Strengthening local road safety capacity in Cambodia

Road crashes and injuries have become a growing issue worldwide. In 2011, more than 75,000 people died in road crashes in the ten member countries of the Association of South East Asian Nations (ASEAN) and many times this number sustained long term injuries. In 2014, the Asian Development Bank (ADB), funded by the Japan Fund for Poverty Reduction, commenced a package of actions to improve road safety in ASEAN. In 2015, as part of the technical assistance for this project, a Road Safety Advisor was appointed for Cambodia for four months. The assignment produced several primary outputs, which included the organization of national training on traffic law enforcement and road safety management, the conduct of a training needs survey and cost analysis study, and the development of a proposal for strengthening speed management. It is important to note that unlike other ADB technical assistance projects, this assignment adopted a capacity building approach, which promoted and encouraged the local road safety team in the government to step up and take action. The research capacity building approach adopted in this project highlighted the feasibility of increasing participation from existing stakeholders, especially the government in identifying existing human resources, building the capacity of relevant government officials and supporting them to take the ownership of the project. It is hoped that similar outcomes will occur in the other ASEAN countries.

Timing the Emergence of Resistance to Anti-HIV Drugs with Large Genetic Barriers

New antiretroviral drugs that offer large genetic barriers to resistance, such as the recently approved inhibitors of HIV-1 protease, tipranavir and darunavir, present promising weapons to avert the failure of current therapies for HIV infection. Optimal treatment strategies with the new drugs, however, are yet to be established. A key limitation is the poor understanding of the process by which HIV surmounts large genetic barriers to resistance. Extant models of HIV dynamics are predicated on the predominance of deterministic forces underlying the emergence of resistant genomes. In contrast, stochastic forces may dominate, especially when the genetic barrier is large, and delay the emergence of resistant genomes. We develop a mathematical model of HIV dynamics under the influence of an antiretroviral drug to predict the waiting time for the emergence of genomes that carry the requisite mutations to overcome the genetic barrier of the drug. We apply our model to describe the development of resistance to tipranavir in in vitro serial passage experiments. Model predictions of the times of emergence of different mutant genomes with increasing resistance to tipranavir are in quantitative agreement with experiments, indicating that our model captures the dynamics of the development of resistance to antiretroviral drugs accurately. Further, model predictions provide insights into the influence of underlying evolutionary processes such as recombination on the development of resistance, and suggest guidelines for drug design: drugs that offer large genetic barriers to resistance with resistance sites tightly localized on the viral genome and exhibiting positive epistatic interactions maximally inhibit the emergence of resistant genomes.

Improving health and safety communication of migrant construction workers

Although statistical data in some developed countries indicate that migrant workers are nearly 30% more likely to have work-related injuries than local workers, no equivalent official injury/ incident statistics on the health and safety (H&S) of migrant workers are currently tracked in Australia. With increasing numbers of migrant workers having joined Australia’s extractive industries infrastructure and commercial construction industry, this suggests the need for some investigation. A particular issue is that lack of H&S communication is one of the key factors leading to construction industry accidents/ incidents as it prevents workers from effectively receiving H&S safety training and acquiring H&S information. Migrant workers whose first languages are not English are particularly affected by this problem and ways are needed to improve their situation. The research aims to do this by evaluating the H&S communication problems of migrant workers and identify an effective H&S communication structure. An overview of the challenge being addressed by the research is firstly provided, followed by a description of the research framework, and a report of the initial findings, from which recommendations are provided for improving H&S performance in the construction industry.

Patient decision aids in routine maternity care: Benefits, barriers, and new opportunities

Background and aim Participation in decision-making, supported by comprehensive and quality information provision, is increasingly emphasised as a priority for women in maternity care. Patient decision aids are tools that can offer women greater access to information and guidance to participate in maternity care decision-making. Relative to their evaluation in controlled settings, the implementation of patient decision aids in routine maternity care has received little attention and our understanding of which approaches may be effective is limited. This paper critically discusses the application of patient decision aids in routine maternity care and explores viable solutions for promoting their successful uptake. Discussion A range of patient decision aids have been developed for use within maternity care, and controlled trials have highlighted their positive impact on the decision-making process for women. Nevertheless, evidence of successful patient decision aid implementation in real world health care settings is lacking due to practical and ideological barriers that exist. Patient-directed social marketing campaigns are a relatively novel approach to patient decision aid delivery that may facilitate their adoption in maternity care, at least in the short-term, by overcoming common implementation barriers. Social marketing may also be particularly well suited to maternity care, given the unique characteristics of this health context. Conclusions The potential of social marketing campaigns to facilitate patient decision aid adoption in maternity care highlights the need for pragmatic trials to evaluate their effectiveness. Identifying which sub-groups of women are more or less likely to respond to these strategies will further direct implementation.

Improving the outcomes of foot and ankle surgery. Professional impact of the Australasian College of Podiatric Surgeons' audit tool

Background Surgery is an example of expanded practice scope that enhances podiatry and incorporates inter-professional collaboration. By 2050 demand for foot and ankle procedures is predicted to rise nationally by 61.9%. Performance management of this increase motivated the development of an online audit tool. Developed in collaboration with the Australasian College of Podiatric Surgeons (ACPS), the ACPS audit tool provides real-time data capture and reporting. It is the first audit tool designed in Australia to support and improve the outcomes of foot and ankle surgery. Methods Audit activity in general, orthopaedic, plastic and podiatric surgery was examined using a case study design. Audit participation enablers and barriers were explored. Case study results guided a Delphi survey of international experts experienced or associated with foot and ankle surgery. Delphi survey-derived consensus informed modification of a generic data set from the Royal Australasian College of Surgeons (RACS). Based on the Delphi survey findings the ACPS online audit tool was developed and piloted. Reliability and validity of data entry and usability of this new tool was then assessed with an online survey. Results The case study found surgeon attitudes and behaviours positively impacted audit participation, and also indicated that audit data should be: (1) available in real time, (2) identify practice change, (3) applicable for safety and quality management, and; (4) useful for peer review discussion. The Delphi process established consensus on audit variables to be captured, including the modified RACS generic data set. 382 cases of foot and ankle surgery were captured across 3 months using the new tool. Data entry was found to be valid and reliable. Real-time outcome reporting and practice change identification impacted positively on safety and quality management and assisted peer review discussion. An online survey showed high levels of usability. Conclusions Surgeon contribution to audit tool development resulted in 100% audit participation. The data from the ACPS audit tool supported the ACPS submission to the Medical Services Advisory Committee to list podiatric surgery under Medicare, an outcome noted by the Federal Minister of Health.

A journey access tool to facilitate better health outcomes for people with disabilities

- Background One of the three objectives of the WHO Global Disability Action Plan 2014–2021 is removal of barriers and improved access to health services and programmes. Access to transport contributes to positive health outcomes; however, people with disabilities leaving their dwellings are confronted with barriers to their mobility. Mobility restrictions, sensory or other disabilities increase their vulnerability as road users, exposing them to higher risks of injury. PHSW and CARRS-Q have been collaborating with Handicap International Cambodia (HIC) on a Journey Access Tool (JAT). - Aims Use of the JAT is to (1) Identify transport and journey safety and barriers for people with disability and (2) Evaluation and modification of the tool after trailing to for use by NGOs and government agencies in prioritising actions around barriers. - Methodology The tool has undergone initial proof-of-concept testing in India and Viet Nam, and was trialled in Cambodia in February and May, 2015. Five teams were formed comprising a person with disability (physical, sensory or intellectual), researchers from QUT, staff from HIC, and local university students. The JAT was completed by each team and then discussed and evaluated. Two further Cambodian trials are scheduled for 2015. - Results The JAT is responsive to rural and urban contexts, and has utility for people with different disabilities. Two tools have been developed: a short version for people with a disability to complete independently, or with assistance; and a version for NGOs, DPOs and government. The tool has efficacy for advocacy.   - Conclusion The JAT has potential to assist the Mekong region with: (1) evaluating access for people with disability and other vulnerable members of the community including older people; (2) developing plans for changes to the routes in consultation with local authorities; (3) evaluating the effectiveness of implemented changes in terms of access and health; (4) inputting into policy; (5) The tool can be used for advocacy for change.

“We have to work within the system!”: Staff perceptions of organizational barriers to decision making for older adults with dementia in Australian aged care facilities

The current study explored the perceptions of direct care staff working in Australian residential aged care facilities (RACFs) regarding the organizational barriers that they believe prevent them from facilitating decision making for individuals with dementia. Normalization process theory (NPT) was used to interpret the findings to understand these barriers in a broader context. The qualitative study involved semi-structured interviews (N = 41) and focus groups (N = 8) with 80 direct care staff members of all levels working in Australian RACFs. Data collection and analysis were conducted in parallel and followed a systematic, inductive approach in line with grounded theory. The perceptions of participants regarding the organizational barriers to facilitating decision making for individuals with dementia can be described by the core category, Working Within the System, and three sub-themes: (a) finding time, (b) competing rights, and (c)not knowing. Examining the views of direct care staff through the lens of NPT allows possible areas for improvement to be identified at an organizational level and the perceived barriers to be understood in the context of promoting normalization of decision making for individuals with dementia.

Factors related to seat belt use : A Turkish case

Seat belts are effective safety devices used to protect car occupants from severe injuries and fatalities during road vehicle accidents. Despite the proven effectiveness of seat belts, seat belt use rates are quite low, especially in developing countries, such as Turkey. The general aim of the present study was to investigate a large variety of factors related to seat belt use among Turkish car occupants using different perspectives and methods and therefore, to contribute to the design of effective seat belt use interventions for increasing seat belt use rates in Turkey. Five sub-studies were conducted within the present study. In the first sub-study, environmental (e.g., road type) and psycho-social factors (e.g., belt use by other car occupants) related to the seat belt use of front-seat occupants were investigated using observation techniques. Being male, of a young age, and traveling on city roads were the main factors negatively related to seat belt use. Furthermore, seat belt use by the drivers and front-seat passengers was highly correlated and a significant predictors of each other. In the second sub-study, the motivations of the car occupants for seat belt use and non-use were investigated using interview techniques. Situational conditions, such as traveling on city roads and for short distances, and not believing in the effectiveness and relevance of seat belt use for safety, were the most frequently reported reasons for not using a seat belt. Safety, habit and avoiding punishment were among the most frequently reported reasons for using a seat belt. In the third sub-study, the Theory of Planned Behavior (TPB) and the Health Belief Model (HBM) were applied to seat belt use using Structural Equation Modeling techniques. The TPB model showed a good fit to the data, whereas the HBM showed a poor fit to the data. Within the TPB model, attitude and subjective norm were significant predictors of intentions to use a seat belt on both urban and rural roads. In the fourth sub-study, seat belt use frequency and motivations for seat belt use among taxi drivers were investigated and compared between free-time and work-time driving using a survey. The results showed that taxi drivers used seat belts more when driving a private car in their free-times compared to when driving a taxi during their work-times. The lack of a legal obligation to use a seat belt in city traffic and fear of being attacked or robbed by the passengers were found as two specific reasons for not using a seat belt when driving a taxi. Lastly, in the fifth sub-study, the relationship of seat belt use to driver and health behaviors was investigated using a survey. Although seat belt use was related both to health and driver behaviors, factor analysis results showed that it grouped with driver behaviors. Based on the results of the sub-studies, a tentative empirical model showing different predictors of seat belt use was proposed. According to the model, safety and normative motivations and perceived physical barriers related to seat belt use are the three important predictors of seat belt use. Keywords: Seat belt use; environmental factors; psycho-social factors; safety and normative motivations; the Theory of Planned Behavior; the Health Belief Model; health behaviors; driver behaviors; front-seat occupants; taxi drivers; Turkey.

The regional differences between countries in traffic safety: A cross-cultural study and Turkish Case

Road traffic accidents are a large problem everywhere in the world. However, regional differences in traffic safety between countries are considerable. For example, traffic safety records are much worse in Southern Europe and the Middle East than in Northern and Western Europe. Despite the large regional differences in traffic safety, factors contributing to different accident risk figures in different countries and regions have remained largely unstudied. The general aim of this study was to investigate regional differences in traffic safety between Southern European/Middle Eastern (i.e., Greece, Iran, Turkey) and Northern/Western European (i.e., Finland, Great Britain, The Netherlands) countries and to identify factors related to these differences. We conducted seven sub-studies in which I applied a traffic culture framework, including a multi-level approach, to traffic safety. We used aggregated level data (national statistics), surveys among drivers, and data on traffic accidents and fatalities in the analyses. In the first study, we investigated the influence of macro level factors (i.e., economic, societal, and cultural) on traffic safety across countries. The results showed that a high GNP per capita and conservatism correlated with a low number of traffic fatalities, whereas a high degree of uncertainty avoidance, neuroticism, and egalitarianism correlated with a high number of traffic fatalities. In the second, third, and fourth studies, we examined whether the conceptualisation of road user characteristics (i.e., driver behaviour and performance) varied across traffic cultures and how these factors determined overall safety, and the differences between countries in traffic safety. The results showed that the factorial agreement for driver behaviour (i.e., aggressive driving) and performance (i.e., safety skills) was unsatisfactory in Greece, Iran, and Turkey, where the lack of social tolerance and interpersonal aggressive violations seem to be important characteristics of driving. In addition, we found that driver behaviour (i.e., aggressive violations and errors) mediated the relationship between culture/country and accidents. Besides, drivers from "dangerous" Southern European countries and Iran scored higher on aggressive violations and errors than did drivers from "safe" Northern European countries. However, "speeding" appeared to be a "pan-cultural" problem in traffic. Similarly, aggressive driving seems largely depend on road users' interactions and drivers' interpretation (i.e., cognitive biases) of the behaviour of others in every country involved in the study. Moreover, in all countries, a risky general driving style was mostly related to being young and male. The results of the fifth and sixth studies showed that among young Turkish drivers, gender stereotypes (i.e., masculinity and femininity) greatly influence driver behaviour and performance. Feminine drivers were safety-oriented whereas masculine drivers were skill-oriented and risky drivers. Since everyday driving tasks involve not only erroneous (i.e., risky or dangerous driving) or correct performance (i.e., normal habitual driving), but also "positive" driver behaviours, we developed a reliable scale for measuring "positive" driver behaviours among Turkish drivers in the seventh study. Consequently, I revised Reason's model [Reason, J. T., 1990. Human error. Cambridge University Press: New York] of aberrant driver behaviour to represent a general driving style, including all possible intentional behaviours in traffic while evaluating the differences between countries in traffic safety. The results emphasise the importance of economic, societal and cultural factors, general driving style and skills, which are related to exposure, cognitive biases as well as age, sex, and gender, in differences between countries in traffic safety.

Overcoming Barriers to People of Color in Union Leadership

[Excerpt] It has been 10 years since the report on full participation. In preparation for the 2005 AFL-CIO Convention, the AFL-CIO, under the direction of the Executive Council’s Civil and Human Rights Committee, initiated a study to consider what other steps can be taken to address the underrepresentation of people of color in union leadership. It is hoped that this report will serve as a complement to a similar report on working women that was submitted to the Executive Council by the Executive Council’s Working Women’s Committee in March 2004, entitled, “Overcoming Barriers to Women in Organizing and Leadership.”

Design and Development of an In-Vehicle Human Machine Interface to Improve Fuel Efficiency & Safety

Road transport plays a significant role in various industries and mobility services around the globe and has a vital impact on our daily lives. However it also has serious impacts on both public health and the environment. In-vehicle feedback systems are a relatively new approach to encouraging driver behaviour change for improving fuel efficiency and safety in automotive environments. While many studies claim that the adoption of eco-driving practices, such as eco-driving training programs and in-vehicle feedback to drivers, has the potential to improve fuel efficiency, limited research has integrated safety and eco-driving. Therefore, this research seeks to use human factors related theories and practices to inform the design and evaluation of an in-vehicle Human Machine Interface (HMI) providing real-time driver feedback with the aim of improving both fuel efficiency and safety.

The development of a component to improve the loading safety of bone-anchored prostheses

Use of socket prostheses Currently, for individuals with limb loss, the conventional method of attaching a prosthetic limb relies on a socket that fits over the residual limb. However, there are a number of issues concerning the use of a socket (e.g., blisters, irritation, and discomfort) that result in dissatisfaction with socket prostheses, and these lead ultimately a significant decrease in quality of life. Bone-anchored prosthesis Alternatively, the concept of attaching artificial limbs directly to the skeletal system has been developed (bone anchored prostheses), as it alleviates many of the issues surrounding the conventional socket interface.Bone anchored prostheses rely on two critical components: the implant, and the percutaneous abutment or adapter, which forms the connection for the external prosthetic system (Figure 1). To date, an implant that screws into the long bone of the residual limb has been the most common intervention. However, more recently, press-fit implants have been introduced and their use is increasing. Several other devices are currently at various stages of development, particularly in Europe and the United States. Benefits of bone-anchored prostheses Several key studies have demonstrated that bone-anchored prostheses have major clinical benefits when compared to socket prostheses (e.g., quality of life, prosthetic use, body image, hip range of motion, sitting comfort, ease of donning and doffing, osseoperception (proprioception), walking ability) and acceptable safety, in terms of implant stability and infection. Additionally, this method of attachment allows amputees to participate in a wide range of daily activities for a substantially longer duration. Overall, the system has demonstrated a significant enhancement to quality of life. Challenges of direct skeletal attachment However, due to the direct skeletal attachment, serious injury and damage can occur through excessive loading events such as during a fall (e.g., component damage, peri-prosthetic fracture, hip dislocation, and femoral head fracture). These incidents are costly (e.g., replacement of components) and could require further surgical interventions. Currently, these risks are limiting the acceptance of bone-anchored technology and the substantial improvement to quality of life that this treatment offers. An in-depth investigation into these risks highlighted a clear need to re-design and improve the componentry in the system (Figure 2), to improve the overall safety during excessive loading events. Aim and purposes The ultimate aim of this doctoral research is to improve the loading safety of bone-anchored prostheses, to reduce the incidence of injury and damage through the design of load restricting components, enabling individuals fitted with the system to partake in everyday activities, with increased security and self-assurance. The safety component will be designed to release or ‘fail’ external to the limb, in a way that protects the internal bone-implant interface, thus removing the need for restorative surgery and potential damage to the bone. This requires detailed knowledge of the loads typically experienced by the limb and an understanding of potential overload situations that might occur. Hence, a comprehensive review of the loading literature surrounding bone anchored prostheses will be conducted as part of this project, with the potential for additional experimental studies of the loads during normal activities to fill in gaps in the literature. This information will be pivotal in determining the specifications for the properties of the safety component, and the bone-implant system. The project will follow the Stanford Biodesign process for the development of the safety component.

Traffic safety at road–rail level crossings using a driving simulator and traffic simulation

Several intelligent transportation systems (ITS) were used with an advanced driving simulator to assess its influence on driving behavior. Three types of ITS interventions were tested: video in vehicle, audio in vehicle, and on-road flashing marker. The results from the driving simulator were inputs for a developed model that used traffic microsimulation (VISSIM 5.4) to assess the safety interventions. Using a driving simulator, 58 participants were required to drive through active and passive crossings with and without an ITS device and in the presence or absence of an approaching train. The effect of changes in driver speed and compliance rate was greater at passive crossings than at active crossings. The slight difference in speed of drivers approaching ITS devices indicated that ITS helped drivers encounter crossings in a safer way. Since the traffic simulation was not able to replicate a dynamic speed change or a probability of stopping that varied depending on ITS safety devices, some modifications were made to the traffic simulation. The results showed that exposure to ITS devices at active crossings did not influence drivers’ behavior significantly according to the traffic performance indicator, such as delay time, number of stops, speed, and stopped delay. However, the results of traffic simulation for passive crossings, where low traffic volumes and low train headway normally occur, showed that ITS devices improved overall traffic performance.