A reaction engineering approach to homogeneously catalyzed glycerol hydrochlorination

The production of biodiesel through transesterification has created a surplus of glycerol on the international market. In few years, glycerol has become an inexpensive and abundant raw material, subject to numerous plausible valorisation strategies. Glycerol hydrochlorination stands out as an economically attractive alternative to the production of biobased epichlorohydrin, an important raw material for the manufacturing of epoxy resins and plasticizers. Glycerol hydrochlorination using gaseous hydrogen chloride (HCl) was studied from a reaction engineering viewpoint. Firstly, a more general and rigorous kinetic model was derived based on a consistent reaction mechanism proposed in the literature. The model was validated with experimental data reported in the literature as well as with new data of our own. Semi-batch experiments were conducted in which the influence of the stirring speed, HCl partial pressure, catalyst concentration and temperature were thoroughly analysed and discussed. Acetic acid was used as a homogeneous catalyst for the experiments. For the first time, it was demonstrated that the liquid-phase volume undergoes a significant increase due to the accumulation of HCl in the liquid phase. Novel and relevant features concerning hydrochlorination kinetics, HCl solubility and mass transfer were investigated. An extended reaction mechanism was proposed and a new kinetic model was derived. The model was tested with the experimental data by means of regression analysis, in which kinetic and mass transfer parameters were successfully estimated. A dimensionless number, called Catalyst Modulus, was proposed as a tool for corroborating the kinetic model. Reactive flash distillation experiments were conducted to check the commonly accepted hypothesis that removal of water should enhance the glycerol hydrochlorination kinetics. The performance of the reactive flash distillation experiments were compared to the semi-batch data previously obtained. An unforeseen effect was observed once the water was let to be stripped out from the liquid phase, exposing a strong correlation between the HCl liquid uptake and the presence of water in the system. Water has revealed to play an important role also in the HCl dissociation: as water was removed, the dissociation of HCl was diminished, which had a retarding effect on the reaction kinetics. In order to obtain a further insight on the influence of water on the hydrochlorination reaction, extra semi-batch experiments were conducted in which initial amounts of water and the desired product were added. This study revealed the possibility to use the desired product as an ideal “solvent” for the glycerol hydrochlorination process. A co-current bubble column was used to investigate the glycerol hydrochlorination process under continuous operation. The influence of liquid flow rate, gas flow rate, temperature and catalyst concentration on the glycerol conversion and product distribution was studied. The fluid dynamics of the system showed a remarkable behaviour, which was carefully investigated and described. Highspeed camera images and residence time distribution experiments were conducted to collect relevant information about the flow conditions inside the tube. A model based on the axial dispersion concept was proposed and confronted with the experimental data. The kinetic and solubility parameters estimated from the semi-batch experiments were successfully used in the description of mass transfer and fluid dynamics of the bubble column reactor. In light of the results brought by the present work, the glycerol hydrochlorination reaction mechanism has been finally clarified. It has been demonstrated that the reactive distillation technology may cause drawbacks to the glycerol hydrochlorination reaction rate under certain conditions. Furthermore, continuous reactor technology showed a high selectivity towards monochlorohydrins, whilst semibatch technology was demonstrated to be more efficient towards the production of dichlorohydrins. Based on the novel and revealing discoveries brought by the present work, many insightful suggestions are made towards the improvement of the production of αγ-dichlorohydrin on an industrial scale.

Engineering an improved adenovirus packaging cell line

Recombinant human adenovirus (Ad) vectors are being extensively explored for their use in gene therapy and recombinant vaccines. Ad vectors are attractive for many reasons, including the fact that (1) they are relatively safe, based on their use as live oral vaccines, (2) they can accept large transgene inserts, (3) they can infect dividing and postmitotic cells, and (4) they can be produced to high titers. However, there are also a number of major problems associated with Ad vectors, including transient foreign gene expression due to host cellular immune responses, problems with humoral immunity, and the creation of replication competent adenoviruses (RCA). Most Ad vectors contain deletions in the E1 region that allow for insertion of a transgene. However, the E1 gene products are required for replication and thus must be supplied in trans by a helper ceillille that will allow for the growth and packaging of the defective virus. For this purpose the 293 cell line (Graham et al., 1977) is used most often; however, homologous recombination between the vector and the cell line often results in the generation of RCA. The presence of RCA in batches of adenoviral vectors for clinical use is a safety risk because tlley . may result in the mobilization and spread of the replication-defective vector viruses, and in significant tissue damage and pathogenicity. The present research focused on the alteration of the 293 cell line such that RCA formation can be eliminated. The strategy to modify the 293 cells involved the removal of the first 380 bp of the adenovirus genome through the process of homologous recombination. The first step towards this goal involved identifying and cloning the left-end cellular-viral jUl1ction from 293 cells to assemble sequences required for homologous recombination. Polymerase chain reaction (PCR) was performed to clone the junction, and the clone was verified through sequencing. The plasn1id PAM2 was then constructed, which served as the targeting cassette used to modify the 293 cells. The cassette consisted of (1) the cellular-viral junction as the left-end region of homology, (2) the neo gene to use for positive selection upon tranfection into 293 cells, (3) the adenoviral genome from bp 380 to bp 3438 as the right-end region of homology, and (4) the HSV-tk gene to use for negative selection. The plasmid PAM2 was linearized to produce a double strand break outside the region of homology, and transfected into 293 cells using the calcium-phosphate technique. Cells were first selected for their resistance to the drug G418, and subsequently for their resistance to the drug Gancyclovir (GANC). From 17 transfections, 100 pools of G418f and GANCf cells were picked using cloning lings and expanded for screening. Genomic DNA was isolated from the pools and screened for the presence of the 380 bps using PCR. Ten of the most promising pools were diluted to single cells and expanded in order to isolate homogeneous cell lines. From these, an additional 100 G41Sf and GANef foci were screened. These preliminary screening results appear promising for the detection of the desired cell line. Future work would include further cloning and purification of the promising cell lines that have potentially undergone homologous recombination, in order to isolate a homogeneous cell line of interest.

An exploration of interdisciplinary practice through an examination of specific disciplinary interpretations of stereotypic behaviour

As identified in the literature, a lack of understanding of the functional properties and triggers of stereotypic behaviour exists. When looking at this behaviour from an Applied Behaviour Analysis (ABA) framework, limitations are evident around identifying specific sensory modalities and functional properties of such behaviour. Antecedents particularly are difficult to identify and interpret. Therefore an interdisciplinary approach to assessment using two types of professional services commonly received by individuals with autism was proposed. However before this approach could be investigated the current interpretations of Stereo typic behaviour by each professional must be examined along with perceptions of interdisciplinary collaboration. The purpose of this study was to use an in-depth qualitative analysis to reveal the interpretations of stereotypy and collaboration from the perspectives of two particular professionals. The results of the study demonstrated that occupational therapists and behaviour analysts likely have different interpretations of the same behaviour,that consultation is the common model used to interact with other disciplines, and that professionals may have mixed feelings toward interdisciplinary practices as an approach to stereotypic behaviour. Strengths and limitations of the study were highlighted along with specific directions for future research.

Towards reverse engineering of Photosystem II: Synergistic Computational and Experimental Approaches

ABSTRACT Photosystem II (PSII) of oxygenic photosynthesis has the unique ability to photochemically oxidize water, extracting electrons from water to result in the evolution of oxygen gas while depositing these electrons to the rest of the photosynthetic machinery which in turn reduces CO2 to carbohydrate molecules acting as fuel for the cell. Unfortunately, native PSII is unstable and not suitable to be used in industrial applications. Consequently, there is a need to reverse-engineer the water oxidation photochemical reactions of PSII using solution-stable proteins. But what does it take to reverse-engineer PSII’s reactions? PSII has the pigment with the highest oxidation potential in nature known as P680. The high oxidation of P680 is in fact the driving force for water oxidation. P680 is made up of a chlorophyll a dimer embedded inside the relatively hydrophobic transmembrane environment of PSII. In this thesis, the electrostatic factors contributing to the high oxidation potential of P680 are described. PSII oxidizes water in a specialized metal cluster known as the Oxygen Evolving Complex (OEC). The pathways that water can take to enter the relatively hydrophobic region of PSII are described as well. A previous attempt to reverse engineer PSII’s reactions using the protein scaffold of E. coli’s Bacterioferritin (BFR) existed. The oxidation potential of the pigment used for the BFR ‘reaction centre’ was measured and the protein effects calculated in a similar fashion to how P680 potentials were calculated in PSII. The BFR-RC’s pigment oxidation potential was found to be 0.57 V, too low to oxidize water or tyrosine like PSII. We suggest that the observed tyrosine oxidation in BRF-RC could be driven by the ZnCe6 di-cation. In order to increase the efficiency of iii tyrosine oxidation, and ultimately oxidize water, the first potential of ZnCe6 would have to attain a value in excess of 0.8 V. The results were used to develop a second generation of BFR-RC using a high oxidation pigment. The hypervalent phosphorous porphyrin forms a radical pair that can be observed using Transient Electron Paramagnetic Resonance (TR-EPR). Finally, the results from this thesis are discussed in light of the development of solar fuel producing systems.

Engineering school notebook which belonged to S.D. Woodruff

Engineering school notebook which belonged to S.D. Woodruff. This book contains logarithm notes, plane trigonometry, surveying and content of land. The outer page is torn and the notebook is quite discoloured. This does not affect the text. It has no covers, n.d.

Engineering school notebook which belonged to S.D. Woodruf

Engineering school notebook which belonged to S.D. Woodruff. This book contains questions for exercise as well as other mathematical topics. It also contains a page which has the title “The Cataract of Niagara in North America” and quite a few pages of repetitive lines as in “writing lines”. Some of the pages are loose or torn and the notebook is discoloured. This does not affect the text. This book has no covers, n.d.

Estimate from the County of Welland to S.D. Woodruff for engineering services in marsh lands drainage for 1 year

Estimate from the County of Welland to S.D. Woodruff for engineering services in marsh lands drainage for 1 year, Dec. 1857.

Engineering services in marsh lands drainage for the months of October, November and December

Engineering services in marsh lands drainage for the months of October, November and December. This is signed by S.D. Woodruff, Dec. 31, 1856.

Engineering services in marsh lands drainage for the months of January, February, March and April for Fred Holmes, Joseph Simpson, D. Davidson, Rose Osborne, Henry Wilson and William Baird

Engineering services in marsh lands drainage for the months of January, February, March and April for Fred Holmes, Joseph Simpson, D. Davidson, Rose Osborne, Henry Wilson and William Baird. This is signed by S.D. Woodruff, May 1, 1857.

Engineering services in marsh lands drainage for the months of May, June, July and August 1857 for Fred Holmes, Joseph Simpson and William Baird

Engineering services in marsh lands drainage for the months of May, June, July and August 1857 for Fred Holmes, Joseph Simpson and William Baird. This is signed by S.D. Woodruff, Aug. 31, 1857.

Ideal timing to transfer from an acute care hospital to an interdisciplinary inpatient rehabilitation program following a stroke: an exploratory study

Affiliation: Dany Gagnon & Sylvie Nadeau: École de réadaptation, Faculté de médecine, Université de Montréal & Centre de recherche interdisciplinaire en réadaptation, Institut de réadaptation de Montréal

Contribuciones a la Engineering Education nacional e internacional y establecimiento de esta disciplina en México

Tesis (Doctorado en Filosofía con especialidad en Educación) -- U.A.N.L. ; Facultad de Filosofía y Letras, 2006.

La mise en marché des produits issus du génie tissulaire: Une question de catégorisation?

Le génie tissulaire est un domaine interdisciplinaire qui applique les principes du génie et des sciences de la vie (notamment la science des cellules souches) dans le but de régénérer et réparer les tissus et organes lésés. En d'autres mots, plutôt que de remplacer les tissus et les organes, on les répare. La recherche en génie tissulaire est considérable et les ambitions sont grandes, notamment celle de mettre fm aux listes d'attente de dons d'organes. Le génie tissulaire a déjà commencé à livrer des produits thérapeutiques pour des applications simples, notamment la peau et le cartilage. Les questions sur la façon de réglementer les produits thérapeutiques qui sont issus du génie tissulaire sont soulevées à chaque nouveau produit. À ce jour, ces questions ont reçu peu d'attention comparativement aux questions éthiques associées aux recherches avec les cellules souches et les risques qu'engendrent les produits biologiques. Il est donc important d'examiner si le cadre normatif qui entoure la mise en marché des produits issus du génie tissulaire est approprié puisque de tels produits sont déjà disponibles sur le marché et plusieurs autres sont en voie de l'être. Notre analyse révèle que le cadre canadien actuel n'est pas approprié et le moment d'une reforme est arrivé. Les États-Unis et l'Union européenne ont chacun des approches particulières qui sont instructives. Nous avons entrepris une revue des textes réglementaires qui encadrent la mise en marché des produits issus du génie tissulaire au Canada, aux États-Unis et dans l'Union européenne et formulons quelques suggestions de réforme.

L’assainissement écologique des eaux usées domestiques : scénario d’aménagement type pour les résidences isolées de pays développés nordiques

L’aménagement des systèmes d’assainissement conventionnel des eaux usées domestiques entraine actuellement la déplétion de ressources naturelles et la pollution des milieux récepteurs. L’utilisation d’une approche écosystémique plus globale telle que l’Assainissement Écologique, visant la fermeture du cycle de l’eau et des éléments nutritifs (phosphore et azote), contenus dans les excréments, par leur réutilisation à travers l’agriculture, permettrait d’améliorer de façon écologique cette situation. Toutefois, ce paradigme émergent est peu enseigné aux professionnels de l’aménagement responsables de sa planification, surtout au niveau de son application dans les pays développés nordiques. C’est pourquoi, afin d’améliorer la planification de ce type de système, il faut informer ces derniers des pratiques les plus adéquates à adopter. Pour y arriver, un scénario d’aménagement type a été développé à partir d’une revue exhaustive de la littérature et de l’analyse des données en se basant sur les recommandations de l’approche en fonction du contexte étudié. Ce scénario aidera les professionnels à mieux comprendre l’Assainissement Écologique et son aménagement. Il représente alors un point de départ pour les discussions interdisciplinaires et participatives que celui-ci requiert. En conclusion, il y a encore de nombreux manques d’informations concernant l’utilisation de traitements alternatifs dans les climats nordiques et l’acceptation de ceux-ci par les usagers. De plus, les cadres législatifs demeurent un obstacle considérable à l’aménagement d’un tel système. Cette recherche permet cependant de démystifier l’approche auprès des professionnels et pourrait aider à modifier certains cadres législatifs afin d’y intégrer sa philosophie.