Development of an animal repellent - selection, efficacy and presentation

Under some circumstances it may be desirable to repel herbivorous pests (e. g. goats and wallabies) from plants (e. g. horticultural or forestry seedlings) rather than to kill them. These circumstances may include using these animals as a resource at a later time, and there may also be welfare, public perception or legislative issues where repelling animals from particular plants or area is preferable to killing them. The first experiment tested the efficacy of 5 different materials (tiger fecal extract, maggot brew-the liquid exudate from a flyblown goat, capsaicin, dog urine, and burnt goat hair, skin and carcass+fat) to repel groups of goats in a feedlot pen from 1 trough of feed when another trough of feed was available to them to eat. Each repellent was tested on 5 groups of mixed age female goats for periods of 3 days. All 5 groups were exposed to the 5 repellents. Both tiger fecal extract and maggot brew reduced intake of feed from the 'protected' feed trough and significantly (P < 0.05) delayed 'normal' feeding behaviour by more than 5 h from that trough. The repellents became less effective with repeated use even with different groups of goats. The reduction in effectiveness was indicated by higher intakes of feed and earlier feeding from the protected trough. This habituation to the repellents, where the effectiveness is reduced with repeated exposure, is of concern. In the second experiment, we selected the most effective repellent (tiger fecal extract) and tested its efficacy under similar conditions, after the repellent had been mixed with a carrier (bentonite) in an endeavour to increase the duration of its effectiveness. This repellent was significantly more effective in repelling groups of 3 goats in a feedlot pen from 1 trough of feed for 3 days, when another trough of feed was available to them to eat.

The experiences and perceptions of fathers attending the birth and immediate care of their baby

Fathers in the United Kingdom (UK) usually attend the birth and immediate care of their baby. They also have an increasing presence during complicated and preterm childbirth, newborn resuscitation and early neonatal unit(NNU) care. However, there is limited evidence about the effect of these experiences on them. The aim of this study was to gain an understanding of the experiences of fathers encountering these situations. The study consisted of three phases and was undertaken in one National Health Service trust in the UK. Qualitative semi-structured interviews using a phenomenological approach were undertaken with 20 first-time fathers present at the delivery, resuscitation and/or admission of their baby to the NNU. Direct observations were made of 22 normal and complicated deliveries and initial newborn care and qualitative semi-structured interviews using the critical incident approach were undertaken with 37 health care professionals (HCPs). The study generated qualitative and quantitative data that were analysed accordingly. The findings show that most fathers were involved for at least some of the time and often spontaneously initiated their involvement. Their most important need was for information. They were usually more concerned about their partner, irrespective of the baby?s need for resuscitation and NNU care. To facilitate their involvement, fathers needed guidance and support from HCPs, particularly delivery suite midwives. Most HCPs recognised the needs of fathers and ways in which they could be helped to connect with their experience. However, these needs were not always met, usually because of inadequate staffing levels, a lack of resources or a mother-centred philosophy of care. The findings suggest the service often determines the extent to which fathers are involved. It is anticipated that these findings will inform HCP education and training and the development of both policy and health education thereby enhancing the quality of care provision for fathers.

Sales manager problem resolution styles:measure development and an examination of their salesperson-related consequences

Personal selling and sales management play a critical role in the short and long term success of the firm, and have thus received substantial academic interest since the 1970s. Sales research has examined the role of the sales manager in some depth, defining a number of key technical and interpersonal roles which sales managers have in influencing sales force effectiveness. However, one aspect of sales management which appears to remain unexplored is that of their resolution of salesperson-related problems. This study represents the first attempt to address this gap by reporting on the conceptual and empirical development of an instrument designed to measure sales managers' problem resolution styles. A comprehensive literature review and qualitative research study identified three key constructs relating to sales managers' problem resolution styles. The three constructs identified were termed; sales manager willingness to respond, sales manager caring, and sales manager aggressiveness. Building on this, existing literature was used to develop a conceptual model of salesperson-specific consequences of the three problem resolution style constructs. The quantitative phase of the study consisted of a mail survey of UK salespeople, achieving a total sample of 140 fully usable responses. Rigorous statistical assessment of the sales manager problem resolution style measures was undertaken, and construct validity examined. Following this, the conceptual model was tested using latent variable path analysis. The results for the model were encouraging overall, and also with regard to the individual hypotheses. Sales manager problem resolution styles were found individually to have significant impacts on the salesperson-specific variables of role ambiguity, emotional exhaustion, job satisfaction, organisational commitment and organisational citizenship behaviours. The findings, theoretical and managerial implications, limitations and directions for future research are discussed.

The development of a model system and high throughput assay for the study of interactions between zinc finger proteins and DNA

It has been recognised for some time that a full code of amino acid-based recognition of DNA sequences would be useful. Several approaches, which utilise small DNA binding motifs called zinc fingers, are presently employed. None of the current approaches successfully combine a combinatorial approach to the elucidation of a code with a single stage high throughput screening assay. The work outlined here describes the development of a model system for the study of DNA protein interactions and the development of a high throughput assay for detection of such interactions. A zinc finger protein was designed which will bind with high affinity and specificity to a known DNA sequence. For future work it is possible to mutate the region of the zinc finger responsible for the specificity of binding, in order to observe the effect on the DNA / protein interactions. The zinc finger protein was initially synthesised as a His tagged product. It was not possible however to develop a high throughput assay using the His tagged zinc finger protein. The gene encoding the zinc finger protein was altered and the protein synthesised as a Glutathione S-Transferase (GST) fusion product. A successful assay was developed using the GST protein and Scintillation Proximity Assay technology (Amersham Pharmacia Biotech). The scintillation proximity assay is a dynamic assay that allows the DNA protein interactions to be studied in "real time". This assay not only provides a high throughput method of screening zinc finger proteins for potential ligands but also allows the effect of addition of reagents or competitor ligands to be monitored.

Ophthalmic engineering:the development of novel instrumentation to further research in the field

The principle theme of this thesis is the advancement and expansion of ophthalmic research via the collaboration between professional Engineers and professional Optometrists. The aim has been to develop new and novel approaches and solutions to contemporary problems in the field. The work is sub divided into three areas of investigation; 1) High technology systems, 2) Modification of current systems to increase functionality, and 3) Development of smaller more portable and cost effective systems. High Technology Systems: A novel high speed Optical Coherence Tomography (OCT) system with integrated simultaneous high speed photography was developed achieving better operational speed than is currently available commercially. The mechanical design of the system featured a novel 8 axis alignment system. A full set of capture, analysis, and post processing software was developed providing custom analysis systems for ophthalmic OCT imaging, expanding the current capabilities of the technology. A large clinical trial was undertaken to test the dynamics of contact lens edge interaction with the cornea in-vivo. The interaction between lens edge design, lens base curvature, post insertion times and edge positions was investigated. A novel method for correction of optical distortion when assessing lens indentation was also demonstrated. Modification of Current Systems: A commercial autorefractor, the WAM-5500, was modified with the addition of extra hardware and a custom software and firmware solution to produce a system that was capable of measuring dynamic accommodative response to various stimuli in real time. A novel software package to control the data capture process was developed allowing real time monitoring of data by the practitioner, adding considerable functionality of the instrument further to the standard system. The device was used to assess the accommodative response differences between subjects who had worn UV blocking contact lens for 5 years, verses a control group that had not worn UV blocking lenses. While the standard static measurement of accommodation showed no differences between the two groups, it was determined that the UV blocking group did show better accommodative rise and fall times (faster), thus demonstrating the benefits of the modification of this commercially available instrumentation. Portable and Cost effective Systems: A new instrument was developed to expand the capability of the now defunct Keeler Tearscope. A device was developed that provided a similar capability in allowing observation of the reflected mires from the tear film surface, but with the added advantage of being able to record the observations. The device was tested comparatively with the tearscope and other tear film break-up techniques, demonstrating its potential. In Conclusion: This work has successfully demonstrated the advantages of interdisciplinary research between engineering and ophthalmic research has provided new and novel instrumented solutions as well as having added to the sum of scientific understanding in the ophthalmic field.

Horizontal diversity of higher education institutions. The case of Hungary – in European context

In the European Higher Education Area the diversification of higher education is considered to be an emphasized value, a guarantee of creativity. The various institutional rankings are the displays of vertical diversity, but in parallel with these, there is an increasing attention directed at horizontal diversity, the entirety of the institutions' activities. The European Mapping Project (U-map) undertook this challenge. The paper presents the research program, which is an attempt to adapt the U-map model to Hungary. According to the results, the U-map method which was intended for application on an international level, is very useful in the identification of the main groups of institutions in a specific national higher education system as well, and may provide a basis for the creation of institutional strategies and the development of the institutions’ network.

Effects of ocean acidification on embryonic respiration and development of a temperate wrasse living along a natural CO2 gradient

Volcanic CO2 seeps provide opportunities to investigate the effects of ocean acidification on organisms in the wild. To understand the influence of increasing CO2 concentrations on the metabolic rate (oxygen consumption) and the development of ocellated wrasse early life stages, we ran two field experiments, collecting embryos from nesting sites with different partial pressures of CO2 [pCO2; ambient (400 µatm) and high (800-1000 µatm)] and reciprocally transplanting embryos from ambient- to high-CO2 sites for 30 h. Ocellated wrasse offspring brooded in different CO2 conditions had similar responses, but after transplanting portions of nests to the high-CO2 site, embryos from parents that spawned in ambient conditions had higher metabolic rates. Although metabolic phenotypic plasticity may show a positive response to high CO2, it often comes at a cost, in this case as a smaller size at hatching. This can have adverse effects because smaller larvae often exhibit a lower survival in the wild. However, the adverse effects of increased CO2 on metabolism and development did not occur when embryos from the high-CO2 nesting site were exposed to ambient conditions, suggesting that offspring from the high-CO2 nesting site could be resilient to a wider range of pCO2 values than those belonging to the site with present-day pCO2 levels. Our study identifies a crucial need to increase the number of studies dealing with these processes under global change trajectories and to expand these to naturally high-CO2 environments, in order to assess further the adaptive plasticity mechanism that encompasses non-genetic inheritance (epigenetics) through parental exposure and other downstream consequences, such as survival of larvae.

Development of miniaturized antennas and adaptive tuning solutions for body sensor network applications

Wireless Sensor Networks (WSNs) are currently having a revolutionary impact in rapidly emerging wearable applications such as health and fitness monitoring amongst many others. These types of Body Sensor Network (BSN) applications require highly integrated wireless sensor devices for use in a wearable configuration, to monitor various physiological parameters of the user. These new requirements are currently posing significant design challenges from an antenna perspective. This work addresses several design challenges relating to antenna design for these types of applications. In this thesis, a review of current antenna solutions for WSN applications is first presented, investigating both commercial and academic solutions. Key design challenges are then identified relating to antenna size and performance. A detailed investigation of the effects of the human body on antenna impedance characteristics is then presented. A first-generation antenna tuning system is then developed. This system enables the antenna impedance to be tuned adaptively in the presence of the human body. Three new antenna designs are also presented. A compact, low-cost 433 MHz antenna design is first reported and the effects of the human body on the impedance of the antenna are investigated. A tunable version of this antenna is then developed, using a higher performance, second-generation tuner that is integrated within the antenna element itself, enabling autonomous tuning in the presence of the human body. Finally, a compact sized, dual-band antenna is reported that covers both the 433 MHz and 2.45 GHz bands to provide improved quality of service (QoS) in WSN applications. To date, state-of-the-art WSN devices are relatively simple in design with limited antenna options available, especially for the lower UHF bands. In addition, current devices have no capability to deal with changing antenna environments such as in wearable BSN applications. This thesis presents several contributions that advance the state-of-the-art in this area, relating to the design of miniaturized WSN antennas and the development of antenna tuning solutions for BSN applications.

Development of a Wireless MEMS Multifunction Sensor System and Field Demonstration of Embedded Sensors for Monitoring Concrete Pavements, TR-637, 2016

Pavements tend to deteriorate with time under repeated traffic and/or environmental loading. By detecting pavement distresses and damage early enough, it is possible for transportation agencies to develop more effective pavement maintenance and rehabilitation programs and thereby achieve significant cost and time savings. The structural health monitoring (SHM) concept can be considered as a systematic method for assessing the structural state of pavement infrastructure systems and documenting their condition. Over the past several years, this process has traditionally been accomplished through the use of wired sensors embedded in bridge and highway pavement. However, the use of wired sensors has limitations for long-term SHM and presents other associated cost and safety concerns. Recently, micro-electromechanical sensors and systems (MEMS) and nano-electromechanical systems (NEMS) have emerged as advanced/smart-sensing technologies with potential for cost-effective and long-term SHM. This two-pronged study evaluated the performance of commercial off-the-shelf (COTS) MEMS sensors embedded in concrete pavement (Final Report Volume I) and developed a wireless MEMS multifunctional sensor system for health monitoring of concrete pavement (Final Report Volume II).

Gestão da disciplina : um desafio a refletir na formação do docente generalista

Relatório de Estágio apresentado à Escola Superior de Educação de Paula Frassinetti para obtenção do grau de Mestre em Educação Pré-Escolar e Ensino do 1º Ciclo do Ensino Básico,sob orientação da Professora Doutora Brigite Carvalho da Silva |Mestre Maria dos Reis Gomes

Prática educativa em educação pré-escolar e no 1º ciclo do ensino básico : o jogo de justiça cognitiva

Relatório de Estágio apresentado à Escola Superior de Educação de Paula Frassinetti para obtenção de grau Mestre em Educação Pré-Escolar e Ensino 1º ciclo do Ensino Básico

A formação de um docente generalista : um novo paradigma do ensino

Relatório de Estágio apresentado à Escola Superior de Educação de Paula Frassinetti para obtenção de grau Mestre em Educação Pré-Escolar e Ensino 1º ciclo do Ensino Básico.