP 1:1 (ChronOS; DePuy Synthes, Paoli, CA, USA) (n=9), and β-TCP alone (n=11) as grafting material, by means of cone beam computed tomography (CBCT). CBV was evaluated by comparing CBCT scans obtained in the immediate postoperative period (5-7 days) and at 6 months postoperative in each group using OsiriX software (OsiriX Foundation, Geneva, Switzerland). The results showed an average resorption of 45.7±18.6% for the autogenous bone group, 43.8±18.4% for the autogenous bone+β-TCP group, and 38.3±16.6% for the β-TCP group. All bone substitute materials tested in this study presented satisfactory results for maxillary sinus lifting procedures regarding the maintenance of graft volume during the healing phase before the insertion of implants, as assessed by means of CBCT.

Avaliação de colesterol e triglicerídeos séricos em cães saudáveis suplementados com ômega n-3

The analysis of serum cholesterol and triglycerides was performed in 20 healthy mongrel dogs, 10 male and 10 female, before and after supplementation for 30 days with fatty acids of long chain polyunsaturated derived from omega-3 n (497mg docosahexaenoic acid and 780mg eicosapentaenoic acid). The serum cholesterol presented a significant reduction after supplementation in both sexes (271.6±79.8mg/dL; 236,2±67,6mg/dL, before and after supplementation respectively). Regarding serum triglycerides, there was a reduction only in females (57.8±12,1mg/dL; 45.2±7,8mg/dL, before and after supplementation respectively), with no effect of supplementation in males.

Planning “Discrete” Movements Using a Continuous System: Insights from a Dynamic Field Theory of Movement Preparation

The timed-initiation paradigm developed by Ghez and colleagues (1997) has revealed two modes of motor planning: continuous and discrete. Continuous responding occurs when targets are separated by less than 60° of spatial angle, and discrete responding occurs when targets are separated by greater than 60°. Although these two modes are thought to reflect the operation of separable strategic planning systems, a new theory of movement preparation, the Dynamic Field Theory, suggests that two modes emerge flexibly from the same system. Experiment 1 replicated continuous and discrete performance using a task modified to allow for a critical test of the single system view. In Experiment 2, participants were allowed to correct their movements following movement initiation (the standard task does not allow corrections). Results showed continuous planning performance at large and small target separations. These results are consistent with the proposal that the two modes reflect the time-dependent “preshaping” of a single planning system.