The status of nine former C.I.D. students who are attending public high schools with hearing peers

This paper documents nine former CID students to evaluate the effectiveness of CID's program of preparation for mainstreaming. NOTE: Access to thesis is restricted. Contact Archives and Rare Books.

Genetically modified insect resistance in cotton: some farm level economic impacts in India

The paper explores the impact of insect-resistant Bacillus thuringiensis (Bt) cotton on costs and returns over the first two seasons of its commercial release in three sub-regions of Maharashtra State, India. It is the first such research conducted in India based on farmers' own practices rather than trial plots. Data were collected for a total of 7793 cotton plots in 2002 and 1577 plots in 2003. Results suggest that while the cost of cotton seed was much higher for farmers growing Bt cotton relative to those growing non-Bt cotton, the costs of bollworm spray were much lower. While Bt plots had greater costs (seed plus insecticide) than non-Bt plots, the yields and revenue from Bt plots were much higher than those of non-Bt plots (some 39% and 63% higher in 2002 and 2003, respectively). Overall, the gross margins of Bt plots were some 43% (2002) and 73% (2003) higher than those of non-Bt plots, although there was some variation between the three sub-regions of the state. The results suggest that Bt cotton has provided substantial benefits for farmers in India over the 2 years, but there are questions as to whether these benefits are sustainable. (c) 2004 Elsevier Ltd. All rights reserved.

Development of smart variable stiffness actuators using polymer hydrogels

In this work, compliant actuators are developed by coupling braided structures and polymer gels, able to produce work by controlled gel swelling in the presence of water. A number of aspects related to the engineering of gel actuators were studied, including gel selection, modelling and experimentation of constant force and constant displacement behaviour, and response time. The actuator was intended for use as vibration neutralizer: with this aim, generation of a force of 10 N in a time not exceeding a second was needed. Results were promising in terms of force generation, although response time was still longer than required. In addition, the easiest way to obtain the reversibility of the effect is still under discussion: possible routes for improvement are suggested and will be the object of future work.

Genetically modified insect resistance in cotton: some farm level economic impacts in India

The paper explores the impact of insect-resistant Bacillus thuringiensis (Bt) cotton on costs and returns over the first two seasons of its commercial release in three sub-regions of Maharashtra State, India. It is the first such research conducted in India based on farmers' own practices rather than trial plots. Data were collected for a total of 7793 cotton plots in 2002 and 1577 plots in 2003. Results suggest that while the cost of cotton seed was much higher for farmers growing Bt cotton relative to those growing non-Bt cotton, the costs of bollworm spray were much lower. While Bt plots had greater costs (seed plus insecticide) than non-Bt plots, the yields and revenue from Bt plots were much higher than those of non-Bt plots (some 39% and 63% higher in 2002 and 2003, respectively). Overall, the gross margins of Bt plots were some 43% (2002) and 73% (2003) higher than those of non-Bt plots, although there was some variation between the three sub-regions of the state. The results suggest that Bt cotton has provided substantial benefits for farmers in India over the 2 years, but there are questions as to whether these benefits are sustainable. (c) 2004 Elsevier Ltd. All rights reserved.

Some factors affecting reproductive success in crossbred dairy cows on smallholder farms in coastal north-east Tanzania

A 2-year longitudinal survey was carried out to investigate factors affecting reproduction in crossbred cows on smallholder farms in and around an urban centre. Sixty farms were visited at approximately 2-week intervals and details of reproductive traits and body condition score (BCS) were collected. Fifteen farms were within the town (U), 23 farms were approximately 5 km from town (SU), and 22 farms approximately 10 km from town (PU). Sources of variation in reproductive traits were investigated using a general linear model (GLM) by a stepwise forward selection and backward elimination approach to judge important independent variables. Factors considered for the first step of formulation of the model included location (PU, SU and U), type of insemination, calving season, BCS at calving, at 3 months postpartum and at 6 months postpartum, calving year, herd size category, source of labour (hired and family labour), calf rearing method (bucket and partial suckling) and parity number of the cow. The effects of the independent variables identified were then investigated using a non-parametric survival technique. The number of days to first oestrus was increased on the U site (p = 0.045) and when family labour was used (p = 0.02). The non-parametric test confirmed the effect of site (p = 0.059), but effect of labour was not significant. The number of days from calving to conception was reduced by hiring labour (p = 0.003) and using natural service (p = 0.028). The non-parametric test confirmed the effects of type of insemination (p = 0.0001) while also identifying extended calving intervals on U and SU sites (p = 0.014). Labour source was again non-significant. Calving interval was prolonged on U and SU sites (p = 0.021), by the use of AI (p = 0.031) and by the use of family labour (p = 0.001). The non-parametric test confirmed the effect of site (p = 0.008) and insemination type (p > 0.0001) but not of labour source. It was concluded that under favourable conditions (PU site, hired labour and natural service) calving intervals of around 440 days could be achieved.

The use of image analysis to estimate population growth rate in Daphnia magna

1. Population growth rate (PGR) is central to the theory of population ecology and is crucial for projecting population trends in conservation biology, pest management and wildlife harvesting. Furthermore, PGR is increasingly used to assess the effects of stressors. Image analysis that can automatically count and measure photographed individuals offers a potential methodology for estimating PGR. 2. This study evaluated two ways in which the PGR of Daphnia magna, exposed to different stressors, can be estimated using an image analysis system. The first method estimated PGR as the ratio of counts of individuals obtained at two different times, while the second method estimated PGR as the ratio of population sizes at two different times, where size is measured by the sum of the individuals' surface areas, i.e. total population surface area. This method is attractive if surface area is correlated with reproductive value (RV), as it is for D. magna, because of the theoretical result that PGR is the rate at which the population RV increases. 3. The image analysis system proved reliable and reproducible in counting populations of up to 440 individuals in 5 L of water. Image counts correlated well with manual counts but with a systematic underestimate of about 30%. This does not affect accuracy when estimating PGR as the ratio of two counts. Area estimates of PGR correlated well with count estimates, but were systematically higher, possibly reflecting their greater accuracy in the study situation. 4. Analysis of relevant scenarios suggested the correlation between RV and body size will generally be good for organisms in which fecundity correlates with body size. In these circumstances, area estimation of PGR is theoretically better than count estimation. 5. Synthesis and applications. There are both theoretical and practical advantages to area estimation of population growth rate when individuals' reproductive values are consistently well correlated with their surface areas. Because stressors may affect both the number and quality of individuals, area estimation of population growth rate should improve the accuracy of predicting stress impacts at the population level.

Adaptation and speciation: what can F-st tell us?

A useful way of summarizing genetic variability among different populations is through estimates of the inbreeding coefficient, F-st. Several recent studies have tried to use the distribution of estimates of F-st from individual genetic loci to detect the effects of natural selection. However, the promise of this approach has yet to be fully realized owing to the pervasive dogma that this distribution is highly dependent on demographic history. Here, I review recent theoretical results that indicate that the distribution of estimates of F-st is generally expected to be robust to the vagaries of demographic history. I suggest that analyses based on it provide a useful first step for identifying candidate genes that might be under selection, and explore the ways in which this information can be used in ecological and evolutionary studies.

Targeting C-reactive protein for the treatment of cardiovascular disease

Complement-mediated inflammation exacerbates the tissue injury of ischaemic necrosis in heart attacks and strokes, the most common causes of death in developed countries. Large infarct size increases immediate morbidity and mortality and, in survivors of the acute event, larger non-functional scars adversely affect long-term prognosis. There is thus an important unmet medical need for new cardioprotective and neuroprotective treatments. We have previously shown that human C-reactive protein (CRP), the classical acute-phase protein that binds to ligands exposed in damaged tissue and then activates complement(1), increases myocardial and cerebral infarct size in rats subjected to coronary or cerebral artery ligation, respectively(2,3). Rat CRP does not activate rat complement, whereas human CRP activates both rat and human complement(4). Administration of human CRP to rats is thus an excellent model for the actions of endogenous human CRP2,3. Here we report the design, synthesis and efficacy of 1,6-bis(phosphocholine)-hexane as a specific small-molecule inhibitor of CRP. Five molecules of this palindromic compound are bound by two pentameric CRP molecules, crosslinking and occluding the ligand-binding B-face of CRP and blocking its functions. Administration of 1,6-bis(phosphocholine)-hexane to rats undergoing acute myocardial infarction abrogated the increase in infarct size and cardiac dysfunction produced by injection of human CRP. Therapeutic inhibition of CRP is thus a promising new approach to cardioprotection in acute myocardial infarction, and may also provide neuroprotection in stroke. Potential wider applications include other inflammatory, infective and tissue-damaging conditions characterized by increased CRP production, in which binding of CRP to exposed ligands in damaged cells may lead to complement-mediated exacerbation of tissue injury.

Modelling requirements of supplier selection for benchmarking service provision

Supplier selection has a great impact on supply chain management. The quality of supplier selection also affects profitability of organisations which work in the supply chain. As suppliers can provide variety of services and customers demand higher quality of service provision, the organisation is facing challenges for making the right choice of supplier for the right needs. The existing methods for supplier selection, such as data envelopment analysis (DEA) and analytical hierarchy process (AHP) can automatically perform selection of competitive suppliers and further decide winning supplier(s). However, these methods are not capable of determining the right selection criteria which should be derived from the business strategy. An ontology model described in this paper integrates the strengths of DEA and AHP with new mechanisms which ensure the right supplier to be selected by the right criteria for the right customer's needs.

Parallel implementation and one year experiments with the Danish Eulerian Model

Large scale air pollution models are powerful tools, designed to meet the increasing demand in different environmental studies. The atmosphere is the most dynamic component of the environment, where the pollutants can be moved quickly on far distnce. Therefore the air pollution modeling must be done in a large computational domain. Moreover, all relevant physical, chemical and photochemical processes must be taken into account. In such complex models operator splitting is very often applied in order to achieve sufficient accuracy as well as efficiency of the numerical solution. The Danish Eulerian Model (DEM) is one of the most advanced such models. Its space domain (4800 × 4800 km) covers Europe, most of the Mediterian and neighboring parts of Asia and the Atlantic Ocean. Efficient parallelization is crucial for the performance and practical capabilities of this huge computational model. Different splitting schemes, based on the main processes mentioned above, have been implemented and tested with respect to accuracy and performance in the new version of DEM. Some numerical results of these experiments are presented in this paper.

The implications of service-dominant logic and integrated solutions on the sales function

This study explores the implications of an organization moving toward service-dominant logic (S-D logic) on the sales function. Driven by its customers’ needs, a service orientation by its nature requires personal interaction and sales personnel are in an ideal position to develop offerings with the customer. However, the development of S-D logic may require sales staff to develop additional skills. Employing a single case study, the study identified that sales personnel are quick to appreciate the advantages of S-D logic for customer satisfaction and six specific skills were highlighted and explored. Further, three propositions were identified: in an organization adopting S-D logic, the sales process needs to elicit needs at both embedded-value and value-in-use levels. In addition, the sales process needs to coproduce not just goods and service attributes but also attributes of the customer’s usage processes. Further, the sales process needs to coproduce not just goods and service attributes but also attributes of the customer’s usage processes.

Eyes, amygdala, and other models of face processing: Questions for the SIMS model

This commentary raises general questions about the parsimony and generalizability of the SIMS model, before interrogating the specific roles that the amygdala and eye contact play in it. Additionally, this situates the SIMS model alongside another model of facial expression processing, with a view to incorporating individual differences in emotion perception.