Examining the roles of core and local temperature on forearm skin blood flow

The interaction between local and reflexive control of skin blood flow (SkBF) is unclear. This thesis isolated the roles of rectal (Tre) and local (Tloc) temperature on forearm SkBF regulation at normal and elevated body temperatures, and to investigate the interaction between local and reflexive SkBF control. While either normothermic (Tre ~37.0°C) or hyperthermic (∆Tre +1.1°C), SkBF was assessed on the dorsal aspect of each forearm in 10 participants while Tloc was manipulated in an A-B-A-B fashion between neutral (33.0°C) and hot (38.5°C). Finally, local heating to 44°C was performed to elicit maximal SkBF. Data are presented as a percentage of maximal cutaneous vascular conductance (CVC), calculated as laser-Doppler flux divided by mean arterial pressure. Tloc manipulations performed during normothermia had significantly greater effects on CVC than during hyperthermia. The decreased modification to SkBF from the Tloc changes during hyperthermia suggests that strong reflexive vasodilation attenuates local SkBF control mechanisms.

Firms Performance and CEO Compensation in Canada.

Rapport de recherche

Understanding Economic Cycle Effects on Top Executive Compensation: An Analysis Applied to American NYSE Listed Companies.

Rapport de recherche présenté à la Faculté des arts et des sciences en vue de l'obtention du grade de Maîtrise en sciences économiques.

Effets des changements climatiques sur la santé et la sécurité des travailleurs au Québec

Les impacts des changements climatiques sur la population sont nombreux et ont été relativement bien documentés, ce qui n’est pas le cas de ces impacts sur la santé et la sécurité des travailleurs. L’objectif de cette thèse est de documenter les effets négatifs des changements climatiques sur la santé et la sécurité des travailleurs dans une région d’un pays industrialisé à climat tempéré, comme le Québec. Pour y arriver, deux approches ont été utilisées : a) les dangers et les effets sanitaires ont été identifiés par une revue de la littérature validée par des experts nationaux et internationaux, et des priorités de recherche ont été établies à l’aide d’une méthode de consultation itérative, b) des modèles statistiques, utiles à l’estimation des impacts sanitaires des changements climatiques, ont été développés pour apprécier les associations entre la survenue de lésions professionnelles et l’exposition des travailleurs aux chaleurs estivales et à l’ozone troposphérique, deux problématiques préoccupantes pour le Québec. Le bilan des connaissances a mis en évidence cinq catégories de dangers pouvant affecter directement ou indirectement la santé et la sécurité des travailleurs au Québec (vagues de chaleur, polluants de l’air, rayonnements ultraviolets, événements météorologiques extrêmes, maladies vectorielles transmissibles et zoonoses) et cinq conditions pouvant entraîner des modifications dans l’environnement de travail et pouvant ultimement affecter négativement la santé et la sécurité des travailleurs (changements dans les méthodes agricoles et d’élevage, altérations dans l’industrie de la pêche, perturbations de l’écosystème forestier, dégradation de l’environnement bâti et émergence de nouvelles industries vertes). Quant aux modélisations, elles suggèrent que les indemnisations quotidiennes pour des maladies liées à la chaleur et pour des accidents de travail augmentent avec les températures estivales, et que ces associations varient selon l’âge des travailleurs, le secteur industriel et la catégorie professionnelle (manuelle vs autre). Des associations positives statistiquement non significatives entre les indemnisations pour des atteintes respiratoires aiguës et les concentrations d’ozone troposphérique ont aussi été observées. Dans l’ensemble, cette thèse a permis de dégager douze pistes de recherche prioritaires pour le Québec se rapportant à l’acquisition de connaissances, à la surveillance épidémiologique et au développement de méthodes d’adaptation. Selon les résultats de cette recherche, les intervenants en santé au travail et les décideurs devraient déployer des efforts pour protéger la santé et la sécurité des travailleurs et mettre en place des actions préventives en vue des changements climatiques.

Effect of Substrate Temperature on the Structural and Luminescent Characteristics of RF-Magnetron-Sputtered ZnGa2O4:Dy3+ Thin Films

ZnGa2O4:Dy3+ phosphor thin films were deposited on quartz substrates by radio frequency rf magnetron sputtering and the effect of substrate temperature on its structural and luminescent properties was investigated. Polycrystalline film could be deposited even at room temperature. The crystalline behavior, Zn/Ga ratio, and surface morphology of the films were found to be highly sensitive to substrate temperature. Under UV illumination, the as-deposited films at and above 300°C gave white luminescence even without any postdeposition treatments. The photoluminescent PL emission can be attributed to the combined effect of multicolor emissions from the single luminescence center Dy3+ via host-sensitization. Maximum PL emission intensity was observed for the film deposited at 600°C, and the CIE chromaticity coordinates of the emission were determined to be x,y = 0.34, 0.31 .

Effect of curing temperature , fibre loading and bonding agent on the equilibrium swelling of isora-natural rubbercomposites

Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions.

A Novel Accelerator Combination for the Low Temperature Curing of Silica-Filled NBR Compounds

Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the laboratory. The effect of these xanthates in combination with zinc diethyldithiocarbamate (ZDC) on the vulcanization of silica-filled NBR compounds has been studied at different temperatures. The cure times of these compounds were compared with that of NBR compounds containing tetramethylthiuram disulphide/dibenzthiazyl disulphide. The rubber compounds with the xanthates and ZDC were cured at various temperatures from 60 to 150°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation at break, compression set, abrasion resistance, flex resistance, heat buildup, etc. were evaluated. The properties showed that zinc salt of xanthate/ZDC combination has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.

Low Temperature Curing of NBR for Property Improvement

Zinc salts of ethyl, isopropyl, and butyl xanthates are prepared in the laboratory, and the effect of these xanthates with zinc diethyl dithiocarbamate (ZDC) on the vulcanization of HAF-filled nitrile butadiene rubber (NBR) compounds has been studied at different temperatures. The cure times of these compounds have been compared with that of NBR compounds containing TMTD/MBTS. The rubber compounds with the three xanthate accelerators and ZDC are cured at various temperatures from 60 to 150°C. The sheets are molded and properties such as tensile strength, tear strength, cross-link density, elongation at break, compression set, abrasion resistance, flex resistance, etc. have been evaluated. The properties show that zinc salt of the xanthate/ZDC accelerator system has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds.

Development of Polybutadiene (BR)-Polyethylene (LDPE) Blend Based Microcellular Soles for Low-Temperature Applications

Microcellular (MC) soles based on polybutadiene (BR) and low-density polyethylene (LDPE) blends for low-temperature applications were developed. A part of BR in BR-LDPE blend was replaced by natural rubber (NR) for property improvement. The BR-NR-LDPE blend-based MC sole shows good technical properties. Sulphur curing and DCP curing were tried in BR-LDPE and NR-BR-LDPE blends. Study shows that sulphur-cured MC sheets possess better technical properties than DCPcured MC sheets. 90/10 BR-LDPE and 60/30/10 BR-NR-LDPE blend combinations are found to be suitable for low-temperature applications.

Xanthate Accelerators for Low Temperature Curing of Natural Rubber

ABSTRACT: Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the laboratory. They were purified by reprecipitation and were characterized by IR, NMR, and thermogravimetric analysis techniques. The melting points were also determined. The rubber compounds with different xanthate accelerators were cured at temperatures from 30 to 150°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation at break, and modulus at 300% elongation were evaluated. The properties showed that all three xanthate accelerators are effective for room temperature curing.