Design and Development of a Research Framework for Prototyping Control Tower Augmented Reality Tools

The purpose of the air traffic management system is to ensure the safe and efficient flow of air traffic. Therefore, while augmenting efficiency, throughput and capacity in airport operations, attention has rightly been placed on doing it in a safe manner. In the control tower, many advances in operational safety have come in the form of visualization tools for tower controllers. However, there is a paradox in developing such systems to increase controllers' situational awareness: by creating additional computer displays, the controller's vision is pulled away from the outside view and the time spent looking down at the monitors is increased. This reduces their situational awareness by forcing them to mentally and physically switch between the head-down equipment and the outside view. This research is based on the idea that augmented reality may be able to address this issue. The augmented reality concept has become increasingly popular over the past decade and is being proficiently used in many fields, such as entertainment, cultural heritage, aviation, military & defense. This know-how could be transferred to air traffic control with a relatively low effort and substantial benefits for controllers’ situation awareness. Research on this topic is consistent with SESAR objectives of increasing air traffic controllers’ situation awareness and enable up to 10 % of additional flights at congested airports while still increasing safety and efficiency. During the Ph.D., a research framework for prototyping augmented reality tools was set up. This framework consists of methodological tools for designing the augmented reality overlays, as well as of hardware and software equipment to test them. Several overlays have been designed and implemented in a simulated tower environment, which is a virtual reconstruction of Bologna airport control tower. The positive impact of such tools was preliminary assessed by means of the proposed methodology.

Application of augmented reality in craniofacial surgery: a feasibility study

Augmented Reality (AR) is a novel promising technology, which is gaining success in the medical field. A number of applications in surgery have been described, but few studies have been focusing on pediatric craniofacial surgery. In this research project, the Authors have been implementing a system for intraoperative surgical navigation by means of HoloLens 2 by Microsoft, applied to pediatric craniofacial surgery. The Authors tested the device in a preclinical setting first, and then moved to patients. The Authors assessed the accuracy of the HoloLens 2 by performing 36 procedures in vitro on a printed 3D model of a patient. In clinical setting, 10 patients were prospectively enrolled in the study. The virtual surgical planning was designed for each patient and uploaded onto the software which allows for the AR interface and the standard neurosurgical navigator. For each patient, the surgeon has been drawing osteotomy lines both under the guidance of HoloLens2 and of the neurosurgical navigator. The Author then checked the accuracy with calibrated CAD CAM cutting guides with different grooves, in order to assess the accuracy of the osteotomies performed. We tested levels of accuracy of ±1.5 mm and ±1mm . In the preclinical setting, the HoloLens 2 performed with levels of accuracy of 1.5 mm, whereas in the real setting, surgeons were able to trace the osteotomy lines under the AR guidance for an amount of 45% (0.4 SD) of the entire line, with an accuracy level of ±1.5 mm. This percentage lowers to 34% (0.4 SD) when assessing accuracy level of ±1 mm. The results of the same tasks for the standard navigator are 36% and 16%, for ±1.5 mm and ± 1 mm accuracy level, respectively. The Authors reported encouraging results both in the preclinical and the clinical setting.

Enhanced switchgear connection testing through augmented reality: early developments

Augmented reality is an emerging field of interactive design in which virtual material is seamlessly blended with displays of real world environments. The tremendous potential of augmented reality has begun to be explored with the emergence of personal mobile devices capable of constructing engaging augmented reality experiences. This work is part of a project aiming at using augmented reality goggles to bring advance information to the user interacting with switch-gear during automation cabling. In particular we will be focusing on the recognition and definition of the figures of the component on the AR device. In this part we are using standard camera that allows us to get real images and helps us to localize the gearbox in space through ARUCO marker and we can exploit in order to re-project the actual shape of the component that are currently interested in manipulation by exploiting the data provided by the database. The experiments are carried out using the camera to get the images of the real world switch-gear and re-project those images with the component superimposed on it. Using transforms of the database we did localization to re-project the rendered image of component exactly on the real world component, which can be further integrated in AR goggles to see the component superimposed in real-time.

Avoiding Pitfalls Of Intraoperative Peripheral Endovascular Surgery With The Aid Of Osirix: Expanding The Use Of Virtual Fluoroscopy.

We have shown how the analysis of the angiotomography reconstruction through OsiriX program has assisted in endovascular perioperative programming. We presented its application in situations when an unexpected existence of metallic overlapping artifact (orthopedic osteosynthesis) compromised the adequate visualization of the arterial lesion during the procedure. Through manipulation upon OsiriX software, with assistance of preview under virtual fluoroscopy, it was possible to obtain the angles that would avoid this juxtaposition. These angles were reproduced in the C-arm, allowing visualization of the occluded segment, reducing the need for repeated image acquisitions and contrast overload, allowing the continuation of the procedure.

O ambiente virtual de aprendizagem e sua incorporação na Unicamp

The text describes a study about the adoption of virtual learning environments and its consequences to the learning process of undergraduate students at the State University of Campinas - Unicamp. These environments can be incorporated in various ways into the academic daily life of students and teachers. One efficient way to promote the adoption of these environments, as observed by the Distance Learning support team, is to train teachers and students in their use. Two training alternatives are described in this text to instruct the academic community in the use of TelEduc, a freeware developed and coordinated by the NIED - Núcleo de Informática Aplicada à Educação (Center for Information Technology Applied to Education), and officially adopted by Unicamp. Training courses are offered in two ways - presence or distance learning - to suit each teacher's preferences. This article compares the two modes of training, showing their strong and weak points. The adoption of TelEduc and its direct consequences to the learning process are described in a study carried out with some engineering undergraduates at Unicamp. The authors' questions and the general views of teachers and students regarding the effectiveness of the use of TelEduc as a supporting tool to presence teaching are presented. This investigation revealed the importance of training teachers in the effective use of these environments.

Centro esportivo virtual : um recurso de informação em educação fisica e esportes na internet

Universidade Estadual de Campinas . Faculdade de Educação Física

Students' collective knowledge construction in the virtual learning environment ""ToLigado - your school interactive newspaper""

Introduction. The ToLigado Project - Your School Interactive Newspaper is an interactive virtual learning environment conceived, developed, implemented and supported by researchers at the School of the Future Research Laboratory of the University of Sao Paulo, Brazil. Method. This virtual learning environment aims to motivate trans-disciplinary research among public school students and teachers in 2,931 schools equipped with Internet-access computer rooms. Within this virtual community, students produce collective multimedia research documents that are immediately published in the portal. The project also aims to increase students' autonomy for research, collaborative work and Web authorship. Main sections of the portal are presented and described. Results. Partial results of the first two years' implementation are presented and indicate a strong motivation among students to produce knowledge despite the fragile hardware and software infrastructure at the time. Discussion. In this new environment, students should be seen as 'knowledge architects' and teachers as facilitators, or 'curiosity managers'. The ToLigado portal may constitute a repository for future studies regarding student attitudes in virtual learning environments, students' behaviour as 'authors', Web authorship involving collective knowledge production, teachers' behaviour as facilitators, and virtual learning environments as digital repositories of students' knowledge construction and social capital in virtual learning communities.

Evaluation of plaque composition by intravascular ultrasound ""virtual histology"": the impact of dense calcium on the measurement of necrotic tissue

Aims: We aimed to evaluate if the co-localisation of calcium and necrosis in intravascular ultrasound virtual histology (IVUS-VH) is due to artefact, and whether this effect can be mathematically estimated. Methods and results: We hypothesised that, in case calcium induces an artefactual coding of necrosis, any addition in calcium content would generate an artificial increment in the necrotic tissue. Stent struts were used to simulate the ""added calcium"". The change in the amount and in the spatial localisation of necrotic tissue was evaluated before and after stenting (n=17 coronary lesions) by means of a especially developed imaging software. The area of ""calcium"" increased from a median of 0.04 mm(2) at baseline to 0.76 mm(2) after stenting (p<0.01). In parallel the median necrotic content increased from 0.19 mm(2) to 0.59 mm(2) (p<0.01). The ""added"" calcium strongly predicted a proportional increase in necrosis-coded tissue in the areas surrounding the calcium-like spots (model R(2)=0.70; p<0.001). Conclusions: Artificial addition of calcium-like elements to the atherosclerotic plaque led to an increase in necrotic tissue in virtual histology that is probably artefactual. The overestimation of necrotic tissue by calcium strictly followed a linear pattern, indicating that it may be amenable to mathematical correction.

Molecular dynamics, density functional, ADMET predictions, virtual screening, and molecular interaction field studies for identification and evaluation of novel potential CDK2 inhibitors in cancer therapy

In this work, we have used molecular dynamics, density functional theory, virtual screening, ADMET predictions, and molecular interaction field studies to design and propose eight novel potential inhibitors of CDK2. The eight molecules proposed showed interesting structural characteristics that are required for inhibiting the CDK2 activity and show potential as drug candidates for the treatment of cancer. The parameters related to the Rule of Five were calculated, and only one of the molecules violated more than one parameter. One of the proposals and one of the drug-like compounds selected by virtual screening indicated to be promising candidates for CDK2-based cancer therapy.

Use of virtual screening, flexible docking, and molecular interaction fields to design novel HMG-CoA reductase inhibitors for the treatment of hypercholesterolemia

Dietary changes associated with drug therapy can reduce high serum cholesterol levels and dramatically decrease the risk of coronary artery disease, stroke, and overall mortality. Statins are hypolipemic drugs that are effective in the reduction of cholesterol serum levels, attenuating cholesterol synthesis in liver by competitive inhibition regarding the substrate or molecular target HMG-CoA reductase. We have herewith used computer-aided molecular design tools, i.e., flexible docking, virtual screening in large data bases, molecular interaction fields to propose novel potential HMG-CoA reductase inhibitors that are promising for the treatment of hypercholesterolemia.

Molecular dynamics, flexible docking, virtual screening, ADMET predictions, and molecular interaction field studies to design novel potential MAO-B inhibitors

Monoamine oxidase is a flavoenzyme bound to the mitochondrial outer membranes of the cells, which is responsible for the oxidative deamination of neurotransmitter and dietary amines. It has two distinct isozymic forms, designated MAO-A and MAO-B, each displaying different substrate and inhibitor specificities. They are the well-known targets for antidepressant, Parkinson`s disease, and neuroprotective drugs. Elucidation of the x-ray crystallographic structure of MAO-B has opened the way for the molecular modeling studies. In this work we have used molecular modeling, density functional theory with correlation, virtual screening, flexible docking, molecular dynamics, ADMET predictions, and molecular interaction field studies in order to design new molecules with potential higher selectivity and enzymatic inhibitory activity over MAO-B.

The interorganizational virtual organization: Defining a Weberian ideal

The concept of the virtual organization (VO) has engendered great interest in the literature, yet there is still little common understanding of the concept, as evidenced by the multitude of labels applied to VOs. In this article, we focus on a “Weberian-ideal-type” definition of the interorganizational VO, posited in our earlier work (Kasper-Fuehrer and Ashkanasy 2001). We argue, however, that this definition left unanswered critical questions relating to the nature and effects of interorganizational VOs. We answer these questions here by explicating the terms in the definition and deriving ten corollaries, or “natural consequences” of our definition. The corollaries posit that interorganizational VOs are temporary in nature, are network organizations, are independent, and are based on swift trust. We suggest further that interorganizational VOs enable small to medium enterprises to exploit market opportunities, and enable VO member organizations to create a value-adding partnership. We also identify information and communication technology (ICT) as the essential enabler of VOs. Finally, we argue that interorganizational VOs act as a single organizational unit and that they therefore constitute a uniquely distinguishable organizational form. We conclude with suggestions for further research, including trust, organizational behavior, transaction economics, virtual HRM, and business strategy.