Acoustic Structure Interaction For Floating Structure Under Moving Load

The present thesis concentrates largely on sound radiation from floating structure due to moving load

RMAC-M: Extending the R-MAC Protocol for an Energy Efficient, Delay Tolerant Underwater Acoustic Sensor Network application with a mobile data mule node

One of the major applications of underwater acoustic sensor networks (UWASN) is ocean environment monitoring. Employing data mules is an energy efficient way of data collection from the underwater sensor nodes in such a network. A data mule node such as an autonomous underwater vehicle (AUV) periodically visits the stationary nodes to download data. By conserving the power required for data transmission over long distances to a remote data sink, this approach extends the network life time. In this paper we propose a new MAC protocol to support a single mobile data mule node to collect the data sensed by the sensor nodes in periodic runs through the network. In this approach, the nodes need to perform only short distance, single hop transmission to the data mule. The protocol design discussed in this paper is motivated to support such an application. The proposed protocol is a hybrid protocol, which employs a combination of schedule based access among the stationary nodes along with handshake based access to support mobile data mules. The new protocol, RMAC-M is developed as an extension to the energy efficient MAC protocol R-MAC by extending the slot time of R-MAC to include a contention part for a hand shake based data transfer. The mobile node makes use of a beacon to signal its presence to all the nearby nodes, which can then hand-shake with the mobile node for data transfer. Simulation results show that the new protocol provides efficient support for a mobile data mule node while preserving the advantages of R-MAC such as energy efficiency and fairness.

Development & evaluation of different acoustic models for Malayalam continuous speech recognition

Performance of any continuous speech recognition system is dependent on the accuracy of its acoustic model. Hence, preparation of a robust and accurate acoustic model lead to satisfactory recognition performance for a speech recognizer. In acoustic modeling of phonetic unit, context information is of prime importance as the phonemes are found to vary according to the place of occurrence in a word. In this paper we compare and evaluate the effect of context dependent tied (CD tied) models, context dependent (CD) and context independent (CI) models in the perspective of continuous speech recognition of Malayalam language. The database for the speech recognition system has utterance from 21 speakers including 11 female and 10 males. Our evaluation results show that CD tied models outperforms CI models over 21%.

Evaluation of a.c. conductivity of rubber ferrite composites from dielectric measurements

The effect of frequency, composition and temperature on the a.c. electrical conductivity were studied for the ceramic, Ni1–xZnxFe2O4, as well as the filler (Ni1–xZnxFe2O4) incorporated rubber ferrite composites (RFCs). Ni1–xZnxFe2O4 (where x varies from 0 to 1 in steps of 0×2) were prepared by usual ceramic techniques. They were then incorporated into a butyl rubber matrix according to a specific recipe. The a.c. electrical conductivity (sa.c.) calculations were carried out by using the data available from dielectric measurements and by employing a simple relationship. The a.c. conductivity values were found to be of the order of 10–3 S/m. Analysis of the results shows that sa.c. increases with increase of frequency and the change is same for both ceramic Ni1–xZnxFe2O4 and RFCs. sa.c. increases initially with the increase of zinc content and then decreases with increase of zinc. Same behaviour is observed for RFCs too. The dependence of sa.c. on the volume fraction of the magnetic filler was also studied and it was found that the a.c. conductivity of RFCs increases with increase of volume fraction of the magnetic filler. Temperature dependence of conductivity was studied for both ceramic and rubber ferrite composites. Conductivity shows a linear dependence with temperature in the case of ceramic samples

Jitter measurements for Performance enhancement in the Service Sector

In a leading service economy like India, services lie at the very center of economic activity. Competitive organizations now look not only at the skills and knowledge, but also at the behavior required by an employee to be successful on the job. Emotionally competent employees can effectively deal with occupational stress and maintain psychological well-being. This study explores the scope of the first two formants and jitter to assess seven common emotional states present in the natural speech in English. The k-means method was used to classify emotional speech as neutral, happy, surprised, angry, disgusted and sad. The accuracy of classification obtained using raw jitter was more than 65 percent for happy and sad but less accurate for the others. The overall classification accuracy was 72% in the case of preprocessed jitter. The experimental study was done on 1664 English utterances of 6 females. This is a simple, interesting and more proactive method for employees from varied backgrounds to become aware of their own communication styles as well as that of their colleagues' and customers and is therefore socially beneficial. It is a cheap method also as it requires only a computer. Since knowledge of sophisticated software or signal processing is not necessary, it is easy to analyze

Destructive and non-destructive measurements of residual crop residue and phosphorus effects on growth and composition of herbaceous fallow species in the Sahel

Little is known about the residual effects of crop residue (CR) and phosphorus (P) application on the fallow vegetation following repeated cultivation of pearl millet [Pennisetum glaucum (L.) R. Br.] in the Sahel. The objective of this study, therefore, was (i) to measure residual effects of CR, mulched at annual rates of 0, 500, 1000 and 2000 kg CR ha^-1, broadcast P at 0 and 13 kg P ha^-1 and P placement at 0, 1, 3, 5 and 7 kg P ha^-1 on the herbaceous dry matter (HDM) 2 years after the end of the experiment and (ii) to test a remote sensing method for the quantitative estimation of HDM. Compared with unmulched plots, a doubling of HDM was measured in plots that had received at least 500 kg CR ha^-1. Previous broadcast P application led to HDM increases of 14% compared with unfertilised control plots, whereas no residual effects of P placement were detected. Crop residue and P treatments caused significant shifts in flora composition. Digital analysis of colour photographs taken of the fallow vegetation and the bare soil revealed that the number of normalised green band pixels averaged per plot was highly correlated with HDM (r=0.86) and that red band pixels were related to differences in soil surface crusting. Given the traditional use of fallow vegetation as fodder, the results strongly suggest that for the integrated farming systems of the West African Sahel, residual effects of soil amendments on the fallow vegetation should be included in any comprehensive analysis of treatment effects on the agro-pastoral system.

Field measurements of the CO2 evolution rate under different crops during an irrigation cycle in a mountain oasis of Oman

For millennia oasis agriculture has been the backbone of rural livelihood in the desertic Sultanate of Oman. However, little is known about the functioning of these oasis systems, in particular with respect to the C turnover. The objective was to determine the effects of crop, i.e. alfalfa, wheat and bare fallow on the CO2 evolution rate during an irrigation cycle in relation to changes in soil water content and soil temperature. The gravimetric soil water content decreased from initially 24% to approximately 16% within 7 days after irrigation. The mean CO2 evolution rates increased significantly in the order fallow (27.4 mg C m^−2 h^−1) < wheat (45.5 mg C m^−2 h^−1) < alfalfa (97.5 mg C m^−2 h^−1). It can be calculated from these data that the CO2 evolution rate of the alfalfa root system was nearly four times higher than the corresponding rate in the wheat root system. The decline in CO2 evolution rate, especially during the first 4 days after irrigation, was significantly related to the decline in the gravimetric water content, with r = 0.70. CO2 evolution rate and soil temperature at 5 cm depth were negatively correlated (r = -0.56,n = 261) due to increasing soil temperature with decreasing gravimetric water content.

Photoionization of Kr 4s: III. Detailed and extended measurements of the Kr 4s-electron ionization cross section

Absolute Kr 4s-electron photoionization cross sections as a function of the exciting-photon energy were measured by photon-induced fluorescence spectroscopy (PIFS) at improved primary-energy resolution. The cross sections were determined from threshold to 33.5 eV and to 90 eV with primary-photon bandwidths of 25 meV and 50 meV, respectively. The measurements were compared with experimental data and selected theoretical calculations for the direct Kr 4s-electron photoionization cross sections.

Hyperspectral field measurements to determine dry matter yield and nutritive value of legume-grass swards

Summary: Productivity, botanical composition and forage quality of legume-grass swards are important factors for successful arable farming in both organic and conventional farming systems. As these attributes can vary considerably within a field, a non-destructive method of detection while doing other tasks would facilitate a more targeted management of crops, forage and nutrients in the soil-plant-animal system. This study was undertaken to explore the potential of field spectral measurements for a non destructive prediction of dry matter (DM) yield, legume proportion in the sward, metabolizable energy (ME), ash content, crude protein (CP) and acid detergent fiber (ADF) of legume-grass mixtures. Two experiments were conducted in a greenhouse under controlled conditions which allowed collecting spectral measurements which were free from interferences such as wind, passing clouds and changing angles of solar irradiation. In a second step this initial investigation was evaluated in the field by a two year experiment with the same legume-grass swards. Several techniques for analysis of the hyperspectral data set were examined in this study: four vegetation indices (VIs): simple ratio (SR), normalized difference vegetation index (NDVI), enhanced vegetation index (EVI) and red edge position (REP), two-waveband reflectance ratios, modified partial least squares (MPLS) regression and stepwise multiple linear regression (SMLR). The results showed the potential of field spectroscopy and proved its usefulness for the prediction of DM yield, ash content and CP across a wide range of legume proportion and growth stage. In all investigations prediction accuracy of DM yield, ash content and CP could be improved by legume-specific calibrations which included mixtures and pure swards of perennial ryegrass and of the respective legume species. The comparison between the greenhouse and the field experiments showed that the interaction between spectral reflectance and weather conditions as well as incidence angle of light interfered with an accurate determination of DM yield. Further research is hence needed to improve the validity of spectral measurements in the field. Furthermore, the developed models should be tested on varying sites and vegetation periods to enhance the robustness and portability of the models to other environmental conditions.

Scattering and absorption by acoustic resonators

by Karl Uno Ingard.

Admission Control for TCP Flows Using Packet Classes and Edge-to-edge Measurements of Aggregates

TCP flows from applications such as the web or ftp are well supported by a Guaranteed Minimum Throughput Service (GMTS), which provides a minimum network throughput to the flow and, if possible, an extra throughput. We propose a scheme for a GMTS using Admission Control (AC) that is able to provide different minimum throughput to different users and that is suitable for "standard" TCP flows. Moreover, we consider a multidomain scenario where the scheme is used in one of the domains, and we propose some mechanisms for the interconnection with neighbor domains. The whole scheme uses a small set of packet classes in a core-stateless network where each class has a different discarding priority in queues assigned to it. The AC method involves only edge nodes and uses a special probing packet flow (marked as the highest discarding priority class) that is sent continuously from ingress to egress through a path. The available throughput in the path is obtained at the egress using measurements of flow aggregates, and then it is sent back to the ingress. At the ingress each flow is detected using an implicit way and then it is admission controlled. If it is accepted, it receives the GMTS and its packets are marked as the lowest discarding priority classes; otherwise, it receives a best-effort service. The scheme is evaluated through simulation in a simple "bottleneck" topology using different traffic loads consisting of "standard" TCP flows that carry files of varying sizes

Implementation of a robust coded structured light technique for dynamic 3D measurements

This paper presents the implementation details of a coded structured light system for rapid shape acquisition of unknown surfaces. Such techniques are based on the projection of patterns onto a measuring surface and grabbing images of every projection with a camera. Analyzing the pattern deformations that appear in the images, 3D information of the surface can be calculated. The implemented technique projects a unique pattern so that it can be used to measure moving surfaces. The structure of the pattern is a grid where the color of the slits are selected using a De Bruijn sequence. Moreover, since both axis of the pattern are coded, the cross points of the grid have two codewords (which permits to reconstruct them very precisely), while pixels belonging to horizontal and vertical slits have also a codeword. Different sets of colors are used for horizontal and vertical slits, so the resulting pattern is invariant to rotation. Therefore, the alignment constraint between camera and projector considered by a lot of authors is not necessary

Estudio de seguimiento de las audiometrías de los años 2009, 2010 y 2011 de los pilotos de las fuerzas militares

La audición es el segundo mecanismo sensorial más importante después de la visión para obtener información durante la operación de una aeronave. Les permite a los pilotos percibir, procesar identificar los sonidos del ambiente que los rodea. Así necesita oír bien tanto en vuelo como en tierra, especialmente entre 500 y 3000 Hz para la recepción del lenguaje hablado y de las señales auditivas. Objetivo: Determinar los cambios progresivos en el tiempo y las frecuencias auditivas que se afectan en las audiometrías de los pilotos militares de las fuerzas militares en los años 2009, 2010 y 2011. Material y Métodos: Se trata de un estudio longitudinal de cohorte en el cual se identificará el comportamiento de las audiometrías de la población de pilotos de las fuerzas militares de Colombia en los años 2009, 2010 y 2011. Se hará una revisión retrospectiva de dichas audiometrías. Para dicho fin se tomó la población de pilotos de fuerzas militares que fueron distribuidos en grupos de pilotos de aeronave de ala fija que corresponden a 47 pilotos y ala rotatoria que son 155. Conclusiones: Se encontró que la frecuencia mas alterada en la población total fue la de 6000 Hz, que en lo pilotos de ala fija las frecuencias más afectadas fueron las de 4000 Hz y la de 6000Hz, la frecuencia más afectada en los pilotos de ala rotatoria fueron las de 4000 Hz, 6000 Hz y 8000 Hz, con lo que se concluye que la exposición en los pilotos afecta las frecuencias altas en las audiometrías. Se observó una relación con el número de horas de vuelo y las alteraciones audiométricas encontrándose una alteración en los pilotos entre 1000 y 4000 horas de vuelo en las frecuencias de 4000 Hz, 6000 Hz y 8000 Hz y una alteración de las todas las frecuencias en aquellos pilotos con más de 5000 horas de vuelo en el año 2009, presentando posterior recuperación en los años posteriores sin poder determinar en este estudio las causas de dicha recuperación. Los pilotos de ala rotatoria presentaron un incremento sostenido en todas las frecuencias en comparación con los pilotos de ala fija.

Fatiga Laríngea: efectos del uso prolongado de la voz

La voz como herramienta de trabajo de los docentes, puede afectarse por su uso prolongado, abuso o conductas de mal uso, que desencadenan limitaciones funcionales de origen laboral. Uno de los síntomas más frecuentes de quienes usan masivamente su voz con fines ocupacionales es la fatiga laríngea (FL), o cansancio vocal por debilitamiento muscular. El presente estudio quasiexperimental longitudinal pre- postest evaluó el efecto que el uso de la voz, analizando variables sociodemográficas, de salud y trabajo, los estilos de vida y los factores de riesgo ocupacionales, pero principalmente el efecto que produce el uso prolongado de la voz sobre las variables físico acústicas después de un día de trabajo, en 99 docentes de una institución de educación superior en Colombia, en comparación con trabajadores con menor uso vocal. Se aplicó un cuestionario de sintomatología vocal para controlar los sesgos, se le tomaron grabaciones pre y post jornada a cada trabajador con el software Speech Analizer® y se reportaron los cambios subjetivos tras un día de trabajo a cada trabajador. Fueron hallados cambios en las variables físico – acústicas como efecto del uso prolongado de la voz después de un día de trabajo en los dos grupos de participantes, en cuyo caso el efecto fue más significativo en los docentes que en los administrativos – no docentes. El riesgo de presentar trastornos de la voz se asoció directamente con la exposición a factores de riesgo ocupacionales y aquellos asociados a condiciones de salud y al estilo de vida de los individuos, cuyas consecuencias fueron mayores para el grupo de docentes; dado que al ser la voz su principal herramienta de trabajo, el uso fue mayor y asimismo la probabilidad de desencadenar sintomatología vocal, derivada de la fatiga laríngea. La variable de fo promedio para la fonación sostenida de la vocal /a/, que representa una sonido neutro en tonalidad o el tono habitual, mostró diferencias significativas entre grupos (p=0,048). Para este caso, el grupo de docentes registró un aumento de la fo en el postest en comparación con un cambio no significativo para el grupo de administrativos luego del uso prolongado de la voz. En consecuencia, hubo diferencias en el valor registrado para la máxima fo (p =0,025), mínima fo (p=0,011) y el rango de fo (p=0,012) en la emisión sostenida de la vocal /a/. Para el caso del grupo de administrativos, las diferencias significativas estuvieron dadas por la disminución de la fo, rango y máxima y mínima frecuencia en las tres vocales (/a/, /i/, /o/) en contraste con lo ocurrido para el grupo de docentes. En la intensidad de la voz fueron encontradas también diferencias significativas entre grupos (p=0,001) con un decrecimiento del volumen en el postest, tanto promedio como mínimo, máximo y rango de la intensidad, en la fonación sostenida de la vocal /a/ para el grupo de docentes; ninguna significancia estadística fue hallada en el grupo de administrativos para estas variables. Se demostró a través de mediciones objetivas y resultados verificables, el fenómeno de la fatiga laríngea, asociados a los efectos que se presentan tras la demanda vocal continua, discriminando el impacto, entre las variables de cargo y género.