ASIAN SOYBEAN RUST INTEGRATED MANAGEMENT POTENTIAL: DISEASE SEVERITY, PLANT DEVELOPMENT AND YIELD COMPONENTS, CULTIVAR MG/BR-46 (CONQUISTA)

Soybean rust caused by Phakopsora pachyrhizi Sydow & P. Sydow is one of the major diseases of the soybean crop. The aim of this study was to evaluate the effects of sowing dates, plant populations and reduced doses of fungicides on soybean rust severity and its effects on plant development and yield, cultivar MG/BR46 (Conquista). Field experiments were conducted in the 2009/2010 and 2010/2011 harvests, under natural rust infestation of soybean rust. As from the appearance of the first disease symptoms, also began the fungicide spraying and the disease severity assessments. To understand the nature and extent of the effects of different treatments, a multivariate analysis of factors was applied. For the majority of the agronomic characters and factors, one-third to two-thirds of their variability can be explained by changes in plant populations or by differences in the fungicide treatments, and the remainder, was explained by sowing date variations. The fungicide treatments and sowing dates are determinants in disease severity and its interference on crop productivity. The characters of plant growth are more dependent on plant population variations. Treatments with azoxystrobina + ciproconazol promoted smaller disease severities, reflecting in productivity increase. The plant populations can be reduced up to 160.000 plants ha(-1) without losses in the disease control and the soybean yield. In general, the earliest sowings provided increase in the plant development, although the rust control was less efficient.

PRODUCTIVITY OF CANE SUGAR: LINEAR AND SPATIAL VARIABILITY BETWEEN COMPONENTS AND TECHNOLOGICAL PRODUCTION

Nowadays, the culture of the sugarcane plays an important role regarding the Brazilian reality, especially in the aspect related to the alternative energy sources. In 2009, the municipality of Suzanapolis (SP), in the Brazilian Cerrado, an experiment was conducted with the culture of the sugarcane in a Red eutrophic, with the aim of selecting, using Pearson correlation coefficients, modeling, simple, linear and multiple regressions and spatial correlation, and also the best technological and productive components, to explain the variability of the productivity of the sugarcane. The geostatistical grid was installed in order to collect the data, with 120 sampling points, in an area of 14.53 ha. For the simple linear regressions, the plants population is the component of production that presents the best quadratic correlation with the productivity of the sugarcane, given by: PRO = -0.553**xPOP(2)+16.14*xPOP-15.77. However, for multiple linear regressions, the equation PRO = -21.11+4.92xPOP**+0.76xPUR** is the one that best presents in order to estimate that productivity. Spatially, the best correlation with yield of the sugarcane is also determined by the component of the production population of plants.

Involutions whose fixed set has three or four components: a small codimension phenomenon

Let T : M → M be a smooth involution on a closed smooth manifold and F = n j=0 F j the fixed point set of T, where F j denotes the union of those components of F having dimension j and thus n is the dimension of the component of F of largest dimension. In this paper we prove the following result, which characterizes a small codimension phenomenon: suppose that n ≥ 4 is even and F has one of the following forms: 1) F = F n ∪ F 3 ∪ F 2 ∪ {point}; 2) F = F n ∪ F 3 ∪ F 2 ; 3) F = F n ∪ F 3 ∪ {point}; or 4) F = F n ∪ F 3 . Also, suppose that the normal bundles of F n, F 3 and F 2 in M do not bound. If k denote the codimension of F n, then k ≤ 4. Further, we construct involutions showing that this bound is best possible in the cases 2) and 4), and in the cases 1) and 3) when n is of the form n = 4t, with t ≥ 1.

Key participants of the tumor microenvironment of the prostate: An approach of the structural dynamic of cellular elements and extracellular matrix components during epithelial-stromal transition

Cancer is a multistep process that begins with the transformation of normal epithelial cells and continues with tumor growth, stromal invasion and metastasis. The remodeling of the peritumoral environment is decisive for the onset of tumor invasiveness. This event is dependent on epithelial–stromal interactions, degradation of extracellular matrix components and reorganization of fibrillar components. Our research group has studied in a new proposed rodent model the participation of cellular and molecular components in the prostate microenvironment that contributes to cancer progression. Our group adopted the gerbil Meriones unguiculatus as an alternative experimental model for prostate cancer study. This model has presented significant responses to hormonal treatments and to development of spontaneous and induced neoplasias. The data obtained indicate reorganization of type I collagen fibers and reticular fibers, synthesis of new components such as tenascin and proteoglycans, degradation of basement membrane components and elastic fibers and increased expression of metalloproteinases. Fibroblasts that border the region, apparently participate in the stromal reaction. The roles of each of these events, as well as some signaling molecules, participants of neoplastic progression and factors that promote genetic reprogramming during epithelial–stromal transition are also discussed.

Morphology and adhesion on blood components in root surfaces treated by a piezoelectric ultrasonic: an in vitro study

The aim of this study was to evaluate the morphology and adhesion of blood components on root surfaces instrumented with piezoelectric ultrasonic Piezon Master Surgery. Methods 10 teeth were used in this study. The teeth had their proximal divided into four areas that received different treatments: Group 1: untreated control Group 2: scaling with manual instrument; Group 3: scaling with ultrasound; Group 4: Scaling with manual instruments and ultrasound. We obtained 20 samples, 10 of which were used to analyze the morphology and the other 10 were used for analysis of adhesion of blood components. The specimens were analyzed by scanning electron microscopy. Photomicrographs were analyzed by the scores of adhesion of blood components and the index of root morphology. The results were statistically by the Kruskall-Wallis and Mann-Whitney with a significance level of 95%. Results The morphological analysis showed that the Group 1 had a surface unchanged in relation to other groups (Group 1 X Group 2 = 0.0025; Group 1 X Group 3 = 0.0003; Group 1 X Group 4 = 0.0003) and Group 2 presented a smoother surface compared to Group 1 and groups instrumented with ultrasound (Group 2 X Group 3 = 0.0025; Group 2 X Group 4 = 0.0025) there were no statistical differences between the Groups 3 and 4. analysis of adhesion of blood components showed that the Groups 2, 3 and 4 had no statistically significant differences between themselves, but more biocompatible surfaces promoted the surface untreated control (Group 1 X Group 2 = 0.02; Group 1 X Group 3 = 0.04; Group 1 X Group 4 = 0.005). Conclusion The instrumentation with piezoelectric ultrasonic promoted an irregular root surface, but did not negatively affect the adhesion of blood components.

Dental and skeletal components of Class II open bite treatment with a modified Thurow appliance

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nicotine-enhanced oxidation of low-density lipoprotein and its components by myeloperoxidase/H2O2/Cl- system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Are metabolic syndrome and its components associated with 5-year mortality in chronic obstructive pupmonary disease patients?

The aim of this study was to evaluate the risk of mortality according to the presence of metabolic syndrome in chronic obstructive pulmonary disease (COPD) patients who were followed for 5 years. We did not establish the influence of metabolic syndrome on mortality rate. However, an increase of 100 mg of triglycerides was associated with a 39% increase in the probability of death in the period of the study (hazard ratio 1.39, 95% confidence interval 1.06-1.83).

Mechanical properties of components of the bonding interface in different regions of radicular dentin surfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of growth curve parameters of organs and body components in meat- (Coturnix coturnix coturnix) and laying-type (Coturnix coturnix japonica) quail show interactions between gender and genotype

The objective of this study was to estimate growth parameters of carcass components (wing, thighs and drumsticks, back and breast) and organs (heart, liver, gizzard and gut) in males and females of one meat-type quail strain (Coturnix coturnix coturnix) and two laying strains (Coturnix coturnix japonica) designated either yellow or red.A total of 1350 quail from 1 to 42d old were distributed in a completely randomised design, with 5 replicates of each strain. The carcass component weights and body organs were analysed weekly and evaluated using the Gompertz function; growth rates were evaluated through derivative equations.The meat-type strain presented the highest growth rates in carcass components and organs. Across strains, females showed the highest weight of internal organs at maturity compared to males.Females had greater growth potential in breast, wings and back than males for both yellow and red laying quail.

Involvement of major components from sporothrix schenckii cell wall in the caspase-1 activation, nitric oxide and cytokines production during experimental sporotrichosis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Expression of cellular components in granulomatous inflammatory response in piaractus mesopotamicus model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alterations of protein expression in conditions of copper-deprivation for Paracoccidioides lutzii in the presence of extracellular matrix components

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Deposition of bodily chemical components in the carcass of tilapia (oreochromis sp.) strains

The knowledge of how animals deposited chemical components as water, protein, fat and ash in the carcass is importance for the formulation of a balanced diet, allowing maximum performance with a low environmental impact. So, the study was carried out to evaluate the influence of different tilapia strains (Chitralada, Commercial, Red and Universidade Federal de Lavras [UFLA]) on the deposition of bodily chemical components in the carcass. The bodily components analyzed were water, protein, fat and ash. For the determination of the bodily chemical deposition curves by age, the exponential, Brody, logistic, Gompertz and von Bertalanffy models were adjusted. The Commercial and UFLA strains deposited water at a faster speed (P<0.05) compared with the remaining strains. As for protein, the Red strain had a lower estimated maturity weight (49.37 g), and was more precocious (202 days) with regard to maximum deposition in comparison to the other strains (Chitralada, UFLA and Commercial) in which there was an estimated maturity weight of 231.5 g and maximum depositionfor 337 days. There were no differences (P>0.05) for the logistic model parameter between Red, UFLA and Commercial strains for fat, which presented a maximum fat deposition (0.23 g) at 310 days of age. Regarding ash deposition, the Commercial strain presented a higher maximum deposition (0.10 g) at 337 days, occurring later than the other strains that presented maximum deposition (0.033g) at 254 days of age. Thus, it was concluded that the genetic strains evaluated differ in chemical deposition curves of water, protein, fat and ash.