Noninertial observers in special relativity and clock synchronization debates

Selleri's arguments that a consideration of noninertial reference frames in the framework of special relativity identify absolute simultaneity as being Nature's choice of synchronization are considered. In the case of rectilinearly accelerating rockets, it is argued by considering two rockets which maintain a fixed proper separation rather than a fixed separation relative to the inertial frame in which they start from rest, that what seems the most natural choice for a simultaneity convention is problem-dependent and that Einstein's definition is the most natural (though still conventional) choice in this case. In addition, the supposed problems special relativity has with treating a rotating disk, namely how a pulse of light traveling around the circumference of the disk can have a local speed of light equal to c everywhere but a global speed not equal to c, and how coordinate transformations to the disk can give the Lorentz transformations in the limit of large disk radius but small angular velocity, are addressed. It is shown that the theory of Fermi frames solves both of these problems. It is also argued that the question of defining simultaneity relative to a uniformly rotating disk does riot need to be resolved in order to resolve Ehrenfest's paradox.

Gas and particle dynamics of a contoured shock tube for pre-clinical microparticle drug delivery

We investigate the gas-particle dynamics of a device designed for biological pre-clinical experiments. The device uses transonic/supersonic gas flow to accelerate microparticles such that they penetrate the outer skin layers. By using a shock tube coupled to a correctly expanded nozzle, a quasi-one-dimensional, quasi-steady flow (QSF) is produced to uniformly accelerate the microparticles. The system utilises a microparticle cassette (a diaphragm sealed container) that incorporates a jet mixing mechanism to stir the particles prior to diaphragm rupture. Pressure measurements reveal that a QSF exit period - suitable for uniformly accelerating microparticles - exists between 155 and 220 mus after diaphragm rupture. Immediately preceding the QSF period, a starting process secondary shock was shown to form with its (x,t) trajectory comparing well to theoretical estimates. To characterise the microparticle, flow particle image velocimetry experiments were conducted at the nozzle exit, using particle payloads with varying diameter (2.7-48 mu m), density (600-16,800 kg/m(3)) and mass (0.25-10 mg). The resultant microparticle velocities were temporally uniform. The experiments also show that the starting process does not significantly influence the microparticle nozzle exit velocities. The velocity distribution across the nozzle exit was also uniform for the majority of microparticle types tested. For payload masses typically used in pre-clinical drug and vaccine applications (

Cattle, crops and clearing: Regional drivers of landscape change in the Brigalow Belt, Queensland, Australia, 1840-2004

Landscape change occurs through the interaction of a multitude of natural and human driving forces at a range of organisational levels, with humans playing an increasingly dominant role in many regions of the world. Building on the current knowledge of the underlying drivers of landscape change, a conceptual framework of regional landscape change was developed which integrated population, economic and cultural values, policy and science/technology. Using the Southern Brigalow Belt biogeographic region of Queensland as a case study, the role of natural and human drivers in landscape change was investigated in four phases of settlement since 1840. The Brigalow Belt has experienced comparable rates of vegetation clearance over the past 50 years to areas of tropical deforestation. Economic factors were important during all phases of development, but the five regional drivers often acted in synergy. Environmental constraints played a significant role in slowing rates of change. Temporal trends of deforestation followed a sigmoidal curve, with initial slow change accelerating though the middle phases then slowing in recent times. Future landscape management needs to take account of the influence of all the components of the conceptual framework, at a range of organisational levels, if more ecologically sustainable outcomes are to be achieved. (c) 2006 Elsevier B.V. All rights reserved.

Parallel 3D Simulation of a Fault Gouge using the Lattice Solid Model

Despite the insight gained from 2-D particle models, and given that the dynamics of crustal faults occur in 3-D space, the question remains, how do the 3-D fault gouge dynamics differ from those in 2-D? Traditionally, 2-D modeling has been preferred over 3-D simulations because of the computational cost of solving 3-D problems. However, modern high performance computing architectures, combined with a parallel implementation of the Lattice Solid Model (LSM), provide the opportunity to explore 3-D fault micro-mechanics and to advance understanding of effective constitutive relations of fault gouge layers. In this paper, macroscopic friction values from 2-D and 3-D LSM simulations, performed on an SGI Altix 3700 super-cluster, are compared. Two rectangular elastic blocks of bonded particles, with a rough fault plane and separated by a region of randomly sized non-bonded gouge particles, are sheared in opposite directions by normally-loaded driving plates. The results demonstrate that the gouge particles in the 3-D models undergo significant out-of-plane motion during shear. The 3-D models also exhibit a higher mean macroscopic friction than the 2-D models for varying values of interparticle friction. 2-D LSM gouge models have previously been shown to exhibit accelerating energy release in simulated earthquake cycles, supporting the Critical Point hypothesis. The 3-D models are shown to also display accelerating energy release, and good fits of power law time-to-failure functions to the cumulative energy release are obtained.

A IDENTIDADE DA MULTIDÃO NO CULTO CELESTIAL NO APOCALIPSE DE JOÃO

João de Patmos, através de elementos literários e dramáticos e da estrutura cênica e litúrgica, criou no Apocalipse um universo simbólico específico. As imagens deste universo são protagonizadas tanto por seres divinos como também por pessoas humanas que se encontram exaltadas entre os seres celestiais, cantando e louvando a Deus. Durante o processo da composição, o autor da obra se inspirou na tradição apocalíptica e escatológica das tradições visionárias merkavah presentes em Ezequiel, Daniel e 1 Enoque, e fez uma leitura própria destas tradições que obedece aos seus próprios objetivos literários e às necessidades dos leitores / ouvintes do escrito. Os seres celestiais e humanos destacados nas imagens, e a presença de várias confluências de tradições merkavah indicam que o Apocalipse se insere numa vertente da literatura apocalíptica contemporânea do escrito. É notável que, tanto na apocalíptica, em Qumran, na literatura hekhalot como no Apocalipse, há indícios de uma intensa experiência extática de grupos de culto celestial. O cenário de visões é prioritariamente litúrgico, dentro de um templo celestial. As imagens geradas pela leitura das experiências místicas de Ezequiel, 1 Enoque e outros escritos místicos eram contempladas e enriquecidas pelas experiências de viagens celestiais de grupos proféticos durante cultos terrestres. Nas experiências místicas registradas nos fragmentos analisados do Apocalipse de João podem ser percebidas certas feições dos viajantes celestiais. Nos seus discursos sobre a visão do mundo que contemplam e definem, eles revelam suas crenças, desafios e expectativas, a sua auto-compreensão religiosa. Além da identidade dos protagonistas dos cultos celestiais percebe-se também o caráter e a função altamente criadores do fenômeno extático em geral, como também, em particular, no Apocalipse de João. O escrito revela e promove uma estrutura do mundo divino-humano completo e perfeito que está num movimento contínuo, um mundo que, com toda a simbologia inerente, expressa a idéia de criar, recriar e governar o universo inteiro. Os seres humanos participam ativamente deste universo e cooperam com a função reconstituinte dele. Essa cooperação na reconstituição do mundo tem um caráter presente e atual, embora a plenitude desta reconstituição esteja reservada para o futuro.

MIQUÉIAS 6,1-8: UM TEXTO PARADIGMÁTICO NA INTERFACE DA CRÍTICA PROFÉTICA COM A SABEDORIA ISRAELITA

A presente dissertação de mestrado em Literatura e Religião no Mundo Bíblico tem por objetivo realizar um comentário exegético e hermenêutico de um texto reconhecido como profético e sua relação no plano teológico, antropológico e literário com o universo sapiencial israelita no período pós-exílico. Trata-se do estudo de Miquéias 6,1-8, cujo foco de investigação desenvolveu-se a partir da análise do discurso e da hipótese de confluência de gêneros literários, a saber, o profético e o sapiencial. Considerado sob os aspectos formais, contextuais e de conteúdo antropo teológico, o texto estudado apresenta-se como resultado da composição de diversos gêneros literários e manifesta, internamente, conflitos de teologias que vão desde a interpretação da própria história de Israel até a prática religiosa com suas concepções de Deus. Miquéias 6,1-8, interpretado aqui a partir de metodologias exegéticas modernas e abordagens contextuais e antropológicas, configura-se como uma verdadeira síntese de interpretação deuteronomista não hegemônica dos eventos do êxodo e da mensagem dos profetas bíblicos do século VIII aeC Miquéias, Amós, Oséias e Isaías. Estamos diante de um texto que se apresenta, ao mesmo tempo, coeso e portador de diferentes universos e vozes em sua composição. Seu discurso, cujo teor nasce do conflito entre projetos e grupos no período pós-exílico, resgata memórias antigas de um êxodo que passa por sujeitos marginais e reinterpreta a crítica profética em sua função de discernimento ético e teológico, porém, no formato sapiencial. Pela profundidade sócio teológica e pela proposta não sacrificial de seu discurso, Miquéias 6,1-8 tem sido um texto continuamente revisitado no interior da Teologia da Libertação na América Latina, inspirando boa parte de sua produção.

Efeito do laser de baixa intensidade no procedimento de expansão rápida da maxila

A proposta do presente estudo foi avaliar os efeitos do laser de baixa intensidade na regeneração óssea no procedimento de expansão rápida da maxila. Utilizou-se 27 indivíduos com média de idade de 10,2 anos, divididos em dois grupos: grupo laser (n=14), no qual se realizou a expansão rápida da maxila, associada ao laser e grupo sem laser (n=13), que realizou somente a expansão rápida da maxila. O protocolo de ativação do parafuso expansor foi de 1 volta completa no primeiro dia e ½ volta diária até a sobrecorreção. O laser utilizado foi o de diodo (TWIN Laser MMOptics®, São Carlos), seguindo o protocolo de aplicação: comprimento de onda de 780nm, potência de 40mW, densidade de 10J/cm2, em 10 pontos localizados ao redor da sutura palatina mediana. Os estágios de aplicação foram: L1 (do primeiro ao quinto dia de aplicação), L2 (travamento do parafuso e 3 dias seguidos), L3, L4 e L5 (após 7, 14 e 21 dias do L2, respectivamente). Radiografias oclusais da maxila foram realizadas com auxílio de uma escala de alumínio, para referencial densitométrico, em diferentes tempos: T1 (inicial), T2 (dia de travamento do parafuso), T3 (3 a 5 dias do T2), T4 (30 dias do T3), T5 (60 dias do T4). As radiografias foram digitalizadas e submetidas a um programa de imagem (Image Tool - UTHSCSA, Texas, USA), para mensuração da densidade óptica das áreas previamente selecionadas. Para realização do teste estatístico, utilizou-se a Análise de Covariância usando como covariável o tempo para a fase avaliada. Em todos os testes foi adotado nível de significância de 5% (p<0,05).Para o Grupo Laser, os dados mostram que houve uma queda significante de densidade durante a abertura do parafuso (T2-T1), um aumento significante da mesma no período final de avaliação (T5-T4), e um aumento também da densidade no período de regeneração propriamente dito (T5-T2), ou seja, a partir do momento em que finalizou a fase de abertura do parafuso expansor. Enquanto que no Grupo Sem Laser, a densidade não mostrou diferença estatisticamente significantemente em nenhum período analisado. Os resultados mostraram que o laser propiciou consideravelmente uma melhor abertura da sutura palatina mediana, além de influenciar no processo de regeneração óssea da sutura, acelerando seus processos de reparo.(AU)

A UTILIZAÇÃO DO LASER DE BAIXA INTENSIDADE NA MOVIMENTAÇÃO DENTÁRIA E NA SENSIBILIDADE DOLOROSA APÓS APLICAÇÃO DE FORÇA ORTODÔNTICA

O presente estudo objetivou avaliar a eficácia do Laser de Baixa Intensidade (LBI) na aceleração da movimentação dentária e na diminuição da dor frente à aplicação de força ortodôntica. A amostra foi composta por 19 pacientes, sendo doze do sexo feminino e sete do sexo masculino, com idade inicial média de 14,69 anos, todos com indicação para extrações de primeiros pré-molares. Destes, 66 caninos foram submetidos à retração inicial, sendo que 33 receberam aplicação de laser e 33 foram considerados controle. Utilizou-se o Laser de Baixa Intensidade de arseneto de gálio e alumínio, com comprimento de onda de 780nm, na dosimetria de 40mW;10J/cm2;10s/ponto, aplicado apenas uma vez ao mês em dez pontos, sendo cinco por vestibular e cinco por lingual/palatino. Modelos de gesso foram confeccionados durante todos os meses de retração dos caninos, que teve duração de quatro meses, sendo, posteriormente, digitalizados para se mensurar a quantidade de movimentação de um lado em relação ao outro, utilizando-se como referência as papilas incisivas. Para a avaliação da dor experimentada pelos pacientes, os mesmos foram orientados a preencher uma escala analógica visual (VAS) que variava de 0 a 10 , em que zero significava nenhuma dor e dez significava dor insuportável, nos intervalos de 12, 24, 48 e 72 horas após a aplicação da força ortodôntica. Foi mensurado o apinhamento de todas as hemiarcadas dos pacientes na fase inicial, medindo-se a distância entre os pontos de contato de cada dente. Para a verificação do padrão de normalidade, empregou-se o teste de Kolmogorov-Smirnov, sendo que para comparar o lado irradiado com o lado não irradiado foi utilizado o teste t pareado, exceto para a variável razão caninos/molares , analisada pelo teste não paramétrico de Wilcoxon (p<0,05). Os resultados mostraram que em relação ao apinhamento dentário, os lados irradiado e não irradiado apresentaram-se compatíveis. Além disso, não houve diferença estatisticamente significante entre a quantidade de retração dos caninos irradiados comparados aos não irradiados, o mesmo acontecendo com a sensibilidade dolorosa experimentada pelos pacientes. Concluiu-se assim que o LBI na dosimetria e forma como foi utilizado não foi eficiente na aceleração da movimentação dentária nem na redução da dor experimentada pelos pacientes frente às forças ortodônticas.

An investigation of the mechanics of wire drawing with the superposition of an oscillatory drawing stress

A number of investigators have studied the application of oscillatory energy to a metal undergoing plastic deformation. Their results have shown that oscillatory stresses reduce both the stress required to initiate plastic deformation and the friction forces between the tool and workpiece. The first two sections in this thesis discuss historically and technically the devolopment of the use of oscillatory energy techniques to aid metal forming with particular reference to wire drawing. The remainder of the thesis discusses the research undertaken to study the effect of applying longitudinal oscillations to wire drawing. Oscillations were supplied from an electric hydraulic vibrator at frequencies in the range 25 to 500 c/s., and drawing tests were performed at drawing speeds up to 50 ft/m. on a 2000 lbf. bull-block. Equipment was designed to measure the drawing force, drawing torque, amplitude of die and drum oscillation and drawing speed. Reasons are given for selecting mild steel, pure and hard aluminium, stainless steel and hard copper as the materials to be drawn, and the experimental procedure and calibration of measuring equipment arc described. Results show that when oscillatory stresses are applied at frequencies within the range investigated : (a) There is no reduction in the maximum drawing load. (b) Using sodium stearate lubricant there is a negligible reduction in the coefficient of friction between the die and wire. (c) Pure aluminium does not absorb sufficient oscillatory energy to ease the movement of dislocations. (d) Hard aluminium is not softened by oscillatory energy accelerating the diffusion process. (e) Hard copper is not cyclically softened. A vibration analysis of the bull-block and wire showed that oscillatory drawiing in this frequency range, is a mechanical process of straining; and unstraining the drawn wire, and is dependent upon the stiffness of the material being drawn and the drawing machine. Directions which further work should take are suggested.

Binocular contrast vision at and above threshold

A fundamental problem for any visual system with binocular overlap is the combination of information from the two eyes. Electrophysiology shows that binocular integration of luminance contrast occurs early in visual cortex, but a specific systems architecture has not been established for human vision. Here, we address this by performing binocular summation and monocular, binocular, and dichoptic masking experiments for horizontal 1 cycle per degree test and masking gratings. These data reject three previously published proposals, each of which predict too little binocular summation and insufficient dichoptic facilitation. However, a simple development of one of the rejected models (the twin summation model) and a completely new model (the two-stage model) provide very good fits to the data. Two features common to both models are gently accelerating (almost linear) contrast transduction prior to binocular summation and suppressive ocular interactions that contribute to contrast gain control. With all model parameters fixed, both models correctly predict (1) systematic variation in psychometric slopes, (2) dichoptic contrast matching, and (3) high levels of binocular summation for various levels of binocular pedestal contrast. A review of evidence from elsewhere leads us to favor the two-stage model. © 2006 ARVO.

Responsive systems:an introduction

This paper introduces responsive systems: systems that are real-time, event-based, or time-dependent. There are a number of trends that are accelerating the adoption of responsive systems: timeliness requirements for business information systems are becoming more prevalent, embedded systems are increasingly integrated into soft real-time command-and-control systems, improved message-oriented middleware is facilitating growth in event-processing applications, and advances in service-oriented and component-based techniques are lowering the costs of developing and deploying responsive applications. The use of responsive systems is illustrated here in two application areas: the defense industry and online gaming. The papers in this special issue of the IBM Systems Journal are then introduced. The paper concludes with a discussion of the key remaining challenges in this area and ideas for further work.

An account of the sustainable development process in Bangladesh

With the accelerating industrialization process, even further increasing population and mass deforestation, ‘sustainability’ as a concept has only recently been popularized in Bangladesh. This paper sheds light on the sustainable development process in Bangladesh. It points out the major challenges to this process and identifies the motivating factors for a sustainable society in Bangladesh. The paper concludes with some strategies that are considered essential for the development of a sustainable society in Bangladesh, e.g., strong and effective regulatory framework, emphasis on rural entrepreneurship, development of indigenous technology and an integrated environmental management system.

Seeing light vs dark lines: psychophysical performance is based on separate channels, limited by noise and uncertainty

Visual detection performance (d') is usually an accelerating function of stimulus contrast, which could imply a smooth, threshold-like nonlinearity in the sensory response. Alternatively, Pelli (1985 Journal of the Optical Society of America A 2 1508 - 1532) developed the 'uncertainty model' in which responses were linear with contrast, but the observer was uncertain about which of many noisy channels contained the signal. Such internal uncertainty effectively adds noise to weak signals, and predicts the nonlinear psychometric function. We re-examined these ideas by plotting psychometric functions (as z-scores) for two observers (SAW, PRM) with high precision. The task was to detect a single, vertical, blurred line at the fixation point, or identify its polarity (light vs dark). Detection of a known polarity was nearly linear for SAW but very nonlinear for PRM. Randomly interleaving light and dark trials reduced performance and rendered it non-linear for SAW, but had little effect for PRM. This occurred for both single-interval and 2AFC procedures. The whole pattern of results was well predicted by our Monte Carlo simulation of Pelli's model, with only two free parameters. SAW (highly practised) had very low uncertainty. PRM (with little prior practice) had much greater uncertainty, resulting in lower contrast sensitivity, nonlinear performance, and no effect of external (polarity) uncertainty. For SAW, identification was about v2 better than detection, implying statistically independent channels for stimuli of opposite polarity, rather than an opponent (light - dark) channel. These findings strongly suggest that noise and uncertainty, rather than sensory nonlinearity, limit visual detection.

Interocular masking and summation indicate two stages of divisive contrast gain control

Our understanding of early spatial vision owes much to contrast masking and summation paradigms. In particular, the deep region of facilitation at low mask contrasts is thought to indicate a rapidly accelerating contrast transducer (eg a square-law or greater). In experiment 1, we tapped an early stage of this process by measuring monocular and binocular thresholds for patches of 1 cycle deg-1 sine-wave grating. Threshold ratios were around 1.7, implying a nearly linear transducer with an exponent around 1.3. With this form of transducer, two previous models (Legge, 1984 Vision Research 24 385 - 394; Meese et al, 2004 Perception 33 Supplement, 41) failed to fit the monocular, binocular, and dichoptic masking functions measured in experiment 2. However, a new model with two-stages of divisive gain control fits the data very well. Stage 1 incorporates nearly linear monocular transducers (to account for the high level of binocular summation and slight dichoptic facilitation), and monocular and interocular suppression (to fit the profound 42 Oral presentations: Spatial vision Thursday dichoptic masking). Stage 2 incorporates steeply accelerating transduction (to fit the deep regions of monocular and binocular facilitation), and binocular summation and suppression (to fit the monocular and binocular masking). With all model parameters fixed from the discrimination thresholds, we examined the slopes of the psychometric functions. The monocular and binocular slopes were steep (Weibull ߘ3-4) at very low mask contrasts and shallow (ߘ1.2) at all higher contrasts, as predicted by all three models. The dichoptic slopes were steep (ߘ3-4) at very low contrasts, and very steep (ß>5.5) at high contrasts (confirming Meese et al, loco cit.). A crucial new result was that intermediate dichoptic mask contrasts produced shallow slopes (ߘ2). Only the two-stage model predicted the observed pattern of slope variation, so providing good empirical support for a two-stage process of binocular contrast transduction. [Supported by EPSRC GR/S74515/01]

Binocular summation at contrast threshold:a new look

Contrast sensitivity is better with two eyes than one. The standard view is that thresholds are about 1.4 (v2) times better with two eyes, and that this arises from monocular responses that, near threshold, are proportional to the square of contrast, followed by binocular summation of the two monocular signals. However, estimates of the threshold ratio in the literature vary from about 1.2 to 1.9, and many early studies had methodological weaknesses. We collected extensive new data, and applied a general model of binocular summation to interpret the threshold ratio. We used horizontal gratings (0.25 - 4 cycles deg-1) flickering sinusoidally (1 - 16 Hz), presented to one or both eyes through frame-alternating ferroelectric goggles with negligible cross-talk, and used a 2AFC staircase method to estimate contrast thresholds and psychometric slopes. Four naive observers completed 20 000 trials each, and their mean threshold ratios were 1.63, 1.69, 1.71, 1.81 - grand mean 1.71 - well above the classical v2. Mean ratios tended to be slightly lower (~1.60) at low spatial or high temporal frequencies. We modelled contrast detection very simply by assuming a single binocular mechanism whose response is proportional to (Lm + Rm) p, followed by fixed additive noise, where L,R are contrasts in the left and right eyes, and m, p are constants. Contrast-gain-control effects were assumed to be negligible near threshold. On this model the threshold ratio is 2(?1/m), implying that m=1.3 on average, while the Weibull psychometric slope (median 3.28) equals 1.247mp, yielding p=2.0. Together, the model and data suggest that, at low contrasts across a wide spatiotemporal frequency range, monocular pathways are nearly linear in their contrast response (m close to 1), while a strongly accelerating nonlinearity (p=2, a 'soft threshold') occurs after binocular summation. [Supported by EPSRC project grant GR/S74515/01]