An algorithm for FHR estimation from foetal phonocardiographic signals

The long-term foetal surveillance is often to be recommended. Hence, the fully non-invasive acoustic recording, through maternal abdomen, represents a valuable alternative to the ultrasonic cardiotocography. Unfortunately, the recorded heart sound signal is heavily loaded by noise, thus the determination of the foetal heart rate raises serious signal processing issues. In this paper, we present a new algorithm for foetal heart rate estimation from foetal phonocardiographic recordings. A filtering is employed as a first step of the algorithm to reduce the background noise. A block for first heart sounds enhancing is then used to further reduce other components of foetal heart sound signals. A complex logic block, guided by a number of rules concerning foetal heart beat regularity, is proposed as a successive block, for the detection of most probable first heart sounds from several candidates. A final block is used for exact first heart sound timing and in turn foetal heart rate estimation. Filtering and enhancing blocks are actually implemented by means of different techniques, so that different processing paths are proposed. Furthermore, a reliability index is introduced to quantify the consistency of the estimated foetal heart rate and, based on statistic parameters; [,] a software quality index is designed to indicate the most reliable analysis procedure (that is, combining the best processing path and the most accurate time mark of the first heart sound, provides the lowest estimation errors). The algorithm performances have been tested on phonocardiographic signals recorded in a local gynaecology private practice from a sample group of about 50 pregnant women. Phonocardiographic signals have been recorded simultaneously to ultrasonic cardiotocographic signals in order to compare the two foetal heart rate series (the one estimated by our algorithm and the other provided by cardiotocographic device). Our results show that the proposed algorithm, in particular some analysis procedures, provides reliable foetal heart rate signals, very close to the reference cardiotocographic recordings. © 2010 Elsevier Ltd. All rights reserved.

Educating for sustainability in language degrees:a tale of 2 case-studies

Purpose According to the 2014 joint report drafted by the Quality Assurance Agency and Higher Education Academy (QAA/HEA), universities have a key role to play in the development of sustainability literate graduates who can contribute to an environmentally responsible society. In this paper, the authors aim to assess language students’ understanding of sustainable development (SD) issues. Design/methodology/approach Study 1 surveys two cohorts of final year language students about to enter the graduate job market, and Study 2 surveys first year language students before and after the inclusion of SD content in one of their modules. The questions to the students are provided along with qualitative and quantitative results. Findings Results suggest that only 48% of language graduates are currently aware that they will need to take account of the environmental impact of their work as professional practitioners, and 52% do not consider it appropriate to learn about SD during their degree. However, results also suggest that incorporating SD early on in the language curriculum could contribute positively to the development of sustainability literate graduates. Originality/value While many language departments are aware of the importance of integrating sustainability into their curricula, and while employers are increasingly demanding sustainability literate graduates, there is little evidence that language students leave university with a real understanding of sustainability issues. This paper presents evidence of the current situation as well as a novel way to integrate sustainability into the language curriculum in order to remedy the situation.

A new paradigm in large-scale assembly-research priorities in measurement assisted assembly

This paper presents for the first time the concept of measurement assisted assembly (MAA) and outlines the research priorities of the realisation of this concept in the industry. MAA denotes a paradigm shift in assembly for high value and complex products and encompasses the development and use of novel metrology processes for the holistic integration and capability enhancement of key assembly and ancillary processes. A complete framework for MAA is detailed showing how this can facilitate a step change in assembly process capability and efficiency for large and complex products, such as airframes, where traditional assembly processes exhibit the requirement for rectification and rework, use inflexible tooling and are largely manual, resulting in cost and cycle time pressures. The concept of MAA encompasses a range of innovativemeasurement- assisted processes which enable rapid partto- part assembly, increased use of flexible automation, traceable quality assurance and control, reduced structure weight and improved levels of precision across the dimensional scales. A full scale industrial trial of MAA technologies has been carried out on an experimental aircraft wing demonstrating the viability of the approach while studies within 140 smaller companies have highlighted the need for better adoption of existing process capability and quality control standards. The identified research priorities for MAA include the development of both frameless and tooling embedded automated metrology networks. Other research priorities relate to the development of integrated dimensional variation management, thermal compensation algorithms as well as measurement planning and inspection of algorithms linking design to measurement and process planning. © Springer-Verlag London 2013.

Developing a robust self evaluation framework for active learning:the first stage of an ERASMUS+ project (QAEMarketPlace4HEI)

In ensuring the quality of learning and teaching in Higher Education, self-evaluation is an important component of the process. An example would be the approach taken within the CDIO community whereby self-evaluation against the CDIO standards is part of the quality assurance process. Eight European universities (Reykjavik University, Iceland; Turku University of Applied Sciences, Finland; Aarhus University, Denmark; Helsinki Metropolia University of Applied Sciences, Finland; Ume? University, Sweden; Telecom Bretagne, France; Aston University, United Kingdom; Queens University Belfast, United Kingdom) are engaged in an EU funded Erasmus + project that is exploring the quality assurance process associated with active learning. The development of a new self-evaluation framework that feeds into a ?Marketplace? where participating institutions can be paired up and then engage in peer evaluations and sharing around each institutions approach to and implementation of active learning. All of the partner institutions are engaged in the application of CDIO within their engineering programmes and this has provided a common starting point for the partnership to form and the project to be developed. Although the initial focus will be CDIO, the longer term aim is that the approach could be of value beyond CDIO and within other disciplines. The focus of this paper is the process by which the self-evaluation framework is being developed and the form of the draft framework. In today?s Higher Education environment, the need to comply with Quality Assurance standards is an ever present feature of programme development and review. When engaging in a project that spans several countries, the wealth of applicable standards and guidelines is significant. In working towards the development of a robust Self Evaluation Framework for this project, the project team decided to take a wide view of the available resources to ensure a full consideration of different requirements and practices. The approach to developing the framework considered: a) institutional standards and processes b) national standards and processes e.g. QAA in the UK c) documents relating to regional / global accreditation schemes e.g. ABET d) requirements / guidelines relating to particular learning and teaching frameworks e.g. CDIO. The resulting draft self-evaluation framework is to be implemented within the project team to start with to support the initial ?Marketplace? pairing process. Following this initial work, changes will be considered before a final version is made available as part of the project outputs. Particular consideration has been paid to the extent of the framework, as a key objective of the project is to ensure that the approach to quality assurance has impact but is not overly demanding in terms of time or paperwork. In other words that it is focused on action and value added to staff, students and the programmes being considered.

From Clerk and Cashier to Guest Service Agent

In their study - From Clerk and Cashier to Guest Service Agent - by Nancy J. Allin, Director of Quality Assurance and Training and Kelly Halpine, Assistant Director of Quality Assurance and Training, The Waldorf-Astoria, New York, the authors state at the outset: “The Waldorf-Astoria has taken the positions of registration clerk and cashier and combined them to provide excellent guest service and efficient systems operation. The authors tell how and why the combination works. That thesis statement defines the article, and puts it squarely in the crosshairs of the service category. Allin and Halpine use their positions at the Waldorf-Astoria in New York City to frame their observations “The allocation of staff hours has been a challenge to many front office managers who try their hardest to schedule for the norm but provide excellent, efficient service throughout the peaks,” Allin and Halpine allude. “…the decision [to combine the positions of registration clerk and cashier] was driven by a desire to improve guest service where its impact is most obvious, at the front desk. Cross-trained employees speed the check-in and check-out process by performing both functions, as the traffic at the desk dictates,” the authors say. Making such a move has resulted in positive benefits for both the guests and the hotel. “Benefits to the hotel, in addition to those brought to bear by increased guest satisfaction, include greater flexibility in weekly scheduling and in granting vacations while maintaining adequate staffing at the desk,” say Allin and Halpine . “Another expected outcome, net payroll savings, should also be realized as a consequence of the ability to schedule more efficiently.” The authors point to communication as the key to designing a successful combination such as this, with the least amount of service disruption. They bullet-point what that communication should entail. Issues of seniority, wage and salary rates, organizational charting, filing, scheduling, possible probationary periods, position titles, and physical layouts are all discussed. “It is critical that each of the management issues be addressed and resolved before any training is begun,” Allin and Halpine suggest. “Unresolved issues project confusion and lack of conviction to line employees and the result is frustration and a lack of commitment to the combination process,” they push the thought Allin and Halpine insist: “Once begun, training must be ongoing and consistent.” In the practical sense, the authors provide that authorizing overtime is helpful in accomplishing training. “Training must address the fact that employees will be faced with guest situations which are new to them, for example: an employee previously functioning as a cashier will be faced with walking guests. Specific exercises should be included to address these needs,” say the authors.

Construção de um classificador automático de severidade de bugs para sistemas open source

Software bug analysis is one of the most important activities in Software Quality. The rapid and correct implementation of the necessary repair influence both developers, who must leave the fully functioning software, and users, who need to perform their daily tasks. In this context, if there is an incorrect classification of bugs, there may be unwanted situations. One of the main factors to be assigned bugs in the act of its initial report is severity, which lives up to the urgency of correcting that problem. In this scenario, we identified in datasets with data extracted from five open source systems (Apache, Eclipse, Kernel, Mozilla and Open Office), that there is an irregular distribution of bugs with respect to existing severities, which is an early sign of misclassification. In the dataset analyzed, exists a rate of about 85% bugs being ranked with normal severity. Therefore, this classification rate can have a negative influence on software development context, where the misclassified bug can be allocated to a developer with little experience to solve it and thus the correction of the same may take longer, or even generate a incorrect implementation. Several studies in the literature have disregarded the normal bugs, working only with the portion of bugs considered severe or not severe initially. This work aimed to investigate this portion of the data, with the purpose of identifying whether the normal severity reflects the real impact and urgency, to investigate if there are bugs (initially classified as normal) that could be classified with other severity, and to assess if there are impacts for developers in this context. For this, an automatic classifier was developed, which was based on three algorithms (Näive Bayes, Max Ent and Winnow) to assess if normal severity is correct for the bugs categorized initially with this severity. The algorithms presented accuracy of about 80%, and showed that between 21% and 36% of the bugs should have been classified differently (depending on the algorithm), which represents somewhere between 70,000 and 130,000 bugs of the dataset.

Variability of the IFN-γ ELISpot assay in the context of proficiency testing and bridging studies.

Assays that assess cellular mediated immune responses performed under Good Clinical Laboratory Practice (GCLP) guidelines are required to provide specific and reproducible results. Defined validation procedures are required to establish the Standard Operating Procedure (SOP), include pass and fail criteria, as well as implement positivity criteria. However, little to no guidance is provided on how to perform longitudinal assessment of the key reagents utilized in the assay. Through the External Quality Assurance Program Oversight Laboratory (EQAPOL), an Interferon-gamma (IFN-γ) Enzyme-linked immunosorbent spot (ELISpot) assay proficiency testing program is administered. A limit of acceptable within site variability was estimated after six rounds of proficiency testing (PT). Previously, a PT send-out specific within site variability limit was calculated based on the dispersion (variance/mean) of the nine replicate wells of data. Now an overall 'dispersion limit' for the ELISpot PT program within site variability has been calculated as a dispersion of 3.3. The utility of this metric was assessed using a control sample to calculate the within (precision) and between (accuracy) experiment variability to determine if the dispersion limit could be applied to bridging studies (studies that assess lot-to-lot variations of key reagents) for comparing the accuracy of results with new lots to results with old lots. Finally, simulations were conducted to explore how this dispersion limit could provide guidance in the number of replicate wells needed for within and between experiment variability and the appropriate donor reactivity (number of antigen-specific cells) to be used for the evaluation of new reagents. Our bridging study simulations indicate using a minimum of six replicate wells of a control donor sample with reactivity of at least 150 spot forming cells per well is optimal. To determine significant lot-to-lot variations use the 3.3 dispersion limit for between and within experiment variability.

Process Monitoring and Defect Detection of Additive Manufacturing Using Inline Coherent Imaging

With applications ranging from aerospace to biomedicine, additive manufacturing (AM) has been revolutionizing the manufacturing industry. The ability of additive techniques, such as selective laser melting (SLM), to create fully functional, geometrically complex, and unique parts out of high strength materials is of great interest. Unfortunately, despite numerous advantages afforded by this technology, its widespread adoption is hindered by a lack of on-line, real time feedback control and quality assurance techniques. In this thesis, inline coherent imaging (ICI), a broadband, spatially coherent imaging technique, is used to observe the SLM process in 15 - 45 $\mu m$ 316L stainless steel. Imaging of both single and multilayer builds is performed at a rate of 200 $kHz$, with a resolution of tens of microns, and a high dynamic range rendering it impervious to blinding from the process beam. This allows imaging before, during, and after laser processing to observe changes in the morphology and stability of the melt. Galvanometer-based scanning of the imaging beam relative to the process beam during the creation of single tracks is used to gain a unique perspective of the SLM process that has been so far unobservable by other monitoring techniques. Single track processing is also used to investigate the possibility of a preliminary feedback control parameter based on the process beam power, through imaging with both coaxial and 100 $\mu m$ offset alignment with respect to the process beam. The 100 $\mu m$ offset improved imaging by increasing the number of bright A-lines (i.e. with signal greater than the 10 $dB$ noise floor) by 300\%. The overlap between adjacent tracks in a single layer is imaged to detect characteristic fault signatures. Full multilayer builds are carried out and the resultant ICI images are used to detect defects in the finished part and improve upon the initial design of the build system. Damage to the recoater blade is assessed using powder layer scans acquired during a 3D build. The ability of ICI to monitor SLM processes at such high rates with high resolution offers extraordinary potential for future advances in on-line feedback control of additive manufacturing.

An integrated psychology virtual research ethics committee

Research and professional ethics are an integral part of every Psychology degree, as this is seen as a key graduate learning outcome for students leaving to become clinicians working with clients and patients. The development of these skills is embedded in teaching, but they culminate in the final year of a degree when final year students must gain formal ethical approval for their final research project. Decision as to the ethical appropriateness of research are made by a Departmental Research Ethics Committee, which considers all research project proposals submitted by staff and students within the department. One of the challenges of this practice is the scale of work involved for committee members (Doyle & Buckley, 2014) who are all faculty members, and the tracking of applications and decisions, alongside the quality assurance required to ensure that all applications are treated fairly and equally. The time involved in performing this work is often underestimated by Universities, and the variety and complexity of decisions requires extensive discussion and negotiation. Traditionally, these decisions are reached by committee discussions, however this presents logistical difficulties as it requires meetings with quorate attendance. The University of Westminster launched a virtual tool in 2014 to facilitate the management of the Research Ethics Committee, to help track the progress of applications and to allow discussions to occur and be managed virtually. The Department of Psychology adopted the tools in September 2014 to deal with all ethics applications. Here we report on how this virtual committee has affected the role and practices of a working committee that deals with over 300 applications per year, and how an online ethics procedure has facilitated an integrated developmental approach to ethical education.

Supporting the Model-Driven Development of Real-time Embedded Systems with Run-Time Monitoring and Animation via Highly Customizable Code Generation

This paper presents a vision that allows the combined use of model-driven engineering, run-time monitoring, and animation for the development and analysis of components in real-time embedded systems. Key building block in the tool environment supporting this vision is a highly-customizable code generation process. Customization is performed via a configuration specification which describes the ways in which input is provided to the component, the ways in which run-time execution information can be observed, and how these observations drive animation tools. The environment is envisioned to be suitable for different activities ranging from quality assurance to supporting certification, teaching, and outreach and will be built exclusively with open source tools to increase impact. A preliminary prototype implementation is described.

Feasibility of MR-Based Body Composition Analysis in Large Scale Population Studies

Introduction Quantitative and accurate measurements of fat and muscle in the body are important for prevention and diagnosis of diseases related to obesity and muscle degeneration. Manually segmenting muscle and fat compartments in MR body-images is laborious and time-consuming, hindering implementation in large cohorts. In the present study, the feasibility and success-rate of a Dixon-based MR scan followed by an intensity-normalised, non-rigid, multi-atlas based segmentation was investigated in a cohort of 3,000 subjects. Materials and Methods 3,000 participants in the in-depth phenotyping arm of the UK Biobank imaging study underwent a comprehensive MR examination. All subjects were scanned using a 1.5 T MR-scanner with the dual-echo Dixon Vibe protocol, covering neck to knees. Subjects were scanned with six slabs in supine position, without localizer. Automated body composition analysis was performed using the AMRA Profiler™ system, to segment and quantify visceral adipose tissue (VAT), abdominal subcutaneous adipose tissue (ASAT) and thigh muscles. Technical quality assurance was performed and a standard set of acceptance/rejection criteria was established. Descriptive statistics were calculated for all volume measurements and quality assurance metrics. Results Of the 3,000 subjects, 2,995 (99.83%) were analysable for body fat, 2,828 (94.27%) were analysable when body fat and one thigh was included, and 2,775 (92.50%) were fully analysable for body fat and both thigh muscles. Reasons for not being able to analyse datasets were mainly due to missing slabs in the acquisition, or patient positioned so that large parts of the volume was outside of the field-of-view. Discussion and Conclusions In conclusion, this study showed that the rapid UK Biobank MR-protocol was well tolerated by most subjects and sufficiently robust to achieve very high success-rate for body composition analysis. This research has been conducted using the UK Biobank Resource.

Ensidesapplikationers kodkvalitet och förvaltningsbarhet : En jämförelse av förvaltningsbarhet hos single-page applications utvecklade med AngularJS och React

Single-page applications have historically been subject to strong market forces driving fast development and deployment in lieu of quality control and changeable code, which are important factors for maintainability. In this report we develop two functionally equivalent applications using AngularJS and React and compare their maintainability as defined by ISO/IEC 9126. AngularJS and React represent two distinct approaches to web development, with AngularJS being a general framework providing rich base functionality and React a small specialized library for efficient view rendering. The quality comparison was accomplished by calculating Maintainability Index for each application. Version control analysis was used to determine quality indicators during development and subsequent maintenance where new functionality was added in two steps. The results show no major differences in maintainability in the initial applications. As more functionality is added the Maintainability Index decreases faster in the AngularJS application, indicating a steeper increase in complexity compared to the React application. Source code analysis reveals that changes in data flow requires significantly larger modifications of the AngularJS application due to its inherent architecture for data flow. We conclude that frameworks are useful when they facilitate development of known requirements but less so when applications and systems grow in size. Sammanfattning: Ensidesapplikationer har historiskt sett påverkats av starka marknadskrafter som pådriver snabba utvecklingscykler och leveranser. Detta medför att kvalitetskontroll och förändringsbar kod, som är viktiga faktorer för förvaltningsbarhet, blir lidande. I denna rapport utvecklar vi två funktionellt ekvi-valenta ensidesapplikationer med AngularJS och React samt jämför dessa applikationers förvaltningsbarhet enligt ISO/IEC 9126. AngularJS och React representerar två distinkta angreppsätt på webbutveckling, där AngularJS är ett ramverk med mycket färdig funktionalitet och React ett mindre bibliotek specialiserat på vyrendering. Kvalitetsjämförelsen utfördes genom att beräkna förvaltningsbarhetsindex för respektive applikation. Versionshanteringsanalys användes för att bestämma andra kvalitetsindikatorer efter den initiala utvecklingen samt två efterföljande underhållsarbeten. Resultaten visar inga markanta skillnader i förvaltningsbarhet för de initiala applikationerna. I takt med att mer funktionalitet lades till sjönk förvaltnings-barhetsindex snabbare för AngularJS-applikationen, vilket motsvarar en kraftigare ökning i komplexitet jämfört med React-applikationen. Versionshanteringsanalys visar att ändringar i dataflödet kräver större modifikationer för AngularJS-applikationen på grund av dess förbestämda arkitektur. Utifrån detta drar vi slutsatsen att ramverk är användbara när de understödjer utvecklingen mot kända krav men att deras nytta blir begränsad ju mer en applikation växer i storlek.

Nursing Facilities Private Room Supplementation Report, May 2015

HF740 directed the Iowa Department of Human Services to begin reimbursing nursing facilities under a modified price-base case-mix reimbursement system beginning July 1, 2001. The components of the case mix reimbursement system resulted from a series of meetings that involved providers industry association representatives advocacy organization and state agency staff.

A Systematic Review of Entrepreneurship Education Literature in Nigeria: Where is the Focus of Research?

Purpose- Entrepreneurship education (EEd) plays a crucial role in the development of entrepreneurs and the enhancement of entrepreneurial activities in every economy. This paper examined what Higher education Institutions (HEIs) do in learning and teaching of entrepreneurship in general and how entrepreneurship development takes place in Nigerian HEIs. The outcome from this study will enable a deeper understanding on what HEIs do EEd, with more exposure as to what the areas and focus of research is in the Nigerian context. Design/methodology/approach- The study adopted a systematic literature review approach- drawing from a computerized search of five selected data bases, using predetermined key words by the researchers. Findings: The main finding of this paper is that, related concepts like skills, intention, drive and attitude have been use in expounding discussions on the outcome of EEd, but very little has been written on entrepreneurial mind-set (EMS), of which other studies have suggested that it’s a crucial point in the journey of an entrepreneurs (Reed & Stoltz, 2011; Quality Assurance Agency for Higher Education (QAA), 2012; Neneh, 2012). Furthermore, learning and teaching of entrepreneurship in Nigerian HEIs seems to be more on creating awareness (about entrepreneurship) than actual preparation for entrepreneurship (For entrepreneurship). Research limitations/implications- The paper is limited since it is based on a review of literature from a selected databases- covering a specific time span. This potentially excludes other studies outside this time span. A more comprehensive overview of these contributions would benefit from employing tools such as Google Scholar, for an overview of the sub–domains online. Originality/value – There are limited studies that focus on the issue of entrepreneurial mind-set in entrepreneurship education in Africa, specifically Nigeria. This paper and its focus in particular, have laid down pioneering ground work for research on entrepreneurial mind-set development in Nigerian entrepreneurship education.