Dynamic Analysis Model of Spherical Roller Bearings with Defects

Rolling element bearings are essential components of rotating machinery. The spherical roller bearing (SRB) is one variant seeing increasing use, because it is self-aligning and can support high loads. It is becoming increasingly important to understand how the SRB responds dynamically under a variety of conditions. This doctoral dissertation introduces a computationally efficient, three-degree-of-freedom, SRB model that was developed to predict the transient dynamic behaviors of a rotor-SRB system. In the model, bearing forces and deflections were calculated as a function of contact deformation and bearing geometry parameters according to nonlinear Hertzian contact theory. The results reveal how some of the more important parameters; such as diametral clearance, the number of rollers, and osculation number; influence ultimate bearing performance. Distributed defects, such as the waviness of the inner and outer ring, and localized defects, such as inner and outer ring defects, are taken into consideration in the proposed model. Simulation results were verified with results obtained by applying the formula for the spherical roller bearing radial deflection and the commercial bearing analysis software. Following model verification, a numerical simulation was carried out successfully for a full rotor-bearing system to demonstrate the application of this newly developed SRB model in a typical real world analysis. Accuracy of the model was verified by comparing measured to predicted behaviors for equivalent systems.

Medical applications of shape memory alloys

Shape memory alloys (SMA) are materials that have the ability to return to a former shape when subjected to an appropriate thermomechanical procedure. Pseudoelastic and shape memory effects are some of the behaviors presented by these alloys. The unique properties concerning these alloys have encouraged many investigators to look for applications of SMA in different fields of human knowledge. The purpose of this review article is to present a brief discussion of the thermomechanical behavior of SMA and to describe their most promising applications in the biomedical area. These include cardiovascular and orthopedic uses, and surgical instruments.

Simulation model of wind turbine gearbox and lubrication system

As increasing efficiency of a wind turbine gearbox, more power can be transferred from rotor blades to generator and less power is used to cause wear and heating in the gearbox. By using a simulation model, behavior of the gearbox can be studied before creating expensive prototypes. The objective of the thesis is to model a wind turbine gearbox and its lubrication system to study power losses and heat transfer inside the gearbox and to study the simulation methods of the used software. Software used to create the simulation model is Siemens LMS Imagine.Lab AMESim, which can be used to create one-dimensional mechatronic system simulation models from different fields of engineering. When combining components from different libraries it is possible to create a simulation model, which includes mechanical, thermal and hydraulic models of the gearbox. Results for mechanical, thermal, and hydraulic simulations are presented in the thesis. Due to the large scale of the wind turbine gearbox and the amount of power transmitted, power loss calculations from AMESim software are inaccurate and power losses are modelled as constant efficiency for each gear mesh. Starting values for simulation in thermal and hydraulic simulations were chosen from test measurements and from empirical study as compact and complex design of gearbox prevents accurate test measurements. In further studies to increase the accuracy of the simulation model, components used for power loss calculations needs to be modified and values for unknown variables are needed to be solved through accurate test measurements.

Dynamic Competitor Analysis Model Of Welding Quality Management Software

Tämä diplomityö arvioi hitsauksen laadunhallintaohjelmistomarkkinoiden kilpailijoita. Kilpailukenttä on uusi ja ei ole tarkkaa tietoa siitä minkälaisia kilpailijoita on markkinoilla. Hitsauksen laadunhallintaohjelmisto auttaa yrityksiä takaamaan korkean laadun. Ohjelmisto takaa korkean laadun varmistamalla, että hitsaaja on pätevä, hän noudattaa hitsausohjeita ja annettuja parametreja. Sen lisäksi ohjelmisto kerää kaiken tiedon hitsausprosessista ja luo siitä vaadittavat dokumentit. Diplomityön teoriaosuus muodostuu kirjallisuuskatsauksesta ratkaisuliike-toimintaan, kilpailija-analyysin ja kilpailuvoimien teoriaan sekä hitsauksen laadunhallintaan. Työn empiriaosuus on laadullinen tutkimus, jossa tutkitaan kilpailevia hitsauksen laadunhallintaohjelmistoja ja haastatellaan ohjelmistojen käyttäjiä. Diplomityön tuloksena saadaan uusi kilpailija-analyysimalli hitsauksen laadunhallintaohjelmistoille. Mallin avulla voidaan arvostella ohjelmistot niiden tarjoamien primääri- ja sekundääriominaisuuksien perusteella. Toiseksi tässä diplomityössä analysoidaan nykyinen kilpailijatilanne hyödyntämällä juuri kehitettyä kilpailija-analyysimallia.

Model of Big Data Failure: Review of Information System Failure

In the new age of information technology, big data has grown to be the prominent phenomena. As information technology evolves, organizations have begun to adopt big data and apply it as a tool throughout their decision-making processes. Research on big data has grown in the past years however mainly from a technical stance and there is a void in business related cases. This thesis fills the gap in the research by addressing big data challenges and failure cases. The Technology-Organization-Environment framework was applied to carry out a literature review on trends in Business Intelligence and Knowledge management information system failures. A review of extant literature was carried out using a collection of leading information system journals. Academic papers and articles on big data, Business Intelligence, Decision Support Systems, and Knowledge Management systems were studied from both failure and success aspects in order to build a model for big data failure. I continue and delineate the contribution of the Information System failure literature as it is the principal dynamics behind technology-organization-environment framework. The gathered literature was then categorised and a failure model was developed from the identified critical failure points. The failure constructs were further categorized, defined, and tabulated into a contextual diagram. The developed model and table were designed to act as comprehensive starting point and as general guidance for academics, CIOs or other system stakeholders to facilitate decision-making in big data adoption process by measuring the effect of technological, organizational, and environmental variables with perceived benefits, dissatisfaction and discontinued use.

Non-offensive defence : a criteria model of military credibility

Finnish Defence Studies is published under the auspices of the War College, and the contributions reflect the fields of research and teaching of the College. Finnish Defence Studies will occasionally feature documentation on Finnish Security Policy. Views expressed are those of the authors and do not necessarily imply endorsement by the War College.

Model of Big Data Failure: Review of Information System Failure

In the new age of information technology, big data has grown to be the prominent phenomena. As information technology evolves, organizations have begun to adopt big data and apply it as a tool throughout their decision-making processes. Research on big data has grown in the past years however mainly from a technical stance and there is a void in business related cases. This thesis fills the gap in the research by addressing big data challenges and failure cases. The Technology-Organization-Environment framework was applied to carry out a literature review on trends in Business Intelligence and Knowledge management information system failures. A review of extant literature was carried out using a collection of leading information system journals. Academic papers and articles on big data, Business Intelligence, Decision Support Systems, and Knowledge Management systems were studied from both failure and success aspects in order to build a model for big data failure. I continue and delineate the contribution of the Information System failure literature as it is the principal dynamics behind technology-organization-environment framework. The gathered literature was then categorised and a failure model was developed from the identified critical failure points. The failure constructs were further categorized, defined, and tabulated into a contextual diagram. The developed model and table were designed to act as comprehensive starting point and as general guidance for academics, CIOs or other system stakeholders to facilitate decision-making in big data adoption process by measuring the effect of technological, organizational, and environmental variables with perceived benefits, dissatisfaction and discontinued use.

Assessing the dynamics of terms of trade in a model of cumulative causation and structural change

ABSTRACT The motivation for this paper stems from the steady decline in the share of consumer expenditures on goods produced in the global south, coupled with the (empirically ambiguous) Singer/Prebisch hypothesis that this can be explained by a secular decline in the southern terms of trade. Drawing on these sources of inspiration, the paper sets out to study the dynamics of the terms of trade using a multi-sector growth model based on the principle of cumulative causation. The upshot is a North-South model of growth and trade in which the evolution of the terms of trade depends on differential rates of productivity growth in different sectors of the economy - and in which terms of trade dynamics may not be the best guide as to whether or not there is an uneven development problem.

Motivational model of problem drinking for men and women /

This thesis tested a path model of the relationships of reasons for drinking and reasons for limiting drinking with consumption of alcohol and drinking problems. It was hypothesized that reasons for drinking would be composed of positively and negatively reinforcing reasons, and that reasons for limiting drinking would be composed of personal and social reasons. Problem drinking was operationalized as consisting of two factors, consumption and drinking problems, with a positive relationship between the two. It was predicted that positively and negatively reinforcing reasons for drinking would be associated with heavier consumption and, in turn, more drinking problems, through level of consumption. Negatively reinforcing reasons were also predicted to be associated with drinking problems directly, independent of level of consumption. It was hypothesized that reasons for limiting drinking would be associated with lower levels of consumption and would be related to fewer drinking problems, through level of consumption. Finally, among women, reasons for limiting drinking were expected to be associated with drinking problems directly, independent of level of consumption. The sample, was taken from the second phase of the Niagara Young Aduh Health Study, a community sample of young adult men and women. Measurement models of reasons for drinking, reasons for limiting drinking, and problem drinking were tested using Confirmatory Factor Analysis. After adequate fit of each measurement model was obtained, the complete structural model, with all hypothesized paths, was tested for goodness of fit. Cross-group equality constraints were imposed on all models to test for gender differences. The results provided evidence supporting the hypothesized structure of reasons for drinking and problem drinking. A single factor model of reasons for limiting drinking was used in the analyses because a two-factor model was inadequate. Support was obtained for the structural model. For example, the resuhs revealed independent influences of Positively Reinforcing Reasons for Drinking, Negatively Reinforcing Reasons for Drinking, and Reasons for Limiting Drinking on consumption. In addition. Negatively Reinforcing Reasons helped to account for Drinking Problems independent of the amount of alcohol consumed. Although an additional path from Reasons for Limiting Drinking to Drinking Problems was hypothesized for women, it was of marginal significance and did not improve the model's fit. As a result, no sex differences in the model were found. This may be a result of the convergence of drinking patterns for men and women. Furthermore, it is suggested that gender differences may only be found in clinical samples of problem drinkers, where the relative level of consumption for women and men is similar.

A contingency model of job satisfaction

The present research study was designed to test a contingency model of job satisfaction based on participation in decision making as the antecedent variable and job involvement as the intervening variable. The instruments used to measure the variables were the participation in decision making scale developed by Siegel and Ruh (1973), the job involvement scale by Lodahl and Kejner (1965) and the job satisfaction construct derived from Hoppock (1935). The findings indicate that statistically significant correlations do exist for the 1995 educators surveyed in this study. Educators who reported high levels of participation in decision making consistently reported high levels of job involvement (p!: 0.001). Also, teachers reporting high levels of job involvement consistently scored high on their levels of job satis faction (p!: 0.001). All major hypotheses were sUPFOrted by the data. Through exploratory hypotheses, the study attempted to develop statements of relationships between criteria of job satisfaction and sex and marital status of employees in the system. The hypotheses received only minimal support, but the results did highlight the impracticability of attempting to develop any such relationships without using definite personality and situational variables as moderators. Differences between male and female socialization, sex discrimination and multiplicity of roles are briefly discussed as possible explanations for the reported findings.

A model of personality and health : coping styles as a moderator in the perfectionism-health connection

The purpose of this study was to examine a model of personality and health. Specifically, this thesis examined perfectionism as a predictor of health status and health behaviours, as moderated by coping styles. A community sample of 813 young adults completed the Multidimensional Perfectionism Scale, the Coping Strategy Indicator, and measures of health symptoms, health care utilization, and various health behaviours. Multiple regression analyses revealed a number of significant findings. First, perfectionism and coping styles contributed significant main effects in predicting health status and health behaviours, although coping styles were not shown to moderate the perfectionism-health relationship. The data showed that perfectionism did constitute a health risk, both in terms of health status and health behaviours. Finally, an unexpected finding was that perfectionism also included adaptive features related to health. Specifically, some dimensions of perfectionism were also associated with reports of better health status and involvement in some positive health behaviours.

A social-cognitive model of monitoring and its relationship to behaviour in a naturalistic observation : development and individual differences

years 8 months) and 24 older (M == 7 years 4 months) children. A Monitoring Process Model (MPM) was developed and tested in order to ascertain at which component process ofthe MPM age differences would emerge. The MPM had four components: (1) assessment; (2) evaluation; (3) planning; and (4) behavioural control. The MPM was assessed directly using a referential communication task in which the children were asked to make a series of five Lego buildings (a baseline condition and one building for each MPM component). Children listened to instructions from one experimenter while a second experimenter in the room (a confederate) intetjected varying levels ofverbal feedback in order to assist the children and control the component ofthe MPM. This design allowed us to determine at which "stage" ofprocessing children would most likely have difficulty monitoring themselves in this social-cognitive task. Developmental differences were obselVed for the evaluation, planning and behavioural control components suggesting that older children were able to be more successful with the more explicit metacomponents. Interestingly, however, there was no age difference in terms ofLego task success in the baseline condition suggesting that without the intelVention ofthe confederate younger children monitored the task about as well as older children. This pattern ofresults indicates that the younger children were disrupted by the feedback rather than helped. On the other hand, the older children were able to incorporate the feedback offered by the confederate into a plan ofaction. Another aim ofthis study was to assess similar processing components to those investigated by the MPM Lego task in a more naturalistic observation. Together the use ofthe Lego Task ( a social cognitive task) and the naturalistic social interaction allowed for the appraisal of cross-domain continuities and discontinuities in monitoring behaviours. In this vein, analyses were undertaken in order to ascertain whether or not successful performance in the MPM Lego Task would predict cross-domain competence in the more naturalistic social interchange. Indeed, success in the two latter components ofthe MPM (planning and behavioural control) was related to overall competence in the naturalistic task. However, this cross-domain prediction was not evident for all levels ofthe naturalistic interchange suggesting that the nature ofthe feedback a child receives is an important determinant ofresponse competency. Individual difference measures reflecting the children's general cognitive capacity (Working Memory and Digit Span) and verbal ability (vocabulary) were also taken in an effort to account for more variance in the prediction oftask success. However, these individual difference measures did not serve to enhance the prediction oftask performance in either the Lego Task or the naturalistic task. Similarly, parental responses to questionnaires pertaining to their child's temperament and social experience also failed to increase prediction oftask performance. On-line measures ofthe children's engagement, positive affect and anxiety also failed to predict competence ratings.

A speculative systems model of the dynamic interaction among students, faculty and administration in the community college, with particular reference to intrinsic motivation and the teacher-administrator interface

The challenge the community college faces in helping meet the needs of the living open system of society is examined in this study. It is postulated that internalization student outcomes are required by society to reduce entropy and remain self-renewing. Such behavior is characterized as having an intrinsically motivated energy source and displays the seeking and conquering of challenge, the development of reflective knowledge and skill, full use of all capabilities, internal control, growth orientation, high self-esteem, relativistic thinking and competence. The development of a conceptual systems model that suggests how transactions among students, faculty and administration might occur to best meet the needs of internalization outcomes in students, and intrinsic motivation in faculty is a major purpose of this study. It is a speculative model that is based on a synthesis of a wide variety of variables. Empirical evidence, theoretical considerations, and speculative ideas are gathered together from researchers and theoretici.ans who are working on separate answers to questions of intrinsic motivation, internal control and environments that encourage their development. The model considers the effect administrators·have on faculty anq the corresponding effect faculty may have on students. The major concentration is on the administrator--teacher interface.For administrators the model may serve as a guide in planning effective transactions, and establishing system goals. The teacher is offered a means to coordinate actions toward a specific overall objective, and the administrator, teacher and researcher are invited to use the model to experiment, innovate, verify the assumptions on which the model is based, and raise additional hypotheses. Goals and history of the community colleges in Ontario are examined against current problems, previous progress and open system thinking. The nature of the person as a five part system is explored with emphasis on intrinsic motivation. The nature, operation, conceptualization, and value of this internal energy source is reviewed in detail. The current state of society, education and management theory are considered and the value of intrinsically motivating teaching tasks together with "system four" leadership style are featured. Evidence is reviewed that suggests intrinsically motivated faculty are needed, and "system four" leadership style is the kind of interaction-influence system needed to nurture intrinsic motivation in faculty.