955 resultados para teor de óleo


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este trabalho teve por objetivo estudar a variação de vazão em tubogotejadores NaanPC laranja e NaanPC azul em função de precipitados químicos, ao longo do tempo de funcionamento, quando submetidos a uma água rica em ferro, avaliando-se especificamente o coeficiente de uniformidade de Christiansen (CUC) e o coeficiente de uniformidade de distribuição (CUD). O experimento foi desenvolvido em uma bancada de ensaios para tubogotejadores no Laboratório de Ensaio de Equipamentos para Irrigação do Departamento de Engenharia Rural da Faculdade de Ciências Agronômicas - UNESP, localizado no município de Botucatu – SP. O experimento foi montado em esquema fatorial 2x2x7, sendo duas doses de Fe, dois modelos de gotejadores e sete tempos de funcionamento, com três repetições, totalizando 84 parcelas experimentais. Efetuou-se a análise de variância pelo teste F. As médias das vazões dos gotejadores foram comparadas pelo teste de T de Student a 5% de probabilidade. Os resultados obtidos não apontaram diferença significativa nas diferentes doses de ferro. Entretanto, os resultados apontaram diferença significativa na interação gotejador x tempo e coeficiente de uniformidade de Christiansen (CUC).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to determine the ether extract content of peanut and canola seeds, with extraction in Soxhlet apparatus and with three types of processing: grinding in ball mill type; maceration in mortar and grind into micro mill after maceration in mortar. Data were analyzed in an entirely randomized design with 3 treatments and 12 replicates, submitted to variance analysis and the means were compared using Tukey test (P<0.05) with routines of the SAS statistical package. The largest percentage of ether extract was obtained in the treatment which the peanuts were subjected to a greater number of extractions (56.43%), and all treatments presented different results(P <0.05). In canola grains, it was observed that the extraction with the method of grinding in ball mill and the method of sequential extraction (macerate + ground in micro mill) were statistically similar (43.52 and 42.35% respectively), and these methods were more efficient (P <0.05) to extract the ether extract than the treatment in which the grains were only macerated. For peanut grains it was concluded that the most efficient method was the sequential one and to the canola grain, it can be used only a grinding mill as samples processing witch will be submitted to ether extract extraction.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The nitrogen fertilization is an important practice to reach high productivity, however, nitrogen high level can cause lodging and make the plants more sensitive to disease. Numerous studies has demonstrate that a lot of grasses accumulate silicon at its tissues, and the biggest part of this element is deposited on the leaf, that would work like a mechanical barrier to diseases come in. However, high levels of nitrogen can reduce the silica deposition at the plants. The objective of this study was to evaluate silicon and nitrogen content in shoot and silica deposition in upland rice leaf as a result of Si and N levels. The experimental design used was completely randomized in factorial schema 3 x 2 with five replications. The treatments consisted from levels of N (5, 75 and 150 mg dm-3 of soil) in urea form and two levels of SiO2 (0 e 400 mg dm-3) in calcium silicate form (Wollastonita). The increased of urea fertilization reduced the silicon content of rice plants and the silica deposition at the external cells wall the epidermal rice leafs.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Nest digging spends a lot of energy existing a question about how much energy is required to dig the tunnel and initial chamber. It was hypothesized that the lipid content is used during nest digging. This hypothesis was tested by comparing the consequences of increasing digging effort in queens that were experimentally stimulated to excavate a complete founding nest either once, twice or three times consecutively, compared to control queens that didn't dig. Weight and lipid content of queens were quantified. Results showed that, in contrast with the initial expectations, weight and lipid content were not affected by the increased digging effort in the experimentally-induced successive excavations. It was conclude that the excavation by the queens did not affect the percentages of lipids and consequently the energy content, in their bodies. Probably, energy resources for the excavation wasn't originated from lipid reserves, but from other energy sources, perhaps carbohydrates.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research aimed to test particleboard with leucena (Leucaena leucocephala) wood particles and polyurethane resin castor oil based. The response variables are: modulus of rupture (MOR), internal adhesion (AI), apparent density (dap) and wood moisture content (um). The experiments were developed based on the methodological procedures of the ABNT NBR 14810:2002 standard. The particleboards were manufactured by hot-pressing at 4MPa and 90°C, using timber particles with 5% of moisture content and 10% of monocomponent and bicomponent polyurethane resin. The higher moisture content was achieved when the monocomponent polyurethane resin was used. The bicomponent polyurethane resin provided a percent increase of 43.7% and 22.7% on the modulus of rupture and apparent density, respectively, when compared to the standard limit. The internal adhesion of the panels manufactured with monocomponent resin was 2.45 times higher than the standard limit. The confidence interval between means revealed that the internal adhesion and apparent density exhibited statistical equivalence. A good correlation between the internal adhesion and apparent density was found, for this reason it was possible to estimate the internal adhesion of the panels based on the apparent density data.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)