Photoelastic analysis of the influence of residual ridge inclination in conjugated class i mandibular prostheses with different attachment systems

Objectives: The aim of this study was to evaluate the stress distribution in mandibular free-end removable partial dentures (RPD) associated with FPD in the abutment teeth considering different inclinations of the residual ridge: (1) horizontal and (2) distal descending ridges and two designs of free-end RPD with different attachment systems were tested: (1) clasp and (2) system ERA. Methods. Axial loads (100 N) were applied on the teeth of the RPD. The images were recorded and the stress distribution was evaluated through photoelastic fringes. Results. In general, the distal descending ridge presented more photoelastic fringes in the region of the roots of the abutment teeth while the horizontal ridge exhibited higher compression in the base of the prosthesis. In the horizontal ridge, the denture with clasp presented more favourable stress distribution than the denture with the system ERA. In the distal descending ridge, the denture with the system ERA relieved the region of the abutment teeth and overloaded the residual ridge. Conclusion: The horizontal ridge presented more favourable performance; the dentures with clasp exhibited better performance for both ridges evaluated; the denture with the system ERA presented better results in the distal descending ridge. © 2013 Informa Healthcare.

Cloreto de potássio revestido em efeito residual no feijoeiro de inverno irrigado na região de cerrado

In order to maintain the nutrients available to plants have been studied controlled release fertilizers. In this context, the objective was to evaluate the residual effect of doses of potassium chloride, coated or not, applied in the corn crop, regarding the crop components and grains yield of irrigated winter common bean, cultivated in followed, in Cerrado region. The experiment was conducted in Selvíria - MS, Brazil, 51°22- west longitude and 20°22- south latitude, in a clayey Oxisol, in 2009 and 2010. A randomized block design with four repetitions was used, disposed in a factorial scheme 4 x 2, being: four K2O doses (0, 40, 80 and 120 kg ha-1) and two potassium sources (potassium chloride and coated potassium chloride by polymers) applied at sowing in the corn crop. The coated potassium chloride by polymers have the same residual effect as conventional KCl, because it provides results similar for the K and chlorophyll leaf contents, crop components and grains yield of winter common bean irrigated. The increment of potassium doses in the previous crop (corn) have residual effect, because it influenced positively the number of grains per plant in 2009 and increased linearly the chlorophyll leaf content and the grains yield of winter common bean irrigated in 2010, regardless of the source used for K.

On the influence of the mode-shapes of a marine propulsion shafting system on the prediction of torsional stresses

Torsional vibration predictions and measurements of a marine propulsion system, which has both damping and a highly flexible coupling, are presented in this paper. Using the conventional approach to stress prediction in the shafting system, the numerical predictions and the experimental torsional vibration stress curves in some parts of the shafting system are found to be quite different. The free torsional vibration characteristics and forced torsional vibration response of the system are analyzed in detail to investigate this phenomenon. It is found that the second to fourth natural modes of the shafting system have significant local deformation. This results in large torsional resonant responses in different sections of the system corresponding to different engine speeds. The results show that when there is significant local deformation in the shafting system for different modes, then multi-point measurements should be made, rather than the conventional method of using a single measurement at the free end of the shaft, to obtain the full torsional vibration characteristics of the shafting system.

Efeito residual de fontes de fósforo nos atributos químicos do solo, nutrição e produtividade de biomassa da cana-de-açúcar

In tropical regions, the residual effect of phosphate fertilizer source is of crucial importance. This study aimed to evaluate the effects of application of P sources in chemical properties of soil, nutrition and productivity of sugarcane plant and during the first and second ratoon. The sources of P applied in furrows at planting were, triple superphosphate, Arad phosphate, bone meal (100 kg ha-1 P2O5 total) and a control without P, the varieties of sugarcane studied were IAC86-2480 and SP79-1011. A randomized block design in a 4 × 2 factorial was used, with four replications. The study was conducted in the municipality of Alta Floresta-MT, Brazil, in Typic Hapludox. After each cutting, in soil P content, pH and Ca were evaluated. In the plant, the production of green and dry matter of shoots, the concentration of P in the biomass harvested, the export of P and agronomic efficiency of the sources of P were determined. The bone meal had a higher agronomic efficiency resulted in greater accumulation and export of P by crop, higher content of available Ca and P and increase soil pH. The Arad reactive phosphate increased its agronomic efficiency between crop cycles.

Sistemas de manejo e efeito residual do potássio na produtividade e nutrição do feijão-caupi

Cowpea [Vigna unguiculata (L) Walp] have great social and economic importance for the Para State. It grows well in areas with low precipitation and two crop cycles can be obtained annually. This study aimed to assess the effect of the residual fertilization from a previous culture (Sorghum bicolor L. Moench) and crop systems on cowpea yield and macronutrient concentration on leaves of three cowpea cultivars (BRSMilênio, BRS-Urubuquara e BRS-Guariba). The study was conducted at the UFRA. The treatments were two crop systems (minimum tillage and conventional), four levels of potassium (50, 100, 200 e 300 kg de KCl ha-1 applied to a previous sorghum culture) and the three cowpea cultivars. Treatments were organized as a three (4 x 2 x 3) factor experiment on a randomized complete block design. The soil was a yellow latosol. In each experiment plot five plants were selected to determine shoot dry matter and foliar nutrient concentration. Grain yield was determined after harvesting all plants on the experiment plot. The residual KCl fertilization affected foliar nutrient content, but did not affect shoot dry mass or yield of grain. Yield was higher in the minimum tillage system. Highest yield (1590 kg ha-1) was recorded int the cv. 'Guariba' when 100 kg of KCl ha-1 had been used in the previous crop. The highest content of leaf N and K was found in cowpea under minimum tillage system. The amount of P and Mg were higher in the conventional system whereas the amount of Ca did not change.

A model for computing vibration induced stresses of electronic components in a general flexible mounting

This paper develops a novel full analytic model for vibration analysis of solid-state electronic components. The model is just as accurate as finite element models and numerically light enough to permit for quick design trade-offs and statistical analysis. The paper shows the development of the model, comparison to finite elements and an application to a common engineering problem. A gull-wing flat pack component was selected as the benchmark test case, although the presented methodology is applicable to a wide range of component packages. Results showed very good agreement between the presented method and finite elements and demonstrated the usefulness of the method in how to use standard test data for a general application. © 2013 Elsevier Ltd.

Efeito residual da aplicação superficial de calcário e gesso nas culturas de soja, aveia-preta e sorgo granífero

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito residual do calcário no solo, no estado nutricional e na produtividade da mangueira cv. Palmer

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Efeito residual do calcário e da escória de siderurgia na primeira soqueira da cultura da cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de biodiesel a partir de óleo residual reciclado e realização de testes comparativos com outros tipos de biodiesel e proporções de mistura em um moto-gerador

Pós-graduação em Engenharia Mecânica - FEIS

Propagação da atitude de satélites artificiais estabilizados por rotação: torque residual médio com o modelo de quadripolo para o campo geomagnético

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cogeração a partir da biomassa residual de cana-de-açúcar: estudo de caso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Eficácia e período residual do diflubenzuron para o controle de larvas de Aedes aegypti resistentes ao temefós

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Satelites estabilizados por rotação e torque magnético residual

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)