Multi-microprocessor control of processes with pure time delay

In 1967 a novel scheme was proposed for controlling processes with large pure time delay (Fellgett et al, 1967) and some of the constituent parts of the scheme were investigated (Swann, 1970; Atkinson et al, 1973). At that time the available computational facilities were inadequate for the scheme to be implemented practically, but with the advent of modern microcomputers the scheme becomes feasible. This paper describes recent work (Mitchell, 1987) in implementing the scheme in a new multi-microprocessor configuration and shows the improved performance it provides compared with conventional three-term controllers.

Application of a novel optimal control algorithm to a benchmark fed-batch fermentation process

A novel algorithm for solving nonlinear discrete time optimal control problems with model-reality differences is presented. The technique uses Dynamic Integrated System Optimisation and Parameter Estimation (DISOPE) which has been designed to achieve the correct optimal solution in spite of deficiencies in the mathematical model employed in the optimisation procedure. A method based on Broyden's ideas is used for approximating some derivative trajectories required. Ways for handling con straints on both manipulated and state variables are described. Further, a method for coping with batch-to- batch dynamic variations in the process, which are common in practice, is introduced. It is shown that the iterative procedure associated with the algorithm naturally suits applications to batch processes. The algorithm is success fully applied to a benchmark problem consisting of the input profile optimisation of a fed-batch fermentation process.

The state estimation of flow demands in gas networks from sparse pressure telemetry

This paper presents novel observer-based techniques for the estimation of flow demands in gas networks, from sparse pressure telemetry. A completely observable model is explored, constructed by incorporating difference equations that assume the flow demands are steady. Since the flow demands usually vary slowly with time, this is a reasonable approximation. Two techniques for constructing robust observers are employed: robust eigenstructure assignment and singular value assignment. These techniques help to reduce the effects of the system approximation. Modelling error may be further reduced by making use of known profiles for the flow demands. The theory is extended to deal successfully with the problem of measurement bias. The pressure measurements available are subject to constant biases which degrade the flow demand estimates, and such biases need to be estimated. This is achieved by constructing a further model variation that incorporates the biases into an augmented state vector, but now includes information about the flow demand profiles in a new form.

Efficient wireless power delivery for biomedical implants

Power delivery for biomedical implants is a major consideration in their design for both measurement and stimulation. When performed by a wireless technique, transmission efficiency is critically important not only because of the costs associated with any losses but also because of the nature of those losses, for example, excessive heat can be uncomfortable for the individual involved. In this study, a method and means of wireless power transmission suitable for biomedical implants are both discussed and experimentally evaluated. The procedure initiated is comparable in size and simplicity to those methods already employed; however, some of Tesla’s fundamental ideas have been incorporated in order to obtain a significant improvement in efficiency. This study contains a theoretical basis for the approach taken; however, the emphasis here is on practical experimental analysis

Determination of the gas diffusion coefficient of a peat grassland soil

Peatland habitats are important carbon stocks that also have the potential to be significant sources of greenhouse gases, particularly when subject to changes such as artificial drainage and application of fertilizer. Models aiming to estimate greenhouse gas release from peatlands require an accurate estimate of the diffusion coefficient of gas transport through soil (Ds). The availability of specific measurements for peatland soils is currently limited. This study measured Ds for a peat soil with an overlying clay horizon and compared values with those from widely available models. The Ds value of a sandy loam reference soil was measured for comparison. Using the Currie (1960) method, Ds was measured between an air-filled porosity (ϵ) range of 0 and 0.5 cm3 cm−3. Values of Ds for the peat cores ranged between 3.2 × 10−4 and 4.4 × 10−3 m2 hour−1, for loamy clay cores between 0 and 4.7 × 10−3 m2 hour−1 and for the sandy reference soil they were between 5.4 × 10−4 and 3.4 × 10−3 m2 hour−1. The agreement of measured and modelled values of relative diffusivity (Ds/D0, with D0 the diffusion coefficient through free air) varied with soil type; however, the Campbell (1985) model provided the best replication of measured values for all soils. This research therefore suggests that the use of the Campbell model in the absence of accurately measured Ds and porosity values for a study soil would be appropriate. Future research into methods to reduce shrinkage of peat during measurement and therefore allow measurement of Ds for a greater range of ϵ would be beneficial.

Bridging the segmentation theory/practice divide

More than thirty years ago, Wind's seminal review of research in market segmentation culminated with a research agenda for the subject area. In the intervening period, research has focused on the development of segmentation bases and models, segmentation research techniques and the identification of statistically sound solutions. Practical questions about implementation and the integration of segmentation into marketing strategy have received less attention, even though practitioners are known to struggle with the actual practice of segmentation. This special issue is motivated by this tension between theory and practice, which has shaped and continues to influence the research priorities for the field. Although many years may have elapsed since Wind's original research agenda, pressing questions about effectiveness and productivity apparently remain; namely: (i) concerns about the link between segmentation and performance, and its measurement; and (ii) the notion that productivity improvements arising from segmentation are only achievable if the segmentation process is effectively implemented. There were central themes to the call for papers for this special issue, which aims to develop our understanding of segmentation value, productivity and strategies, and managerial issues and implementation.

Efficient wireless power delivery for biomedical implants

Power delivery for biomedical implants is a major consideration in their design for both measurement and stimulation. When performed by a wireless technique, transmission efficiency is critically important not only because of the costs associated with any losses but also because of the nature of those losses, for example, excessive heat can be uncomfortable for the individual involved. In this study, a method and means of wireless power transmission suitable for biomedical implants are both discussed and experimentally evaluated. The procedure initiated is comparable in size and simplicity to those methods already employed; however, some of Tesla’s fundamental ideas have been incorporated in order to obtain a significant improvement in efficiency. This study contains a theoretical basis for the approach taken; however, the emphasis here is on practical experimental analysis.

Using lexical diversity measures to operationalise language dominance in bilinguals

Treffers-Daller and Korybski propose to operationalize language dominance on the basis of measures of lexical diversity, as computed, in this particular study, on transcripts of stories told by Polish-English bilinguals in each of their languages They compute four different Indices of Language Dominance (ILD) on the basis of two different measures of lexical diversity, the Index of Guiraud (Guiraud, 1954) and HD-D (McCarthy & Jarvis, 2007). They compare simple indices, which are based on subtracting scores from one language from scores for another language, to more complex indices based on the formula Birdsong borrowed from the field of handedness, namely the ratio of (Difference in Scores) / (Sum of Scores). Positive scores on each of these Indices of Language Dominance mean that informants are more English-dominant and negative scores that they are more Polish-dominant. The authors address the difficulty of comparing scores across languages by carefully lemmatizing the data. Following Flege, Mackay and Piske (2002) they also look into the validity of these indices by investigating to what extent they can predict scores on other, independently measured variables. They use correlations and regression analysis for this, which has the advantage that the dominance indices are used as continuous variables and arbitrary cut-off points between balanced and dominant bilinguals need not be chosen. However, they also show how the computation of z-scores can help facilitate a discussion about the appropriateness of different cut-off points across different data sets and measurement scales in those cases where researchers consider it necessary to make categorial distinctions between balanced and dominant bilinguals. Treffers-Daller and Korybski correlate the ILD scores with four other variables, namely Length of Residence in the UK, attitudes towards English and life in the UK, frequency of usage of English at home and frequency of code-switching. They found that the indices correlated significantly with most of these variables, but there were clear differences between the Guiraud-based indices and the HDD-based indices. In a regression analysis three of the measures were also found to be a significant predictor of English language usage at home. They conclude that the correlations and the regression analyses lend strong support to the validity of their approach to language dominance.

Astringency reduction in red wine by whey proteins

Whey is a by-product of cheese manufacturing and therefore investigating new applications of whey proteins will contribute towards the valorisation of whey and hence waste reduction. This study shows for the first time a detailed comparison of the effectiveness of gelatin and β-lactoglobulin (β-LG) as fining agents. Gelatin was more reactive than whey proteins to tannic acid as shown by both the astringency method (with ovalbumin as a precipitant) and the tannins determination method (with methylcellulose as a precipitant). The two proteins showed similar selectivity for polyphenols but β-LG did not remove as much catechin. The fining agent was removed completely or to a trace level after centrifugation followed by filtration which minimises its potential allergenicity. In addition, improved understanding of protein–tannin interactions was obtained by fluorescence, size measurement and isothermal titration calorimetry (ITC). Overall this study demonstrates that whey proteins have the potential of reducing astringency in red wine and can find a place in enology.

'More-than-human’ resilience(s)? Enhancing community in Finnish forest farms

Community resilience is widely understood as a critical element in the relatively under-explored concept of social resilience. Through engaging with ‘more-than-human’ literatures, a more expansive view of the ‘social’ emerges, which repositions individuals as networked and agency as relational. This moves resilience away from its hegemonic positioning as a neoliberal strategy of individualisation and responsibilisation, with it instead emerging as an everyday ‘doing’ embedded in the human and non-human networks of relationality that we form and are formed by. The paper develops this socio-cultural conceptualisation through an original and empirically grounded discussion of Finnish farm communities and the role of the forest in developing, maintaining and enhancing these essential, connective assemblages. Resilience becomes conceptualised as dynamic, uneven, multiple and contextual performances or resiliences. While this further problematizes the comparative measurement and operationalisation of resilience, its networked and relational nature arguably offers a more inclusive and ethically grounded concept that, furthermore, negates the socio-ecological divide that persists in resilience thinking.

Thermoluminescence dating of Brazilian indigenous ceramics

Two indigenous ceramics fragments, one from Lagoa Queimada (LQ) and another from Barra dos Negros (BN), both sites located on Bahia state (Brazil), were dated by termoluminescence (TL) method. Each fragment was physically prepared and divided into two fractions, one was used for TL measurement and the other for annual dose determination. The TL fraction was chemically treated, divided in sub samples and irradiated with several doses. The plot extrapolation from TL intensities as function of radiation dose enabled the determination of the accumulated dose (D(ac)), 3.99 Gy and 1.88 Gy for LQ and BN, respectively. The annual dose was obtained through the uranium, thorium and potassium determination by ICP-MS. The annual doses (D(an)) obtained were 2.86 and 2.26 mGy/year. The estimated ages were similar to 1375 and 709 y for BN and LQ ceramics, respectively. The ages agreed with the archaeologists` estimation for the Aratu and Tupi tradition periods, respectively.

Fundações superficiais para linhas de transmissão em argilas moles saturadas

As fundações empregadas para linhas de transmissão de alta tensão em depósitos de argilas moles saturadas são geralmente estacas. No Rio Grande do Sul, projetos alternativos com fundações superficiais foram empregados em forma experimental para torres de suspensão, as quais apresentaram bom desempenho com menor custo. Esta pesquisa visa apontar critérios racionais da mecânica dos solos que permitam projetar, a partir do conhecimento do perfil de resistência não drenada, fundações superficiais em depósitos de argilas moles saturadas com maior confiabilidade. Para a determinaçao do perfil de resistência não drenada foi desenvolvido um cone manual com leituras elétricas, o qual foi testado apresentando bons resultados. A vantagem do uso deste equipamento reside no fato de que pode ser transportado manualmente a locais de difícil acesso, onde são implantadas as torres de alta tensão. Os demais parâmetros de solos do local de estudo, situado no município de Canoas no Rio Grande do Sul, foram obtidos a partir de ensaios de compressão triaxial do tipo adensado isotropicamente não drenado (CIU) com medida de poro pressão e de ensaios de adensamento. Foram analisadas as fundações superficiais das torres de suspensão projetadas, empregando teorias analíticas convencionais, baseadas no conhecimento da resistência não drenada, e o método de elementos finitos. A partir deste estudo, é sugerida uma metodologia para projetos de fundações superficiais de torres de suspensão em argilas moles saturadas.