Plant and invertebrate resources for farmland birds in pastoral landscapes

On 16 UK livestock holdings within pastoral landscapes, we investigated the provision of plant and invertebrate resources for farmland birds in spring barley and winter wheat cereal-based whole crop silages as alternatives to maize and grass silages. The benefits of low input barley systems were also investigated; barley fields were subjected to two separate herbicide sub-treatments on a split-field design (high input broad-spectrum or low input narrow spectrum herbicides). The abundance of plant resources and invertebrates was assessed for three growing seasons during summer and winter for each crop type. The study clearly demonstrated the value of spring barley for the provision of plant resources when compared to the other silage cropping systems, whilst invertebrate responses were variable. No differences in plant and invertebrate resources were found between the barley treatments. Throughout the year, forage maize afforded the lowest provision of resources for farmland birds, and because it is likely that maize will continue to be grown in pastoral areas, the value of this habitat needs to be improved if farmland birds are to benefit. To provide plant and invertebrate resources for farmland birds in pastoral landscapes we strongly advocate the growing of spring sown barley whole-crop silage followed by over-wintering stubbles. © 2011 Elsevier B.V. All rights reserved.

Community based ecotourism as a panacea for protected areas: the use of common property theory in its analysis and development

Tourism is the worlds largest employer, accounting for 10% of jobs worldwide (WTO, 1999). There are over 30,000 protected areas around the world, covering about 10% of the land surface(IUCN, 2002). Protected area management is moving towards a more integrated form of management, which recognises the social and economic needs of the worlds finest areas and seeks to provide long term income streams and support social cohesion through active but sustainable use of resources. Ecotourism - 'responsible travel to natural areas that conserves the environment and improves the well- being of local people' (The Ecotourism Society, 1991) - is often cited as a panacea for incorporating the principles of sustainable development in protected area management. However, few examples exist worldwide to substantiate this claim. In reality, ecotourism struggles to provide social and economic empowerment locally and fails to secure proper protection of the local and global environment. Current analysis of ecotourism provides a useful checklist of interconnected principles for more successful initiatives, but no overall framework of analysis or theory. This paper argues that applying common property theory to the application of ecotourism can help to establish more rigorous, multi-layered analysis that identifies the institutional demands of community based ecotourism (CBE). The paper draws on existing literature on ecotourism and several new case studies from developed and developing countries around the world. It focuses on the governance of CBE initiatives, particularly the interaction between local stakeholders and government and the role that third party non-governmental organisations can play in brokering appropriate institutional arrangements. The paper concludes by offering future research directions."

The division of labour under uncertainty

Reductions in the division of labour are a significant feature of modern developments in work organisation. It has been recognised that a reduced division of labour can have the advantages of job enrichment and lower coordination costs. In this paper it is shown how advantages from a lesser division of labour can stem from the flow of work between different sets of resources where the work rates of individual production stages are subject to uncertainties. Both process and project-based work are considered. Implications for the boundaries of the firm and for innovation processes are noted.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

Measuring significant variability characteristics: An assessment of three UK renewables

The variability of renewable energy is widely recognised as a challenge for integrating high levels of renewable generation into electricity systems. However, to explore its implications effectively, variability itself should first be clearly understood. This is particularly true for national electricity systems with high planned penetration of renewables and limited interconnection such as the UK. Variability cannot be considered as a distinct resource property with a single measurable parameter, but is a multi-faceted concept best described by a range of distinct characteristics. This paper identifies relevant characteristics of variability, and considers their implications for energy research. This is done through analysis of wind, solar and tidal current resources, with a primary focus on the Bristol Channel region in the UK. The relationship with electricity demand is considered, alongside the potential benefits of resource diversity. Analysis is presented in terms of persistence, distribution, frequency and correlation between supply and demand. Marked differences are seen between the behaviours of the individual resources, and these give rise to a range of different implications for system integration. Wind shows strong persistence and a useful seasonal pattern, but also a high spread in energy levels at timescales beyond one or two days. The solar resource is most closely correlated with electricity demand, but is undermined by night-time zero values and an even greater spread of monthly energy delivered than wind. In contrast, the tidal resource exhibits very low persistence, but also much greater consistency in energy values assessed across monthly time scales. Whilst this paper focuses primarily on the behaviour of resources, it is noted that discrete variability characteristics can be related to different system impacts. Persistence and predictability are relevant for system balancing, whereas statistical distribution is more relevant when exploring issues of asset utilisation and energy curtailment. Areas of further research are also identified, including the need to assess the value of predictability in relation to other characteristics.

The link between temporal attention and emotion: a playground for psychology, neuroscience, and plausible artificial neural networks

In this paper, we will address the endeavors of three disciplines, Psychology, Neuroscience, and Artificial Neural Network (ANN) modeling, in explaining how the mind perceives and attends information. More precisely, we will shed some light on the efforts to understand the allocation of attentional resources to the processing of emotional stimuli. This review aims at informing the three disciplines about converging points of their research and to provide a starting point for discussion.

Optimal sting use in the feeding behavior of the scorpion Hadrurus spadix

Since venom is costly to produce and stinging is not obligatory in prey capture for scorpions, the need to optimize use of resources suggests that venom should be reserved for prey that cannot otherwise be overpowered, (i.e., larger and/or more active prey). In accordance with these predictions, sting use by Hadrurus spadix Stahnke 1940 increased with prey size, reaching 100% once prey items were longer than the scorpion’s pedipalp patella length, and with prey activity, which we manipulated by varying prey temperature. Surprisingly, the scorpions were slower to capture less active (cooler) prey than those that exhibited higher rates of activity. We suggest this is because prey are located by vibrations in the substrate, with less active prey producing fewer vibrations. Keywords: Optimal foraging, venom, pectines

Factors influencing adoption of improved grassland management by small-scale dairy farmers in central Mexico and the implications for future research on smallholder adoption in developing countries

There have been limited recent advances in understanding of what influences uptake of innovations despite the current international focus on smallholder agriculture as a means of achieving food security and rural development. This paper provides a rigorous study of factors influencing adoption by smallholders in central Mexico and builds on findings to identify a broad approach to significantly improve research on and understanding of factors influencing adoption by smallholders in developing countries. Small-scale dairy systems play an important role in providing income, employment and nutrition in the highlands of central Mexico. A wide variety of practices and technologies have been promoted by the government public services to increase milk production and economic efficiency, but there have been very low levels of uptake of most innovations, with the exception of improving grassland through introduction of grass varieties together with management practices. A detailed study was conducted with 80 farmers who are already engaged with the use of this innovation to better understand the process of adoption and identify socioeconomic and farm variables, cognitive (beliefs), and social–psychological (social norms) factors associated with farmers' use of improved grassland. The Theory of Reasoned Action (TRA) was used as a theoretical framework and Spearman Rank Order correlation was conducted to analyse the data. Most farmers (92.5%) revealed strong intention to continue to use improved grassland (which requires active management and investment of resources) for the next 12 months; whereas 7.5% of farmers were undecided and showed weak intention, which was associated with farmers whose main income was from non-farm activities as well as with farmers who had only recently started using improved grassland. Despite farmers' experience of using improved grassland (mean of 18 years) farmers' intentions to continue to adopt it was influenced almost as much by salient referents (mainly male relatives) as by their own attitudes. The hitherto unnoticed longevity of the role social referents play in adoption decisions is an important finding and has implications for further research and for the design of extension approaches. The study demonstrates the value and importance of using TRA or TPB approaches to understand social cognitive (beliefs) and social–psychological (social norms) factors in the study of adoption. However, other factors influencing adoption processes need to be included to provide fuller understanding. An approach that would enable this, and the development of more generalisable findings than from location specific case studies, and contribute to broader conceptualisation, is proposed.

Fractional order modeling of large three-dimensional RC networks

An incidence matrix analysis is used to model a three-dimensional network consisting of resistive and capacitive elements distributed across several interconnected layers. A systematic methodology for deriving a descriptor representation of the network with random allocation of the resistors and capacitors is proposed. Using a transformation of the descriptor representation into standard state-space form, amplitude and phase admittance responses of three-dimensional random RC networks are obtained. Such networks display an emergent behavior with a characteristic Jonscher-like response over a wide range of frequencies. A model approximation study of these networks is performed to infer the admittance response using integral and fractional order models. It was found that a fractional order model with only seven parameters can accurately describe the responses of networks composed of more than 70 nodes and 200 branches with 100 resistors and 100 capacitors. The proposed analysis can be used to model charge migration in amorphous materials, which may be associated to specific macroscopic or microscopic scale fractal geometrical structures in composites displaying a viscoelastic electromechanical response, as well as to model the collective responses of processes governed by random events described using statistical mechanics.

The effect of class size on student achievement: evidence from Bangladesh

This study examines the effect of class size on student achievement in Bangladesh using national secondary school survey data. A Ministry of Education rule regarding allocation of teachers to secondary grades is exploited to construct an instrument for class size. This rule causes a discontinuity between grade enrolment and class size thereby generating exogenous variation in the latter. It is found that OLS and IV estimates of class size effects have perverse signs: both yield a positive coefficient on the class size variable. The results suggest that reduction in class size in secondary grades is not efficient in a developing country like Bangladesh. Last, as by-product, some evidence is found suggesting that greater competition among schools improve student achievement.

Contributions of roots and rootstocks to sustainable, intensified crop production

Sustainable intensification is seen as the main route for meeting the world’s increasing demands for food and fibre. As demands mount for greater efficiency in the use of resources to achieve this goal, so the focus on roots and rootstocks and their role in acquiring water and nutrients, and overcoming pests and pathogens, is increasing. The purpose of this review is to explore some of the ways in which understanding root systems and their interactions with soils could contribute to the development of more sustainable systems of intensive production. Physical interactions with soil particles limit root growth if soils are dense, but root–soil contact is essential for optimal growth and uptake of water and nutrients. X-ray microtomography demonstrated that maize roots elongated more rapidly with increasing root–soil contact, as long as mechanical impedance was not limiting root elongation, while lupin was less sensitive to changes in root–soil contact. In addition to selecting for root architecture and rhizosphere properties, the growth of many plants in cultivated systems is profoundly affected by selection of an appropriate rootstock. Several mechanisms for scion control by rootstocks have been suggested, but the causal signals are still uncertain and may differ between crop species. Linkage map locations for quantitative trait loci for disease resistance and other traits of interest in rootstock breeding are becoming available. Designing root systems and rootstocks for specific environments is becoming a feasible target.

The dilemma of scope and scale for construction professional service firms

Construction professional service (CPS) firms sell expertise and provide innovative solutions for projects founded on their knowledge, experience, and technical competences. Large CPS firms seeking to grow will often seek new opportunities in their domestic market and overseas by organic or inorganic growth through mergers, alliances, and acquisitions. Growth can also come from increasing market penetration through vertical, horizontal, and lateral diversification. Such growth, hopefully, leads to economies of scope and scale in the long term, but it can also lead to diseconomies, when the added cost of integration and the increased complexity of diversification no longer create tangible and intangible benefits. The aim of this research is to investigate the key influences impacting on the growth in scope and scale for large CPS firms. Qualitative data from the interviews were underpinned by secondary data from CPS firms’ annual reports and analysts’ findings. The findings showed five key influences on the scope and scale of a CPS firm: the importance of growth as a driver; the influence of the ownership of the firm on the decision for growth in scope and scale; the optimization of resources and capabilities; the need to serve changing clients’ needs; and the importance of localization. The research provides valuable insights into the growth strategies of international CPS firms. A major finding of the research is the influence of ownership on CPS firms’ growth strategies which has not been highlighted in previous research.

HMEF: framework to evaluate merging of Higher Education Institutions – application of Enterprise Architecture

Mergers of Higher Education Institutions (HEIs) are organisational processes requiring tremendous amount of resources, in terms of time, work, and money. A number of mergers have been seen on previous years and more are to come. Several studies on mergers have been conducted, revealing some crucial factors that affect the success of mergers. Based on literature review on these studies, factors are: the initiator of merger, a reason for merger, geographical distance of merging institutions, organisational culture, the extend of overlapping course portfolio, and Quality Assurance Systems (QASs). Usually these kind of factors are not considered on mergers, but focus is on financial matters. In this paper, a framework (HMEF) for evaluating merging of HEIs is introduced. HMEF is based on Enterprise Architecture (EA), focusing on factors found to be affecting the success of mergers. By using HMEF, HEIs can focus on matters that crucial for merging.

Data stream mining in ubiquitous environments: state-of-the-art and current directions

In this article, we review the state-of-the-art techniques in mining data streams for mobile and ubiquitous environments. We start the review with a concise background of data stream processing, presenting the building blocks for mining data streams. In a wide range of applications, data streams are required to be processed on small ubiquitous devices like smartphones and sensor devices. Mobile and ubiquitous data mining target these applications with tailored techniques and approaches addressing scarcity of resources and mobility issues. Two categories can be identified for mobile and ubiquitous mining of streaming data: single-node and distributed. This survey will cover both categories. Mining mobile and ubiquitous data require algorithms with the ability to monitor and adapt the working conditions to the available computational resources. We identify the key characteristics of these algorithms and present illustrative applications. Distributed data stream mining in the mobile environment is then discussed, presenting the Pocket Data Mining framework. Mobility of users stimulates the adoption of context-awareness in this area of research. Context-awareness and collaboration are discussed in the Collaborative Data Stream Mining, where agents share knowledge to learn adaptive accurate models.

Effects of the 5-HT(1A) agonist (+/-)-8-hydroxy-2-(di-n-propylamino)tetralin (8-OH-DPAT) on cocaine choice in cynomolgus monkeys

Drugs that alter brain serotonin (5-HT) function can modulate the behavioral effects of cocaine, but the underlying receptor mechanisms are poorly understood. The present study examined the effects of the selective 5-HT1A receptor agonist (+/-)-8-hydroxy-2-(di-n-propylamino)tetralin (8-OH-DPAT, 0.01-0.1 mg/kg, i.v.) on cocaine self-administration in the context of a choice procedure. Five adult male cynomolgus monkeys self-administered cocaine (saline, 0.003-0.03 mg/kg per injection) under a concurrent fixed-ratio 50 schedule of food (1-g banana-flavored pellets) and cocaine presentation. Allocation of responses to the cocaine-associated lever (cocaine choice) increased in a dose-related manner from < or =20% of total responses when saline or 0.003 mg/kg per injection cocaine was the alternative to food to > or =75% when 0.03 mg/kg per injection cocaine was available. In four of five monkeys, when choice was between a low cocaine dose and food, 0.01 mg/kg 8-OH-DPAT increased injection-lever responding. At cocaine doses which occasioned > or =75% cocaine choice, 8-OH-DPAT did not alter response allocation. In the fifth monkey, 8-OH-DPAT only decreased injection-lever responding. When choice was between saline and food, 8-OH-DPAT did not reliably shift responding to the injection lever, except at doses that disrupted operant performance. These results suggest that a 5-HT1A receptor agonist can increase the reinforcing strength of a low cocaine dose relative to a concurrently available non-drug reinforcer.