Reliable and Damage-Free Estimation of Resistivity of ZnO Thin Films for Photovoltaic Applications Using Photoluminescence Technique

This work projects photoluminescence (PL) as an alternative technique to estimate the order of resistivity of zinc oxide (ZnO) thin films. ZnO thin films, deposited using chemical spray pyrolysis (CSP) by varying the deposition parameters like solvent, spray rate, pH of precursor, and so forth, have been used for this study. Variation in the deposition conditions has tremendous impact on the luminescence properties as well as resistivity. Two emissions could be recorded for all samples—the near band edge emission (NBE) at 380 nm and the deep level emission (DLE) at ∼500 nm which are competing in nature. It is observed that the ratio of intensities of DLE to NBE ( DLE/ NBE) can be reduced by controlling oxygen incorporation in the sample. - measurements indicate that restricting oxygen incorporation reduces resistivity considerably. Variation of DLE/ NBE and resistivity for samples prepared under different deposition conditions is similar in nature. DLE/ NBE was always less than resistivity by an order for all samples.Thus from PL measurements alone, the order of resistivity of the samples can be estimated.

A STUDY OF THE TECHNIQUE OF THE HINDI DRAMA POST PRASAD PERIOD (1935 - 1965)

Hindi

THE PDETICAL WORKS DF GIRI-IA KUMAR MATHUR: SENSIBILITY AND TECHNIQUE

HINDI

The Surface Plasmon Resonance of Supported Noble Metal Nanoparticles: Characterization, Laser Tailoring, and SERS Application

This work deals with the optical properties of supported noble metal nanoparticles, which are dominated by the so-called Mie resonance and are strongly dependent on the particles’ morphology. For this reason, characterization and control of the dimension of these systems are desired in order to optimize their applications. Gold and silver nanoparticles have been produced on dielectric supports like quartz glass, sapphire and rutile, by the technique of vapor deposition under ultra-high vacuum conditions. During the preparation, coalescence is observed as an important mechanism of cluster growth. The particles have been studied in situ by optical transmission spectroscopy and ex situ by atomic force microscopy. It is shown that the morphology of the aggregates can be regarded as oblate spheroids. A theoretical treatment of their optical properties, based on the quasistatic approximation, and its combination with results obtained by atomic force microscopy give a detailed characterization of the nanoparticles. This method has been compared with transmission electron microscopy and the results are in excellent agreement. Tailoring of the clusters’ dimensions by irradiation with nanosecond-pulsed laser light has been investigated. Selected particles are heated within the ensemble by excitation of the Mie resonance under irradiation with a tunable laser source. Laser-induced coalescence prevents strongly tailoring of the particle size. Nevertheless, control of the particle shape is possible. Laser-tailored ensembles have been tested as substrates for surface-enhanced Raman spectroscopy (SERS), leading to an improvement of the results. Moreover, they constitute reproducible, robust and tunable SERS-substrates with a high potential for specific applications, in the present case focused on environmental protection. Thereby, these SERS-substrates are ideally suited for routine measurements.

Ions of the superheavy elements in vacuum and in solution

The extension of the Periodic Table into the range of unknown atomic numbers of above one hundred requires relativistic calculations. The results of the latter are used to indicate probable values for X-ray transition lines which will be useful for identification of the atomic species formed during collision between accelerated ions and the target. If the half-lives of the isotopes are long, then the chemistry of these new species becomes an important question which is reviewed for E110, E 111 and E112. The possible structural chemistry of the elements E108 to E112 is suggested. Finally the effects of solvation on ions of the actinide and superheavy elements have been studied.

Optical Characterization of Organic Gain Materials for UV-emitting Hybrid Complex Coupled VCSELs

In this thesis, optical gain measurement setup based on variable stripe length method is designed, implemented and improved. The setup is characterized using inorganic and organic samples. The optical gain of spiro-quaterphenyl is calculated and compared with measurements from the setup. Films with various thicknesses of spiro-quaterphenyl, methoxy-spiro-quaterphenyl and phenoxy-spiro-quaterphenyl are deposited by a vacuum vapor deposition technique forming asymmetric slab waveguides. The optical properties, laser emission threshold, optical gain and loss coefficient for these films are measured. Additionally, the photodegradation during pumping process is investigated.

A pilot investigation of the relationship between climate variability and milk compounds under the bootstrap technique

This study analyzes the linear relationship between climate variables and milk components in Iran by applying bootstrapping to include and assess the uncertainty. The climate parameters, Temperature Humidity Index (THI) and Equivalent Temperature Index (ETI) are computed from the NASA-Modern Era Retrospective-Analysis for Research and Applications (NASA-MERRA) reanalysis (2002–2010). Milk data for fat, protein (measured on fresh matter bases), and milk yield are taken from 936,227 milk records for the same period, using cows fed by natural pasture from April to September. Confidence intervals for the regression model are calculated using the bootstrap technique. This method is applied to the original times series, generating statistically equivalent surrogate samples. As a result, despite the short time data and the related uncertainties, an interesting behavior of the relationships between milk compound and the climate parameters is visible. During spring only, a weak dependency of milk yield and climate variations is obvious, while fat and protein concentrations show reasonable correlations. In summer, milk yield shows a similar level of relationship with ETI, but not with temperature and THI. We suggest this methodology for studies in the field of the impacts of climate change and agriculture, also environment and food with short-term data.

Study on Granular Dynamics in Vertically Vibrated Beds using Tracking Technique

The study of granular material is of great interest to many researchers in both engineering and science communities. The importance of such a study derives from its complex rheological character and also its significant role in a wide range of industrial applications, such as coal, food, plastics, pharmaceutical, powder metallurgy and mineral processing. A number of recent reports have been focused on the physics of non-cohesive granular material submitted to vertical vibration in either experimental or theoretical approaches. Such a kind of system can be used to separate, mix and dry granular materials in industries. It exhibits different instability behaviour on its surface when under vertical vibration, for example, avalanching, surface fluidization and surface wave, and these phenomena have attracted particular interest of many researchers. However, its fundamental understanding of the instability mechanism is not yet well-understood. This paper is therefore to study the dynamics of granular motion in such a kind of system using Positron Emission Particle Tracking (PEPT), which allows the motion of a single tracer particle to be followed in a non-invasive way. Features of the solids motion such as cycle frequency and dispersion index were investigated via means of authors’ specially-written programmes. Regardless of the surface behaviour, particles are found to travel in rotational movement in horizontal plane. Particle cycle frequency is found to increase strongly with increasing vibration amplitude. Particle dispersion also increased strongly with vibration amplitude. Horizontal dispersion is observed to always exceed vertical dispersion.

Implementation of a robust coded structured light technique for dynamic 3D measurements

This paper presents the implementation details of a coded structured light system for rapid shape acquisition of unknown surfaces. Such techniques are based on the projection of patterns onto a measuring surface and grabbing images of every projection with a camera. Analyzing the pattern deformations that appear in the images, 3D information of the surface can be calculated. The implemented technique projects a unique pattern so that it can be used to measure moving surfaces. The structure of the pattern is a grid where the color of the slits are selected using a De Bruijn sequence. Moreover, since both axis of the pattern are coded, the cross points of the grid have two codewords (which permits to reconstruct them very precisely), while pixels belonging to horizontal and vertical slits have also a codeword. Different sets of colors are used for horizontal and vertical slits, so the resulting pattern is invariant to rotation. Therefore, the alignment constraint between camera and projector considered by a lot of authors is not necessary

Exam preparation - Technique

These slides give general tips on exam technique in the context of feedback from a previous exam the students took

Implementation of ‘School Back’ by the ‘Core’ technique in a factory of geotextiles to prevent back pain

Introduction: This article aims to show an alternative intervention for the prevention and control of back pain to the people of a production plant of geotextiles for the construction exposed to handling and awkward postures through the implementation of the Back School using the CORE technique. This technique being understood as trainer of the stability musculature of the spine; whose benefit is proportionate the muscular complex of the back, stability and avoid osteomuscular lesions and improved posture. Objective: To present the results about the implementation of the back school by the CORE technique for prevention of back pain in a population of forty-eight male collaborators. Materials and methods: The back school began with talks of awareness by the occupational health physician explaining the objectives and benefits of it to all participants. Once this activity was done, was continued to evaluate all plant employees to establish health status through the PAR-Q questionnaire, who were surveyed for the perception of pain using visual analog scale (VAS) and stability was determined column through the CORE assessment, to determine the training plan. Then, were made every six months the revaluations and implementation of a survey of assistant public perception to identify the impact of the implementation of the school back on the two variables referred (pain perception and stability of column). Results: The pain perception according VAS increased in the number of workers asymptomatic in 12% and based in the satisfaction survey 94% of population reported that with the development of this technique decrease the muscle fatigue in lumbar level; and 96% of population reported an improvement in the performance of their work activities. Discussion: Posterior to the analysis of all results, it is interpreted that back schools practice through CORE technique, contributes to the prevention and / or control of symptoms at the lumbar level in population of productive sector exposed to risks derived from the physical load, provided that ensure its continuously development and supervised for a competent professional.

Verbal reasoning : technique and practice 1.

Dirigido a alumnos de enseñanza secundaria, presenta la técnica y la práctica para la resolución de ejercicios de razonamiento verbal. Incluye trece de los treinta y cinco tipos de preguntas que se pueden encontrar en los exámenes oficiales (los volúmenes 2, 3 y 4 de la misma serie tratan los otros tipos) en el área de lengua. Para cada tipo de ejercicio explica el objetivo del mismo y la técnica que se debe seguir para su realización, con ejemplos y notas aclaratorias, y a continuación presenta un ejercicio práctico para aplicar dicha técnica. Al final del libro hay una tabla para apuntar los resultados de cada test y controlar el progreso del alumno, y un apartado con las soluciones.

El estudio de los roles y funciones de los orientadores de secundaria utilizando la técnica de los grupos de discusión. 'The study of duties and roles of highschool counsellors by using the technique of focus groups'.

Resumen tomado de la publicación. Con el apoyo económico del departamento MIDE de la UNED

The Use of Literature as an Advanced Technique for Teaching English in the EFL-ESL Classroom. 'El uso de la literatura como técnica avanzada para la enseñanza del inglés como segunda lengua en el aula'.

Monográfico con el título: 'Patrimonio y Educación'. Resumen basado en el de la publicación