Studies on transportation of fish. Pt. 1. Packaging of frozen fish in insulated containers

The paper deals with certain technological aspects of transportation of fish. Frozen fish packed in thermocole insulated plywood box (tea chests) and transported has been found to remain in good condition, for 3 to 4 days. Fish reaching the destination in a thawed state can be stored in crushed ice for a further period of 2-3 days. The effect of initial temperature of frozen fish on the storage life, the maximum storage period for different types of frozen fish packed in the insulated container and the changes in chemical and organoleptic qualities of different varieties of fish under condition of transport are also discussed.

Manipulation of chromosomes in fish: review of various techniques and their implications in aquaculture

Human ingenuity has made it possible to advent the chromosome manipulation techniques to produce individuals with differing genomic status in a number of fish using various causal agents such as physical shocks (temperature or hydrostatic pressure), chemical (endomitotics) and anesthetic treatments either to suppress the second meiotic division shortly after fertilization of eggs or to prevent the first mitotic division shortly prior to mitotic cleavage formation. This results in the induction of polyploidy (triploidy and tetraploidy), gynogenesis (both meiotic and mitotic leading to clonal lines) and androgenesis in fish population. The rationale for the induction of such ploidy in fish has been its potential for generating sterile individuals, rapidly inbred lines and masculinized fish, which could be of benefit to fish farming and aquaculture. In this paper, these are critically reviewed and the implication of recently developed chromosome manipulation techniques to various fin fishes is discussed.

TECHNIQUES FOR PRODUCING DEFECT-FREE SOI BY DUAL ELECTRON BEAM HEATING OF DEPOSITED POLYSILICON.

Advances in the dual electron-beam recrystallization technique arising from the fast scanning of a line beam parallel to the edges of narrow seeding windows are described. The resultant recrystallized layers are essentially defect-free, have good surface flatness, and cover large areas.

EXPERIMENTAL TECHNIQUES IN COMBUSTION USE OF IN-CYLINDER IONISATION FOR THE INVESTIGATION AND CONTROL OF SPARK IGNITION ENGINES.

Ions generated during combustion have been used in three ways to give qualitative combustion information. Langmuir type probes have been inserted into the combustion chamber opposite the spark plug location. The centre electrode of the sparking plug itself has been used to produce an ionisation signal from the slightly ionised gases remaining after the flame front has departed. The spark discharge at ignition time has been used as an anemometer.

SUB-BAND CODING TECHNIQUES FOR ROBUST 4. 8 TO 8 kb/s SPEECH CODERS.

This paper describes a speech coding technique that has been developed in order to provide a method of digitising speech at bit rates in the range 4. 8 to 8 kb/s, that is insensitive to the effects of acoustic background noise and bit errors on the digital link. The main aim has been to develop a coding scheme which provides speech quality and robustness against noise and errors that is similar to a 16000 b/s continuously variable slope delta (CVSD) coder, but which operates at half its data rate or less. A desirable aim was to keep the complexity of the coding scheme within the scope of what could reasonably be handled by current signal processing chips or by a single custom integrated circuit. Applications areas include mobile radio and small Satcomms terminals.

Comparison of different scheduling techniques for H-infinity controllers

Several approaches to designing schedule H-infinity control systems are compared. These include a controller switching approach and also parameter scheduling of an observer representation of the controller. They are illustrated by application to a Generic VSTOI. Aircraft Model (GVAM) supplied by The Royal Aerospace Establishment (RAE) at Bedford. The switched design has been tested on the simulator at RAE Bedford. The linear H-infinity designs make use of a loop-shaping followed by robust stabilisation to additive perturbations of a normalised coprime factorisation of the shaped plans. The different scheduling approaches are compared with respect to achieved robust stability levels. performance and complexity of implementation.

Techniques for the transport and maintenance of scleractinian coral

Several small scleractinian coral colonies were collected from a remote reef and transferred [to] the Louisiana Universities Marine Center (LUMCON) for in vitro reproductive and larval studies. The species used here were Porites astreoides and Diploria strigosa. Colony size was ~20 cm in diameter. Colonies were brought to the surface by liftbag and stored in modified ice coolers. They were transported from Freeport, TX to Cocodrie, LA by truck for nearly 15 hours where field conditions were simulated in waiting aquaria. This document describes the techniques and equipment that were used, how to outfit such aquaria, proper handling techniques for coral colonies, and several eventualities that the mariculturist should be prepared for in undertaking this endeavor. It will hopefully prevent many mistakes from being made.

Application of domain decomposition and transmission line modelling techniques to 2D, time-domain, finite element problems

In this paper a recently published finite element method, which combines domain decomposition with a novel technique for solving nonlinear magnetostatic finite element problems is described. It is then shown how the method can be extended to, and optimised for, the solution of time-domain problems. © 1999 IEEE.

The use of C-V techniques to investigate instability mechanisms in M-I-S structures

In the field of flat panel displays, the current leading technology is the Active Matrix liquid Crystal Display; this uses a-Si:H based thin film transistors (TFTs) as the switching element in each pixel. However, under gate bias a-Si:H TFTs suffer from instability, as is evidenced by a shift in the gate threshold voltage. The shift in the gate threshold voltage is generally measured from the gate transfer characteristics, after subjecting the TFT to prolonged gate bias. However, a major drawback of this measurement method is that it cannot distinguish whether the shift is caused by the change in the midgap states in the a-Si:H channel or by charge trapping in the gate insulator. In view of this, we have developed a capacitance-voltage (C-V) method to measure the shift in threshold voltage. We employ Metal-Insulator-Semiconductor (MIS) structures to investigate the threshold voltage shift as they are simpler to fabricate than TFTs. We have investigated a large of number Metal/a-Si:H/Si3N4/Si+n structures using our C-V technique. From, the C-V data for the MIS structures, we have found that the relationship between the thermal energy and threshold voltage shift is similar to that reported by Wehrspohn et. al in a-Si:H TFTs (J Appl. Phys, 144, 87, 2000). The a-Si:H and Si3N4 layers were grown using the radio-frequency plasma-enhanced chemical vapour deposition technique.

Analytical techniques for indentation of viscoelastic materials

Indentation of linearly viscoelastic materials is explored using elastic-viscoelastic correspondence analysis for both conical-pyramidal and spherical indentation. Boltzmann hereditary integrals are used to generate displacement-time solutions for loading at constant rate and creep following ramp loading. Experimental data for triangle- and trapezoidal-loading are examined for commercially-available polymers and compared with analytical solutions. Emphasis is given to the use of multiple experiments to test the fidelity and predictive capability of the obtained material creep function. Plastic deformation occurs in sharp indentation of glassy polymers and is found to complicate the viscoelastic analysis. A new method is proposed for estimating a material time-constant from peak displacement or hardness data obtained in pyramidal indentation tests performed at different loading rates.

A packaging technique for silicon MEMS strain sensors on steel

A packaging technique suited to applying MEMS strain sensors realized on a silicon chip to a steel flat surface is described. The method is based on adhesive bonding of the silicon chip rear surface on steel using two types of glue normally used for standard piezoresistive strain sensors (Mbond200/ 600), using direct wire bonding of the chip to a Printed Circuit Board, also fixed on steel. In order to protect the sensor from the external environment, and to improve the MEMS performance, the silicon chip is encapsulated with a metal cap hermetically sealed-off under vacuum condition with a vacuum adhesive in which the bonding wires are also protected from possible damage. In order to evaluate the mechanical coupling of the silicon chip with the bar and thestress transfer extent to the silicon surface, commercial strain sensors have been applied on the chip glued on a steel bar in alaboratory setup able to generate strain by inflection, yielding a stress transfer around 70% from steel to silicon. © 2008 IEEE.

Production of triploid African catfish, Clarias gariepinus (Burchell), using chromosome manipulation techniques

An experiment was conducted to induce triploidy in African catfish, Clarias gariepinus, using heat shock and cold shock techniques. Cold shock at a temperature of 0± 1°C and 5±1°C for a duration of 15, 30, 45 and 60 min and heat shock at a temperature of 40±0.5°C and 41 ±OS C for a duration of 1, 2 and 3 min was given to induce triploidy 5 min after fertilization. Maximum percentage of triploids (91.4%) were obtained in the heat shock at a temperature of 40±0SC for a duration of 1 min whereas cold shock at 0± 1 C for a duration of 60 min yielded 90% of triploids. Chromosome analysis revealed that diploids have 54 chromosomes and triploids have 81 chromosomes. The erythrocyte measurements of the minor axis and major axis were 1.17 times larger in treated fish than in controls. The growth studies showed that the growth rate was not significantly affected in triploids.

Development of artificial breeding techniques for long-whiskered catfish, Sperata aor and giant river catfish, Sperata seenghala of Bangladesh

Sperata aor and S. seenghala are the two important native catfishes of Bangladesh but commercial farming of these species is not possible due to lack of naturally collected or artificially produced seeds for stocking. Attempts were made to develop techniques for seed production by artificial breeding and nursery-rearing of fries of these catfishes. A total of 60 S. seenghala (750-1,500 g) and 10 S. aor (600-1,000 g) broods were collected from the Brahmaputra river-basin and floodplains in Mymensingh region four months prior to their breeding season. The collected brood fishes were reared in separate earthen ponds with supplementary feeds comprising of rice bran (40%), mustard oil cake (29%), fish meal (30%) and vitamin-premix (1 %). Three experiments were conducted to optimize the hormone dose. A total of nine S. seenghala females weighing from 750 to 1,500 g were given an initial and resolving dose of 12-20 and 16-24 mg PG/kg body weight, respectively. The males weighing from 650-950 g were administered a single dose of 18-26 mg PG/kg body weight at the time of the time of administering the resolving dose to the females. The females ovulated partially and the eggs were examined under a compound microscope, but most of them were found to be less ripe or damaged. Collection of milt by stripping the males was not successful. The testes were taken out and sperm were observed to be non-motile and less developed. In view of stimulating natural propagation of S. seenghala, artificial holes (nests) were constructed in the pond bottom. Each hole was 0.7 m in diameter and 0.3 m in depth. A total of 10 holes were made and then 10 pairs of S. seenghala breeders (800-1,200 g) were stocked in the pond. In mid February, 3,000 fry of S. seenghala with a mean length of 4.60 cm and weight of 0.36 g were collected by repeated netting followed by drying of the pond. The fry were then stocked in a nursery pond and fed with commercial feed (SABINCO starter-1). The average length and weight of the fingerlings were 9.01 cm and 3.95 g, respectively and the estimated survival was 60% after two months of rearing. S. aor did not respond to natural spawning. Further study is essential to develop techniques for their successful artificial and natural breeding.

Assessing seasonal precipitation trends in India using parametric and non-parametric statistical techniques

This paper provides an insight into the long-term trends of the four seasonal and annual precipitations in various climatological regions and sub-regions in India. The trends were useful to investigate whether Indian seasonal rainfall is changing in terms of magnitude or location-wise. Trends were assessed over the period of 1954-2003 using parametric ordinary least square fits and non-parametric Mann-Kendall technique. The trend significance was tested at the 95% confidence level. Apart from the trends for individual climatological regions in India and the average for the whole of India, trends were also specifically determined for the possible smaller geographical areas in order to understand how different the trends would be from the bigger spatial scales. The smaller geographical regions consist of the whole southwestern continental state of Kerala. It was shown that there are decreasing trends in the spring and monsoon rainfall and increasing trends in the autumn and winter rainfalls. These changes are not always homogeneous over various regions, even in the very short scales implying a careful regional analysis would be necessary for drawing conclusions regarding agro-ecological or other local projects requiring change in rainfall information. Furthermore, the differences between the trend magnitudes and directions from the two different methods are significantly small and fall well within the significance limit for all the cases investigated in Indian regions (except where noted). © 2010 Springer-Verlag.