Camptosemin, a tetrameric lectin of Camptosema ellipticum: structural and functional analysis

Lectins have been classified into a structurally diverse group of proteins that bind carbohydrates and glycoconjugates with high specificity. They are extremely useful molecules in the characterization of saccharides, as drug delivery mediators, and even as cellular surface makers. In this study, we present camptosemin, a new lectin from Camptosema ellipticum. It was characterized as an N-acetyl-d-galactosamine-binding homo-tetrameric lectin, with a molecular weight around 26 kDa/monomers. The monomers were stable over a wide range of pH values and exhibited pH-dependent oligomerization. Camptosemin promoted adhesion of breast cancer cells and hemagglutination, and both activities were inhibited by its binding of sugar. The stability and unfolding/folding behavior of this lectin was characterized using fluorescence and far-UV circular dichroism spectroscopies. The results indicate that chemical unfolding of camptosemin proceeds as a two-state monomer-tetramer process. In addition, small-angle X-ray scattering shows that camptosemin behaves as a soluble and stable homo-tetramer molecule in solution.

Is the unfolding of the group discussion off-pattern? Improving coordination support in educational forums using mobile devices

A forum is a valuable tool to foster reflection in an in-depth discussion; however, it forces the course mediator to continually pay close attention in order to coordinate learners` activities. Moreover, monitoring a forum is time consuming given that it is impossible to know in advance when new messages are going to be posted. Additionally, a forum may be inactive for a long period and suddenly receive a burst of messages forcing forum mediators to frequently log on in order to know how the discussion is unfolding to intervene whenever it is necessary. Mediators also need to deal with a large amount of messages to identify off-pattern situations. This work presents a piece of action research that investigates how to improve coordination support in a forum using mobile devices for mitigating mediator`s difficulties in following the status of a forum. Based on summarized information extracted from message meta-data, mediators consult visual information summaries on PDAs and receive textual notifications in their mobile phone. This investigation revealed that mediators used the mobile-based coordination support to keep informed on what is taking place within the forum without the need to log on their desktop computer. (C) 2009 Elsevier Ltd. All rights reserved.

THE FUNDAMENTAL GROUP OF THE SPACE OF MAPS FROM A SURFACE INTO THE PROJECTIVE PLANE

In this work we compute the fundamental group of each connected component of the function space of maps from it closed surface into the projective space

New insights on surface-enhanced Raman scattering based on controlled aggregation and spectroscopic studies, DFT calculations and symmetry analysis for 3,6-bi-2-pyridyl-1,2,4,5-tetrazine adsorbed onto citrate-stabilized gold nanoparticles

Asystematic study on the surface-enhanced Raman scattering (SERS) for 3,6-bi-2-pyridyl-1,2,4,5-tetrazine (bptz) adsorbed onto citrate-modified gold nanoparticles (cit-AuNps) was carried out based on electronic and vibrational spectroscopy and density functional methods. The citrate/bptz exchange was carefully controlled by the stepwise addition of bptz to the cit-AuNps, inducing flocculation and leading to the rise of a characteristic plasmon coupling band in the visible region. Such stepwise procedure led to a uniform decrease of the citrate SERS signals and to the rise of characteristic peaks of bptz, consistent with surface binding via the N heterocyclic atoms. In contrast, single addition of a large amount of bptz promoted complete aggregation of the nanoparticles, leading to a strong enhancement of the SERS signals. In this case, from the distinct Raman profiles involved, the formation of a new SERS environment became apparent, conjugating the influence of the local hot spots and charge-transfer (CT) effects. The most strongly enhanced vibrations belong to a(1) and b(2) representations, and were interpreted in terms of the electromagnetic and the CT mechanisms: the latter involving significant contribution of vibronic coupling in the system. Copyright (C) 2010 John Wiley & Sons, Ltd.

Effect of adding CaO to ZrO(2) support on nickel catalyst activity in dry reforming of methane

Nickel catalysts with a load of 5 wt% Ni, supported on pure ZrO(2) and ZrO(2) stabilized with 4, 8 and 14 mol% CaO, were prepared by the polymerization method. The samples were characterized by X-ray diffraction (XRD), temperature-programmed reduction with hydrogen (TPR-H(2)), specific surface area (BET) and impedance spectroscopy (IS) and tested in the carbon dioxide reforming of methane. The XRD patterns showed the presence of the oxide precursor (NiO) and the tetragonal phase of CaO-ZrO(2) solid solutions. According to the TPR-H(2) analysis, the reduction of various NiO species was influenced by the support composition. The electrical properties of the support have a proportional effect on the catalytic activities. Catalytic tests were done at 800 degrees C for 6 h and the composition of the gaseous products and the catalytic conversion depended on the CaO-ZrO(2) solid solution composition and its influence on supported NiO species. A direct relation was found between the variation in the electrical conductivity of the support, the nickel species supported on it and the performance in the catalytic tests. (C) 2009 Elsevier B.V. All rights reserved.

Effect of the Y(2)O(3)-ZrO(2) support composition on nickel catalyst evaluated in dry reforming of methane

Nickel catalysts with a load of 5 wt.% Ni, supported on pure ZrO(2) and ZrO(2) stabilized with 4 mol%, 8 mol% and 12 mol% of Y(2)O(3), were prepared by the polymerization method. The samples were characterized by X-ray diffraction (XRD), temperature-programmed reduction with hydrogen (TPR-H(2)), specific surface area (BET) and electronic paramagnetic resonance (EPR) and tested as catalysts for carbon dioxide reforming of methane. The XRD patterns showed the presence of the oxide precursor (NiO) and the tetragonal phase of a Y(2)O(3)-ZrO(2) solid solution. According to the TPR-H(2) analysis, the reduction of various NiO species was influenced by the composition of the support. Catalytic tests were conducted at 800 degrees C for 6 h, and the composition of the gaseous products and the catalytic conversion rate depended on the composition of the Y(2)O(3)-ZrO(2) solid solution and its influence on the supported NiO species. A direct relation was observed between the variation in the support, the nickel species supported on it and the performance in the catalytic tests. (C) 2008 Elsevier B.V. All rights reserved.

Axial ligand influence on geometries, charge distributions and electronic structures of iron tetraazamacrocycle [Fe((II))TIM(X)(Y)](2+) complexes assessed by Density Functional Theory

We employed the Density Functional Theory along with small basis sets, B3LYP/LANL2DZ, for the study of FeTIM complexes with different pairs of axial ligands (CO, H(2)O, NH(3), imidazole and CH(3)CN). These calculations did not result in relevant changes of molecular quantities as bond lengths, vibrational frequencies and electronic populations supporting any significant back-donation to the carbonyl or acetonitrile axial ligands. Moreover, a back-donation mechanism to the macrocycle cannot be used to explain the observed changes in molecular properties along these complexes with CO or CH(3)CN. This work also indicates that complexes with CO show smaller binding energies and are less stable than complexes with CH(3)CN. Further, the electronic band with the largest intensity in the visible region (or close to this region) is associated to the transition from an occupied 3d orbital on iron to an empty pi* orbital located at the macrocycle. The energy of this Metal-to-Ligand Charge Transfer (MLCT) transition shows a linear relation to the total charge of the macrocycle in these complexes as given by Mulliken or Natural Population Analysis (NPA) formalisms. Finally, the macrocycle total charge seems to be influenced by the field induced by the axial ligands. (C) 2011 Elsevier Ltd. All rights reserved.

Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels

Two simulative test methods were used to study galling in sheet forming of two types of stainlesssteel sheet: austenitic (EN 1.4301) and lean duplex LDX 2101 (EN 1.4162) in different surface conditions. Thepin-on-disc test was used to analyse the galling resistance of different combinations of sheet materials and lubricants. The strip reduction test, a severe sheet forming tribology test was used to simulate the conditionsduring ironing. This investigation shows that the risk of galling is highly dependent on the surface texture of theduplex steel. Trials were also performed in an industrial tool used for high volume production of pumpcomponents, to compare forming of LDX 2101 and austenitic stainless steel with equal thickness. The forming forces, the geometry and the strains in the sheet material were compared for the same component.It was found that LDX steels can be formed to high strain levels in tools normally applied for forming ofaustenitic steels, but tool adaptations are needed to comply with the higher strength and springback of thematerial.

Exploring the influence of context in a community-based facilitation intervention focusing on neonatal health and survival in Vietnam : a qualitative study

Background In the Neonatal health – Knowledge into Practice (NeoKIP) trial in Vietnam, local stakeholder groups, supported by trained laywomen acting as facilitators, promoted knowledge translation (KT) resulting in decreased neonatal mortality. In general, as well as in the community-based NeoKIP trial, there is a need to further understand how context influences KT interventions in low- and middle-income countries (LMICs). Thus, the objective of this study was to explore the influence of context on the facilitation process in the NeoKIP intervention. Methods A secondary content analysis was performed on 16 Focus Group Discussions with facilitators and participants of the stakeholder groups, applying an inductive approach to the content on context through naïve understanding and structured analysis. Results The three main-categories of context found to influence the facilitation process in the NeoKIP intervention were: (1) Support and collaboration of local authorities and other communal stakeholders; (2) Incentives to, and motivation of, participants; and (3) Low health care coverage and utilization. In particular, the role of local authorities in a KT intervention was recognized as important. Also, while project participants expected financial incentives, non-financial benefits such as individual learning were considered to balance the lack of reimbursement in the NeoKIP intervention. Further, project participants recognized the need to acknowledge the needs of disadvantaged groups. Conclusions This study provides insight for further understanding of the influence of contextual aspects to improve effects of a KT intervention in Vietnam. We suggest that future KT interventions should apply strategies to improve local authorities’ engagement, to identify and communicate non-financial incentives, and to make disadvantaged groups a priority. Further studies to evaluate the contextual aspects in KT interventions in LMICs are also needed.

The influence of the supply chain agents on the new product development's performance: an analysis based on the multi-group moderation

Este estudo buscou verificar a influencia dos agentes da cadeia de suprimentos no desempenho do desenvolvimento de novos produtos quando os agentes são analisados em conjunto. A motivação desta pesquisa veio de estudos que alertaram para a consideração da integração da cadeia de suprimentos como um constructo multidimensional, englobando o envolvimento da manufatura, fornecedores e clientes no desenvolvimento de novos produtos; e devido à falta de informação sobre as influencias individuais destes agentes no desenvolvimento de novos produtos. Sob essas considerações, buscou-se construir um modelo analítico baseado na Teoria do Capital Social e Capacidade Absortiva, construir hipóteses a partir da revisão da literatura e conectar constructos como cooperação, envolvimento do fornecedor no desenvolvimento de novos produtos (DNP), envolvimento do cliente no DNP, envolvimento da manufatura no DNP, antecipação de novas tecnologias, melhoria contínua, desempenho operacional do DNP, desempenho de mercado do NPD e desempenho de negócio do DNP. Para testar as hipóteses foram consideradas três variáveis moderadoras, tais como turbulência ambiental (baixa, média e alta), indústria (eletrônicos, maquinários e equipamentos de transporte) e localização (América, Europa e Ásia). Para testar o modelo foram usados dados do projeto High Performance Manufacturing que contém 339 empresas das indústrias de eletrônicos, maquinários e equipamentos de transporte, localizadas em onze países. As hipóteses foram testadas por meio da Análise Fatorial Confirmatória (AFC) incluindo a moderação muti-grupo para as três variáveis moderadoras mencionadas anteriormente. Os principais resultados apontaram que as hipóteses relacionadas com cooperação foram confirmadas em ambientes de média turbulência, enquanto as hipóteses relacionadas ao desempenho no DNP foram confirmadas em ambientes de baixa turbulência ambiental e em países asiáticos. Adicionalmente, sob as mesmas condições, fornecedores, clientes e manufatura influenciam diferentemente no desempenho de novos produtos. Assim, o envolvimento de fornecedores influencia diretamente no desempenho operacional e indiretamente no desempenho de mercado e de negócio em baixos níveis de turbulência ambiental, na indústria de equipamentos de transporte em países da Americanos e Europeus. De igual forma, o envolvimento do cliente influenciou diretamente no desempenho operacional e indiretamente no desempenho de mercado e do negócio em médio nível de turbulência ambiental, na indústria de maquinários e em países Asiáticos. Fornecedores e clientes não influenciam diretamente no desempenho de mercado e do negócio e não influenciam indiretamente no desempenho operacional. O envolvimento da manufatura não influenciou nenhum tipo de desempenho do desenvolvimento de novos produtos em todos os cenários testados.

The ileum as a determinant organ of the functional liver cell mass in rats

PURPOSE: To evaluate if the ileum resection changes the functioning liver cell mass, the hepatic metabolism and the biodistribution of radiopharmaceutical in rats. METHODS: Twelve Wistar rats weighing 285g±34g were randomly divided into the ileum resection group (n = 6) and sham group rats (n = 6). After 30 days, they were anesthetized and 0.1mL of 99m-Tc-phytate(0.66MBq) was injected via femoral vein. After 30 minutes, blood samples were collected for red blood cells radioactive labeling and serum ALT, AST and gammaGT. Liver samples were used for 99m-Tc-phytatepercentage of radioactivity/gram of tissue and histopathology. Student’s t test was used with significance 0.05. RESULTS: There was a higher uptake of 99m-Tc-phytate in the liver of sham rats, compared to the ileum resection group (p<0.05). GammaGT, ALT and AST were increased in ileum resection rats compared to sham (p<0.05). The he patocytes count was significantly lower in ileum resection group than in sham (p<0.05). Liver: body mass ratio was lower in experimental animals than in sham group (p<0.05). CONCLUSION: These data support that the ileum has important role in liver function and liver mass regulation, and they have potential clinical implications regarding the pathogenesis of liver injury following lower bowel resection.

Characterization of Post-Consumer PET after Removal of the Original Surface: Influence of Raw Material

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nest Digging by Leaf-Cutting Ants: Effect of Group Size and Functional Structures.

Leaf-cutting ant workers dig underground chambers, for housing their symbiotic fungus, interconnected by a vast quantity of tunnels whose function is to permit the entrance of food (leaves), gaseous exchanges, andmovement of workers, offspring, and the queen. Digging is a task executed by a group of workers, but little is known about the group effect and group-constructed functional structures. Thus, we analyzed the structures formed by worker groups (5, 10, 20, and 40 individuals) of the leaf-cutting ant, Atta sexdens rubropilosa, for 2 days of excavation. The digging arena was the same for the 4 groups, with each group corresponding to a different density. Our results verified a pattern of tunneling by the workers, but no chamber was constructed. The group effect is well known, since the 40-worker group dug significantly more than the groups of 5, 10, and 20. These groups did not differ statistically from each other. Analysis of load/worker verified that workers of the smallest group carried the greatest load. Our paper demonstrates the group effect on the digging of nests, namely, that excavation is proportional to group size, but without emergence of a functional structure such as a chamber.

The surface electromyography analysis of the non-plegic upper limb of hemiplegic subjects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface dental enamel lead levels and antisocial behavior in Brazilian adolescents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)