Aspects of dietary carbohydrate intake are not related to risk of colorectal polyps in the Tennessee Colorectal Polyp Study

Purpose: High digestible carbohydrate intakes can induce hyperglycemia and hyperinsulinemia and collectively have been implicated in colorectal tumor development. Our aim was to explore the association between aspects of dietary carbohydrate intake and risk of colorectal adenomas and hyperplastic polyps in a large case–control study.

Methods: Colorectal polyp cases (n = 1,315 adenomas only, n = 566 hyperplastic polyps only and n = 394 both) and controls (n = 3,184) undergoing colonoscopy were recruited between 2003 and 2010 in Nashville, Tennessee, USA. Dietary intakes were estimated by a 108-item food frequency questionnaire. Unconditional logistic regression analysis was applied to determine odds ratios (OR) and corresponding 95 % confidence intervals (CI) for colorectal polyps according to dietary carbohydrate intakes, after adjustment for potential confounders.

Results: No significant associations were detected for risk of colorectal adenomas when comparing the highest versus lowest quartiles of intake for total sugars (OR 1.03; 95 % CI 0.84–1.26), starch (OR 1.01; 95 % CI 0.81–1.26), total or available carbohydrate intakes. Similar null associations were observed between dietary carbohydrate intakes and risk of hyperplastic polyps, or concurrent adenomas and hyperplastic polyps.

Conclusion: In this US population, digestible carbohydrate intakes were not associated with risk of colorectal polyps, suggesting that dietary carbohydrate does not have an etiological role in the early stages of colorectal carcinogenesis.

Fasciola hepatica:the effect of the microfilament inhibitor cytochalasin B on the ultrastructure of the adult fluke

The effect of the microfilament inhibitor cytochalasin B (10 and 100 micrograms/ml) on the ultrastructure of adult Fasciola hepatica was determined in vitro by scanning and transmission electron microscopy (SEM, TEM) using both intact flukes and tissue-slice material. SEM revealed that initial swelling of the tegument led to surface blebbing and limited areas of sloughing after 24 h treatment at 100 micrograms/ml. In the tegumental syncytium, basal accumulations of secretory bodies (especially T2s) were evident in the earlier time periods but declined with longer incubations, until few secretory bodies remained in the syncytium overall. Blebbing of the apical plasma membrane and occasional areas of breakdown and sloughing of the tegument were observed over longer periods of treatment at 100 micrograms/ml. In the tegumental cell bodies, the Golgi complexes gradually decreased in size and activity, and few secretory bodies were produced. In the later time periods, the cells assumed abnormal shapes, the cytoplasm shrinking in towards the nucleus. In the vitelline follicles, a random dispersion of shell protein globules was evident within the intermediate-type cells, rather than their being organized into distinct shell globule clusters. Disruption of this process was more severe at the higher concentration of 100 micrograms/ml and again was more evident in tissue-slice material. In the latter, after prolonged (12 h) exposure to cytochalasin B, the intermediate and mature vitelline cells were filled with loosely packed and expanded shell globule clusters, containing few shell protein globules. The mature vitelline cells continued to lay down "yolk" globules and glycogen deposits. Disruption of the network of processes from the nurse cells was evident at the higher concentration of cytochalasin. Spaces began to appear between the vitelline cells and grew larger with progressively longer incubation periods, and the cells themselves assumed abnormal shapes. A number of binucleate stem cells were observed in tissue-slice material at the longest incubation period (12 h).

The determination of optimal processing conditions for PLA and PLA/CaCO3 in twin screw extrusion using DoE and multivariate analysis

Biodegradable polymers, such as PLA (Polylactide), come from renewable resources like corn starch and if disposed of correctly, degrade and become harmless to the ecosystem making them attractive alternatives to petroleum based polymers. PLA in particular is used in a variety of applications including medical devices, food packaging and waste disposal packaging. However, the industry faces challenges in melt processing of PLA due to its poor thermal stability which is influenced by processing temperatures and shearing.
Identification and control of suitable processing conditions is extremely challenging, usually relying on trial and error, and often sensitive to batch to batch variations. Off-line assessment in a lab environment can result in high scrap rates, long lead times and lengthy and expensive process development. Scrap rates are typically in the region of 25-30% for medical grade PLA costing between €2000-€5000/kg.
Additives are used to enhance material properties such as mechanical properties and may also have a therapeutic role in the case of bioresorbable medical devices, for example the release of calcium from orthopaedic implants such as fixation screws promotes healing. Additives can also reduce the costs involved as less of the polymer resin is required.
This study investigates the scope for monitoring, modelling and optimising processing conditions for twin screw extrusion of PLA and PLA w/calcium carbonate to achieve desired material properties. A DAQ system has been constructed to gather data from a bespoke measurement die comprising melt temperature; pressure drop along the length of the die; and UV-Vis spectral data which is shown to correlate to filler dispersion. Trials were carried out under a range of processing conditions using a Design of Experiments approach and samples were tested for mechanical properties, degradation rate and the release rate of calcium. Relationships between recorded process data and material characterisation results are explored.

Identification of human neutrophil defensins (HNPs1-3) in biopsies of squamous cell carcinomas of the human tongue

It has previously been reported that the a-defensins, found in the granules of polymorphonuclear leukocytes (neutrophils/ PMNs), are cytolytic for human tumour cells in vitro. Objective: To identify and quantify the a- defensins, HNP-1, HNP-2 and HNP-3 in healthy and tumour tissue from patients with oral squamous cell carcinoma using HPLC, mass spectrometry and amino acid sequencing. Methods: All patients (n=5) were diagnosed with oral squamous cell carcinoma of the tongue.Biopsy tissue from the site of the tumour (n=5) and a non-affected region of the tongue (n=5) was snap frozen and subsequently stored at -70 ºC until analysed. Peptides were extracted from the 10 tissue biopsies using acidified ethanol. Peptide extracts were separated by reverse-phase HPLC . All tumour and control tissue samples were individually analysed under identical conditions with a flow rate of l ml/min, ambient column temperature and absorbance detection at 214 and 280 nm. Fractions (1ml) were collected automatically. HPLC fractions were analysed by MALDI-MS using a linear time-of-flight Voyager DE-mass spectrometer (PerSeptive Biosystems, UK). Using this system the detection limit was 10 fmol. Peptides with molecular masses corresponding to those reported for the a-defensins were deemed of interest and were further subject to complete structural analysis by automated Edman degradation using an Applied Biosystems 491 Procise microsequencer. Results: MALDI-MS revealed a triad of peptides of molecular masses 3442 Da, 3371 Da and 3486 Da in both healthy and tumour tissue. Full length sequence data were obtained for the three a-defensins, unequivocally identifying their presence in both tumour and healthy tissue. Analysis of the MALDI-MS and sequence data indicated that the a-defensins were overexpressed (up to 12 fold) in tumour tissue. Conclusion: This study demonstrates the feasibility of screening tumour tissue for novel peptides/proteins using HPLC and MALDI-MS.The role of a-defensins in oral squamous cell carcinoma of the tongue requires further investigation.

Biological phosphorus removal during high-rate, low-temperature, anaerobic digestion of wastewater.

We report, for the first time, extensive biologically-mediated phosphate removal from wastewater during high-rate anaerobic digestion (AD). A hybrid sludge bed/fixed-film (packed pumice stone) reactor was employed for low-temperature (12°C) anaerobic treatment of synthetic sewage wastewater. Successful phosphate removal from the wastewater (up to 78% of influent phosphate) was observed, mediated by biofilms in the reactor. Scanning electron microscopy and energy dispersive X-ray analysis revealed the accumulation of elemental phosphorus (~2%) within the sludge bed and fixed-film biofilms. 4’, 6-diamidino-2-phenylindole (DAPI) staining indicated phosphorus accumulation was biological in nature and mediated through the formation of intracellular inorganic polyphosphate (polyP) granules within these biofilms. DAPI staining further indicated that polyP accumulation was rarely associated with free cells. Efficient and consistent chemical oxygen demand (COD) removal was recorded, throughout the 732-day trial, at applied organic loading rates between 0.4-1.5 kg COD m-3 d-1 and hydraulic retention times of 8-24 hours, while phosphate removal efficiency ranged from 28-78% on average per phase. Analysis of protein hydrolysis kinetics and the methanogenic activity profiles of the biomass revealed the development, at 12˚C, of active hydrolytic and methanogenic populations. Temporal microbial changes were monitored using Illumina Miseq analysis of bacterial and archaeal 16S rRNA gene sequences. The dominant bacterial phyla present in the biomass at the conclusion of the trial were the Proteobacteria and Firmicutes and the dominant archaeal genus was Methanosaeta. Trichococcus and Flavobacterium populations, previously associated with low temperature protein degradation, developed in the reactor biomass. The presence of previously characterised polyphosphate accumulating organisms (PAOs) such as Rhodocyclus, Chromatiales, Actinobacter and Acinetobacter was recorded at low numbers. However, it is unknown as yet if these were responsible for the luxury polyP uptake observed in this system. The possibility of efficient phosphate removal and recovery from wastewater during AD would represent a major advance in the scope for widespread application of anaerobic wastewater treatment technologies.

Ultra-High-Resolution Observations of MHD Waves in Photospheric Magnetic Structures

This chapter reviews the recent observations of waves and oscillations manifesting in fine-scale magnetic structures in the solar photosphere, which are often interpreted as the "building blocks' of the magnetic Sun. The authors found, through phase relationships between the various waveforms, that small-scale magnetic bright points (MBPs) in the photosphere demonstrated signatures of specific magnetoacoustic waves, in particular the sausage and kink modes. Modern magnetohydrodynamic (MHD) simulations of the lower solar atmosphere clearly show how torsional motions can easily be induced in magnetic elements in the photosphere through the processes of vortical motions and/or buffeting by neighboring granules. The authors detected significant power associated with high-frequency horizontal motions, and suggested that these cases may be especially important in the creation of a turbulent environment that efficiently promotes Alfvén wave dissipation.

Design, production and characterisation of granular adsorbent material for arsenic removal from contaminated wastewater

The objective of this research was to design granulated iron oxide for the adsorption of heavy metals from wastewater. Polyvinyl acetate (PVAc) was chosen as a suitable binder; as it is water insoluble. Initial experiments on selection of suitable solvent of the polymer were carried out using three solvents namely; methanol, acetone and toluene. Based on the initial tests on product yield and mechanical strength, acetone was selected as the solvent for the polyvinyl acetate binder. Design of experiment was then used to investigate the influence of granulation process variables; impeller speed, binder concentration and liquid to solid ratio on the properties of the granular materials. The response variables in the study were granules mean size, stability in water and granule strength. The results showed that the combination of high impeller speed and high binder concentration favour the formation of strong and stable granules. Results also showed that leaching of the binder into the simulated was water was negligible. Trial adsorption experiments carried out using the strongest and most stable iron oxide granules produced in this work showed removal efficiency of around 70% of synthetic arsenic solutions with initial concentration of 1000 ppb.

Influence of speciation in the bioavailability of cadmium to an isopod

Devido às actividades antropogénicas várias substâncias químicas têm sido introduzidas no meio ambiente em concentrações que de outro modo não ocorreriam de forma tão elevada naturalmente. Assim, o conhecimento acerca das características de um químico, tais como, o potencial para se acumular em diferentes níveis tróficos, a sua mobilidade dentro do ecossistema, a toxicidade específica e a bioacumulação, é fundamental para compreender os seus efeitos nos ecossistemas. Esta tese investiga a influência de especiação, na biodisponibilidade do cádmio (Cd) para o isópode Porcellio dilatatus, incluindo os efeitos de especiação do metal: (i) na assimilação do Cd, (ii) no modo como o Cd se distribui internamente no organismo, e (iii) como a sobrevivência e a reprodução são afectadas em isópodes terrestres. Num primeiro ensaio laboratorial avaliou-se a importância da transferência trófica na assimilação do Cd em P. dilatatus. Para tal analisou-se a eficiência de assimilação (EA) do Cd em isópodes, adicionado superficialmente ao alimento (alface) na forma de Cd(NO3)2 e contaminando o meio de crescimento da alface. A hipótese era de que a alface contaminada biologicamente através do cultivo em meio hidropónico contaminado teria uma maior proporção de complexos com proteína ou conjugado na forma de Cd (ex. Cd cisteína). A EA de Cd foi maior entre os isópodes que foram alimentados com o sal (71%, SE = 7%), do que entre os isópodes que se alimentaram de alface contaminada biologicamente (52%, SE = 5%), demonstrando-se assim num teste laboratorial que é provável que a especiação do Cd influencie a taxa de assimilação e acumulação do Cd. Na experiência alimentar que se seguiu, estudou-se em detalhe a especiação do metal comparando as EA do Cd conjugado com cisteína (Cd(Cys)2) e na forma de Cd(NO3)2, com os quais se contaminou gelatina com alface. A utilização de Cd-cisteína, proporcionou uma forma experimental para explorar a biodisponibilidade do Cd complexado dentro do tecido biológico. Como esperado, a EA de Cd em isópodes alimentados com nitrato de Cd (64%, SE = 5%) foi maior do que no caso de isópodes alimentados com o conjugado de cisteína (20%, SE = 3%). De seguida estudou-se a distribuição subcelular das espécies de Cd assimilado através de um processo de fraccionamento. Supunha-se que as diferenças de especiação de Cd reflectiria diferentes estratégias de compartimentalização, com consequências ao nível da detoxificação, armazenamento celular e distribuição subcelular do metal. O “sequestro” na forma de metal biologicamente detoxificado (BDM = proteínas estáveis ao calor - HSP e grânulos ricos em metal - RMG) foi maior nos isópodes alimentados com Cd(NO3)2, sugerindo que são mais eficientes na detoxificação de Cd (22%) do que quando alimentados com Cd(Cys)2 (15%). Foi também demonstrado que os isópodes alimentados com Cd(Cys)2 possuíam níveis de armazenamento de Cd superior nas fracções sensíveis ao metal (MSF = organelos e proteínas desnaturadas pelo calor - HDP) consideradas fracções potencialmente vulneráveis e afectando os isópodes em termos de toxicidade. As diferentes distribuições internas que se seguiram à assimilação e detoxificação das diferentes espécies de Cd foram finalmente avaliadas em termos da sobrevivência e reprodução dos isópodes. O tratamento com Cd(Cys)2 teve maior mortalidade, provavelmente devido à maior disponibilidade de Cd ingerido com implicações ao nível dos processos fisiológicos. Os isópodes alimentados com Cd(NO3)2 armazenaram o Cd nos MRG, como estratégia de detoxificação, sendo mais eficientes a detoxificar o Cd ainda que aumentando a concentração total do metal que se tornou menos tóxico para o isópode. Desta forma, o Cd nos grânulos não estava disponível para os processos fisiológicos e deixou de ser tóxico. Isso poderia estar relacionado com a resistência e tolerância aos metais devido à capacidade dos isópodes compartimentalizarem o Cd no hepatopâncreas, que actua como um mecanismo de detoxificação e contribui para a tolerância a altos níveis de cádmio. Em termos de parâmetros reprodutivos, observou-se uma redução de gestações e duração da gestação na presença de ambas as espécies de metal, mas no caso do Cd(Cys)2 as gravidezes não se concluíram. O número de jovens produzido por fêmeas alimentadas com Cd(NO3)2 foi menor do que no controlo, mas os pesos dos juvenis foram superiores. Finalmente sugere-se assim que esta abordagem seja considerada em estudos do movimento trófico de metais nas cadeias alimentares dado que se espera que a especiação de metais implique diferentes fluxos, dentro de uma dada cadeia trófica.

Contribuição para a melhoria da qualidade nutricional do sorgo

Este trabalho teve como principal objectivo sugerir uma forma de processamento de sorgo adaptável à escala industrial que, sendo culturalmente aceite e sensível aos hábitos alimentares, aos factores sociais e às limitações económicas e tecnológicas das populações Africanas de consumo, pudesse dar origem a um produto alimentar seguro e enriquecido em termos nutricionais. Numa primeira fase, efectuou-se um estudo comparativo entre os efeitos promovidos por diferentes formas de processamento: cozimento em água, aquecimento em banho-maria, pipocagem, germinação, fermentação e altapressão. Foram ainda determinadas as condições óptimas de aplicação do processo germinativo e da tecnologia de alta-pressão. Verificou-se que a fermentação, a germinação e a alta-pressão permitem uma melhoria significativa da digestibilidade proteica da farinha de sorgo. A pipocagem conduziu a uma redução da extractibilidade das proteínas não promovendo, contudo, alterações na sua digestibilidade. Comparativamente ao cozimento em água, que promove uma diminuição acentuada na digestibilidade proteica, o cozimento em banho-maria promove uma diminuição ténue e significativamente inferior. Deste estudo comparativo, foi possível concluir que a extractibilidade das proteínas não está correlacionada com a sua digestibilidade e que a água exerce um papel fundamental na diminuição da digestibilidade proteica com o aquecimento. Numa segunda fase, pretendeu-se desenvolver um processo fermentativo que conduzisse a um produto de sorgo com características nutricionais incrementadas. Para tal, foram testadas daiferentes espécies de bactérias lácticas isoladas e conjugadas entre si. Foi ainda testada a adição de malte de sorgo previamente à fermentação e a adição de leveduras ao inóculo. Com este estudo, foi possível concluir que a fermentação do sorgo com um inóculo constituído por culturas puras de Lactobacillus brevis, Lactobacillus fermentum e Streptococcus thermophilus permite a obtenção de uma preparação alimentar com características nutricionais melhoradas no que respeita ao balanço em aminoácidos essenciais, à digestibilidade da proteína e do amido e à viscosidade do produto final.

Physiology and metabolic profile of Moringa olifera and Eucalyptus globulus plants subjected to climate changes

As alterações climáticas emergentes têm um grande impacto no crescimento e desenvolvimento de espécies florestais, nomeadamente em espécies de valor industrial e medicinal, como é o caso do eucalipto (Eucalyptus globulus) e da moringa (Moringa oleifera). Assim, é urgente conhecer as respostas fisiológicas e entender as variações que ocorrem nos perfis metabólicos de espécies vegetais. Neste trabalho, plantas jovens de Eucalyptus globulus foram expostas a radiação UVB (12kJ/m2) e foram avaliadas as respostas fisiológicas e o perfil metabólico, um e onze dias após a aplicação da radiação. A dose de UVB usada não afetou as reações fotoquímicas nem as trocas gasosas, contudo ao nível do metabolismo do carbono (AST e amido) e do conteúdo de pigmentos verificaram-se pequenas alterações (AST e pigmentos). Através da análise do perfil metabólico de E. globulus foram encontrados compostos voláteis e semi-voláteis pertencentes às famílias dos terpenos, sesquiterpenos e aldeídos. Em geral, os sesquiterpenos e os álcoois monoterpénicos apresentaram uma tendência para manter e, em alguns casos, diminuir com o stress, enquanto que o grupos dos aldeídos aumentou e os monoterpenos apresentaram um comportamento mais heterogéneo. O E. globulus mostrou ser uma espécie tolerante à aplicação da dose de UVB usada neste trabalho. Por outro lado, plantas jovens de M. oleifera foram expostas a défice hídrico (DH). Um grupo de plantas foi recolhido um dia após o final da exposição e o outro grupo após onze dias do final da exposição. Foi avaliado o perfil metabólico desta espécie através de GC/MS. Os dados cromatográficos indicaram que em condições de stress (DH(1) e DH(11)), as quantidades de compostos associados a vias primárias e secundárias de defesa (como os alcanos, álcoois, ácidos carboxílicos, esteróis, aminoácidos e açucares) sofreram algumas alterações. As plantas analisadas 11 dias após a remoção do stress mostraram maiores variações do perfil de metabolitos. No entanto, tanto um como onze dias após a remoção do stress, as plantas apresentaram a formação de novos rebentos. Apesar do perfil de metabolitos ter sofrido algumas alterações, por não se registarem casos de morte, conclui-se que as plantas de moringa mostraram ser tolerantes aos tratamentos aplicados.

Early nutritional programming in fish: tailoring the metabolic use of dietary carbohydrates

Tese de doutoramento, Ciências da Vida, do Mar, da Terra e do Ambiente (Nutrição), Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Development and characterization of novel vehicles for topical drug delivery

Tese de doutoramento, Farmácia (Tecnologia Farmacêutica), Universidade de Lisboa, Faculdade de Farmácia, 2016

Adsorption behavior of α-cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of α-cypermethrin [R)-α-cyano-3-phenoxybenzyl(1S)-cis- 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-α-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2- dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze α-cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time—24 hours for both cork (1–2 mm and 3–4 mm) and GAC. For the studied α-cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1–2 mm have the maximum amount of adsorbed α-cypermethrin (qm) (303 μg/g); followed by GAC (186 μg/g) and cork 3-4 mm (136 μg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the α-cypermethrin adsorption phenomena on GAC, while α-cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing α-cypermethrin from water.

Modelling of a wastewater treatment plant using GPS-X

Dissertation to obtain the degree of Master in Chemical and Biochemical Engineering

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.