Effect of fruit and vegetable consumption on immune function in older people: A randomized controlled trial

Background: Fruit and vegetable (FV) intake, which is often low in older people, is associated with reduced chronic disease risk. Objective: We determined whether increased FV intake improves measures of immune function. Design: We conducted a randomized controlled trial (The Ageing and Dietary Intervention Trial) in 83 healthy volunteers aged 65-85 y with low FV intakes (=2 portions/d); 82 subjects completed the intervention. Participants were assigned to continue their normal diets or to consume =5 FV portions/d for 16 wk. At 12 wk, tetanus toxoid (0.5 mL intramuscular) and Pneumovax II vaccine (0.5 mL intramuscular; both vaccines from Sanofi Pasteur) were administered. FV intake was monitored by using diet histories, and biomarkers of nutritional status were assessed. The primary endpoint was the antibody response to vaccination. Specific antibodies binding to tetanus toxoid (total IgG) and pneumococcal capsular polysaccharide (total IgG and IgG2) were assessed at baseline and 16 wk. Participants were recruited between October 2006 and June 2008. Results: The change in FV consumption differed significantly between groups [mean change in number of portions (95% CI): in the 2-portion/d group, 0.4 portions/d (0.2, 0.7 portions/d); in the 5-portion/d group, 4.6 portions/d (4.1, 5.0 portions/d); P < 0.001)] and also in micronutrient status. Antibody binding to pneumococcal capsular polysaccharide (total IgG) increased more in the 5-portion/d group than in the 2-portion/d group [geometric mean (95% CI) of the week 16:baseline ratio: 3.1 (2.1, 4.4) and 1.7 (1.3, 2.1), respectively; P = 0.005)]. There was no significant difference in the increases in antibody binding to tetanus toxoid. Conclusion: Increased FV intake improves the Pneumovax II vaccination antibody response in older people, which links an achievable dietary goal with improved immune function. This trial was registered at clinicaltrials.gov as NCT00858728. © 2012 American Society for Nutrition.

Breast Cancer Risk in Relation to Occupations with Exposure to Carcinogens and Endocrine Disruptors:a Canadian Case-Control Study

Background

Endocrine disrupting chemicals and carcinogens, some of which may not yet have been classified as such, are present in many occupational environments and could increase breast cancer risk. Prior research has identified associations with breast cancer and work in agricultural and industrial settings. The purpose of this study was to further characterize possible links between breast cancer risk and occupation, particularly in farming and manufacturing, as well as to examine the impacts of early agricultural exposures, and exposure effects that are specific to the endocrine receptor status of tumours.

Methods

1005 breast cancer cases referred by a regional cancer center and 1147 randomly-selected community controls provided detailed data including occupational and reproductive histories. All reported jobs were industry- and occupation-coded for the construction of cumulative exposure metrics representing likely exposure to carcinogens and endocrine disruptors. In a frequency-matched case?control design, exposure effects were estimated using conditional logistic regression.

Results

Across all sectors, women in jobs with potentially high exposures to carcinogens and endocrine disruptors had elevated breast cancer risk (OR = 1.42; 95% CI, 1.18-1.73, for 10 years exposure duration). Specific sectors with elevated risk included: agriculture (OR = 1.36; 95% CI, 1.01-1.82); bars-gambling (OR = 2.28; 95% CI, 0.94-5.53); automotive plastics manufacturing (OR = 2.68; 95% CI, 1.47-4.88), food canning (OR = 2.35; 95% CI, 1.00-5.53), and metalworking (OR = 1.73; 95% CI, 1.02-2.92). Estrogen receptor status of tumors with elevated risk differed by occupational grouping. Premenopausal breast cancer risk was highest for automotive plastics (OR = 4.76; 95% CI, 1.58-14.4) and food canning (OR = 5.70; 95% CI, 1.03-31.5).

Conclusions

These observations support hypotheses linking breast cancer risk and exposures likely to include carcinogens and endocrine disruptors, and demonstrate the value of detailed work histories in environmental and occupational epidemiology.

Stress, Positive Psychology and the National Student Survey

The aim was to explore the predictive ability of sources of stress and a range of dispositional and coping behaviours on student satisfaction and motivation. Most research exploring sources of stress and coping in students construes stress as psychological distress, with little attempt to consider positive experiences of stress. A questionnaire was administered to 120 first-year UK psychology students. Questions were asked which measured sources of stress when rated as likely to contribute to distress (a hassle) and likely to help one achieve (an uplift). The sources of stress were amended from the UK National Student Survey (NSS, 2011). Support, control, self-efficacy, personality and coping style were also measured, along with their potential affect on
course satisfaction, motivation and feeling part of a learning community. The sources of stress likely to lead to distress were more often significant than sources of stress likely to lead to positive, eustress states. Ironically,
factors one would consider would help students, such as the university support facilities, only did so when rated as a hassle, not as an uplift. Published university league tables draw heavily on student course satisfaction but this negatively correlated with intellectual motivation and feeling part of a learning
community. This suggests course satisfaction alone reveals an incomplete picture of the student experience. Course educators need to consider how course experiences contribute not just to potential distress but to
potential eustress. Teaching quality, effective support and work-life balance are key to student satisfaction and motivation. How educators interact with their students and the opportunities they create in and outside the class to promote peer support are likely to enhance satisfaction and motivation.

Genetic variability evaluation in a Moroccan collection of barley, Hordeum vulgare L., by means of storage proteins and RAPDS

The genetic variation existing in a set of barley (Hordeum vulgare L.) landrace samples recently collected in Morocco was estimated. Two kinds of genetic markers, seed storage proteins (hordeins) and random amplified polymorphic DNA (RAPD), were used. Only six out of 31 landraces were subjected to RAPD analysis. Both kinds of markers, RAPD and storage proteins, yielded similar results, showing that the level of variation observed in Moroccan barley was high: all landraces showed variability; 808 different storage protein patterns (multilocus associations) were observed among 1897 individuals (2.32 seeds per association, on average) with an average of 43 multilocus associations per accession. In general, genetic variation within accessions was higher than between accessions. The 100 polymorphic RAPD bands generated by 21 effective primers were able to generate enough patterns to differentiate between uniform cultivars and even between individuals in variable accessions. One of the aims of this work was to compare the effectiveness of RAPD versus storage protein techniques in assessing the variability of genetic resource collections. On average hordeins were more polymorphic than RAPDs: they showed more alternatives per band on gels and a higher percentage of polymorphic bands, although RAPDs supply a higher number of bands. Although RAPD is an easy and standard technique, storage protein analysis is technically easier, cheaper and needs less sophisticated equipment. Thus, when resources are a limiting factor and considering the cost of consumables and work time, seed storage proteins must be the technique of choice for a first estimation of genetic variation in plant genetic resource collections.

The ageing behaviour of hydrogenated nitrile butadiene rubber/nanoclay nanocomposites in various mediums

Hydrogenated nitrile butadiene rubber (HNBR) nanocomposites were prepared using commercially available organoclays (Cloisite 15A). The main focus of the current investigation is to study the influence of the organoclay reinforced in HNBR after subjecting it to long-term oxidative ageing and immersion studies. All the different nanoclay nanocomposites were air aged for a period of 168 h and at 150°C. The changes in the mechanical properties such as tensile strength and elongation at break have been compared with respect to the control sample. For immersion tests, three different liquid mediums were considered for this current investigation. All the samples were immersed in different mediums for a period of 168 h at 150°C. The changes in the swelling index and the mechanical properties have been reported with respect to the control sample. After reinforcing nanoclays into HNBR there was good resistance to swelling in all the three different liquid mediums in comparison to control sample. Tensile testing was performed on the immersed nanocomposites to evaluate the mechanical behaviour after immersion studies. A probable mechanism behind the improved performance has been suggested. © The Author(s) 2012.

Serum amyloid A-related inflammation is lowered by increased fruit and vegetable intake, while high-sensitive C-reactive protein, IL-6 and E-selectin remain unresponsive

The present study assessed whether increased fruit and vegetable (F&V) intake reduced the concentrations of the inflammatory marker serum amyloid A (SAA) in serum, HDL2 and HDL3 and whether the latter reduction influenced any of the functional properties of these HDL subfractions. The present study utilised samples from two previous studies: (1) the FAVRIT (Fruit and Vegetable Randomised Intervention Trial) study - hypertensive subjects (systolic blood pressure (BP) range 140-190 mmHg; diastolic BP range 90-110 mmHg) were randomised to receive a 1-, 3- or 6-portion F&V/d intervention for 8 weeks, and (2) the ADIT (Ageing and Dietary Intervention Trial) study - older subjects (65-85 years) were randomised to receive a 2- or 5-portion F&V/d intervention for 16 weeks. HDL2 and HDL3 were isolated by rapid ultracentrifugation. Measurements included the following: serum high-sensitive C-reactive protein (hsCRP) by an immunoturbidimetric assay; serum IL-6 and E-selectin and serum-, HDL2- and HDL3-SAA by ELISA procedures; serum-, HDL2- and HDL3-cholesterol ester transfer protein (CETP) activity by a fluorometric assay. Although the concentrations of hsCRP, IL-6 and E-selectin were unaffected by increasing F&V intake in both studies (P>0·05 for all comparisons), those of SAA in HDL3 decreased in the FAVRIT cohort (P= 0·049) and those in HDL2 and HDL3 decreased in the ADIT cohort (P= 0·035 and 0·032), which was accompanied by a decrease in the activity of CETP in HDL3 in the FAVRIT cohort (P= 0·010) and in HDL2 in the ADIT cohort (P= 0·030). These results indicate that SAA responds to increased F&V intake, while other inflammatory markers remain unresponsive, and this leads to changes in HDL2 and HDL3, which may influence their antiatherogenic potential. Overall, the present study provides tangible evidence of the effectiveness of increased F&V intake, which may be of use to health policy makers and the general public.

Advanced Ceramic Substrate with Ordered and Designed Micro-Structure for Applications in Automotive Catalysts

This study describes an innovative monolith structure designed for applications in automotive catalysis using an advanced manufacturing approach developed at Imperial College London. The production process combines extrusion with phase inversion of a ceramic-polymer-solvent mixture in order to design highly ordered substrate micro-structures that offer improvements in performance, including reduced PGM loading, reduced catalyst ageing and reduced backpressure.

This study compares the performance of the novel substrate for CO oxidation against commercially available 400 cpsi and 900 cpsi catalysts using gas concentrations and a flow rate equivalent to those experienced by a full catalyst brick when attached to a vehicle. Due to the novel micro-structure, no washcoat was required for the initial testing and 13 g/ft3 of Pd was deposited directly throughout the substrate structure in the absence of a washcoat.

Initial results for CO oxidation indicate that the advanced micro-structure leads to enhanced conversion efficiency. Despite an 79% reduction in metal loading and the absence of a washcoat, the novel substrate sample performs well, with a light-off temperature (LOT) only 15 °C higher than the commercial 400 cpsi sample.

To test the effects of catalyst ageing on light-off temperature, each sample was aged statically at a temperature of 1000 °C, based on the Bench Ageing Time (BAT) equation. The novel substrate performed impressively when compared to the commercial samples, with a variation in light-off temperature of only 3% after 80 equivalent hours of ageing, compared to 12% and 25% for the 400 cpsi and 900 cpsi monoliths, respectively.

Gender Equality Acts - Federal and States (Germany):a practical commentary

This book provides a systematic introduction in the German gender equality acts for public services, and also a section per section commentary for each individual act. It analyses the legal base, limits and scope of the so called women's quota, gender mainstreaming in public employment and public policy, provisions to allow conciliation of paid work and work in families and the position of women's equality officers. It compares and analyses 16 state acts and the federal equality act. The introductory chapter, written by Dagmar Schiek, also provides an analysis of the EU level and constitutional frame for this legislation. The combination of a systematic introduction and a section by section commentary ensures that this valuable handbook can be used by trained lawyers as well as by social scientists, taking into account the fact that many equality officers are not trained lawyers.

The Vertical Distribution and Evolution of Slam Pressure on an Oscillating Wave Surge Converter

The accurate definition of the extreme wave loads which act on offshore structures represents a significant challenge for design engineers and even with decades of empirical data to base designs upon there are still failures attributed to wave loading. The environmental conditions which cause these loads are infrequent and highly non-linear which means that they are not well understood or simple to describe. If the structure is large enough to affect the incident wave significantly further non-linear effects can influence the loading. Moreover if the structure is floating and excited by the wave field then its responses, which are also likely to be highly non-linear, must be included in the analysis. This makes the description of the loading on such a structure difficult to determine and the design codes will often suggest employing various tools including small scale experiments, numerical and analytical methods, as well as empirical data if available.
Wave Energy Converters (WECs) are a new class of offshore structure which pose new design challenges, lacking the design codes and empirical data found in other industries. These machines are located in highly exposed and energetic sites, designed to be excited by the waves and will be expected to withstand extreme conditions over their 25 year design life. One such WEC is being developed by Aquamarine Power Ltd and is called Oyster. Oyster is a buoyant flap which is hinged close to the seabed, in water depths of 10 to 15m, piercing the water surface. The flap is driven back and forth by the action of the waves and this mechanical energy is then converted to electricity.
It has been identified in previous experiments that Oyster is not only subject to wave impacts but it occasionally slams into the water surface with high angular velocity. This slamming effect has been identified as an extreme load case and work is ongoing to describe it in terms of the pressure exerted on the outer skin and the transfer of this short duration impulsive load through various parts of the structure.
This paper describes a series of 40th scale experiments undertaken to investigate the pressure on the face of the flap during the slamming event. A vertical array of pressure sensors are used to measure the pressure exerted on the flap. Characteristics of the slam pressure such as the rise time, magnitude, spatial distribution and temporal evolution are revealed. Similarities are drawn between this slamming phenomenon and the classical water entry problems, such as ship hull slamming. With this similitude identified, common analytical tools are used to predict the slam pressure which is compared to that measured in the experiment.

Farming, identity and well-being: managing changing gender roles within Western European farm families

This article is concerned with how men and women on farms socially construct their gender and work identities through interaction with each other and public representations of themselves. It is argued that identity is a process, and like gender, it is socially constructed through ‘doing’ identity.
Farming has changed tremendously over the last forty years in Europe. The position of women in the labour market and on the family farm has also undergone significant changes. In Western Europe, women in general and women on family farms are more likely to be active in the labour market than they were forty years ago. While it remains the case that all of their labour on the farm is not properly recorded, they now also have visible, paid employment. Scholars have been surprised that farm women’s gender identity has not changed more significantly with this changed labour market presence. This article argues that in order to understand this limited change we need to understand how men and women in family farms verify and reinforce farming work identities and farming gender identities. It is argued that while off-farm work does not ‘look’ like gender deviant work, it is because it questions the male breadwinner role. An analysis of this helps us understand why the discourse of the family farm remains so dominant and so persistent. In 2012 and 2013, a qualitative study was undertaken in Northern Ireland to examine the gender implications of the EU rural development programme on farms and rural areas. Some of the data gathered as part of this study is interpreted to shed light on how and why particular work and gender identities are constructed within the farm family.

The Role of Peptidyl Prolyl Isomerases in Aging and Vascular Diseases

Peptidyl prolyl isomerases (PPIases) are proteins belonging to the immunophilin family and are characterised by their cis-trans isomerization activity at the X-Pro peptide bond, in addition to their tetratricopeptide repeat (TPR) domain, important for interaction with the molecular chaperone, Hsp90. Due to this unique structure these proteins are able to facilitate protein-protein interactions which can impact significantly on a range of cellular processes such as cell signalling, differentiation, cell cycle progression, metabolic activity and apoptosis. Malfunction and/or dysregulation of most members of this class of proteins promotes cellular damage and tissue/organ failure, predisposing to ageing and age-related diseases. Many individual genes within the PPIase family are associated with several age-related diseases including cardiovascular diseases (CVDs), atherosclerosis, type II diabetes (T2D), chronic kidney disease (CDK), neurodegeneration, cancer and age-related macular degeneration (AMD), in addition to the ageing process itself. This review will focus on the different roles of PPIases, and their therapeutic/biomarker potential in these age-related vascular diseases.

The paternal genome and the health of the assisted reproductive technology child

As a number of children born by assisted reproductive technology (ART) are increasing each year across the developed world, the health of such offspring is a matter of public concern. Does the integrity of the paternal genome impact on offspring health? In societal terms, as birth rates fall, and the Western population become unsustainable, do the benefits outweigh the costs of creating and providing for this ART conceived sub population? There are little data to date to answer these questions. The long‑term health of such children has largely been ignored, and success measured only by early (pre-birth) outcomes such as embryo quality or pregnancy. However, there are powerful paradigms such as ageing and smoking that give vital clues as to the potential impact of unhealthy spermatozoa on disease risk, mental and physical health, fertility and mortality of these offspring.

Molecular pedigree reconstruction and estimation of evolutionary parameters in a wild Atlantic salmon river system with incomplete sampling: a power analysis

Background: Pedigree reconstruction using genetic analysis provides a useful means to estimate fundamental population biology parameters relating to population demography, trait heritability and individual fitness when combined with other sources of data. However, there remain limitations to pedigree reconstruction in wild populations, particularly in systems where parent-offspring relationships cannot be directly observed, there is incomplete sampling of individuals, or molecular parentage inference relies on low quality DNA from archived material. While much can still be inferred from incomplete or sparse pedigrees, it is crucial to evaluate the quality and power of available genetic information a priori to testing specific biological hypotheses. Here, we used microsatellite markers to reconstruct a multi-generation pedigree of wild Atlantic salmon (Salmo salar L.) using archived scale samples collected with a total trapping system within a river over a 10 year period. Using a simulation-based approach, we determined the optimal microsatellite marker number for accurate parentage assignment, and evaluated the power of the resulting partial pedigree to investigate important evolutionary and quantitative genetic characteristics of salmon in the system.

Results: We show that at least 20 microsatellites (ave. 12 alleles/locus) are required to maximise parentage assignment and to improve the power to estimate reproductive success and heritability in this study system. We also show that 1.5 fold differences can be detected between groups simulated to have differing reproductive success, and that it is possible to detect moderate heritability values for continuous traits (h(2) similar to 0.40) with more than 80% power when using 28 moderately to highly polymorphic markers.

Conclusion: The methodologies and work flow described provide a robust approach for evaluating archived samples for pedigree-based research, even where only a proportion of the total population is sampled. The results demonstrate the feasibility of pedigree-based studies to address challenging ecological and evolutionary questions in free-living populations, where genealogies can be traced only using molecular tools, and that significant increases in pedigree assignment power can be achieved by using higher numbers of markers.