Screening of iron-enriched fungus from natural environment and evaluation of organically bound iron bioavailability in rats

Iron is an essential element for nearly all living organisms, and its deficiency is the most common form of malnutrition in the world. The organic forms of trace elements are considered more bioavailable than the inorganic forms. Although Saccharomyces cerevisiae can enrich metal elements and convert inorganic iron to organic species, its tolerability and transforming capacity are limited. The aim of this study was to screen higher biomass and other iron-enriched fungi strains besides Saccharomyces cerevisiae from the natural environment. A PDA medium containing 800 μg/mL iron was used for initial screening. Fifty strains that tolerated high iron concentration were isolated from the natural environment, and only one strain, No.BY1109, grew well at Fe (II) concentration of 10,000μg/ml. According to morphological characterization, 18S rDNA sequence analysis, and biophysical and biochemical characterization, the strain No.BY1109 was identified as Rhodotorula. The iron content of No.BY1109 (10 mg Fe/g dry cell) was determined using atomic absorption spectrometry. The results of distribution of iron in the cells showed that iron ion was mainly chelated in the cell walls and vacuoles. The bioavailability in rats confirmed that strain No.BY1109 had higher absorption efficiency than that of ferrous sulfate after single dose oral administration. The present study introduces new iron supplements, and it is a basis for finding new iron supplements from natural environment.

The backwoods of our backyards : Ontario pioneers and the crisis of ecology /

Early in his landmark ecocritical book The Comedy of Survival, Joseph Meeker develops an intriguing hypothesis about human behaviour. He remarks the species Homo sapiens tend to behave like an invasive or pioneering organism, entering a bio-geographical region and aggressively outcompeting all other species for space and resources. Moreover, he suggests, human cultural traditions, at least in the West, have reinforced such behaviour, continually insisting that the impulses he describes are both necessary and right. While Meeker's work goes on to assess a number of literary works in both the tragic and comic modes, his work never fully explores this hypothesis in the context of human pioneers; that is, there is no ~xploration o( how these themes manifest themselves within our culture and what role they might play in the culture of specific pioneering groups. This project is an attempt at just such an analysis, examining the validity of Meeker's hypothesis through a case study of settler literature in Upper Canada/Ontario between the . years 1800-1867. It explores Meeker's work within three main areas: first, Chapter Two situates his book historically within the field of ecocriticism, showing what came before and the explosion of ecocritical inquiry that followed its release. This chapter also delves into the rift between the natural sciences and humanities, arguing that a move towards deeper interdisciplinarity is r:tecessary for the future. Chapter Three examines the biological and ecological ground on which Meeker rests his hypothesis through exploring evolutionary biology as well as invasive and pioneer species behaviour. Lastly, Chapter Four examines how these ecological principles are manifested in the writings of early Canadian settlers, suggesting that Meeker's hypothesis indeed finds itself on stable footing.

Adolescent girls and mathematics: classroom performance, attitudes toward mathematics and perceptions of parental attitudes /

The purpose of this study was to determine the extent to which gender differences exist in student attitudes toward mathematics and in their performance in mathematics at the Grade Seven and Eight level. The study also questioned how parents influence the attitudes of this grade level of male and female students toward mathematics. Historically, the literature has demonstrated gender differences in the attitudes of students toward mathematics, and in parental support for classroom performance in mathematics. This study was an attempt to examine these differences at one senior public school in the Peel Board of Education. One hundred three Grade Seven and Eight students at a middle school in the Peel Board of Education volunteered to take part in a survey that examined their attitudes toward mathematics, their perceptions of their parents' attitudes toward mathematics and support for good performance in the mathematics classroom, parental expectations for education and future career choices. Gender differences related to performance levels in the mathematics classroom were examined using Pearson contingency analyses. Items from the survey that showed significant differences involved confidence in mathematics and confidence in writing mathematics tests, as well as a belief in the ability to work on mathematics problems. Male students in both the high and low performance groups demonstrated higher levels of confidence than the females in those groups. Female students, however, indicated interest in careers that would require training and knowledge of higher mathematics. Some of the reasons given to explain the gender differences in confidence levels included socialization pressures on females, peer acceptance, and attribution of success. Perceived parental support showed no significant differences across gender groups or performance levels. Possible explanations dealt with the family structure of the participants in the study. Studies that, in the past, have demonstrated gender differences in confidence levels were supported by this study, and discussed in detail. Studies that reported on differences in parental support for student performance, based on the gender of the parent, were not confirmed by this study, and reasons for this were also discussed. The implications for the classroom include: 1) build on the female students' strengths that will allow them to enjoy their experiences in mathematics; 2) stop using the boys as a comparison group; and 3) make students more aware of the need to continue studying mathematics to ensure a wider choice of future careers.

Leadership and its impact on the success of Social Sciences and Humanities Research Council funded collaborative research projects

This dissertation investigates the practice of leadership in collaboratively designed and funded research in a university setting. More specifically, this research explores the meaning of leadership as experienced by researchers who were, or still are, engaged on Social Sciences and Humanities Research Council (SSHRC) funded collaborative research projects in a university setting. This qualitative study (Gay & Airasian, 2003) is situated within a social constructivist paradigm (Kezar, Carducci, & Contreras-McGavin, 2006) and involves an analysis of the responses from 12 researchers who answered 11questions related to my overarching research question: What is the impact of leadership on university based collaborative research projects funded by the Social Sciences and Humanities Research Council based on the experiences of researchers involved? The data that emerged supported and enhanced the existing literature related to leadership and collaborative groups in academia. The type of preferred leadership that emerged as a result of this research seemed to indicate that the type of leader that appeared to be optimal in this context might be described as a functional collaborative expert.

Variability in the Insect and Plant Adhesins, Mad1 and Mad2, within the Fungal Genus Metarhizium Suggest Plant Adaptation as an Evolutionary Force

Several species of the insect pathogenic fungus Metarhizium are associated with certain plant types and genome analyses suggested a bifunctional lifestyle; as an insect pathogen and as a plant symbiont. Here we wanted to explore whether there was more variation in genes devoted to plant association (Mad2) or to insect association (Mad1) overall in the genus Metarhizium. Greater divergence within the genus Metarhizium in one of these genes may provide evidence for whether host insect or plant is a driving force in adaptation and evolution in the genus Metarhizium. We compared differences in variation in the insect adhesin gene, Mad1, which enables attachment to insect cuticle, and the plant adhesin gene, Mad2, which enables attachment to plants. Overall variation for the Mad1 promoter region (7.1%), Mad1 open reading frame (6.7%), and Mad2 open reading frame (7.4%) were similar, while it was higher in the Mad2 promoter region (9.9%). Analysis of the transcriptional elements within the Mad2 promoter region revealed variable STRE, PDS, degenerative TATA box, and TATA box-like regions, while this level of variation was not found for Mad1. Sequences were also phylogenetically compared to EF-1a, which is used for species identification, in 14 isolates representing 7 different species in the genus Metarhizium. Phylogenetic analysis demonstrated that the Mad2 phylogeny is more congruent with 59 EF-1a than Mad1. This would suggest that Mad2 has diverged among Metarhizium lineages, contributing to clade- and species-specific variation, while it appears that Mad1 has been largely conserved. While other abiotic and biotic factors cannot be excluded in contributing to divergence, these results suggest that plant relationships, rather than insect host, have been a major driving factor in the divergence of the genus Metarhizium.

Adhesion and transcellular migration of neutrophils and B lymphocytes on fibroblasts

During tissue inflammation, infiltrated leukocytes may have physical contacts with fibroblasts. We observed that neutrophils and B lymphocytes adhered in a larger proportion than T cells on cultured fibroblasts. Microscopy showed that adhesion was also characterized by leukocyte engulfment by the fibroblasts. In migration assays, only neutrophils and B lymphocytes were selectively able to migrate through a fibroblast barrier. Adhesion and migration were increased by stimulation with tumor necrosis factor-alpha (TNF-alpha) and phorbol-12-myristate-13-acetate (PMA). Antibodies against ICAM-1/beta2 integrin blocked the interaction of neutrophils to fibroblasts. For B lymphocytes the couple VCAM-1/alpha4 integrin was also involved in this interaction. Human skin fibroblasts presented similar adhesion characteristics as rat cardiac fibroblasts. By measuring the distance between the border of migration holes and cadherin-positive adherens junctions, more than 65% of the holes correspond to the transcellular route over the paracellular route. Furthermore, vimentin staining revealed that the migration holes were highly nested by intermediate filaments in accordance with the transcellular route. Our results demonstrated that engulfment of neutrophils and B lymphocytes by fibroblasts resulted in selective passage by a transcellular route.

Développement et évaluation d’un environnement informatisé d’apprentissage pour faciliter l’intégration des sciences et de la technologie

Par cette recherche, nous voulons évaluer de manière exhaustive les bénéfices qu’apporte l’ExAO (Expérimentation Assistée par Ordinateur) dans les laboratoires scolaires de sciences et technologie au Liban. Nous aimerions aussi qu’elle contribue d’une manière tangible aux recherches du laboratoire de Robotique Pédagogique de l’Université de Montréal, notamment dans le développement du µlaboratoire ExAO. Nous avons voulu tester les capacités de l’ExAO, son utilisation en situation de classe comme : 1. Substitut d’un laboratoire traditionnel dans l’utilisation de la méthode expérimentale; 2. Outil d’investigation scientifique; 3. Outil d’intégration des sciences expérimentales et des mathématiques; 4. Outil d’intégration des sciences expérimentales, des mathématiques et de la technologie dans un apprentissage technoscientifique; Pour ce faire, nous avons mobilisé 13 groupe-classes de niveaux complémentaire et secondaire, provenant de 10 écoles libanaises. Nous avons désigné leurs enseignants pour expérimenter eux-mêmes avec leurs étudiants afin d’évaluer, de manière plus réaliste les avantages d’implanter ce micro laboratoire informatisé à l’école. Les différentes mise à l’essai, évaluées à l’aide des résultats des activités d’apprentissage réalisées par les étudiants, de leurs réponses à un questionnaire et des commentaires des enseignants, nous montrent que : 1. La substitution d’un laboratoire traditionnel par un µlaboratoire ExAO ne semble pas poser de problème; dix minutes ont suffi aux étudiants pour se familiariser avec cet environnement, mentionnant que la rapidité avec laquelle les données étaient représentées sous forme graphique était plus productive. 2. Pour l’investigation d’un phénomène physique, la convivialité du didacticiel associée à la capacité d’amplifier le phénomène avant de le représenter graphiquement a permis aux étudiants de concevoir et de mettre en œuvre rapidement et de manière autonome, une expérimentation permettant de vérifier leur prédiction. 3. L’intégration des mathématiques dans une démarche expérimentale permet d’appréhender plus rapidement le phénomène. De plus, elle donne un sens aux représentations graphiques et algébriques, à l’avis des enseignants, permettant d’utiliser celle-ci comme outil cognitif pour interpréter le phénomène. 4. La démarche réalisée par les étudiants pour concevoir et construire un objet technologique, nous a montré que cette activité a été réalisée facilement par l’utilisation des capteurs universels et des amplificateurs à décalage de l’outil de modélisation graphique ainsi que la capacité du didacticiel à transformer toute variable mesurée par une autre variable (par exemple la variation de résistance en variation de température, …). Cette activité didactique nous montre que les étudiants n’ont eu aucune difficulté à intégrer dans une même activité d’apprentissage les mathématiques, les sciences expérimentales et la technologie, afin de concevoir et réaliser un objet technologique fonctionnel. µlaboratoire ExAO, en offrant de nouvelles possibilités didactiques, comme la capacité de concevoir, réaliser et valider un objet technologique, de disposer pour ce faire, des capacités nouvelles pour amplifier les mesures, modéliser les phénomènes physiques, créer de nouveaux capteurs, est un ajout important aux expériences actuellement réalisées en ExAO.

The Role of Second Generation Antiretroviral Drugs in HIV-1 Subtype B and non-B Variants Harboring Natural Polymorphisms and Drug Resistance Mutations.

Cette thèse traite de la résistance du VIH-1 aux antirétroviraux, en particulier de l'activité antivirale de plusieurs inhibiteurs non nucléosidiques de la transcriptase inverse (INNTI) ainsi que des inhibiteurs de protéase (IP). Nous avons exploré l’émergence et la spécificité des voies de mutations qui confèrent la résistance contre plusieurs nouveaux INNTI (étravirine (ETR) et rilpivirine (RPV)) (chapitres 2 et 3). En outre, le profil de résistance et le potentiel antirétroviral d'un nouvel IP, PL-100, est présenté dans les chapitres 4 et 5. Pour le premier projet, nous avons utilisé des sous-types B et non-B du VIH-1 pour sélectionner des virus résistants à ETR, et ainsi montré que ETR favorise l’émergence des mutations V90I, K101Q, E138K, V179D/E/F, Y181C, V189I, G190E, H221H/Y et M230L, et ce, en 18 semaines. Fait intéressant, E138K a été la première mutation à émerger dans la plupart des cas. Les clones viraux contenant E138K ont montré un faible niveau de résistance phénotypique à ETR (3,8 fois) et une diminution modeste de la capacité de réplication (2 fois) par rapport au virus de type sauvage. Nous avons également examiné les profils de résistance à ETR et RPV dans les virus contenant des mutations de résistance aux INNTI au début de la sélection. Dans le cas du virus de type sauvage et du virus contenant la mutation unique K103N, les premières mutations à apparaître en présence d’ETR ou de RPV ont été E138K ou E138G suivies d’autres mutations de résistance aux INNTI. À l’inverse, dans les mêmes conditions, le virus avec la mutation Y181C a évolué pour produire les mutations V179I/F ou A62V/A, mais pas E138K/G. L'ajout de mutations à la position 138 en présence de Y181C n'augmente pas les niveaux de résistance à ETR ou RPV. Nous avons également observé que la combinaison de Y181C et E138K peut conduire à un virus moins adapté par rapport au virus contenant uniquement Y181C. Sur la base de ces résultats, nous suggérons que les mutations Y181C et E138K peuvent être antagonistes. L’analyse de la résistance au PL-100 des virus de sous-type C et CRF01_AE dans les cellules en culture est décrite dans le chapitre 4. Le PL-100 sélectionne pour des mutations de résistance utilisant deux voies distinctes, l'une avec les mutations V82A et L90M et l'autre avec T80I, suivi de l’addition des mutations M46I/L, I54M, K55R, L76F, P81S et I85V. Une accumulation d'au moins trois mutations dans le rabat protéique et dans le site actif est requise dans chaque cas pour qu’un haut niveau de résistance soit atteint, ce qui démontre que le PL-100 dispose d'une barrière génétique élevée contre le développement de la résistance. Dans le chapitre 5, nous avons évalué le potentiel du PL-100 en tant qu’inhibiteur de protéase de deuxième génération. Les virus résistants au PL-100 émergent en 8-48 semaines alors qu’aucune mutation n’apparaît avec le darunavir (DRV) sur une période de 40 semaines. La modélisation moléculaire montre que la haute barrière génétique du DRV est due à de multiples interactions avec la protéase dont des liaison hydrogènes entre les groupes di-tétrahydrofuranne (THF) et les atomes d'oxygène des acides aminés A28, D29 et D30, tandis que la liaison de PL-100 est principalement basée sur des interactions polaires et hydrophobes délocalisées à travers ses groupes diphényle. Nos données suggèrent que les contacts de liaison hydrogène et le groupe di-THF dans le DRV, ainsi que le caractère hydrophobe du PL-100, contribuent à la liaison à la protéase ainsi qu’à la haute barrière génétique contre la résistance et que la refonte de la structure de PL-100 pour inclure un groupe di-THF pourrait améliorer l’activité antivirale et le profil de résistance.

Changes in Trunk Appearance After Scoliosis Spinal Surgery and Their Relation to Changes in Spinal Measurements

Study Design Retrospective study of surgical outcome. Objectives To evaluate quantitatively the changes in trunk surface deformities after scoliosis spinal surgery in Lenke 1A adolescent idiopathic scoliosis (AIS) patients and to compare it with changes in spinal measurements. Summary of Background Data Most studies documenting scoliosis surgical outcome used either radiographs to evaluate changes in the spinal curve or questionnaires to assess patients health-related quality of life. Because improving trunk appearance is a major reason for patients and their parents to seek treatment, this study focuses on postoperative changes in trunk surface deformities. Recently, a novel approach to quantify trunk deformities in a reliable, automatic, and noninvasive way has been proposed. Methods Forty-nine adolescents with Lenke 1A idiopathic scoliosis treated surgically were included. The back surface rotation and trunk lateral shift were computed on trunk surface acquisitions before and at least 6 months after surgery. We analyzed the effect of age, height, weight, curve severity, and flexibility before surgery, length of follow-up, and the surgical technique. For 25 patients with available three-dimensional (3D) spinal reconstructions, we compared changes in trunk deformities with changes in two-dimensional (2D) and 3D spinal measurements. Results The mean correction rates for the back surface rotation and the trunk lateral shift are 18% and 50%, respectively. Only the surgical technique had a significant effect on the correction rate of the back surface rotation. Direct vertebral derotation and reduction by spine translation provide a better correction of the rib hump (22% and 31% respectively) than the classic rod rotation technique (8%). The reductions of the lumbar Cobb angle and the apical vertebrae transverse rotation explain, respectively, up to 17% and 16% the reduction of the back surface rotation. Conclusions Current surgical techniques perform well in realigning the trunk; however, the correction of the deformity in the transverse plane proves to be more challenging. More analysis on the positive effect of vertebral derotation on the rib hump correction is needed. Level of evidence III.

A Novel Method for the 3-D Reconstruction of Scoliotic Ribs From Frontal and Lateral Radiographs

Among the external manifestations of scoliosis, the rib hump, which is associated with the ribs' deformities and rotations, constitutes the most disturbing aspect of the scoliotic deformity for patients. A personalized 3-D model of the rib cage is important for a better evaluation of the deformity, and hence, a better treatment planning. A novel method for the 3-D reconstruction of the rib cage, based only on two standard radiographs, is proposed in this paper. For each rib, two points are extrapolated from the reconstructed spine, and three points are reconstructed by stereo radiography. The reconstruction is then refined using a surface approximation. The method was evaluated using clinical data of 13 patients with scoliosis. A comparison was conducted between the reconstructions obtained with the proposed method and those obtained by using a previous reconstruction method based on two frontal radiographs. A first comparison criterion was the distances between the reconstructed ribs and the surface topography of the trunk, considered as the reference modality. The correlation between ribs axial rotation and back surface rotation was also evaluated. The proposed method successfully reconstructed the ribs of the 6th-12th thoracic levels. The evaluation results showed that the 3-D configuration of the new rib reconstructions is more consistent with the surface topography and provides more accurate measurements of ribs axial rotation.

Latex Stage Blending of Natural Rubber and Poly(Vinyl Chloride ) for Improved Mechanical Properties

A novel method of blending natural rubber with polyvinylchloride in the latex stage was developed, Dioctyl phthalate (DOP) and Amine terminated natural rubber (ATNR) were used as plasticisers, for improving the mechanical properties of these blends. Properties of the latex stage blends were compared with those of dry blends. Latex stage blends showed superior mechanical properties compared to the blends prepared in the dry state. The ageing resistance, oil resistance and processability were found to be improved by latex stage blending.

Characterization of Wastes from Natural Rubber and Rubber Wood Processing Industries and Their Utilization for Biomethanation

The research work which was carried out to characterization of wastes from natural rubber and rubber wood processing industries and their utilization for biomethanation. Environmental contamination is an inevitable consequence of human activity. The liquid and solid wastes from natural rubber based industries were: characterized and their use for the production of biogas investigated with a view to conserve conventional energy, and to mitigate environmental degradation.Rubber tree (flevea brasiliensis Muell. Arg.), is the most important commercial source of natural rubber and in india. Recently, pollution from the rubber processing factories has become very serious due to the introduction of modern methods and centralized group processing practices.The possibility of the use of spent slurry as organic manure is discussed.l0 percent level of PSD, the activity of cellulolytic, acid producing,proteolytic, lipolytic and methanogenic bacteria were more in the middle stage of methanogenesis.the liquid wastes from rubber processing used as diluents in combination with PSD, SPE promoted more biogas production with high methane content in the gas.The factors that favour methane production like TS, VS, cellulose and hemicellulose degradation were favoured in this treatment which led to higher methane biogenesis.The results further highlight ways and means to use agricultural wastes as alternative sources of energy.