Microfluidic processor allows rapid HER2 immunohistochemistry of breast carcinomas and significantly reduces ambiguous (2+) read-outs.

Biomarker analysis is playing an essential role in cancer diagnosis, prognosis, and prediction. Quantitative assessment of immunohistochemical biomarker expression on tumor tissues is of clinical relevance when deciding targeted treatments for cancer patients. Here, we report a microfluidic tissue processor that permits accurate quantification of the expression of biomarkers on tissue sections, enabled by the ultra-rapid and uniform fluidic exchange of the device. An important clinical biomarker for invasive breast cancer is human epidermal growth factor receptor 2 [(HER2), also known as neu], a transmembrane tyrosine kinase that connotes adverse prognostic information for the patients concerned and serves as a target for personalized treatment using the humanized antibody trastuzumab. Unfortunately, when using state-of-the-art methods, the intensity of an immunohistochemical signal is not proportional to the extent of biomarker expression, causing ambiguous outcomes. Using our device, we performed tests on 76 invasive breast carcinoma cases expressing various levels of HER2. We eliminated more than 90% of the ambiguous results (n = 27), correctly assigning cases to the amplification status as assessed by in situ hybridization controls, whereas the concordance for HER2-negative (n = 31) and -positive (n = 18) cases was 100%. Our results demonstrate the clinical potential of microfluidics for accurate biomarker expression analysis. We anticipate our technique will be a diagnostic tool that will provide better and more reliable data, onto which future treatment regimes can be based.

Evaluation of methoprene effect on Aedes aegypti (Diptera: Culicidae) development in laboratory conditions

Several Brazilian Aedes aegypti populations are resistant to the larvicidae temephos. Methoprene, that inhibits adult emergence, is one of the alternatives envisaged by the Brazilian Dengue Control Program (PNCD). However, at Brazil vector infestation rates are measured through larvae indexes and it has been claimed that methoprene use in the field could face operational problems. In order to define a standardized protocol, methoprene effect was evaluated in laboratory conditions after continuous exposure of larvae (Rockefeller strain) to a methoprene formulation available to the PNCD. Methoprene-derived mortality occurs mainly at the pupa stage and pupa development is inversely proportional to methoprene concentration. Number and viability of eggs laid by treated and control females are equivalent. A methoprene dose-dependent delay in the development was noted; however, b correlations were found for total mortality or adult emergence inhibition if data obtained when all control mosquitoes have emerged are compared to data obtained when methoprene-treated groups finish development. The cumulative record of total methoprene-induced mortality at the time control adults emerge is proposed for routine evaluation of field populations. Mortality of all specimens, but not of larva, could account for adult emergence inhibition, confirming the inadequacy of larvae indexes to evaluate methoprene effect.

Laboratory estimation of the effects of increasing temperatures on the duration of gonotrophic cycle of Anopheles albimanus (Diptera: Culicidae)

The increase of malaria transmission in the Pacific Coast of Colombia during the occurrence of El Niño warm event has been found not to be linked to increases in the density of the vector Anopheles albimanus, but to other temperature-sensitive variables such as longevity, duration of the gonotrophic cycle or the sporogonic period of Plasmodium. The present study estimated the effects of temperature on duration of the gonotrophic cycle and on maturation of the ovaries of An. albimanus. Blood fed adult mosquitoes were exposed to temperatures of 24, 27, and 30°C, held individually in oviposition cages and assessed at 12 h intervals. At 24, 27, and 30°C the mean development time of the oocytes was 91.2 h (95% C.I.: 86.5-96), 66.2 h (61.5-70.8), and 73.1 h (64-82.3), respectively. The mean duration of the gonotrophic cycle for these three temperatures was 88.4 h (81.88-94.9), 75 h (71.4-78.7), and 69.1 h (64.6-73.6) respectively. These findings indicate that both parameters in An. albimanus are reduced when temperatures rose from 24 to 30°C, in a nonlinear manner. According to these results the increase in malaria transmission during El Niño in Colombia could be associated with a shortening of the gonotrophic cycle in malaria vectors, which could enhance the frequency of man-vector contact, affecting the incidence of the disease.

Environmental and biological controls on the geochemistry (δ18O, δ13C, Mg/Ca, and Sr/Ca) of living ostracods from Lake Geneva

ABSTRACT : Ostracods are benthic microcrustaceans enclosed in low-Mg calcite bivalves. Stable isotope compositions, Mg/Ca, and Sr/Ca ratios of ostracod fossil valves have proven useful to reconstruct past environmental conditions. Yet, several discrepancies persist and the influence of many factors remains unclear. It is the aim of this study to improve the use of ostracod valve geochemistry as palaeoenvironmental proxies by examining the extent of isotope fractionation and trace element partitioning during valve calcification. To achieve this, the environmental parameters (pH, temperature) and chemical composition of water (C-and O-isotope composition and calcium, magnesium, and strontium content) were measured at sites where living ostracods were sampled. The sampling was on a monthly basis over the course of one year at five different water depths (2, 5, 13, 33, and 70 m) in Lake Geneva, Switzerland. The one-year sampling enabled collection of environmental data for bottom and interstitial pore water. In littoral to sublittoral zones, C-isotope composition of DIC and the Mg/Ca and Sr/Ca ratios of water are found to vary concomitantly with water temperature. This is due to the precipitation of calcite, which is induced by higher photosynthetic activity as temperature and/or solar radiation intensify in summer. In deeper zones, environmental parameters remain largely constant throughout the year. Variations of pH, DIC concentrations and C-isotope compositions in interstitial water result from aerobic as well as anaerobic respiration, calcite dissolution and methanogenesis. Bathymetric distribution, life cycles, and habitats were derived for 15 ostracod species and are predominantly related to water temperature and sediment texture. O-isotope compositions of ostracod valves in Lake Geneva reflect that of water and temperature. However, offsets of up to 3 permil are observed in comparison with proposed inorganic calcite precipitation equilibrium composition. Deprotonation of HCO3- and/or salt effect at crystallisation sites may explain the disequilibrium observed for O-isotopic compositions. C-isotope compositions of ostracod valves are not as well constrained and appear to be controlled by a complex interaction between habitat preferences and seasonal as well as spatial variations of the DIC isotope composition. For infaunal forms, C-isotope compositions reflect mainly the variation of DIC isotope composition in interstitial pore waters. For epifaunal forms, C-isotope compositions reflect the seasonal variation of DIC isotope compositions. C-isotope compositions of ostracod valves is at equilibrium with DIC except for a small number of species (L. inopinata, L. sanctipatricii and possibly C. ophtalmica, and I. beauchampi). Trace element uptake differs considerably from species to species. For most epifaunal forms, trace element content follows the seasonal cycle, recording temperature increases and/or variations of Mg/Ca and Sr/Ca ratios of water. In contrast, infaunal forms are predominantly related to sediment pore water chemistry. RÉSUMÉ EN FRANÇAIS : Les ostracodes sont de petits crustacés benthiques qui possèdent une coquille faite de calcite à faible teneur en magnésium. La composition isotopique et les rapports Mg/Ca et Sr/Ca d'ostracodes fossiles ont été utilisés maintes fois avec succès pour effectuer des reconstructions paléoenvironnementales. Néanmoins, certains désaccords persistent sur l'interprétation de ces données. De plus, l'influence de certains facteurs pouvant biaiser le signal reste encore inconnue. Ainsi, le but de cette étude est de rendre plus performant l'emploi de la composition géochimique des ostracodes comme indicateur paléoenvironnemental. Pour réaliser cela, cinq sites situés dans le Léman à 2, 5, 13, 33 et 70 m de profondeur ont été choisis pour effectuer les échantillonnages. Chaque site a été visité une fois par mois durant une année. Les différents paramètres environnementaux (pH, température) ainsi que la composition géochimique de l'eau (composition isotopique de l'oxygène et du carbone ainsi que teneur en calcium, magnésium et strontium) ont été déterminés pour chaque campagne. Des ostracodes vivants ont été récoltés au cinq sites en même temps que les échantillons d'eau. Ce travail de terrain a permis de caractériser la géochimie de l'eau se trouvant juste au-dessus des sédiments ainsi que celle de l'eau se trouvant dans les interstices du sédiment. Dans les zones littorales à sublittorales, la composition isotopique du carbone inorganique dissout (CID) ainsi que les rapports Mg/Ca et Sr/Ca de l'eau varient linéairement avec la température. Ceci peut être expliqué par la précipitation de calcite qui est contrôlée par l'activité photosynthétique, variant elle même linéairement avec la température. Dans les zones plus profondes, les paramètres environnementaux restent relativement constants tout au long de l'année. Les variations du pH, de la concentration et de la composition isotopique du CID dans les sédiments résultent de la libération de carbone engendrée par la dégradation de la matière organique avec présence d'oxygène ou via réduction de nitrates et de sulfates, par la dissolution de carbonates, ainsi que par la méthanogenèse. La distribution bathymétrique, le cycle de vie ainsi que l'habitat de 15 espèces ont été déterminés. Ceux-ci sont principalement reliés à la température de l'eau et à la texture des sédiments. La composition isotopique de l'oxygène des valves d'ostracodes reflète celle de l'eau et la température qui régnait lors de la calcification. Néanmoins, des écarts pouvant aller jusqu'à 3 0/00 par rapport à l'équilibre théorique ont été obtenus. La déprotonation de HCO3 ou un 'effet de sel' pourrait être à l'origine du déséquilibre observé. La composition isotopique du carbone des valves d'ostracodes n'est pas aussi bien cernée. Celle-ci semble être principalement contrôlée par une interaction complexe entre l'habitat des ostracodes et les variations saisonnières et spatiales de la composition isotopique du CID. Pour les espèces endofaunes, la composition isotopique du carbone reflète principalement la variation de la composition isotopique du CID à l'intérieur des sédiments. Pour les formes épifaunes, c'est la variation saisonnière de la composition du CID qui contrôle celle de la coquille des ostracodes. En général, la composition isotopique du carbone des valves d'ostracodes est en équilibre avec celle de CID, hormis pour quelques rares espèces (L. inopinata, L. sanctipatricii et peut-être C. ophtalmica et I. beauchampi). L'incorporation des éléments traces diffère passablement d'une espèce à l'autre. Pour la plupart des espèces épifaunes, la teneur en éléments traces des coquilles reflète les variations saisonnières. Ces espèces semblent enregistrer les variations soit de la température soit des rapports Mg/Ca et Sr/Ca de l'eau. La teneur en élément traces des formes infaunales, au contraire, est principalement reliée à la chimie de l'eau interstitielle. RÉSUMÉ GRAND-PUBLIC : La connaissance de l'évolution du climat dans le futur est primordiale pour notre société, car elle permet de développer différentes stratégies pour faire face aux problèmes engendrés pas le changement climatique : stratégies environnementale, humanitaire, ou encore économique. Cette problématique est actuellement, à juste titre, sujet d'une vive préoccupation. La géologie peut-elle contribuer à l'effort communautaire entrepris? Naturellement, ce sont les climatologues qui sont sur le devant de la scène. Il n'empêche que ces derniers, pour pouvoir prédire l'avenir, doivent s'appuyer sur le passé. La géologie est alors d'un grand intérêt car c'est effectivement la seule science qui permette d'estimer les variations climatiques à grande échelle sur de longues périodes. Ainsi, voulant moi-même contribuer aux recherches menées dans ce domaine, je me suis tourné à la fin de mes études vers la paléoclimatologie, science qui a pour but de reconstruire le climat des temps anciens. Nous nous sommes rendu compte que l'évolution climatique de la région où nous habitons n'avait pas encore fait le sujet d'études approfondies. Il est pourtant important de connaître la variation locale des changements climatiques pour obtenir des modèles climatiques fiables. En conséquence, un vaste projet a vu le jour : reconstruire, à l'aide des sédiments du lac Léman, les variations paléoclimatiques et paléo-environnementales depuis le retrait du Glacier de Rhône, il y a environ 15'000 ans, jusqu'à nos jours. Pour ce genre de travail, la géochimie, qui est une forme de chimie, utilisée en science de la terre regroupant la chimie classique et la chimie isotopique, est une alliée particulièrement efficace. Elle permet en effet, via différentes mesures faites sur des archives géologiques (par exemple des fossiles ou des sédiments) d'obtenir des informations, souvent quantitatives, sur les conditions (le climat, la flore ou encore la bio productivité, etc...) qui régnaient il y a fort longtemps. Les coquilles d'ostracodes, qui sont de petits animaux vivant au fond des lacs, sont une des archives les plus prometteuses. Ces animaux sont des petits crustacés s'entourant d'une coquille calcaire qu'ils sécrètent eux-mêmes. A la mort de l'animal, la coquille est intégrée dans les sédiments et reste intacte à travers les âges. Des études ont montré qu'en analysant la géochimie de ces coquilles fossiles, il est possible de reconstruire les conditions environnementales qui régnaient à l'époque de vie de ces fossiles. Cette démarche nécessite qu'une condition bien précise soit remplie: la composition géochimique de la coquille doit enregistrer de manière fidèle la chimie de l'eau et/ou la température de l'eau présentes au moment de la sécrétion de la coquille. Le but spécifique de notre recherche a précisément été d'étudier la façon dont la chimie de l'eau ainsi que sa température sont enregistrées dans la coquillé des ostracodes. Une fois les relations entre ces divers paramètres dans l'étant actuel du système établies, il sera alors possible de les utiliser pour interpréter des données issues de coquilles fossiles. Pour ce faire, nous avons mesuré la température de l'eau de manière continue et récolté mensuellement des échantillons d'eau et des ostracodes vivants pendant une année. Cinq sites situés à 2, 5, 13, 33 et 70 mètres de profondeur ont été choisis pour effectuer ces échantillonnages dans le Léman. Le travail de terrain nous a amené à étudier la biologie de 15 espèces. Nous avons pu établir la profondeur à laquelle vivent ces animaux, leur période de développement ainsi que leur habitat respectifs. Ces résultats ont permis de mieux cerner la relation qu'il existe entre la chimie de l'eau, sa température et la composition géochimique des coquilles d'ostracodes. Nous avons ainsi pu confirmer que les coquilles d'ostracodes enregistrent de manière fidèle la composition chimique et isotopique de l'eau. De même, nous avons pu établir de manière plus précise l'effet de la température sur la géochimie des coquilles. Néanmoins, les relations trouvées entre ces trois éléments sont plus complexes pour certaines espèces, cette complexité étant souvent liée à un caractère spécifique de leur écologie. Nous avons mis en lumière certains effets qui biaisent les résultats et défini précisément les conditions dans lesquelles on peut s'attendre à avoir des difficultés dans leur interprétation. Maintenant que nous avons établi les relations entre le climat actuel et la composition géochimique des coquilles d'ostracodes actuels, nous pouvons, sur la base de ce modèle, reconstruire le climat depuis le retrait du Glacier du Rhône jusqu'à nos jours à l'aide d'ostracodes fossiles. Mais cela est une autre histoire et fera, je l'espère, le sujet de nos futures recherches.

Ecologie industrielle de l'aluminium, flux de matières et d'énergie : réalités et enjeux du recyclage

Dans les dernières années du 20ème siècle, l'aluminium a fait l'objet de beaucoup de communications outrancières et divergentes cautionnées par des scientifiques et des organismes faisant autorité. En 1986, la société PECHINEY le décrète perpétuel tel le mouvement « L'aluminium est éternel. Il est recyclable indéfiniment sans que ses propriétés soient altérées », ce qui nous avait alors irrité. Peu de temps après, en 1990, une communication tout aussi outrancière et irritante d'une grande organisation environnementale, le World Wild Fund, décrète que « le recyclage de l'aluminium est la pire menace pour l'environnement. Il doit être abandonné ». C'est ensuite à partir de la fin des années 1990, l'explosion des publications relatives au développement durable, le bien mal nommé. Au développement, synonyme de croissance obligatoire, nous préférons société ou organisation humaine et à durable, mauvaise traduction de l'anglais « sustainable », nous préférons supportable : idéalement, nous aurions souhaité parler de société durable, mais, pour être compris de tous, nous nous sommes limités à parler dorénavant de développement supportable. Pour l'essentiel, ces publications reconnaissent les très graves défauts de la métallurgie extractive de l'aluminium à partir du minerai et aussi les mérites extraordinaires du recyclage de l'aluminium puisqu'il représente moins de 10% de la consommation d'énergie de la métallurgie extractive à partir du minerai (on verra que c'est aussi moins de 10% de la pollution et du capital). C'est précisément sur le recyclage que se fondent les campagnes de promotion de l'emballage boisson, en Suisse en particulier. Cependant, les données concernant le recyclage de l'aluminium publiées par l'industrie de l'aluminium reflètent seulement en partie ces mérites. Dans les années 1970, les taux de croissance de la production recyclée sont devenus plus élevés que ceux de la production électrolytique. Par contre, les taux de recyclage, établis à indicateur identique, sont unanimement tous médiocres comparativement à d'autres matériaux tels le cuivre et le fer. Composante de l'industrie de l'aluminium, le recyclage bénéficie d'une image favorable auprès du grand public, démontrant le succès des campagnes de communication. A l'inverse, à l'intérieur de l'industrie de l'aluminium, c'est une image dévalorisée. Les opinions émises par tous les acteurs, commerçants, techniciens, dirigeants, encore recueillies pendant ce travail, sont les suivantes : métier de chiffonnier, métier misérable, métier peu technique mais très difficile (un recycleur 15 d'aluminium n'a-t-il pas dit que son métier était un métier d'homme alors que celui du recycleur de cuivre était un jeu d'enfant). A notre avis ces opinions appartiennent à un passé révolu qu'elles retraduisent cependant fidèlement car le recyclage est aujourd'hui reconnu comme une contribution majeure au développement supportable de l'aluminium. C'est bien pour cette raison que, en 2000, l'industrie de l'aluminium mondiale a décidé d'abandonner le qualificatif « secondaire » jusque là utilisé pour désigner le métal recyclé. C'est en raison de toutes ces données discordantes et parfois contradictoires qu'a débuté ce travail encouragé par de nombreuses personnalités. Notre engagement a été incontestablement facilité par notre connaissance des savoirs indispensables (métallurgie, économie, statistiques) et surtout notre expérience acquise au cours d'une vie professionnelle menée à l'échelle mondiale dans (recherche et développement, production), pour (recherche, développement, marketing, stratégie) et autour (marketing, stratégie de produits connexes, les ferro-alliages, et concurrents, le fer) de l'industrie de l'aluminium. Notre objectif est de faire la vérité sur le recyclage de l'aluminium, un matériau qui a très largement contribué à faire le 20ème siècle, grâce à une revue critique embrassant tous les aspects de cette activité méconnue ; ainsi il n'y a pas d'histoire du recyclage de l'aluminium alors qu'il est plus que centenaire. Plus qu'une simple compilation, cette revue critique a été conduite comme une enquête scientifique, technique, économique, historique, socio-écologique faisant ressortir les faits principaux ayant marqué l'évolution du recyclage de l'aluminium. Elle conclut sur l'état réel du recyclage, qui se révèle globalement satisfaisant avec ses forces et ses faiblesses, et au-delà du recyclage sur l'adéquation de l'aluminium au développement supportable, adéquation largement insuffisante. C'est pourquoi, elle suggère les thèmes d'études intéressant tous ceux scientifiques, techniciens, historiens, économistes, juristes concernés par une industrie très représentative de notre monde en devenir, un monde où la place de l'aluminium dépendra de son aptitude à satisfaire les critères du développement supportable. ABSTRACT Owing to recycling, the aluminium industry's global energetic and environmental prints are much lower than its ore extractive metallurgy's ones. Likewise, recycling will allow the complete use of the expected avalanche of old scraps, consequently to the dramatic explosion of aluminium consumption since the 50's. The recycling state is characterized by: i) raw materials split in two groups :one, the new scrap, internal and prompt, proportional to semi-finished and finished products quantities, exhibits a fairly good and regular quality. The other, the old scrap, proportional to the finished products arrivïng at their end-of--life, about 22 years later on an average, exhibits a variable quality depending on the collect mode. ii) a poor recycling rate, near by that of steel. The aluminium industry generates too much new internal scrap and doesn't collect all the availa~e old scrap. About 50% of it is not recycled (when steel is recycling about 70% of the old scrap flow). iii) recycling techniques, all based on melting, are well handled in spite of aluminium atiiníty to oxygen and the practical impossibility to purify aluminium from any impurity. Sorting and first collect are critical issues before melting. iv) products and markets of recycled aluminium :New scraps have still been recycled in the production lines from where there are coming (closed loop). Old scraps, mainly those mixed, have been first recycled in different production lines (open loop) :steel deoxidation products followed during the 30's, with the development of the foundry alloys, by foundry pieces of which the main market is the automotive industry. During the 80's, the commercial development of the beverage can in North America has permitted the first old scrap recycling closed loop which is developing. v) an economy with low and erratic margins because the electrolytic aluminium quotation fixes scrap purchasing price and recycled aluminium selling price. vi) an industrial organisation historically based on the scrap group and the loop mode. New scrap is recycled either by the transformation industry itself or by the recycling industry, the remelter, old scrap by the refiner, the other component of the recycling industry. The big companies, the "majors" are often involved in the closed loop recycling and very seldom in the open loop one. To-day, aluminium industry's global energetic and environmental prints are too unbeara~ e and the sustainaЫe development criteria are not fully met. Critical issues for the aluminium industry are to better produce, to better consume and to better recycle in order to become a real sustainaЫe development industry. Specific issues to recycling are a very efficient recycling industry, a "sustainaЫe development" economy, a complete old scrap collect favouring the closed loop. Also, indirectly connected to the recycling, are a very efficient transformation industry generating much less new scrap and a finished products industry delivering only products fulfilling sustainaЫe development criteria.

Effect of groundwater composition on arsenic detection by bacterial biosensors.

A luminescent bacterial biosensor was used to quantify bioavailable arsenic in artificial groundwater. Its light production above the background emission was proportional to the arsenite concentration in the toxicologically relevant range of 0 to 0.5 mu M. Effects of the inorganic solutes phosphate, Fe(II) and silicate on the biosensor signal were studied. Phosphate at a concentration of 0.25 g L-1 phosphate slightly stimulated the light emission, but much less than toxicologically relevant concentrations of the much stronger inducer arsenite. No effect of phosphate was oberved in the presence of arsenite. Freshly prepared sodium silicate solution at a concentration of 10 g L-1 Si reduced the arsenite-induced light production by roughly 37%, which can be explained by transient polymerization leading to sequestration of some arsenic. After three days of incubation, silicate did not have this effect anymore, probably because depolymerization occurred. In the presence of 0.4 g L-1 Fe(II), the arsenite-induced light emission was reduced by up to 90%, probably due to iron oxidation followed by arsenite adsorption on the less soluble Fe(III) possibly along with some oxidation to the stronger adsorbing As(V). Addition of 100 mu M EDTA was capable of releasing all arsenic from the precipitate and to transform it into the biologically measurable, dissolved state. The biosensor also proved valuable for monitoring the effectiveness of an arsenic removal procedure based on water filtration through a mixture of sand and iron granules.

Statistical treatment of grain-size curves and empirical distributions: densities as compositions?

The preceding two editions of CoDaWork included talks on the possible considerationof densities as infinite compositions: Egozcue and D´ıaz-Barrero (2003) extended theEuclidean structure of the simplex to a Hilbert space structure of the set of densitieswithin a bounded interval, and van den Boogaart (2005) generalized this to the setof densities bounded by an arbitrary reference density. From the many variations ofthe Hilbert structures available, we work with three cases. For bounded variables, abasis derived from Legendre polynomials is used. For variables with a lower bound, westandardize them with respect to an exponential distribution and express their densitiesas coordinates in a basis derived from Laguerre polynomials. Finally, for unboundedvariables, a normal distribution is used as reference, and coordinates are obtained withrespect to a Hermite-polynomials-based basis.To get the coordinates, several approaches can be considered. A numerical accuracyproblem occurs if one estimates the coordinates directly by using discretized scalarproducts. Thus we propose to use a weighted linear regression approach, where all k-order polynomials are used as predictand variables and weights are proportional to thereference density. Finally, for the case of 2-order Hermite polinomials (normal reference)and 1-order Laguerre polinomials (exponential), one can also derive the coordinatesfrom their relationships to the classical mean and variance.Apart of these theoretical issues, this contribution focuses on the application of thistheory to two main problems in sedimentary geology: the comparison of several grainsize distributions, and the comparison among different rocks of the empirical distribution of a property measured on a batch of individual grains from the same rock orsediment, like their composition

Activity of polymethylmethacrylate (PMMA) bone cement loaded with daptomycin, vancomycin and gentamicin against Staphylococcus epidermidis biofilms

Background: Local antibiotics may significantly improve the treatmentoutcome in bone infection without systemic toxicity. For impregnationof polymethylmethacrylate (PMMA), gentamicin, vancomycin and/orclindamycin are currently used. A new lipopeptid antibiotic,daptomycin, is a promising candidate for local treatment due to itsspectrum against staphylococci and enterococci (including multiresistantstrains), and concentration-dependent rapid bactericidalactivity. We investigated activity of antibiotic-loaded PMMA againstStaphylococcus epidermidis biofilms using an ultra-sensitive bacterialheat detection method (microcalorimetry).Methods: Staphylococcus epidermidis (strain RP62A, susceptibleto daptomycin, vancomycin and gentamicin) at concentration 106bacteria/ml was incubated with 2 g-PMMA block (Palacos, HeraeusMedical, Hanau, Germany) in 25 ml tryptic soy broth (TSB)supplemented with calcium. PMMA blocks were preloaded withdaptomycin, vancomycin and gentamicin each at 2 g/40 mg (= 100 mg/block) PMMA. After 72 h-incubation at 35 °C under static conditions,PMMA blocks were rinsed in phosphate-buffered solution (PBS) 5times and transferred in 4 ml-microcalorimetry ampoule filled with 1 mlTSB. Bacterial heat production, which is proportional to the quantityof biofilm on PMMA surface, was measured by isothermalmicrocalorimetry. The detection time was calculated as the time untilthe heat flow reached 20 microwatt.Results: Biomechanical properties did not differ between antibioticloadedand non-loaded PMMA blocks. The mean detection time (±standard deviation) of bacterial heat was 6.5 ± 0.4 h for PMMA withoutantibiotics (negative control), 13.5 ± 4.6 h for PMMA with daptomycin,14.0 ± 4.1 h for PMMA with vancomycin and 5.0 ± 0.4 h for PMMAwith gentamicin.Conclusion: Our data indicates that antibiotics at 2 g/40 mg PMMAdid not change the biomechanical properties of bone cement. Daptomycinand vancomycin were more active than gentamicin against S.epidermidis biofilms when all tested at 2 g/40 mg PMMA. In the nextstep, higher concentrations of daptomycin and their elution kineticneeds to be determined to optimize its antibiofilm activity before usingin the clinical setting.

Nutrición, fibrosis quística y aparato digestivo

The prevalence of hyponutrition in cystic fibrosis is high although it may vary according to the different studies. Detection of hyponutrition should be done by combining different methods, depending on their availability. However, the simplest and most validated criterion is to measure at each visit the weight (and height in children) in order to calculate the body mass index and categorizing hyponutrition according to absolute criteria: in adults < 18.5 kg/m(2), and in children as percentiles of the body mass index. Worsening of the nutritional status is directly related with the decrease in lung function parameters and it has been proposed as a morbidity (and even mortality) predictive factor in people with cystic fibrosis, independently of the level of pulmonary dysfunction. Exocrine pancreatic insufficiency is present is approximately 70-90% of the patients with cystic fibrosis and the genotype-phenotype correlation is high. Most of the patients with exocrine pancreatic insufficiency tolerate a high-fat diet provided that they are treated with pancreatic enzymes at appropriate doses. The prevalence of diabetes increases with age, reaching up 40% of the cases in patients older than 30 years. Clinical liver involvement is less prevalent (it approximately affects 1/3 of the patients). Other intestinal complications such as meconial ileus, gastroesophageal reflux, obstruction of the distal intestine, or fibrosing colon disease may also condition malnourishment. In patients with cystic fibrosis, a usual high-fat diet providing 120%-150% of the recommended calories is advised. If the nutritional goals are not achieved or maintained with diet modifications, artificial supplements may be added, although the recommendation for their use has not been endorsed by solid scientific evidences. The most frequently used preparations usually are polymeric or hypercaloric. The indications for enteral (through a tube, especially gastrostomy) or parenteral nutritional support are similar to those used in other pathologies. Dietary and nutritional control should be included in a multidisciplinary program allowing the improvement of the functional capacity and the quality of life and reducing, at least from a theoretical viewpoint, the morbimortality associated to malnourishment in these patients.

The stepwise selection for ketoconazole resistance induces upregulation of C14-demethylase (CYP51) in Leishmania amazonensis

Ketoconazole is a clinically safe antifungal agent that also inhibits the growth of Leishmania spp. A study was undertaken to determine whether Leishmania parasites are prone to becoming resistant to ketoconazole by upregulating C14-demethylase after stepwise pharmacological pressure. Leishmania amazonensis promastigotes [inhibitory concentration (IC)50 = 2 µM] were subjected to stepwise selection with ketoconazole and two resistant lines were obtained, La8 (IC50 = 8 µM) and La10 (IC50 = 10 µM). As a result, we found that the resistance level was directly proportional to the C14-demethylase mRNA expression level; we also observed that expression levels were six and 12 times higher in La8 and La10, respectively. This is the first demonstration that L. amazonensis can up-regulate C14-demethylase in response to drug pressure and this report contributes to the understanding of the mechanisms of parasite resistance.

Sr, C and O isotope systematics in the Pucara Basin, central Peru - Comparison between Mississippi Valley-type deposits and barren areas

A combined Sr, O and C isotope study has been carried out in the Pucara basin, central Peru, to compare local isotopic trends of the San Vicente and Shalipayco Zn-Pb Mississippi Valley-type (MVT) deposits with regional geochemical patterns of the sedimentary host basin. Gypsum, limestone and regional replacement dolomite yield Sr-87/Sr-86 ratios that fall within or slightly below the published range of seawater Sr-87/Sr-86 values for the Lower Jurassic and the Upper Triassic. Our data indicate that the Sr isotopic composition of seawater between the Hettangian and the Toarcian may extend to lower Sr-87/Sr-86 ratios than previously published values. An Sr-87-enrichment is noted in (1) carbonate rocks from the lowermost part of the Pucara basin, and (2) different carbonate generations at the MVT deposits. This indicates that host rocks at MVT deposits and in the lowermost part of the carbonate sequence interacted with Sr-87-enriched fluids. The fluids acquired their radiogenic nature by interaction with lithologies underlying the carbonate rocks of the Pucara basin. The San Ramon granite, similar Permo-Triassic intrusions and their elastic derivatives in the Mitu Group are likely sources of radiogenic Sr-87. The Brazilian shield and its erosion products are an additional potential source of radiogenic Sr-87. Volcanic rocks of the Mitu Group are not a significant source for radiogenic Sr-87; however, molasse-type sedimentary rocks and volcaniclastic rocks cannot be ruled out as a possible source of radiogenic Sr-87. The marked enrichment in Sr-87 of carbonates toward the lower part of the Pucara Group is accompanied by only a slight decrease in delta(18)O values and essentially no change in delta(13)C values, whereas replacement dolomite and sparry carbonates at the MVT deposits display a coherent trend of progressive Sr-87-enrichment, and O-18- and C-13-depletion. The depletion in O-18 in carbonates from the MVT deposits are likely related to a temperature increase, possibly coupled with a O-18-enrichment of the ore-forming fluids. Progressively lower delta(13)C values throughout the paragenetic sequence at the MVT deposits are interpreted as a gradually more important contribution from organically derived carbon. Quantitative calculations show that a single fluid-rock interaction model satisfactorily reproduces the marked Sr-87-enrichment and the slight decrease in delta(18)O values in carbonate rocks from the lower part of the Pucara Group. By contrast, the isotopic covariation trends of the MVT deposits are better reproduced by a model combining fluid mixing and fluid-rock interaction. The modelled ore-bearing fluids have a range of compositions between a hot, saline, radiogenic brine that had interacted with lithologies underlying the Pucara sequence and cooler, dilute brines possibly representing local fluids within the Pucara sequence. The composition of the local fluids varies according to the nature of the lithologies present in the neighborhood of the different MVT deposits. The proportion of the radiogenic fluid in the modelled fluid mixtures interacting with the carbonate host rocks at the MVT deposits decreases as one moves up in the stratigraphic sequence of the Pucara Group.

Economic and environmental effects of the CO2 taxation: an input-output analysis for Spain

CO2 emissions induced by human activities are the major cause of climate change; hence, strong environmental policy that limits the growing dependence on fossil fuel is indispensable. Tradable permits and environmental taxes are the usual tools used in CO2 reduction strategies. Such economic tools provide incentives to polluting industries to reduce their emissions through market signals. The aim of this work is to investigate the direct and indirect effects of an environmental tax on Spanish products and services. We apply an environmentally extended input-output (EIO) model to identify CO2 emission intensities of products and services and, accordingly, we estimate the tax proportional to these intensities. The short-term price effects are analyzed using an input-output price model. The effect of tax introduction on consumption prices and its influence on consumers’ welfare are determined. We also quantify the environmental impacts of such taxation in terms of the reduction in CO2 emissions. The results, based on the Spanish economy for the year 2007, show that sectors with relatively poor environmental profile are subjected to high environmental tax rates. And consequently, applying a CO2 tax on these sectors, increases production prices and induces a slight increase in consumer price index and a decrease in private welfare. The revenue from the tax could be used to counter balance the negative effects on social welfare and also to stimulate the increase of renewable energy shares in the most impacting sectors. Finally, our analysis highlights that the environmental and economic goals cannot be met at the same time with the environmental taxation and this shows the necessity of finding other (complementary or alternative) measures to ensure both the economic and ecological efficiencies. Keywords: CO2 emissions; environmental tax; input-output model, effects of environmental taxation.

Evaluación del estado nutricional en pacientes trasplantados renales durante 5 años de seguimiento.

INTRODUCTION: Weight gain and malnutrition after kidney transplantation is common and the resulting overweight and obesity is associated with serious health complications. By contrast, the prevalence of malnutrition in patients with renal transplantation and its impact on the outcome of kidney transplantation is underestimated. OBJECTIVES: The aim of this study was to evaluate the nutritional status of renal transplant patients and determine if the five-year follow-up, these patients undergo alterations that suggest nutritional deterioration. METHODS: The sample consisted of 119 renal transplant patients who attended for five years post-transplant consultation. All patients measurements of total cholesterol, low density lipoprotein (LDL), high density lipoprotein (HDL), triglycerides and ferritin (Ft) were performed. and anthropometric measurements were made of weight, height and BMI. Patients were divided into three groups according to GFR Group 1: <60 mL/min, Group 2: 89-60 mL/min Group 3: ≥ 90 mL/min. RESULTS: The weight and BMI tended to decrease in group 3 while increasing in the other groups. A decrease in total cholesterol, HDL, LDL, Triglycerides and Ferritin less pronounced in group 3 occurs. CONCLUSIONS: After five years you can see a significant reduction in nutritional biochemical parameters in general, likewise the nutritional status is closely related, and is directly proportional to the function of the graft.

Mg/Ca and Sr/Ca ratios of ostracod valves from living species of Lake Geneva

The Mg/Ca and Sr/Ca ratios of living ostracods belonging to 15 different species and sampled monthly over a one year-cycle at five sites (2, 5, 13, 33, and 70 m water depths) in western Lake Geneva (Switzerland) are compared to the oxygen and carbon isotope compositions measured on the same samples as well as to the temperature and chemical composition of the water (δ18OH2O, δ13CDIC, Mg/CaH2O, and Sr/CaH2O) at the time of ostracod calcification. The results indicate that trace element incorporation varied at the species level, mainly because of the ecological and biological differences between the different species (life-cycle, (micro-)habitat preference, biomineralisation processes) and the control thereof on trace element incorporation of the ostracods. In littoral zones, the Mg/Ca and Sr/Ca of ostracod valves increase as temperature and Mg/Ca and Sr/Ca of water increase during spring and summer, hence reflecting mainly seasonal variations. However, given that for Lake Geneva the Mg/Ca and Sr/Ca of water also vary with temperature, it is not possible to distinguish the effects of temperature from those of changes in chemical composition of water on the trace element content in ostracod valves. Results support that both water temperature and water Mg/Ca and Sr/Ca ratios control the final trace element content of Cyprididae valves. In contrast, the trace element content of species living in deeper zones of the basin is influenced by variations in the chemical composition of the pore water for the infaunal species. Trace element content measured for these specimens cannot, therefore, be used to reconstruct the compositions of the water lake bottom. In addition, incorporation of Mg and Sr into the shell differs from one family, sub-family, or even species to the other. This suggests that the distinctive Mg and Sr partition coefcients for the analysed taxa result from different valve calcification strategies that may be phylogenetic.

Hypothermie thérapeutique en traumatologie crânienne grave [Therapeutic hypothermia for severe traumatic brain injury].

Therapeutic hypothermia (TH) is considered a standard of care in the post-resuscitation phase of cardiac arrest. In experimental models of traumatic brain injury (TBI), TH was found to have neuroprotective properties. However, TH failed to demonstrate beneficial effects on neurological outcome in patients with TBI. The absence of benefits of TH uniformly applied in TBI patients should not question the use of TH as a second-tier therapy to treat elevated intracranial pressure. The management of all the practical aspects of TH is a key factor to avoid side effects and to optimize the potential benefit of TH in the treatment of intracranial hypertension. Induction of TH can be achieved with external surface cooling or with intra-vascular devices. The therapeutic target should be set at a 35°C using brain temperature as reference, and should be maintained at least during 48 hours and ideally over the entire period of elevated intracranial pressure. The control of the rewarming phase is crucial to avoid temperature overshooting and should not exceed 1°C/day. Besides its use in the management of intracranial hypertension, therapeutic cooling is also essential to treat hyperthermia in brain-injured patients. In this review, we will discuss the benefit-risk balance and practical aspects of therapeutic temperature management in TBI patients.