Overstock and stock-out in Volkswagen Autoeuropa

The following work is a case study of overstock and stock-out problems at Volkswagen Autoeuropa (VWAE). It introduces the supply chain of Autoeuropa and specializes then on failures connected to inventory problems. Having a successful supply chain is important in a world where products become more and more similar as it can give to companies an edge over their competitors. The case shows three practices that VWAE uses to prevent and to overcome stock problems. Information was gathered by doing interviews with different managers, by analyzing the company’s key processes and by literature research related to the topics of supply chain management and flexibility in the supply chain. Three practices were further investigated: the use of alternative parts, support of the supplier and a rating system of suppliers. In the question section of this work the importance of flexibility and Supplier Relationship Management (SRM) when connected to supply chain management are explained. The described different practices are numerically analyzed and it is concluded that each practice brings both cost savings and the possibility of achieving target numbers to the company, showing the company’s flexibility to react to supply chain disturbances. Because of confidentiality reasons, persons in the case are fictionalized and numbers are wherever possible equalized to 100 in order to display true proportions.

Diagnosing lymphoma in a setting with a high burden of infection: a pediatric case of Epstein-Barr virus-associated aggressive B-cell lymphoma with t(8;14) (q23;q32) and extensive necrosis mimicking tuberculosis

The association of lymphoma with necrotic granuloma can pose diagnostic challenges and delay treatment, especially in settings with a high burden of infection. In these settings, the timely use of cytogenetic and molecular methods is most relevant. Here, we report a case of B-cell lymphoma with t (8;14) in a 5-year-old male child. The lymphoma was associated with necrotic granuloma and was initially misdiagnosed as tuberculosis. Polymerase chain reaction was used to detect clonal lymphoproliferation and to rule out Mycobacterium tuberculosis infection. Tumor cells harbored Epstein-Barr virus and expressed CD20, CD10, BCL6, and Ki67 (30%), leading to the diagnosis of B-cell lymphoma with features intermediate between diffuse large B-cell lymphoma and Burkitt lymphoma.

From "Humanities and Computing" to "Digital Humanities": Digital Humanities in Portugal with a focus on Historical Research

In the following text I will develop three major aspects. The first is to draw attention to those who seem to have been the disciplinary fields where, despite everything, the Digital Humanities (in the broad perspective as will be regarded here) have asserted themselves in a more comprehensive manner. I think it is here that I run into greater risks, not only for what I have mentioned above, but certainly because a significant part, perhaps, of the achievements and of the researchers might have escaped the look that I sought to cast upon the past few decades, always influenced by my own experience and the work carried out in the field of History. But this can be considered as a work in progress and it is open to criticism and suggestions. A second point to note is that emphasis will be given to the main lines of development in the relationship between historical research and digital methodologies, resources and tools. Finally, I will try to make a brief analysis of what has been the Digital Humanities discourse appropriation in recent years, with very debatable data and methods for sure, because studies are still scarce and little systematic information is available that would allow to go beyond an introductory reflection.

Pain evaluation of patients with fibromyalgia, osteoarthritis, and low back pain

The purpose of this study was to evaluate and compare pain as reported by outpatients with fibromyalgia, osteoarthritis, and low back pain, in view of designing more adequate physical therapy treatment. PATIENTS AND METHODS: A Portuguese version of the McGill Pain Questionnaire - where subjects are asked to choose, from lists of pre-categorized words, one or none that best describes what they feel - was used to assess pain intensity and quality of 64 patients, of which 24 had fibromyalgia, 22 had osteoarthritis, and 18 had low back pain. The pre-categorized words were organized into 4 major classes -- sensory, affective, evaluative, and miscellaneous. RESULTS: Patients with fibromyalgia reported, comparatively, more intense pain through their choice of pain descriptors, both sensory and affective; they also chose a higher number of words from these classes than patients in the other groups and were the only ones to choose specific affective descriptors such as "vicious", "wretched", "exhausting", "blinding". CONCLUSION: Assuming that each disease presents unique qualities of pain experience, and that these can be pointed out by means of this questionnaire by patients' choice of specific groups of words, the findings suggest that fibromyalgia include not only a physical component, but also a psycho-emotional component, indicating that they require both emotional/affective and physical care.

Cost of drugs manufactured by the University Hospital - role of the Central Pharmacy

The hospital pharmacy in large and advanced institutions has evolved from a simple storage and distribution unit into a highly specialized manipulation and dispensation center, responsible for the handling of hundreds of clinical requests, many of them unique and not obtainable from commercial companies. It was therefore quite natural that in many environments, a manufacturing service was gradually established, to cater to both conventional and extraordinary demands of the medical staff. That was the case of Hospital das Clinicas, where multiple categories of drugs are routinely produced inside the pharmacy. However, cost-containment imperatives dictate that such activities be reassessed in the light of their efficiency and essentiality. METHODS: In a prospective study, the output of the Manufacturing Service of the Central Pharmacy during a 12-month period was documented and classified into three types. Group I comprised drugs similar to commercially distributed products, Group II included exclusive formulations for routine consumption, and Group III dealt with special demands related to clinical investigations. RESULTS: Findings for the three categories indicated that these groups represented 34.4%, 45.3%, and 20.3% of total manufacture orders, respectively. Costs of production were assessed and compared with market prices for Group 1 preparations, indicating savings of 63.5%. When applied to the other groups, for which direct equivalent in market value did not exist, these results would suggest total yearly savings of over 5 100 000 US dollars. Even considering that these calculations leave out many components of cost, notably those concerning marketing and distribution, it might still be concluded that at least part of the savings achieved were real. CONCLUSIONS: The observed savings, allied with the convenience and reliability with which the Central Pharmacy performed its obligations, support the contention that internal manufacture of pharmaceutical formulations was a cost-effective alternative in the described setting.

Analysis of human leukocyte antigens class II-DR in Brazilian children and adolescents with systemic lupus erythematosus

OBJECTIVE: To analyze the frequency of human leukocyte antigens class II-DR in children and adolescents with systemic lupus erythematosus. PATIENTS AND METHODS: Fifty-fiveBrazilian systemic lupus erythematosus children and adolescents and 308 healthy individuals were studied. Gender, race, and age of onset of systemic lupus erythematosus were recorded. The human leukocyte antigens typing of class II-DR was carried out by polymerase chain reaction amplification with sequence-specific primers (PCR-SSP). Data were analyzed statistically using the chi square test with Yates' correction, Fisher's exact test, and Bonferroni's correction. RESULTS: Human leukocyte antigen-DR 15 was the most frequently detected antigen in this group of children and adolescents, and it also occurred more frequently in the female group, in children with onset of systemic lupus erythematosus between 0 and 9 years and between 10 to 14 years, and in the Black race group, but these associations were not statistically significants. CONCLUSION: In this group of children and adolescents with a high degree of racial admixture, we could not verify a significant association between human leukocyte antigens class II-DR and systemic lupus erythematosus.

Detection of testicular cancer in men presenting with infertility

PURPOSE: Infertility is one of the less common presenting features associated with testicular tumors. We evaluated the histologic and biochemical findings, and pregnancy outcome in patients presenting with infertility who were found to have testicular tumors. METHODS: Seven patients with infertility were found to have testicular cancer over a 15-year period. All patients had a testicular ultrasound evaluation. The indications for the ultrasound were testicular pain in 2 patients, suspicious palpable mass in 4, and to rule out the presence of germ cell neoplasia in a patient with carcinoma in situ detected on a previous biopsy. Physical exam, histological findings, hormonal levels, tumor markers, and pregnancy outcome results were recorded from the patients medical charts. RESULTS: Two men had elevated serum follicle stimulant hormone and luteinizing hormone levels, 1 of them had an abnormally low serum testosterone level. Tumor markers were normal in all patients. In 4 patients the tumor was on the right side and in 3 on the left. The histological diagnoses were seminoma (n = 5), Leydig cell tumor (n = 1), and carcinoma in situ (n = 1). Of the 7 patients, 5 underwent adjuvant radiation therapy. Two patients had sperm cryopreserved. Follow up on fertility status was available in 6 cases. One patient has established a pregnancy and 5 did not achieve a pregnancy after treatment for their cancer. CONCLUSIONS: Most of the men who have testicular cancer and male infertility have a seminona. Therefore, men who present with infertility should be thoroughly investigated to rule out such serious, concomitant diseases along with their infertility.

The role of guarantees in pension plan design: Pension saving decisions

This study centers on the assessment of psychological value of guarantees in pension products and the behavior biases associated with choice. When a guarantee on a product increases from 99% to 99,5% less than half of respondents show willingness to pay in contrast with 73% when going from 99,5% to 100%. Out of 105 respondents, 55 show that their choices concerning pension products are inconsistent with classic utility theory. Financial background proves insignificant thus pointing to behavioral biases. As individuals make choices that leave them worse-off, we argue that pension plan design would highly benefit from public policy interventions.

Alpha generation with Twitter’s daily momentum

This thesis does not set out to focus on the dynamics relationship between Twitter and stock prices, but instead tries to understand if using relevant information extracted from tweets has the power to increase investors’ stock picking ability, and generate alpha in portfolio’s choice relative to a benchmark. Despite the short period analyzed, it gives promising results that the sentiment analysis performed by Social Market Analytics Inc. applied to an equity portfolio, is able to generate positive abnormal returns, statistically significant in and out of sample.

Renal and urinary findings in 20 patients with Williams-Beuren syndrome diagnosed by fluorescence in situ hybridization (FISH)

PURPOSE: Williams-Beuren syndrome is a rare multiple anomalies/mental retardation syndrome caused by deletion of contiguous genes at chromosome region 7q11.23. The aim of this work was to determine the frequency and the types of renal and urinary tract anomalies in 20 patients with Williams-Beuren syndrome. METHODS: The fluorescence in situ hybridization test using a LSI Williams syndrome region DNA probe was performed for all 20 patients to confirm the diagnosis of Williams-Beuren syndrome. A prospective study was performed in order to investigate renal and urinary aspects using laboratory assays to check renal function, ultrasonography of the kidneys and urinary tract, voiding cystourethrogram and urodynamics. RESULTS: Deletion of the elastin gene (positive fluorescence in situ hybridization test) was found in 17 out of 20 patients. Renal alterations were diagnosed in 5 of 17 (29%) the patients with the deletion and in 1 of 3 patients without the deletion. Fourteen patients with the deletion presented dysfunctional voiding. Arterial hypertension was diagnosed in 3 patients with deletions and 1 of these presented bilateral stenosis of the renal arteries. CONCLUSIONS: Due to the high incidence of renal and urinary abnormalities in Williams-Beuren syndrome, performing a systematic laboratory and sonographic evaluation of the patients is recommended.

Which communication strategy should a male luxury (fashion) brand – associated with a luxury car brand – develop, in order to increase its awareness in Europe

This work project explores how a male luxury (fashion) brand (subsidiary) that is associated with a luxury car brand (parent company) should develop its communication strategy in order to increase awareness in Europe. For this purpose a quantitative research was conducted. The aim was to find out whether the company in question had low brand awareness among European luxury consumers. Hereafter, a qualitative research revealed important insights in regard to luxury communication among male luxury consumers. Both the results of the research and the recommendations of luxury experts laid the foundation for the development of a solution-oriented communication strategy. The result of the analysis crystallizes the importance of the shared heritage and the synergistic effects, of which the subsidiary should make vast use when communicating.

Thin panels of cement composites reinforced with recycled fibres for the shear strengthening of reinforced concrete elements

A new technique was developed for producing thin panels of a cement based material reinforced with relatively high content of steel fibres originated from the industry of tyre recycling. Flexural tests with notched and un-notched specimens were carried out to characterize the mechanical properties of this Fibre Reinforced Cement Composite (FRCC) and the results are presented and discussed. The values of the fracture mode I parameters of the developed FRCC were determined by performing inverse analysis with test results obtained in three point notched beam bending tests. To appraise the potentialities of these FRCC panels for the increase of the shear capacity of reinforced (RC) beams, numerical research was performed on the use of developed FRCC panel for shear reinforcement by applying the panels in the lateral faces of RC beams deficiently reinforced in shear.

Prestress losses in reinforced concrete beams strengthened with NSM-CFRP laminates

Using prestressed near surface mounted fibre reinforced polymers (NSM-FRP) is nowadays regaining the attention from the scientific community for the strengthening of existing reinforced concrete (RC) structures. The application of prestressed internal FRP bars and externally bonded prestressed FRPs has already been deeply investigated and revealed considerable benefits when compared to the corresponding passive solutions. A certain amount of prestress provides benefits mainly associated to structural integrity and material durability. Immediately after prestress transference, it is possible to close some of the existing cracks, decreasing the susceptibility of the element to corrosion and, a certain amount of deflection can be recovered due to the creation of a negative curvature. However, very few studies have been carried out to properly assess the preservation of prestress over time. In this context, several reinforced concrete beams strengthened with prestressed NSM carbon FRP (CFRP) laminates were prestressed and monitored for about 40 days. The data obtained from these experimental programs is in this paper presented and analysed. The observed prestress losses were later modelled using finite elements analysis and, although this topic is not addressed in this paper, the obtained results revealed considerable precision. The largest strain losses in the CFRP laminate were found to be mainly located in the extremities of the bonded length, while in the central zone most of the applied pre-strain was retained over time. The highest CFRP strain losses were observed in the first 6 to 12 days after prestress transfer, suggesting that the application of prestressed NSM-FRP will be very effective over time.

In-plane stiffness of timber floors strengthened with CLT

Five full-scale timber floors were tested in order to analyse the in-plane behaviour of these structural systems. The main objective was an assessment of the effectiveness of in-plane strengthening using cross-laminated timber (CLT). To this end, one unstrengthened specimen (original), one specimen strengthened with a second layer of floorboards, two specimens strengthened with three CLT panels, and one specimen strengthened with two CLT panels, were tested. A numerical analysis was then performed in order to analyse the composite behaviour of the timber floors in more detail. Due to its importance as regards composite behaviour, the first phase of the experimental programme was composed of push-out tests on specimens representing the shear connection between the timber beams and the CLT panels. This paper describes the tests performed and the numerical modelling applied to evaluate the composite behaviour of the strengthened timber floors. The use of CLT panels is revealed to be an effective way to increase the in-plane stiffness of timber floors, through which the behaviour of the composite structure can be significantly changed, depending on the connection applied, or modified as required.

Numerical Assessment of the out-of-plane response of a brick masonry structure without box behaviour

This paper presents the assessment of the out-of-plane response due to seismic loading of a masonry structure without rigid diaphragm. This structure corresponds to real scale brick masonry specimen with a main façade connected to two return walls. Two modelling approaches were defined for this evaluation. The first one consisted on macro modelling, whereas the second one on simplified micro modelling. As a first step of this study, static nonlinear analyses were conducted to the macro model aiming at evaluating the out-of-plane response and failure mechanism of the masonry structure. A sensibility analyses was performed in order to assess the mesh size and material model dependency. In addition, the macro models were subjected to dynamic nonlinear analyses with time integration in order to assess the collapse mechanism. Finally, these analyses were also applied to a simplified micro model of the masonry structure. Furthermore, these results were compared to experimental response from shaking table tests. It was observed that these numerical techniques simulate correctly the in-plane behaviour of masonry structures. However, the