Possible suppression of exogenous beta-1,3-glucanase gene gluc78 on rice transformation and growth

Three genes encoding for fungal cell wall degrading enzymes (CWDE), ech42, nag7O and gluc78 from the biocontrol fungus Trichoderma atroviride were transformed into rice mediated by Agrobacterium tumefaciens singly and in all possible combinations. A total of more than 1800 independently regenerated plantlets in seven different populations (for each of the three genes and each of the four gene combinations) were obtained. Our data indicated that gluc78 gene had negative effects on transformation frequency and plant growth. Some regenerated plants with gluc78 gene were stunted; spontaneously produced brown specks; could not tassel. The combination with either one of the two other genes (ech42, nag70) present in the same T-DNA region reduced the negative effect of gluc78 on plant growth. These results indicated that expression of several genes in one T-DNA region interfered with each other and expression of exogenous gene in recipient plant was a complex behavior. (c) 2007 Published by Elsevier Ireland Ltd.

基于超冗余度机械臂动力学的时间最优轨迹规划

基于超冗余度机械臂的动力学方程 ,提出了一种超冗余度机械臂同时受速度和力矩约束的时间最优轨迹规划方法 .它首先采用 B样条曲线拟合无碰撞离散路径 ,得到由伪位移参数 s表示的超冗余度机械臂连续、光滑运动路径 ,然后对动力学方程和约束方程进行数学变换 ,得到由 s表示的动力学方程和约束方程 ,最后以 s和伪速度 s· 分别作为动态规划的阶段变量和状态变量 ,对超冗余度机械臂进行时间最优轨迹规划 .仿真结果表明 ,所给出的时间最优轨迹规划算法是正确的 ,所采取的解决方法是可行的

黄骅坳陷高尘头地区储层非均质性及成藏研究

Gaochentou region is located in the southwest direction of Gaochentou village in Huanghua city of Hebei province. In regionally structural position, It lies in Qikou sag In the middle part of Huanghua depression, which belongs to the east part of the south Dagang structure zone in the middle part of Huanghua depression. Its' very beneficial at regional structure in Gaochentou , and It becomes the advantage area for oil and gas gathered and preserved, Sandstone reservoir of Dongying Formation is main bearing bed .Dongying Formation in Gaochentou region of Huanghua depression is consisted of set of mudstone and sandstone interbeds by deposited delta fades . Dongying Formation can be divided into 3 members from above to below: the first member of Dongying Formation (FMDF), the second member of Dongying Formation (SMDF), and third member of Dongying Formation (TMDF). The lithology of the upper part of FMDF was consisted of mostly middle-grained and fine-grained sandstone, and it is small for the oil-bearing area of the sand bodies .The lithology of the lower part is coarse-grained sandstone bodies which are well connected between sandstone bodies of wells, and the lower part was main bed of oil production in Dongying Formation; SMDF and TMDF are consisted of larger scale set of mudstone, in which the sandbodies are lenticular and pinch out quickly, and the lithology was mostly fine sandstone and silt stone, in which there are little oil and gas .Because the reservoirs in this area are largely influenced by the factors such as lithology, fault and others, and the reservoirs have the strong,heterogeneity , there exists the problem of oil-down and water-up for vertical distribution of oil and gas bearing. It is not very clearly for the three dimension distribution of sandstone , and the geology researchs is not enough. So, it can't satisfy the need of further development and production for Gaochentou oilfield.Having the key problem of oil-down and water-up and the mechanism of the reservoir for Gaochentou area, There are as follow study works, the first, is study of the high-resolution correlation of sequence stratigraphy and sedimentary microfacies. Dongying Formation was divided into three parasequence sets and each parasequence set was divided into different amount of parasequences. FMDF, as the main oil and gas producing bed, can be divided into seven parasequences. Oil and gas are discovered in six parasequences except the seventh. On the basis of study of sedimentary microfacies, the sediments of Dongying Formation are considered deposited mainly in delta front subfacies. The microfacies types of Dongying Formation are sub-water distirbutary channel, sub-water natural bank, inter distributary channel bay, distributary channel mouth dam, and delta front mat sand.Seismic facies analysis and logging-constrained inversion technique were applied by Author for transverse prediction of sandstone reservoir. Having 4 modes of interwell single sandbodies correlation technique, Author have described distribution characteristics of sandbodies, and established geological reservoir model of Gaochentou reservoir.Author presented that the reservoirs characteristic have very strong heterogeneity ,and In the section of sandstone interlayed with mudstone,the folium sandstone interlayed with each other, and the wedge shaped sandbodies pinched out in the mudstone. So the pinch-out up sandstone trap and lenticular sandstone trap are easily formed. They are most small scale overlying pinches out in the place of slope. This article applies the concept of deep basin oil to resolve reasonably the problem of which the oil is below the water in Gaochentou area. Combined with the study of sedimentary facies, reservoir and other aspects, the mechanism and patterns of deep basin oil are studied on the basis of characteristics in Gaochentou area.On the basis of the above study, the mechanism of the oil and gas' migration and accumulation in isotropic sandstone and heterogeneous sandstone are thoroughly analyzed through experiments on physical modeling. Experiments on physical modeling show that the discrepancy between sand layers with different permeability and thickness has important influence on the direction, path, and injection layer of oil's migration. At the beginning of the injection of oil and gas in high permeability sand layer, the pressure is low, the migration resistance is small, and the oil and gas are more easily displacing the water in sand. So it can act as good transformation layer or reservoir. But at the beginning of the injection of oil and gas in sand layer with low permeability, the pressure is high, the migration resistance is big, and the oil and gas are more difficultly displacing the water in sand. So it can only act as bad or worse transformation layer or reservoir. Even if it cannot act as transformation layer or reservoir, it can act as water layer or dry layer. The discrepancy between sand layers on permeability and thickness can make discrepancy in injection of oil and gas between different layers. Consequently it leads to small amount of oil and gas injection in sand layers with low permeability. Ultimately it affects the oil's accumulation and distribution in different sand layers.At Last, combining analysis of the structure and pool forming condition, The thesis has established models of reservoir formation to predict the advantage distribution of oil and gas bearing , and put forward the prospective target It is not only of theoretical signification for explosion and importance, but also has realistic value in guiding the progressive petroleum exploration and exploitation.

Phase transformation in the surface region of zirconia detected by UV Raman spectroscopy

The phase transformation of zirconia from tetragonal to monoclinic is characterized by UV Raman spectroscopy, visible Raman spectroscopy, and XRD. Electronic absorption Of ZrO2 in the UV region makes UV Raman spectroscopy more sensitive at the surface region than XRD or visible Raman spectroscopy. Zirconia changes from the tetragonal phase to the monoclinic phase with calcination temperatures elevated and monoclinic phase is always detected first by UV Raman spectroscopy for the samples calcined at lower temperatures than that by XRD and visible Raman spectroscopy. When the phase of zirconia changes from tetragonal to monoclinic, the slight changes of the phase at very beginning can be detected by UV Raman spectroscopy. UV Raman spectra clearly indicate that the phase transition takes place initially at the surface regions. It is found that the phase change from tetragonal to monoclinic is significantly retarded when amorphous Zr(OH)(4) was agglomerated to bigger particles and the particle agglomeration of amorphous zirconium hydroxide is beneficial to the stabilization of t-ZrO2 phase.

An Accountable Source-To-Source Transformation System

Though one is led to believe that program transformation systems which perform source-to-source transformations enable the user to understand and appreciate the resulting source program, this is not always the case. Transformations are capable of behaving and/or interacting in unexpected ways. The user who is interested in understanding the whats, whys, wheres, and hows of the transformation process is left without tools for discovering them. I provide an initial step towards the solution of this problem in the form of an accountable source-to-source transformation system. It carefully records the information necessary to answer such questions, and provides mechanisms for the retrieval of this information. It is observed that though this accountable system allows the user access to relevant facts from which he may draw conclusions, further study is necessary to make the system capable of analyzing these facts itself.

Reaction path for oxidation of ethylene to acetic acid over Pd/WO3-ZrO2 in the presence of water

Pd-supported on WO3-ZrO2 (W/Zr atomic ratio=0.2) calcined at 1073 K was found to be highly active and selective for gas-phase oxidation of ethylene to acetic acid in the presence of water at 423 K and 0.6 MPa. Contact time dependence demonstrated that acetic acid is formed via acetaldehyde formed by a Wacker-type reaction, not through ethanol by hydration of ethylene.

Capillary array electrophoresis for the research of asymmetric transformation reaction of L-proline to D-proline

One asymmetric transformation reaction Of L-proline (L-Pro) to D-proline was studied by a home-made capillary array electrophoresis (CAE) for the first time. The aldehyde catalysts and the organic acid solvents for the asymmetric transformation reaction were rapidly screened and the enantiomeric excess values of the asymmetric product Of L-Pro were directly obtained from the electrophoretogram of CAE.

A framework for the transformation of the creative industries in a digital age.

The creative industries sector faces a constantly changing context characterised by the speed of the development and deployment of digital information systems and Information Communications Technologies (ICT) on a global scale. This continuous digital disruption has had significant impact on the whole value chain of the sector: creation and production; discovery and distribution; and consumption of cultural goods and services. As a result, creative enterprises must evolve business and operational models and practices to be sustainable. Enterprises of all scales, type, and operational model are affected, and all sectors face ongoing digital disruption. Management consultancy practitioners and business strategy academics have called for new strategy development frameworks and toolkits, fit for a continuously changing world. This thesis investigates a novel approach to organisational change appropriate to the digital age, in the context of the creative sector in Scotland. A set of concepts, methods, tools, and processes to generate theoretical learning and practical knowing was created to support enterprises to digitally adapt through undertaking journeys of change and organisational development. The framework is called The AmbITion Approach. It was developed by blending participatory action research (PAR) methods and modern management consultancy, design, and creative practices. Empirical work also introduced to the framework Coghlan and Rashford’s change categories. These enabled the definition and description of the extent to which organisations developed: whether they experienced first order (change), second order (adaptation) or third order (transformation) change. Digital research tools for inquiry were tested by a pilot study, and then embedded in a longitudinal study over two years of twentyone participant organisations from Scotland’s creative sector. The author applied and investigated the novel approach in a national digital development programme for Scotland’s creative industries. The programme was designed and delivered by the author and ran nationally between 2012-14. Detailed grounded thematic analysis of the data corpus was undertaken, along with analysis of rich media case studies produced by the organisations about their change journeys. The results of studies on participants, and validation criteria applied to the results, demonstrated that the framework triggers second (adaptation) and third order change (transformation) in creative industry enterprises. The AmbITion Approach framework is suitable for the continuing landscape of digital disruption within the creative sector. The thesis contributes to practice the concepts, methods, tools, and processes of The AmbITion Approach, which have been empirically tested in the field, and validated as a new framework for business transformation in a digital age. The thesis contributes to knowledge a theoretical and conceptual framework with a specific set of constructs and criteria that define first, second, and third order change in creative enterprises, and a robust research and action framework for the analysis of the quality, validity and change achieved by action research based development programmes. The thesis additionally contributes to the practice of research, adding to our understanding of the value of PAR and design thinking approaches and creative practices as methods for change.

Poly-transformation

King, R. D. and Ouali, M. (2004) Poly-transformation. In proceedings of 5th International Conference on Intelligent Data Engineering and Automated Learning (IDEAL 2004). Springer LNCS 3177 p99-107