Three band-gap QW intermixing in InP/InGaAs/InGaAsP system for monolithically integrated optical switch

Quantum well intermixing is a key technique for photonic integration. The intermixing of InP/InGaAs/InGaAsP material involving the deposition of a layer of sputtered SiO2 on the semiconductor surface, followed by thermal annealing has allowed good control of the intermixing process and has been used to fabricate extended cavity lasers. This will be used for optimization of the performance of optical switches consisting of passive components, modulators and amplifiers.

A comparison of losses in small (<1 kW) drives using sine and space vector pulse width modulation schemes

this paper quantifies effects of using three different pulse width modulation (PWM) schemes on the losses in the inverter and induction motor of a 1 kW drive. Direct measurements of losses have been made with a calorimeter. Results show that for the inverter, discontinuous PWM excitation reduces losses by up to 15% compared to sine and symmetrical space vector PWM methods. However, at a low modulation index the greater harmonic content with discontinuous PWM increased motor losses by nearly 20%. This study demonstrates the importance of careful choice of modulation scheme to achieve high overall drive efficiency. © 2005 IEEE.

The oxidation of CH2O in the intermediate temperature range (943-995 K)

New atmospheric pressure flow reactor data on the oxidation of formaldehyde in the temperature range 943-995 K and over equivalence ratios from 0.013 to 36.7 are reported and discussed. A detailed mechanism assembled from previously published results produced acceptable agreement with the experimental data for the fuel-lean conditions, but failed to predict results for oxidative pyrolysis. Analysis or the very fuel-lean conditions, but failed to modelling results are principally sensitive to CH2O+HO2→HCO+H2O2 (6) and H2O2 +M→OH+OH+M (33). Whereas the specific rate of each reaction cannot be independently determined, it is found that the product k33.k6 is a well defined function of temperature: (3.4±3.0).1028 exp(-(26,800±400)/T). Inadequacies in the mechanism which may be responsible for the disagreement under fuel-rich conditions are discussed. © 1991 Combustion Institute.

Red-Green-Blue 2D tuneable liquid crystal laser devices

In this paper, we review our recent experimental work on coherent and blue phase liquid crystal lasers.We will present results on thin-film photonic band edge lasing devices using dye-doped low molar mass liquid crystals in self-organised chiral nematic and blue phases. We show that high Q-factor lasers can be achieved in these materials and demonstrate that a single mode output with a very narrow line width can be readily achievable in well-aligned mono-domain samples. Further, we have found that the performance of the laser, i.e. the slope efficiency and the excitation threshold, are dependent upon the physical parameters of the low molar mass chiral nematic liquid crystals. Specifically, slope efficiencies greater than 60% could be achieved depending upon the materials used and the device geometry employed. We will discuss the important parameters of the liquid crystal host/dye guest materials and device configuration that are needed to achieve such high slope efficiencies. Further we demonstrate how the wavelength of the laser can be tuned using an in-plane electric field in a direction perpendicular to the helix axis via a flexoelectric mechanism as well as thermally using thermochromic effects. We will then briefly outline data on room temperature blue phase lasers and further show how liquid crystal/lenslet arrays have been used to demonstrate 2D laser emission of any desired wavelength. Finally, we present preliminary data on LED/incoherent pumping of RG liquid crystal lasers leading to a continuous wave output. © 2009 SPIE.

The elastic-plastic indentation response of a columnar thermal barrier coating

Thermal barrier coatings with a columnar microstructure are prone to erosion damage by a mechanism of surface cracking upon impact by small foreign particles. In order to explore this erosion mechanism, the elastic indentation and the elastic-plastic indentation responses of a columnar thermal barrier coating to a spherical indenter were determined by the finite element method and by analytical models. It was shown that the indentation response is intermediate between that of a homogeneous half-space and that given by an elastic-plastic mattress model (with the columns behaving as independent non-linear springs). The sensitivity of the indentation behaviour to geometry and to the material parameters was explored: the diameter of the columns, the gap width between columns, the coefficient of Coulomb friction between columns and the layer height of the thermal barrier coating. The calculations revealed that the level of induced tensile stress is sufficient to lead to cracking of the columns at a depth of about the column radius. It was also demonstrated that the underlying soft bond coat can undergo plastic indentation when the coating comprises parallel columns, but this is less likely for the more realistic case of a random arrangement of tapered columns. © 2009 Elsevier B.V.

Development of intermediate moisture marinated fish product and its storage characteristics

An attempt was made to prepare an intermediate moisture (around 44% moisture) marinated (pH around 4) fish product. Fillets from Sciaenid fish (each fish weighing 70-80 gm) were dipped in a solution containing 7% acetic acid, 20% common salt and 1% propionic acid for 2 hours. After soaking, the soaked fillets were partially dried to about 44% moisture. Three effective hurdles like low pH (by using 7% acetic add and 1% propionic acid), low water activity (by using 20% salt and partially drying the fillets) and preservative (1% propionic add), were used to prepare a shelf-stable product at room temperature. The dried product was sprayed with 0.0 5% BHA in 50% alcohol and further dried for 10 minutes to remove added water and alcohol, thereby another hurdle (preservative) against fat oxidation. The product was packed in 300 gauge polythene bags and stored in transparent screw cap plastic jars. Fortnightly samples were drawn and subjected to biochemical, bacteriological and organoleptic evaluation to study its storage characteristics. The product was in good acceptable form up to 4 months at ambient temperature. The product needed one hour soaking in water with two changes of water in between to make it free from excess salt and acid smell.

Voltage programmable dual-band bandpass/bandstop filter response in a single micro-electro-mechanical device

This paper reports on a switchable multi-band filter response achieved within a single micro-electro-mechanical device. A prototype device fabricated in a SOI process demonstrates a voltage programmable and tunable, dual-band, band-pass/band-stop response. Both analytical and finite element models are introduced in this paper to elucidate the operating principle of the filter and to guide filter design. Voltage programmability of the filter characteristic is demonstrated with the ability to independently tune the centre frequency and bandwidth for each band. A representative measurement shows that the minimum 3 dB-bandwidth (BW) is 155 Hz, 140Hz, and 20 dB-BW is 216 Hz, 203Hz for the upper-band and lower-band center frequencies located at 131.5 kHz and 130.7 kHz, respectively. © 2011 IEEE.

The evolution of intermediate castration virulence and ant coexistence in a spatially structured environment

Theory suggests that spatial structuring should select for intermediate levels of virulence in parasites, but empirical tests are rare and have never been conducted with castration (sterilizing) parasites. To test this theory in a natural landscape, we co

A PCR-based RFLP analysis of Sarcocystis cruzi (Protozoa : Sarcocystidae) in Yunnan province, PR china, reveals the water buffalo (Bubalus bubalis) as a natural intermediate host

A polymerase chain reaction-based restriction fragment length polymorphism (RFLP) approach is used to examine Sarcocystis cruzi-like taxa from the atypical intermediate host, water buffalo, in Yunnan, People's Republic of China. The loci examined lie with

A DNA-sequence based phylogeny for triculine snails (Gastropoda : Pomatiopsidae : Triculinae), intermediate hosts for Schistosoma (Trematoda : Digenea): phylogeography and the origin of Neotricula

Partial (DNA) sequences were examined for one nuclear (28S rRNA gene) and one mitochondrial (16S rRNA) locus for nine species of pomatiopsid snail (Gastropoda: Rissooidea: Pomatiopsidae) from south-east Asia and south-west China. Fresh field samples were

Influence of muscle fats on the quality of intermediate moisture fish

Chrysicthys nigrodigitatus with 12.95% fat having an iodine value of 74.8 and a saponification number of 198.48 and Citharinus citherus containing only 3.25% fat with iodine value of 67.8 and a saponification number of 145.86 were studied as examples of fatty and lean fishes respectively. The intermediate moisture (IM) products of both fish types compared with normal cooked samples, were evaluated as of acceptable colour, odour, texure and juiciness but of inferior taste due to the glycerol impact. However, during storage at 30°C the IM products became increasingly less acceptable with the deterioration being greater in the fatty fish than in the lean fish, although the fatty IM fish was superior to the IM lean fish with regard to water retention and juiciness. Overall quality differences were most apparent in colour and odour with the fatty IM fish being worse. The fatty fish had also greater evolution of TEA-reactive carbonyl breakdown products of lipid oxidation which were subsequently used up in non-enzymic browning producing the correspondingly darker fish colour and greater off odour.

Use of simple fat analysis for evaluating quality changes in intermediate moisture fish stored at tropical temperature

Changes in the quality of intermediate moisture (IM) fish during storage at 38°C were monitored by assessing the moisture content, pH, acid value, peroxide value and thiobarbituric acid (TBA) value periodically. Results adequately portrayed the hydrolysis and peroxidation of fats and the concomitant protein degradation and crosslinking reactions that have been shown by more sophisticated methods to occur in intermediate moisture fish. Since these changes markedly affect the organoleptic quality, acceptability/shelf-life and nutritive value of IM flesh-foods their predictability by simple fat analytical techniques is of practical value where/when the more sophisticated monitoring techniques are not feasible.

Plasmonic band gaps and waveguide effects in carbon nanotube arrays based metamaterials.

Highly dense periodic arrays of multiwalled carbon nanotubes behave like low-density plasma of very heavy charged particles, acting as metamaterials. These arrays with nanoscale lattice constants can be designed to display extended plasmonic band gaps within the optical regime, encompassing the crucial optical windows (850 and 1550 nm) simultaneously. We demonstrate an interesting metamaterial waveguide effect displayed by these nanotube arrays containing line defects. The nanotube arrays with lattice constants of 400 nm and radius of 50 nm were studied. Reflection experiments conducted on the nanoscale structures were in agreement with numerical calculations.