Energy-efficient diversity combining for different access schemes in a multi-path dispersive channel

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e Computadores

Aplicação da realidade aumentada à educação e treino na Engenharia Civil, Arquitectura e construção

Dissertação para obtenção do Grau Mestre em Engenharia Civil – Perfil de Construção

CMOS indoor light energy harvesting system for wireless sensing applications

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores

Petri net based development of globally-asynchronous locally-synchronous distributed embedded systems

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores

Heterogeneous computing with an algorithmic skeleton framework

The Graphics Processing Unit (GPU) is present in almost every modern day personal computer. Despite its specific purpose design, they have been increasingly used for general computations with very good results. Hence, there is a growing effort from the community to seamlessly integrate this kind of devices in everyday computing. However, to fully exploit the potential of a system comprising GPUs and CPUs, these devices should be presented to the programmer as a single platform. The efficient combination of the power of CPU and GPU devices is highly dependent on each device’s characteristics, resulting in platform specific applications that cannot be ported to different systems. Also, the most efficient work balance among devices is highly dependable on the computations to be performed and respective data sizes. In this work, we propose a solution for heterogeneous environments based on the abstraction level provided by algorithmic skeletons. Our goal is to take full advantage of the power of all CPU and GPU devices present in a system, without the need for different kernel implementations nor explicit work-distribution.To that end, we extended Marrow, an algorithmic skeleton framework for multi-GPUs, to support CPU computations and efficiently balance the work-load between devices. Our approach is based on an offline training execution that identifies the ideal work balance and platform configurations for a given application and input data size. The evaluation of this work shows that the combination of CPU and GPU devices can significantly boost the performance of our benchmarks in the tested environments, when compared to GPU-only executions.

Evaluation of uv spectrophotometry for estimation of nitrite and nitrate in nitrified urine

Water is a limited resource for which demand is growing. Contaminated water from inadequate wastewater treatment provides one of the greatest health challenges as it restricts development and increases poverty in emerging and developing countries. Therefore, the connection between wastewater and human health is linked to access to sanitation and to human waste disposal. Adequate sanitation is expected to create a barrier between disposed human excreta and sources of drinking water. Different approaches to wastewater management are required for different geographical regions and different stages of economic governance depending on the capacity to manage wastewater. Effective wastewater management can contribute to overcome the challenges of water scarcity. Separate collection of human urine at its source is one promising approach that strongly reduces the economic and load demands on wastewater treatment plants (WWTP). Treatment of source-separated urine appears as a sanitation system that is affordable, produces a valuable fertiliser, reduces pollution of water resources and promotes health. However, the technical realisation of urine separation still faces challenges. Biological hydrolysis of urea causes a strong increase of ammonia and pH. Under these conditions ammonia volatilises which can cause odour problems and significant nitrogen losses. The above problems can be avoided by urine stabilisation. Biological nitrification is a suitable process for stabilisation of urine. Urine is a highly concentrated nutrient solution which can lead to strong inhibition effects during bacterial nitrification. This can further lead to process instabilities. The major cause of instability is accumulation of the inhibitory intermediate compound nitrite, which could lead to process breakdown. Enhanced on-line nitrite monitoring can be applied in biological source-separated urine nitrification reactors as a sustainable and efficient way to improve the reactor performance, avoiding reactor failures and eventual loss of biological activity. Spectrophotometry appears as a promising candidate for the development and application of on-line nitrite monitoring. Spectroscopic methods together with chemometrics are presented in this work as a powerful tool for estimation of nitrite concentrations. Principal component regression (PCR) is applied for the estimation of nitrite concentrations using an immersible UV sensor and off-line spectra acquisition. The effect of particles and the effect of saturation, respectively, on the UV absorbance spectra are investigated. The analysis allows to conclude that (i) saturation has a substantial effect on nitrite estimation; (ii) particles appear to have less impact on nitrite estimation. In addition, improper mixing together with instabilities in the urine nitrification process appears to significantly reduce the performance of the estimation model.

Net metering: definição de metodologia e estudo de caso

Face à crise económica e financeira, o setor fotovoltaico português tem sofrido diversas condicionantes, na sua maioria políticas, assistindo-se a uma alteração nos regimes de micro e minigeração. Com as tarifas de referência a sofrerem reduções drásticas nos últimos dois anos, os regimes bonificados deixaram de ser economicamente viáveis e interessantes do ponto de vista do consumidor. Esta situação está a pôr em causa as empresas que atuam no setor, assim como o desenvolvimento do próprio mercado fotovoltaico português. Torna-se assim necessário encontrar alternativas aos regimes bonificados, que relancem o setor e que permitam às empresas continuar a trabalhar. Uma dessas alternativas passa pela regulamentação da instalação de unidades de autoconsumo, nomeadamente com soluções de net metering. Dada a região privilegiada onde se encontra Portugal, e ao facto de já ter atingido a paridade de rede solar, o país depara-se com uma oportunidade única para o desenvolvimento da tecnologia fotovoltaica através da implementação de regimes de autoconsumo que interessa avaliar. Neste contexto, desenvolveu-se uma ferramenta informática, que permite, face a um determinado consumidor, avaliar a viabilidade económica e técnica de implementação de soluções de net metering. Uma vez que os resultados são fortemente dependentes da aplicação visada, este trabalho é baseado em dois estudos de caso – setor comercial e residencial – compreendendo a análise de dados reais já existentes e a recolha de dados no terreno. Nesta dissertação, é ainda feito um levantamento sobre os quadros legislativos atualmente vigentes a nível internacional, que regulam o mecanismo de net metering.

The effect of key process operational conditions on enhanced biological phosphorus removal from wastewater

Enhanced biological phosphorus removal (EBPR) is the most economic and sustainable option used in wastewater treatment plants (WWTPs) for phosphorus removal. In this process it is important to control the competition between polyphosphate accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs), since EBPR deterioration or failure can be related with the proliferation of GAOs over PAOs. This thesis is focused on the effect of operational conditions (volatile fatty acid (VFA) composition, dissolved oxygen (DO) concentration and organic carbon loading) on PAO and GAO metabolism. The knowledge about the effect of these operational conditions on EBPR metabolism is very important, since they represent key factors that impact WWTPs performance and sustainability. Substrate competition between the anaerobic uptake of acetate and propionate (the main VFAs present in WWTPs) was shown in this work to be a relevant factor affecting PAO metabolism, and a metabolic model was developed that successfully describes this effect. Interestingly, the aerobic metabolism of PAOs was not affected by different VFA compositions, since the aerobic kinetic parameters for phosphorus uptake, polyhydroxyalkanoates (PHAs) degradation and glycogen production were relatively independent of acetate or propionate concentration. This is very relevant for WWTPs, since it will simplify the calibration procedure for metabolic models, facilitating their use for full-scale systems. The DO concentration and aerobic hydraulic retention time (HRT) affected the PAO-GAO competition, where low DO levels or lower aerobic HRT was more favourable for PAOs than GAOs. Indeed, the oxygen affinity coefficient was significantly higher for GAOs than PAOs, showing that PAOs were far superior at scavenging for the often limited oxygen levels in WWTPs. The operation of WWTPs with low aeration is of high importance for full-scale systems, since it decreases the energetic costs and can potentially improve WWTP sustainability. Extended periods of low organic carbon load, which are the most common conditions that exist in full-scale WWTPs, also had an impact on PAO and GAO activity. GAOs exhibited a substantially higher biomass decay rate as compared to PAOs under these conditions, which revealed a higher survival capacity for PAOs, representing an advantage for PAOs in EBPR processes. This superior survival capacity of PAOs under conditions more closely resembling a full-scale environment was linked with their ability to maintain a residual level of PHA reserves for longer than GAOs, providing them with an effective energy source for aerobic maintenance processes. Overall, this work shows that each of these key operational conditions play an important role in the PAO-GAO competition and should be considered in WWTP models in order to improve EBPR processes.

Characterization tests for insulation boards made from corn cob and natural glues

In recent years there has been a growing interest in developing news solutions for more ecologic and efficient construction, including natural, renewable and local materials, thus contributing in the search for more efficient, economic and environmentally friendly construction. Several authors have assessed the possibility of using various agricultural sub products or wastes, as part of the effort of the scientific community to find alternative and more ecologic construction materials. Corn cob is an agricultural waste from a very important worldwide crop. Natural glues are made from natural materials, non-mineral, that can be used as such or after some modifications to achieve the behaviour and performance required. Two examples of these natural glues are casein and wheat flour-based glues that were used in the present study. Boards with different compositions were manufactured, having as variables the type of glue, the dimension of the corn cob particles and the features of the pressing process. The tests boards were characterized with physical and mechanical tests, such as thermal conductivity (λ) with a ISOMET 2104 and 60 mm diameter contact probe, density (ρ) based on EN 1602:2013, surface hardness (SH) with a PCE Shore A durometer, surface resistance (SR) with a PROCEQ PT pendular sclerometer, bending behaviour (σ) based on EN 12089:2013, compression behaviour (σ10) based on EN 826:2013 and resilience (R) based on EN 1094-1:2008, with a Zwick Rowell bending equipment with 2 kN and 50 kN load cells (Fig. 1), dynamic modulus of elasticity (Ed) with a Zeus Resonance Meter equipment (Fig. 5) based on NP EN 14146:2006 and water vapour permeability (δ) based on EN 12086:2013. The various boards produced were characterized according to the tests and the ones with the best results were C8_c8 (casein glue, grain size 2,38-4,76 mm, cold pressing for 8 hours), C8_c4 (casein glue, grain size 2,38-4,76 mm, cold pressing for 4 hours), F8_h0.5 (wheat flour glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours), FEV8_h0.5 (wheat flour, egg white and vinegar glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours) and FEVH68_c4 (wheat flour, egg white, vinegar and 6 g of sodium hydroxide glue, grain size 2,38-4,76 mm, cold pressing for 4 hours). Taking into account the various boards produced and respective test results the type of glue and the pressure and pressing time are very important factors which strongly influence the final product. The results obtained confirmed the initial hypotheses that these boards have potential as a thermal and, eventually, acoustic insulation material, to use as coating or intermediate layer on walls, floors or false ceilings. This type of board has a high mechanical resistance when compared with traditional insulating materials.The integrity of these boards seems to be maintained even in higher humidity environments. However, due to biological susceptibility and sensitivity to water, they would be more adequate for application in dry interior conditions.

Image processing for displacement measurements

Since the invention of photography humans have been using images to capture, store and analyse the act that they are interested in. With the developments in this field, assisted by better computers, it is possible to use image processing technology as an accurate method of analysis and measurement. Image processing's principal qualities are flexibility, adaptability and the ability to easily and quickly process a large amount of information. Successful examples of applications can be seen in several areas of human life, such as biomedical, industry, surveillance, military and mapping. This is so true that there are several Nobel prizes related to imaging. The accurate measurement of deformations, displacements, strain fields and surface defects are challenging in many material tests in Civil Engineering because traditionally these measurements require complex and expensive equipment, plus time consuming calibration. Image processing can be an inexpensive and effective tool for load displacement measurements. Using an adequate image acquisition system and taking advantage of the computation power of modern computers it is possible to accurately measure very small displacements with high precision. On the market there are already several commercial software packages. However they are commercialized at high cost. In this work block-matching algorithms will be used in order to compare the results from image processing with the data obtained with physical transducers during laboratory load tests. In order to test the proposed solutions several load tests were carried out in partnership with researchers from the Civil Engineering Department at Universidade Nova de Lisboa (UNL).

Rehabilitation of renders of old buildings in Portugal: survey, supporting methodology proposal and case study

The main purpose of the research is to present a proposal for a methodology to support the rehabilitation project of renders of old buildings in Portugal. To achieve the objective it was considered essential to define the main types of participants and aspects to integrate the proposal. The research methodology consists in an inquiry presented to professional participants in rehabilitation, a market study of materials and products available in Portugal, the design of a methodology proposal and its application to a case study. The inquiry sample totals 24 answers from the targeted professionals. A sequence of relevant supporting procedures consists in the proposal, which aims to provide a supporting methodology to decide and project in this context and also to be tested with its application to the building. This proposal was applied to an old building with load-bearing stone masonry walls and air-lime based renders. It was concluded that the assessment of the building and external renderings’ condition, its diagnosis and of the supporting walls, the definition of intervention, the specification of materials to be used and performance requirements to comply, and also plans for conservation and periodic maintenance, are crucial. From the inquiry, compatibility between materials and complementary roles and points of view of different types of participants in rehabilitation must be highlighted. A proposal for a methodology to support the project could provide useful guidance particularly for architects and construction engineers, and improve the understanding of direct participants on site, therefore contributing for the correct implementation of intervention.

Strengthening to seismic action of reinforced columns with rectangular cross-section

The first part of this research work regards the assessment of the mathematical modelling of reinforced concrete columns confined with carbon fibre (CFRP) sheets under axial loading. The purpose was to evaluate existing analytical models, contribute to possible improvements and choose the best model(s) to be part of a new model for the prediction of the behaviour of confined columns under bending and compression. For circular columns, a wide group of authors have proposed several models specific for FRP-confined concrete. The analysis of some of the existing models was carried out by comparing these with several tested columns. Although several models predict fairly the peak load only few can properly estimate the load-strain and dilation behaviour of the columns. Square columns confined with CFRP show a more complex interpretation of their behaviour. Accordingly, the analysis of two experimental programs was carried out to propose new modelling equations for the whole behaviour of columns. The modelling results show that the analytical curves are in general agreement with the presented experimental curves for a wide range of dimensions. An analysis similar to the one done for circular columns was this turn carried out for square columns. Few models can fairly estimate the whole behaviour of the columns and with less accuracy at all levels when compared with circular columns. The second part of this study includes seven experimental tests carried out on reinforced concrete rectangular columns with rounded corners, different damage condition and with confinement and longitudinal strengthening systems. It was concluded that the use of CFRP confinement is viable and of effective performance enhancement alone and combined with other techniques, maintaining a good ductile behaviour for established threshold displacements. As regards the use of external longitudinal strengthening combined with CFRP confinement, this system is effective for the performance enhancement and viable in terms of execution. The load capacity was increased significantly, preserving also in this case a good ductile behaviour for threshold displacements. As to the numerical nonlinear modelling of the tested columns, the results show a variation of the peak load of 1% to 10% compared with tests results. The good results are partly due to the inclusion of the concrete constitutive model by Mander et al. modified by Faustino, Chastre & Paula taking into account the confinement effect. Despite the reasonable approximation to tests results, the modelling results showed higher unloading, which leads to an overestimate dissipated energy and residualdisplacement.

Avaliação económica em transplantação renal : abordagem estratégica do processo de doação e análise de custo-utilidade do programa de transplantação renal versus hemodiálise

SUMÁRIO - O desafio atual da Saúde Pública é assegurar a sustentabilidade financeira do sistema de saúde. Em ambiente de recursos escassos, as análises económicas aplicadas à prestação dos cuidados de saúde são um contributo para a tomada de decisão que visa a maximização do bem-estar social sujeita a restrição orçamental. Portugal é um país com 10,6 milhões de habitantes (2011) com uma incidência e prevalência elevadas de doença renal crónica estadio 5 (DRC5), respetivamente, 234 doentes por milhão de habitantes (pmh) e 1.600 doentes/pmh. O crescimento de doenças associadas às causas de DRC, nomeadamente, diabetes Mellitus e hipertensão arterial, antecipam uma tendência para o aumento do número de doentes. Em 2011, dos 17.553 doentes em tratamento substitutivo renal, 59% encontrava-se em programa de hemodiálise (Hd) em centros de diálise extra-hospitalares, 37% viviam com um enxerto renal funcionante e 4% estavam em diálise peritoneal (SPN, 2011). A lista ativa para transplante (Tx) renal registava 2.500 doentes (SPN 2009). O Tx renal é a melhor modalidade terapêutica pela melhoria da sobrevida, qualidade de vida e relação custo-efetividade, mas a elegibilidade para Tx e a oferta de órgãos condicionam esta opção. Esta investigação desenvolveu-se em duas vertentes: i) determinar o rácio custo-utilidade incremental do Tx renal comparado com a Hd; ii) avaliar a capacidade máxima de dadores de cadáver em Portugal, as características e as causas de morte dos dadores potenciais a nível nacional, por hospital e por Gabinete Coordenador de Colheita e Transplantação (GCCT), e analisar o desempenho da rede de colheita de órgãos para Tx. Realizou-se um estudo observacional/não interventivo, prospetivo e analítico que incidiu sobre uma coorte de doentes em Hd que foi submetida a Tx renal. O tempo de seguimento mínimo foi de um ano e máximo de três anos. No início do estudo, colheram-se dados sociodemográficos e clínicos em 386 doentes em Hd, elegíveis para Tx renal. A qualidade de vida relacionada com a saúde (QVRS) foi avaliada nos doentes em Hd (tempo 0) e nos transplantados, aos três, seis, 12 meses, e depois, anualmente. Incluíram-se os doentes que por falência do enxerto renal transitaram para Hd. Na sua medição, utilizou-se um instrumento baseado em preferências da população, o EuroQol-5D, que permite o posterior cálculo dos QALY. Num grupo de 82 doentes, a QVRS em Hd foi avaliada em dois tempos de resposta o que permitiu a análise da sua evolução. Realizou-se uma análise custo-utilidade do Tx renal comparado com a Hd na perspetiva da sociedade. Identificaram-se os custos diretos, médicos e não médicos, e as alterações de produtividade em Hd e Tx renal. Incluíram-se os custos da colheita de órgãos, seleção dos candidatos a Tx renal e follow-up dos dadores vivos. Cada doente transplantado foi utilizado como controle de si próprio em diálise. Avaliou-se o custo médio anual em programa de Hd crónica relativo ao ano anterior à Tx renal. Os custos do Tx foram avaliados prospetivamente. Considerou-se como horizonte temporal o ciclo de vida nas duas modalidades. Usaram-se taxas de atualização de 0%, 3% e 5% na atualização dos custos e QALY e efetuaram-se análises de sensibilidade one way. Entre 2008 e 2010, 65 doentes foram submetidos a Tx renal. Registaram-se, prospetivamente, os resultados em saúde incluíndo os internamentos e os efeitos adversos da imunossupressão, e o consumo dos recursos em saúde. Utilizaram-se modelos de medidas repetidas na avaliação da evolução da QVRS e modelos de regressão múltipla na análise da associação da QVRS e dos custos do transplante com as características basais dos doentes e os eventos clínicos. Comparativamente à Hd, observou-se melhoria da utilidade ao 3º mês de Tx e a qualidade de vida aferida pela escala EQ-VAS melhorou em todos os tempos de observação após o Tx renal. O custo médio da Hd foi de 32.567,57€, considerado uniforme ao longo do tempo. O custo médio do Tx renal foi de 60.210,09€ no 1º ano e 12.956,77€ nos anos seguintes. O rácio custo-utilidade do Tx renal vs Hd crónica foi de 2.004,75€/QALY. A partir de uma sobrevivência do enxerto de dois anos e cinco meses, o Tx associou-se a poupança dos custos. Utilizaram-se os dados nacionais dos Grupos de Diagnóstico Homogéneos e realizou-se um estudo retrospectivo que abrangeu as mortes ocorridas em 34 hospitais com colheita de órgãos, em 2006. Considerou-se como dador potencial o indivíduo com idade entre 1-70 anos cuja morte ocorrera a nível hospitalar, e que apresentasse critérios de adequação à doação de rim. Analisou-se a associação dos dadores potenciais com características populacionais e hospitalares. O desempenho das organizações de colheita de órgãos foi avaliado pela taxa de conversão (rácio entre os dadores potenciais e efetivos) e pelo número de dadores potenciais por milhão de habitantes a nível nacional, regional e por Gabinete Coordenador de Colheita e Transplantação (GCCT). Identificaram-se 3.838 dadores potenciais dos quais 608 apresentaram códigos da Classificação Internacional de Doenças, 9.ª Revisão, Modificações Clínicas (CID- 9-MC) que, com maior frequência, evoluem para a morte cerebral. O modelo logit para dados agrupados identificou a idade, o rácio da lotação em Unidades de Cuidados Intensivos e lotação de agudos, existência de GCCT e de Unidade de Transplantação, e mortalidade por acidente de trabalho como fatores preditivos da conversão dum dador potencial em efetivo e através das estimativas do modelo logit quantificou-se a probabilidade dessa conversão. A doação de órgãos deve ser assumida como uma prioridade e as autoridades em saúde devem assegurar o financiamento dos hospitais com programas de doação, evitando o desperdício de órgãos para transplantação, enquanto um bem público e escasso. A colheita de órgãos deve ser considerada uma opção estratégica da atividade hospitalar orientada para a organização e planeamento de serviços que maximizem a conversão de dadores potenciais em efetivos incluindo esse critério como medida de qualidade e efetividade do desempenho hospitalar. Os resultados deste estudo demonstram que: 1) o Tx renal proporciona ganhos em saúde, aumento da sobrevida e qualidade de vida, e poupança de custos; 2) em Portugal, a taxa máxima de eficácia da conversão dos dadores cadavéricos em dadores potenciais está longe de ser atingida. O investimento na rede de colheita de órgãos para Tx é essencial para assegurar a sustentabilidade financeira e promover a qualidade, eficiência e equidade dos cuidados em saúde prestados na DRC5.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.