Drought Climatology of Indo-Gangetic Region of India Using Remote Sensing and Crop Growth Simulation Models

Department of Atmospheric Sciences, Cochin University of Science and Technology

Ferrofluid thin films as optical gaussmeters proposed for field and magnetic moment sensing

Ferrofluids belonging to the series, Ni x Fe1-x Fe2O4 and Zn x Fe1-x Fe2O4, were synthesized using cold co-precipitation. Liquid films of these ferrofluids were prepared by encapsulating the ferrofluids in between two optically smooth and ultrasonically cleaned glass plates. Magnetic field induced laser transmission through these ferrofluid films has been investigated. Magnetic field values can be calibrated in terms of output laser power in the low field region in which the variation is linear. This set up can be used as a cheap optical gaussmeter in the low field regime. Using the same set-up, the saturation magnetization of the sample used can also be calculated with a sample that is pre-characterized. Hence both magnetization of the sample, as well as applied magnetic field can be sensed and calculated with a precalibrated sample.

Remote Sensing the Signatures of Upwelling in South Eastern Arabian Sea

In this thesis, a variety of available satellite data products have been made use of to bring out a synergistic analysis on the upwelling phenomenon in SEAS. Basic concepts of remote sensing, upwelling and linked oceanography topics have been dealt in this work .Auxiliary data products utilized in this study are described in chapter 2. The climatological monthly variability of the upwelling signatures are detailed under chapter 3. Chapter 4 presents the forcing factors that trigger the upwelling process in SEAS. Chapter 5 describes the oceanic response to the forcing factors with respect to the SST cooling and CHLA blooms. Chapter 6 presents the heat budget of the region and the variability of heat budget terms with respect to upwelling. Chapter 7 describes the inter-annual variability of upwelling intensity in SEAS and the influence of climatic events on upwelling.

Development of optical fiber sensors for selected chemical and physical sensing applications

The objective of the preset work is to develop optical fiber sensors for various physical and chemical parameters. As a part of this we initially investigated trace analysis of silica, ammonia, iron and phosphate in water. For this purpose the author has implemented a dual wavelength probing scheme which has many advantages over conventional evanescent wave sensors. Dual wavelength probing makes the design more reliable and repeatable and this design makes the sensor employable for concentration, chemical content, adulteration level, monitoring and control in industries or any such needy environments. Use of low cost components makes the system cost effective and simple. The Dual wavelength probing scheme is employed for the trace analysis of silica, iron, phosphate, and ammonia in water. Such sensors can be employed for the steam and water quality analysers in power plants. Few samples from a power plant are collected and checked the performance of developed system for practical applications.

Spatio-Temporal Changes in the Wetland Ecosystem of Cochin City using Remote Sensing and GIS

Urban developments have exerted immense pressure on wetlands. Urban areas are normally centers of commercial activity and continue to attract migrants in large numbers in search of employment from different areas. As a result, habitations keep coming up in the natural areas / flood plains. This is happening in various Indian cities and towns and large habitations are coming up in low-lying areas, often encroaching even over drainage channels. In some cases, houses are constructed even on top of nallahs and drains. In the case of Kochi the situation is even worse as the base of the urban development itself stands on a completely reclaimed island. Also the topography and geology demanded more reclamation of land when the city developed as an agglomerative cluster. Cochin is a coastal settlement interspersed with a large backwater system and fringed on the eastern side by laterite-capped low hills from which a number of streams drain into the backwater system. The ridge line of the eastern low hills provides a welldefined watershed delimiting Cochin basin which help to confine the environmental parameters within a physical limit. This leads to an obvious conclusion that if physiography alone is considered, the western flatland is ideal for urban development. However it will result in serious environmental deterioration, as it comprises mainly of wetland and for availability of land there has to be large scale filling up of these wetlands which includes shallow mangrove-fringed water sheets, paddy fields, Pokkali fields, estuary etc.Chapter 1 School 4 of Environmental Studies The urban boundaries of Cochin are expanding fast with a consequent over-stretching of the existing fabric of basic amenities and services. Urbanisation leads to the transformation of agricultural land into built-up areas with the concomitant problems regarding water supply, drainage, garbage and sewage disposal etc. Many of the environmental problems of Cochin are hydrologic in origin; like water-logging / floods, sedimentation and pollution in the water bodies as well as shoreline erosion

Ecological studies of the Parambikulam Tiger Reserve in the Western Ghats of India, using Remote Sensing and GIS

mbikulam Tiger Reserve of Western Ghats using Geospatial technology. The major objectives of the study are Land use land cover mapping (LULC) and Phytodiversity analysis. Satellite data was used to map the land use / land cover using supervised classification techniques in Erdas imagine. The change for a period of 32 years was assessed using the multi-temporal satellite datasets from Landsat MSS (1973), Landsat TM (1990), and IRS P6 LISS III (2005). A geospatial approach was used for the land cover analysis. Digital elevation models, Satellite imageries and SOI topo sheets were the data sets used in the analysis. Vegetation sampling plots distributed over the different forest types were enumerated and studied for Phytodiversity analysis.

Charakterisierung der mikrobiellen Population und Untersuchungen zum Quorum Sensing in der Rhizosphäre vom Weidelgras (Lolium perenne) auf einer Rückstandshalde der Kaliindustrie

Im Rahmen dieser Dissertation wurden die Dynamik und die Kommunikation innerhalb der mikrobiellen Population der Rhizosphäre von Deutschem Weidelgras (Lolium perenne) untersucht, welches auf einer teilweise rekultivierten Rückstandshalde der Kaliindustrie wuchs. Um die niederschlagsbedingte Auswaschung von Salzen zu reduzieren, wird die Rückstandshalde des Kaliwerks Sigmundshall (in Bokeloh bei Hannover) schrittweise mit dem technogenen Abdecksubstrat REKAL/SAV ummantelt. Dieses weist eine hohe Standfestigkeit und Wasserspeicherkapazität auf und kann zudem begrünt werden, wofür als Pionierpflanze Lolium perenne dient. Durch diese Rekultivierung wird Niederschlag besser gespeichert und über Evapotranspiration wieder in die Luft abgegeben, was letztendlich die Bildung von Salzwasser vermindert. Da das Abdecksubstrat neben alkalischem pH-Wert auch teilweise hohe Schwermetallkonzentrationen aufweist, sollte in der vorliegenden Arbeit erstmals die mikrobielle Rhizosphären-Gemeinschaft in diesem extremen Habitat mittels einer kulturunabhängigen Methode erforscht werden. Zudem wurden erste Untersuchungen angestellt, ob im Substrat die zelldichte-abhängige bakterielle Kommunikation (Quorum Sensing) nachgewiesen werden kann. Mittels extrahierter Gesamt-DNA wurde anhand der 16S rDNA die Analyse des „Terminalen Restriktonsfragmentlängenpolymorphismus“ (TRFLP) verwendet, um die komplexe bakterielle Rhizosphären-Gemeinschaft unter zeitlichen und lokalen Aspekten zu vergleichen. Auftretende Veränderungen bei den bakteriellen Populationen der jeweiligen Proben wurden durch eine Zu- oder Abnahme der auch als Ribotypen bezeichneten terminalen Restriktionsfragmente (TRF) erfasst. Hierbei zeigten sich am Südhang der Halde während der Sommermonate der Jahre 2008 und 2009 zwar Schwankungen in den bakteriellen Gemeinschaftsprofilen, es lagen jedoch keine eindeutigen Dynamiken vor. Im Vergleich zum Südhang der Halde wies der Nordhang eine höhere Ribotyp-Diversität auf, was mit der fortgeschritteneren Rekultivierung dieses Haldenabschnitts zusammenhängen könnte. Zusätzlich wurden Bakterien aus der Rhizosphäre von Lolium perenne isoliert und mithilfe der Biosensoren Agrobacterium tumefaciens A136 pCF218 pCF372 und Chromobacterium violaceum CV026 auf die Produktion von N-Acylhomoserinlactonen (AHLs) überprüft. Diese AHLs werden von Gram-negativen Mikroorganismen als Signalmoleküle verwendet, um ihre Genexpression zelldichteabhängig zu kontrollieren. Von den 47 getesteten Gram-negativen Rhizosphärenisolaten konnten nur bei einem reproduzierbar AHL-Moleküle mithilfe des Reporterstamms A. tumefaciens nachgewiesen werden. Der AHL-Produzent wurde als Pseudomonas fluorescens identifiziert. Mittels dünnschichtchromatographischer Analysen konnten die extrahierten bakteriellen AHL-Moleküle den N-Octanoyl-L-homoserinlactonen zugeordnet werden.

Contact Sensing: A Sequential Decision Approach to Sensing Manipulation Contact

This paper describes a new statistical, model-based approach to building a contact state observer. The observer uses measurements of the contact force and position, and prior information about the task encoded in a graph, to determine the current location of the robot in the task configuration space. Each node represents what the measurements will look like in a small region of configuration space by storing a predictive, statistical, measurement model. This approach assumes that the measurements are statistically block independent conditioned on knowledge of the model, which is a fairly good model of the actual process. Arcs in the graph represent possible transitions between models. Beam Viterbi search is used to match measurement history against possible paths through the model graph in order to estimate the most likely path for the robot. The resulting approach provides a new decision process that can be use as an observer for event driven manipulation programming. The decision procedure is significantly more robust than simple threshold decisions because the measurement history is used to make decisions. The approach can be used to enhance the capabilities of autonomous assembly machines and in quality control applications.

Pose Determination of a Grasped Object Using Limited Sensing

This report explores methods for determining the pose of a grasped object using only limited sensor information. The problem of pose determination is to find the position of an object relative to the hand. The information is useful when grasped objects are being manipulated. The problem is hard because of the large space of grasp configurations and the large amount of uncertainty inherent in dexterous hand control. By studying limited sensing approaches, the problem's inherent constraints can be better understood. This understanding helps to show how additional sensor data can be used to make recognition methods more effective and robust.

A three-dimensional magnetometer for motion sensing of a balloon-carried atmospheric measurement package

An instrument is described which carries three orthogonal geomagnetic field sensors on a standard meteorological balloon package, to sense rapid motion and position changes during ascent through the atmosphere. Because of the finite data bandwidth available over the UHF radio link, a burst sampling strategy is adopted. Bursts of 9s of measurements at 3.6Hz are interleaved with periods of slow data telemetry lasting 25s. Calculation of the variability in each channel is used to determine position changes, a method robust to periods of poor radio signals. During three balloon ascents, variability was found repeatedly at similar altitudes, simultaneously in each of three orthogonal sensors carried. This variability is attributed to atmospheric motions. It is found that the vertical sensor is least prone to stray motions, and that the use of two horizontal sensors provides no additional information over a single horizontal sensor