Distribution, Abundance and Molecular Analysis of Genus Barbadocladius Cranston & Krosch (Diptera, Chironomidae) in Tropical, High Altitude Andean Streams and Rivers

The distribution of the genus Barbadocladius Cranston & Krosch (Diptera: Chironomidae), previously reported from Chile to Bolivia, has extended northwards. Larvae, pupae and pupal exuviae of this genus have been found in the high mountain tropical streams of Peru to 9°22′56″, but are restricted to very high altitude streams (altitudes over 3,278 m asl) compared to the lower altitude streams (below 1,100 m asl) in which the genus is reported in Chile and Argentina. Based on morphological studies, both described species in the genus, Barbadocladius andinus Cranston & Krosch and Barbadocladius limay Cranston & Krosch, have been found in Peru as pupae or pupal exuviae. Morphological analysis of the larvae and pupae revealed no differences between the two described species from Patagonia and Peru, which are of similar size and with a similar armament of hooklets and spines in pupal tergites and sternites. However, molecular analysis of larvae and pupae revealed that in Peru, there are at least two different evolutionary lines, one distributed widely and another restricted to one site. Phylogenetic analysis (using cox1 mitochondrial sequences) of all available sequences of Barbadocladius shows that the Chilean and Argentinean material differs from that of Peru. Therefore, a total of four molecular segregates are identified, although morphologically, neither larvae nor the pupae may be differentiated.

Quantifying insufficient coping behavior under chronic stress. A cross-cultural study of 1,303 students from Italy, Spain, and Argentina.

The question of how to quantify insufficient coping behavior under chronic stress is of major clinical relevance. In fact, chronic stress increasingly dominates modern work conditions and can affect nearly every system of the human body, as suggested by physical, cognitive, affective and behavioral symptoms. Since freshmen students experience constantly high levels of stress due to tight schedules and frequent examinations, we carried out a 3-center study of 1,303 students from Italy, Spain and Argentina in order to develop socioculturally independent means for quantifying coping behavior. The data analysis relied on 2 self-report questionnaires: the Coping Strategies Inventory (COPE) for the assessment of coping behavior and the Zurich Health Questionnaire which assesses consumption behavior and general health dimensions. A neural network approach was used to determine the structural properties inherent in the COPE instrument. Our analyses revealed 2 highly stable, socioculturally independent scales that reflected basic coping behavior in terms of the personality traits activity-passivity and defeatism-resilience. This replicated previous results based on Swiss and US-American data. The percentage of students exhibiting insufficient coping behavior was very similar across the study sites (11.5-18.0%). Given their stability and validity, the newly developed scales enable the quantification of basic coping behavior in a cost-efficient and reliable way, thus clearing the way for the early detection of subjects with insufficient coping skills under chronic stress who may be at risk of physical or mental health problems.

RNA enrichment method for quantitative transcriptional analysis of pathogens in vivo applied to the fungus Candida albicans.

UNLABELLED: In vivo transcriptional analyses of microbial pathogens are often hampered by low proportions of pathogen biomass in host organs, hindering the coverage of full pathogen transcriptome. We aimed to address the transcriptome profiles of Candida albicans, the most prevalent fungal pathogen in systemically infected immunocompromised patients, during systemic infection in different hosts. We developed a strategy for high-resolution quantitative analysis of the C. albicans transcriptome directly from early and late stages of systemic infection in two different host models, mouse and the insect Galleria mellonella. Our results show that transcriptome sequencing (RNA-seq) libraries were enriched for fungal transcripts up to 1,600-fold using biotinylated bait probes to capture C. albicans sequences. This enrichment biased the read counts of only ~3% of the genes, which can be identified and removed based on a priori criteria. This allowed an unprecedented resolution of C. albicans transcriptome in vivo, with detection of over 86% of its genes. The transcriptional response of the fungus was surprisingly similar during infection of the two hosts and at the two time points, although some host- and time point-specific genes could be identified. Genes that were highly induced during infection were involved, for instance, in stress response, adhesion, iron acquisition, and biofilm formation. Of the in vivo-regulated genes, 10% are still of unknown function, and their future study will be of great interest. The fungal RNA enrichment procedure used here will help a better characterization of the C. albicans response in infected hosts and may be applied to other microbial pathogens. IMPORTANCE: Understanding the mechanisms utilized by pathogens to infect and cause disease in their hosts is crucial for rational drug development. Transcriptomic studies may help investigations of these mechanisms by determining which genes are expressed specifically during infection. This task has been difficult so far, since the proportion of microbial biomass in infected tissues is often extremely low, thus limiting the depth of sequencing and comprehensive transcriptome analysis. Here, we adapted a technology to capture and enrich C. albicans RNA, which was next used for deep RNA sequencing directly from infected tissues from two different host organisms. The high-resolution transcriptome revealed a large number of genes that were so far unknown to participate in infection, which will likely constitute a focus of study in the future. More importantly, this method may be adapted to perform transcript profiling of any other microbes during host infection or colonization.

The activity of the anti-apoptotic fragment generated by the caspase-3/p120 RasGAP stress-sensing module displays strict Akt isoform specificity.

The caspase-3/p120 RasGAP module acts as a stress sensor that promotes pro-survival or pro-death signaling depending on the intensity and the duration of the stressful stimuli. Partial cleavage of p120 RasGAP generates a fragment, called fragment N, which protects stressed cells by activating Akt signaling. Akt family members regulate many cellular processes including proliferation, inhibition of apoptosis and metabolism. These cellular processes are regulated by three distinct Akt isoforms: Akt1, Akt2 and Akt3. However, which of these isoforms are required for fragment N mediated protection have not been defined. In this study, we investigated the individual contribution of each isoform in fragment N-mediated cell protection against Fas ligand induced cell death. To this end, DLD1 and HCT116 isogenic cell lines lacking specific Akt isoforms were used. It was found that fragment N could activate Akt1 and Akt2 but that only the former could mediate the protective activity of the RasGAP-derived fragment. Even overexpression of Akt2 or Akt3 could not rescue the inability of fragment N to protect cells lacking Akt1. These results demonstrate a strict Akt isoform requirement for the anti-apoptotic activity of fragment N.

Assessment of meshing techniques for fatigue analysis of load carrying welded joints using the effective notch approach

The effective notch stress approach for the fatigue strength assessment of welded structures as included in the Fatigue Design Recommendation of the IIW requires the numerical analysis of the elastic notch stress in the weld toe and weld root which is fictitiously rounded with a radius of 1mm. The goal of this thesis work was to consider alternate meshing strategies when using the effective notch stress approach to assess the fatigue strength of load carrying partial penetration fillet-welded cruciform joints. In order to establish guidelines for modeling the joint and evaluating the results, various two-dimensional (2D) finite element analyses were carried out by systematically varying the thickness of the plates, the weld throat thickness, the degree of bending, and the shape and location of the modeled effective notch. To extend the scope of this work, studies were also carried out on the influence of

Braving the Storm: How Are Global Biofuel Policies Sustained Despite Being Contested? An Analysis of the Biofuel Discourses of the EU, Brazil and Mozambique

Considered as a remedy to multiple problems that our world is facing, biofuels are nowadays promoted on a global scale. Despite this globalised approach, however, biofuels are heavily contested. Not only the social implications of biofuels are disputed and uncertain, particularly in countries of the global South, but also their environmental and economic rationales. Given these huge controversies, policies promoting biofuels would seem difficult to maintain. Yet, support for them has been surprisingly well established on the political agendas. With the aim of understanding this puzzle, this study asks how the dominant approach to biofuels has been sustained on a global level. In order to answer this question, the meanings and assumptions in biofuel discourses are explored through the lens of Maarten Hajer’s “argumentative” discourse analysis. Based on the existence of a “partnership for sustainable bioenergy” between the EU, Brazil and Mozambique, the study takes these three locations as case studies. The analysis reveals that various discursive strategies, including a particular problem construction and the use of two main story-lines, have played an important role in ensuring the permanence of the global approach to biofuels. Moreover, while the discourse of critics against biofuels demonstrates that there is room for contestation, the analysis finds that the opponents’ discourse largely fails to target the most salient justification for biofuels. A more effective strategy for critics would therefore be to also question the problem constructions underpinning this main justification in the global discourse.

Forward Looking Banking Stress in EMU Countries

Based on contingent claims analysis, CCA, this paper tries to estimate the systemic risk build-up in the European Economic and Monetary Union, EMU countries using a market based measure distance-to-default, DtD. It analyzes the individual and aggregated series for a comprehensive set of banks in each eurozone country over the period 2004-Q4 to 2013-Q2. Given the structural differences in financial sector and banking regulations at national level, the indices provide a useful indicator for monitoring country specific banking vulnerability and stress. We find that average DtD indicators are intuitive, forward-looking and timely risk indicators. The underlying trend, fluctuations and correlations among indices help us analyze the interdependence while cross-sectional differences in DtD prior to crisis suggest banking sector fragility in peripheral EMU countries.

Comparison of differential gene expression to water stress among bacteria with relevant pollutant-degradation properties.

Resistance to semi-dry environments has been considered a crucial trait for superior growth and survival of strains used for bioaugmentation in contaminated soils. In order to compare water stress programmes, we analyse differential gene expression among three phylogenetically different strains capable of aromatic compound degradation: Arthrobacter chlorophenolicus A6, Sphingomonas wittichii RW1 and Pseudomonas veronii 1YdBTEX2. Standardized laboratory-induced water stress was imposed by shock exposure of liquid cultures to water potential decrease, induced either by addition of solutes (NaCl, solute stress) or by addition of polyethylene glycol (matric stress), both at absolute similar stress magnitudes and at those causing approximately similar decrease of growth rates. Genome-wide differential gene expression was recorded by micro-array hybridizations. Growth of P. veronii 1YdBTEX2 was the most sensitive to water potential decrease, followed by S. wittichii RW1 and A. chlorophenolicus A6. The number of genes differentially expressed under decreasing water potential was lowest for A. chlorophenolicus A6, increasing with increasing magnitude of the stress, followed by S. wittichii RW1 and P. veronii 1YdBTEX2. Gene inspection and gene ontology analysis under stress conditions causing similar growth rate reduction indicated that common reactions among the three strains included diminished expression of flagellar motility and increased expression of compatible solutes (which were strain-specific). Furthermore, a set of common genes with ill-defined function was found between all strains, including ABC transporters and aldehyde dehydrogenases, which may constitute a core conserved response to water stress. The data further suggest that stronger reduction of growth rate of P. veronii 1YdBTEX2 under water stress may be an indirect result of the response demanding heavy NADPH investment, rather than the presence or absence of a suitable stress defence mechanism per se.

The role of raptor in cell death

Selon les statistiques, les maladies cancéreuses sont en augmentation dans les pays en développement ainsi que dans les pays industrialisés. Ceci peut s'expliquer largement par les habitudes alimentaires, le tabagisme, les infections, le manque d'activité physique, la pollution et le stress, entre autres. Ainsi, l'Organisation Mondiale de la Santé (OMS) prévoit une augmentation de la fréquence des cancers avec 15 millions de nouveaux cas par an en 2020. La transformation d'une cellule normale en une cellule cancéreuse se déroule en plusieurs étapes avec, au niveau moléculaire, différentes mutations ciblant des protéines régulant la croissance cellulaire. Un des exemples de protéines qui participent au contrôle des voies cellulaires impliquées lors de la prolifération des cellules sont les complexes de protéines mTORCl et mTORC2 (« mammalian target of rapamycin complex 1 and 2 »). Ces complexes mTORCl et mTORC2 activent des processus anaboliques (la synthèse de protéines et de lipides, le métabolisme énergétique, entre autres) et inhibent en même temps des voies de catabolismes cellulaires (autophagie et synthèse de lysosomes). Ils sont souvent mutés dans de nombreux cas de cancers, c'est pourquoi ils sont la cible de nombreux traitements anti-cancéreux. Pour ces raisons, nous nous sommes intéressés aux mécanismes d'actions moléculaires des drogues qui ciblent les complexes mTORCl et mTORC2. Nous avons ainsi découvert qu'une molécule présente uniquement dans le complexe mTORCl, raptor, était clivée en un fragment plus petit lors du traitement de cellules cancéreuses avec des drogues. Des molécules activées durant la mort cellulaire programmée par apoptose, les caspases, se sont révélées responsables du clivage de raptor. Nous avons ensuite décrit de façon précise les sites de clivage de raptor par les caspases durant la mort cellulaire. Il s'est avéré que le clivage de raptor affaiblissait son interaction avec mTOR au sein du complexe mTORCl, ce qui participe à l'inactivation de mTORCl lors de traitements avec des molécules anti-cancéreuses. Ces résultats nous ont permis de mieux comprendre les mécanismes d'actions de différentes drogues anti-cancéreuses au niveau du complexe mTORCl, ce qui peut être utile pour la synthèse de nouvelles molécules ciblant mTORCl ainsi que pour lutter contre les mécanismes de résistance chimiothérapeutiques. -- La protéine « mammalian target of rapamycin » (mTOR) est une sérine/thréonine kinase qui est hautement conservée des protistes à l'être humain. Deux complexes mTOR existent : le complexe 1 mTOR (mTORCl) et le complexe 2 mTOR (mTORC2). Ils régulent positivement des processus anaboliques (synthèse de protéines et de lipides, le métabolisme énergétique, l'organisation du cytosquelette, la survie cellulaire) et négativement des voies cataboliques (autophagic, biogenèse de lysosomes). Les complexes mTORCl et mTORC2 sont sensibles aux signaux mitogéniques tels que les acides aminés, le glucose, les facteurs de croissance, l'état énergétique (ATP) et les niveaux d'oxygène et induisent des voies de croissance cellulaire essentielles. La voie cellulaire regulée par mTORCl peut être hyperactivée dans de nombreux cancers humains. Puisque plusieurs voies cellulaires convergent et régulent les complexes mTORCl et mTORC2, des mutations dans les kinases en amont peuvent mener à une dérégulation de l'activation de mTOR. Des stratégies thérapeutiques ont été développées pour cibler les complexes mTORCl et mTORC2, ainsi que les kinases en amont qui régulent mTOR. Plusieurs drogues ciblant mTORCl, telles que la rapamycine et la curcumine, affectent l'interaction entre mTOR et un composant spécifique de mTORCl, raptor. Dans cette étude, nous nous sommes intéressés aux mécanismes moléculaires des drogues qui ciblent mTORCl, ainsi que leur effet déstabilisant sur l'interaction entre mTOR et raptor dans des lignées cellulaires de lymphomes. Nous avons démontré que raptor était clivé en un fragment de lOOkDa après traitement avec la rapamycine, la curcumine, l'étoposide, la cisplatine, la staurosporine et le ligand Fas (FasL). Etant donné que ces drogues ont été décrites comme induisant I'apoptose, l'utilisation d'un inhibiteur de caspases (z- VAD-fmk) a révélé que le clivage de raptor, lors de la mort cellulaire, était dépendant des caspases. Des essais caspases in vitro ont permis d'identifier la caspase-6 (ainsi que probablement d'autres caspases) comme étant une protéase impliquée dans le clivage de raptor. La séquence protéique de raptor a montré potentiellement plusieurs sites de clivage de caspases aux extrémités amino-terminale et carboxy-terminale. La mutagénèse a permis d'identifier les sites de clivages de raptor par les caspases comme étant DEAD LTD (acides aminés 17-23) et DDADD (acides aminés 939¬943). De plus, le clivage de raptor corrèle avec l'inhibition de l'activité de mTORCl envers ces substrats (S6K et 4E-BP1). Nous avons aussi observé que le clivage de raptor affaiblissait l'interaction entre mTOR et raptor, ce qui indique que ce clivage est une étape critique dans l'inhibition de mTORCl durant I'apoptose. Pour terminer, la mutagénèse du site de clivage de raptor DDADD a montré une résistance à la mort cellulaire de cellules cancéreuses. Notre travail de recherche a révélé un nouveau mécanisme moléculaire qui module l'organisation et l'activité de mTORCl, ce qui peut être d'un grand intérêt pour les recherches dans le domaine de mTOR ainsi que pour la découverte de molécules ciblant mTORCl. -- The mammalian target of rapamycin (mTOR) is a serine/threonine protein kinase, which is highly conserved from yeast to humans. Two different mTOR complexes exist: the mTOR complex 1 (mTORCl) and the mTOR complex 2 (mTORC2). They positively regulate anabolic processes (protein and lipid synthesis, energy metabolism, cytoskeleton organization, cell survival) and negatively regulate catabolic pathways (autophagy, lysosome biogenesis). The mTORCl and mTORC2 respond to mitogenic stimuli such as amino acids, glucose, growth factors, energy levels (ATP) and oxygen levels and drive essential cellular growth pathways. The mTORCl pathway can be found hyperactivated in numerous human cancers. As various cellular pathways converge and regulate mTORCl and mTORC2, mutations in upstream protein kinases can lead to a deregulated mTOR activation. Different therapeutic strategies have been developped to target mTORCl, mTORC2, as well as upstream protein kinases regulating mTOR pathways. Various drugs targeting mTORCl, such as rapamycin and curcumin, affect the interaction between mTOR and a specific mTORCl component, raptor. In this study, we investigated the molecular mechanisms of drugs targeting mTORCl, as well as their destabilizing effect on the mTOR-raptor interaction in lymphoma cell lines. We demonstrated that raptor was processed into a lOOkDa fragment after treatment with rapamycin, curcumin, etoposide, cisplatin, staurosporine and FasL. As these drugs were reported to induce apoptosis, the use of a pan-caspase inhibitor (z-VAD-fmk) revealed that the cleavage of raptor under cell death was caspase-dependent. In vitro caspase assays were performed to identify caspases-6 (and probably other caspases) as an important cysteine protease implicated in the cleavage of raptor. Analysis of raptor protein sequence showed several putative caspase-specific cleavage sites at the N-terminal and the C-terminal ends. Mutagenesis studies allowed us to identify the DEADLTD (amino acids 17-23) and the DDADD (amino acids 939-943) as the caspase-dependent cleavage residues of raptor. Furthermore, the cleavage of raptor correlated with inhibition of mTORCl activity towards its specific targets (4E-BP1 and S6K). We also highlighted that raptor processing weakened the interaction between mTOR and raptor, indicating that raptor cleavage is a critical step in the mTORCl inhibition process during apoptosis. Finally, mutagenesis of raptor C-terminal cleavage site (DDADD) conferred resistance to the chemotherapeutic-mediated cell death cascade of cancer cell. Our research work highlighted a new molecular mechanism modulating mTORCl organization and activity, which can be of great interest in the mTOR field research and for designing drugs trageting mTORCl.

Deposition and characterization of lines printed through laser-induced forward transfer

The possibility of printing two-dimensional micropatterns of biomolecule solutions is of great interest in many fields of research in biomedicine, from cell-growth and development studies to the investigation of the mechanisms of communication between cells. Although laser-induced forward transfer (LIFT) has been extensively used to print micrometric droplets of biological solutions, the fabrication of complex patterns depends on the feasibility of the technique to print micron-sized lines of aqueous solutions. In this study we investigate such a possibility through the analysis of the influence of droplet spacing of a water and glycerol solution on the morphology of the features printed by LIFT. We prove that it is indeed possible to print long and uniform continuous lines by controlling the overlap between adjacent droplets. We show how, depending on droplet spacing, several printed morphologies are generated, and we offer, in addition, a simple explanation of the observed behavior based on the jetting dynamics characteristic of the LIFT of liquids.

Rotational assessment of distal femur and its relevance in total knee arthroplasty: analysis by magnetic resonance imaging

AbstractObjective:To define the distal femur rotation pattern in a Brazilian population, correlating such pattern with the one suggested by the arthroplasty instruments, and analyzing the variability of each anatomic parameter.Materials and Methods:A series of 101 magnetic resonance imaging studies were evaluated in the period between April and June 2012. The epidemiological data collection was performed with the aid of the institution's computed imaging system, and the sample included 52 male and 49 female patients. The measurements were made in the axial plane, with subsequent correlation and triangulation with the other plans. The posterior condylar line was used as a reference for angle measurements. Subsequently, the anatomical and surgical transepicondylar axes and the anteroposterior trochlear line were specified. The angles between the reference line and the studied lines were calculated with the aid of the institution's software.Results:The mean angle between the anatomical transepicondylar axis and the posterior condylar line was found to be 6.89°, ranging from 0.25° to 12°. For the surgical transepicondylar axis, the mean value was 2.89°, ranging from –2.23° (internal rotation) to 7.86°, and for the axis perpendicular to the anteroposterior trochlear line, the mean value was 4.77°, ranging from –2.09° to 12.2°.Conclusion:The anatomical transepicondylar angle showed mean values corresponding to the measurement observed in the Caucasian population. The utilized instruments are appropriate, but no anatomical parameter proved to be steady enough to be used in isolation.

Paranoia and post-traumatic stress disorder in the months after a physical assault: a longitudinal study examining shared and differential predictors.

Background: Being physically assaulted is known to increase the risk of the occurrence of post-traumatic stress disorder (PTSD) symptoms but it may also skew judgements about the intentions of other people. The objectives of the study were to assess paranoia and PTSD after an assault and to test whether theory-derived cognitive factors predicted the persistence of these problems. Method: At 4 weeks after hospital attendance due to an assault, 106 people were assessed on multiple symptom measures (including virtual reality) and cognitive factors from models of paranoia and PTSD. The symptom measures were repeated 3 and 6 months later. Results: Factor analysis indicated that paranoia and PTSD were distinct experiences, though positively correlated. At 4 weeks, 33% of participants met diagnostic criteria for PTSD, falling to 16% at follow-up. Of the group at the first assessment, 80% reported that since the assault they were excessively fearful of other people, which over time fell to 66%. Almost all the cognitive factors (including information-processing style during the trauma, mental defeat, qualities of unwanted memories, self-blame, negative thoughts about self, worry, safety behaviours, anomalous internal experiences and cognitive inflexibility) predicted later paranoia and PTSD, but there was little evidence of differential prediction. Conclusions: Paranoia after an assault may be common and distinguishable from PTSD but predicted by a strikingly similar range of factors.

Non-Linear Journal Bearing Model for Analysis of Superharmonic Vibrations of Rotor Systems

A rotating machine usually consists of a rotor and bearings that supports it. The nonidealities in these components may excite vibration of the rotating system. The uncontrolled vibrations may lead to excessive wearing of the components of the rotating machine or reduce the process quality. Vibrations may be harmful even when amplitudes are seemingly low, as is usually the case in superharmonic vibration that takes place below the first critical speed of the rotating machine. Superharmonic vibration is excited when the rotational velocity of the machine is a fraction of the natural frequency of the system. In such a situation, a part of the machine’s rotational energy is transformed into vibration energy. The amount of vibration energy should be minimised in the design of rotating machines. The superharmonic vibration phenomena can be studied by analysing the coupled rotor-bearing system employing a multibody simulation approach. This research is focused on the modelling of hydrodynamic journal bearings and rotorbearing systems supported by journal bearings. In particular, the non-idealities affecting the rotor-bearing system and their effect on the superharmonic vibration of the rotating system are analysed. A comparison of computationally efficient journal bearing models is carried out in order to validate one model for further development. The selected bearing model is improved in order to take the waviness of the shaft journal into account. The improved model is implemented and analyzed in a multibody simulation code. A rotor-bearing system that consists of a flexible tube roll, two journal bearings and a supporting structure is analysed employing the multibody simulation technique. The modelled non-idealities are the shell thickness variation in the tube roll and the waviness of the shaft journal in the bearing assembly. Both modelled non-idealities may cause subharmonic resonance in the system. In multibody simulation, the coupled effect of the non-idealities can be captured in the analysis. Additionally one non-ideality is presented that does not excite the vibrations itself but affects the response of the rotorbearing system, namely the waviness of the bearing bushing which is the non-rotating part of the bearing system. The modelled system is verified with measurements performed on a test rig. In the measurements the waviness of bearing bushing was not measured and therefore it’s affect on the response was not verified. In conclusion, the selected modelling approach is an appropriate method when analysing the response of the rotor-bearing system. When comparing the simulated results to the measured ones, the overall agreement between the results is concluded to be good.

A correlation sensitivity analysis of non-life underwriting risk in solvency capital requirement estimation

This paper analyses the impact of using different correlation assumptions between lines of business when estimating the risk-based capital reserve, the Solvency Capital Requirement -SCR-, under Solvency II regulations. A case study is presented and the SCR is calculated according to the Standard Model approach. Alternatively, the requirement is then calculated using an Internal Model based on a Monte Carlo simulation of the net underwriting result at a one-year horizon, with copulas being used to model the dependence between lines of business. To address the impact of these model assumptions on the SCR we conduct a sensitivity analysis. We examine changes in the correlation matrix between lines of business and address the choice of copulas. Drawing on aggregate historical data from the Spanish non-life insurance market between 2000 and 2009, we conclude that modifications of the correlation and dependence assumptions have a significant impact on SCR estimation.

Multidrug resistance protein 1 localization in lipid raft domains and prostasomes in prostate cancer cell lines

Background: One of the problems in prostate cancer (CaP) treatment is the appearance of the multidrug resistance phenotype, in which ATP-binding cassette transporters such as multidrug resistance protein 1 (MRP1) play a role. Different localizations of the transporter have been reported, some of them related to the chemoresistant phenotype. Aim: This study aimed to compare the localization of MRP1 in three prostate cell lines (normal, androgen-sensitive, and androgen-independent) in order to understand its possible role in CaP chemoresistance. Methods: MRP1 and caveolae protein markers were detected using confocal microscopy, performing colocalization techniques. Lipid raft isolation made it possible to detect these proteins by Western blot analysis. Caveolae and prostasomes were identified by electron microscopy. Results: We show that MRP1 is found in lipid raft fractions of tumor cells and that the number of caveolae increases with malignancy acquisition. MRP1 is found not only in the plasma membrane associated with lipid rafts but also in cytoplasmic accumulations colocalizing with the prostasome markers Caveolin-1 and CD59, suggesting that in CaP cells, MRP1 is localized in prostasomes. Conclusion: We hypothesize that the presence of MRP1 in prostasomes could serve as a reservoir of MRP1; thus, taking advantage of the release of their content, MRP1 could be translocated to the plasma membrane contributing to the chemoresistant phenotype. The presence of MRP1 in prostasomes could serve as a predictor of malignancy in CaP