703 resultados para uréia
Resumo:
This study aimed to evaluate the physico-mechanical performance of three PVA adhesive formulations according to the Brazilian standards for plywood testing and to evaluate the results with those presented in the technical literature and specified in normative documents. The study presents the production process of the panels, the obtaining of samples and, finally, the implementation of physico-mechanical characterization tests based on plywood Brazilian standards. For the panels production it was used a gramature of 120 g / m² and applied a pressure of 15 bars and two temperature combinations and pressing time for each adhesive. The commercial adhesives used were PVA 1810, PVA 1060 and Vinyltec 239. The physical tests conducted were thickness swelling, density, moisture content and water absorption. The mechanical tests were static flexion, for the determination of elasticity modulus (MOE) and rupture modulus (MOR), and shear in the glue line. Among the three formulations studied none showed good performance in the presence of water. However, other trials in the adhesive showed better results and closer to the commercially equivalent used, in the case the urea-formaldehyde, was the PVA 1810, that can be applied in non-structural uses and in environments without the presence of moisture
Resumo:
s not degraded in the rumen but destroy ureasis. Soybean meal is one of the protein ingredients commonly used in formulations of animal feeds. In the diets of monogastric bran has high protein content provided by a greater separation of soybean hulls. For the ruminant protein value of the meal is lower with the inclusion of soybean hulls to reduce the level of protein. With the increased consumption of meal high protein, due to increases in production of pigs and poultry in recent years, increasing the availability of soybean hulls on the market, this is because soybean hulls is little understood in the feeding of monogastric . In this context, the main objective of this study was to determine the times and temperatures needed to ensure the effective inactivation of ureasis present in the bran and soybean hulls. According to the assessments, to make the determination of temperatures and times required for the inactivation of ureasis present in the bran and soybean hulls are 170 º C and 25 minutes for soybean meal and 140 ° C 10 minutes for soybean hulls, respectively
Resumo:
Pós-graduação em Ciência e Tecnologia Animal - FEIS
Resumo:
This paper reports on the effect of the substitution of Fe3+ for Cr3+ ions in the spinel lattice of the powders was investigated. Nickel ferrite powders with a NiFe2-xCrxO4 nominal composition (x = 0.0; 0.5; 1.0 and 1.5 mol of the chromium) were synthesized by combustion reaction using urea as fuel. The powders resulting were characterized by XRD, nitrogen adsorption by BET, SEM and Mössbauer spectroscopy (57Fe Mössbauer spectra). The results show that the substitution of the Fe3+ for Cr3+ions increased the crystalline degree of the phase, reduced the superficial area and consequently increased the particle size. The Mössbauer spectra of the samples also confirm the distribution of the particles size by the magnetic properties. Analyze of the spectra Mössbauer gives an estimate of the superparamagnetic and ferromagnetic particles behavior in each sample for several chromium concentrations.
Resumo:
A new selective sensor based on molecularly imprinted polymers (MIPs) was developed for the determination of hexazinone (HXZ) in environmental samples. MIPs were synthesized using a non-covalent approach, and selection of the monomers employed in the polymerization reaction was carried out by molecular modeling. Three functional monomers with high (2-vinylpyridine (MP17)) and intermediate (methacrylic acid (MP12) and acrylamide (MP5)) energies of binding to the template (HXZ) were selected for preparation of the MIPs, in order to conduct comparative studies and validate the theoretical data. For sensor construction, carbon pastes were modified with each MIP or NIP (non-imprinted polymer), and HXZ determination was performed using differential pulse adsorptive cathodic stripping voltammetry (DPAdCSV). All parameters affecting the sensor response were optimized. In HCl at pH 2.5, the sensor prepared with MP17 (5% w/w in the paste) showed a dynamic linear range between 1.9 × 10−11 and 1.1 × 10−10 mol L−1, and a detection limit of 2.6 × 10−12 mol L−1, under the following conditions: accumulation time of 200 s at a potential of −0.5V, scan rate of 50 mVs−1, pulse amplitude of 60 mV, and pulse width of 50 ms. The sensor was selective in the presence of other similar compounds, and was successfully applied to the analysis of HXZ in river water samples.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Química - IQ
Resumo:
O extraordinário desenvolvimento da produção avícola, particularmente no setor de frango de corte, tornou o Brasil um importante produtor e exportador de carne de frango. Esse fato aliado a proibição da utilização de cama de frango como ração para ruminantes pela Instrução Normativa nº15 de 17 de julho de 2001, fez com que este resíduo se tornasse um problema ecológico e de saúde pública de alta relevância, tanto pelo volume de resíduos gerado, quanto pela composição do mesmo, que pode conter diversos fármacos utilizados neste tipo de manejo, além de uréia, que após a oxidação natural no ambiente, resulta em nitrato que tem alto poder de contaminação de mananciais hídricos, principalmente subterrâneos. Dentre as substâncias que podem estar presentes na cama de frango, estão os antimicrobianos, utilizados como promotores de crescimento das aves. No Brasil, são pouquíssimos os trabalhos dedicados a investigar a ocorrência e o impacto ambiental de antimicrobianos. Desta maneira, este trabalho teve como objetivo otimizar e validar método para análise de três fluoroquinolonas (ciprofloxacina, norfloxacina e enrofloxacina) em cama de frango. O método estudado baseou-se em trabalhos da literatura em que moléculas similares foram analisadas em diversas matrizes, compreendendo a extração em ultrassom com acetonitrila acidificada com ácido acético (3% v/v) e análise por CLAE-FLU, modo isocrático com a fase móvel composta por 0,02 M H3PO4:ACN (83:17, v/v). Foram avaliados os parâmetros cromatográficos quanto à resolução, eficiência, linearidade e limites de detecção e quantif-1 para os três analitos. O tempo de análise do método cromatográfico otimizado é de 7,5 minutos. Avaliou-se também o efeito de matriz que foi significativo para norfloxacina e ciprofloxacina, correspondendo a 16 e 20%, respectivamente. Para a enrofloxacina a amostra...
Resumo:
Pós-graduação em Agronomia - FEIS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Nitrogen, along with K, is the most limiting nutrient for sunflower productivity. The objective of this research work was to determine the best level of nitrogen in a fertilization formula for the cultivation of sunflower of the ‘HELIO – 251’ cultivar. The fertilization procedure was that recommended for the state of São Paulo for sunflower crop, except that, in each one of the treatments, N doses were of 50, 70, 90, 110, and 130 kg ha-1 . These treatments were distributed in the field according to a randomized complete block design with 4 replications. The N dose which resulted in the highest grain yield, highest oil content, and plant dry matter was of 100 kg ha-1 . Leaf N content and 1,000 grains weight increased with N doses.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)