Iron oxides as proxies for characterizing anisotropy in soil CO2 emission in sugarcane areas under green harvest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rapid preparation of alpha-FeOOH and alpha-Fe2O3 nanostructures by microwave heating and their application in electrochemical sensors

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Clay mineralogy and magnetic susceptibility of Oxisols in geomorphic surfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Patient Education and Self-Care for the Management of Jaw Pain upon Awakening: A Randomized Controlled Clinical Trial Comparing the Effectiveness of Adding Pharmacologic Treatment with Cyclobenzaprine or Tizanidine

Aims: To compare the effectiveness of adding cyclobenzaprine, tizanidine, or placebo to patient education and a self-care management program for patients with myofascial pain and specifically presenting with jaw pain upon awakening. Methods: Forty-five patients with a diagnosis of myofascial pain based on the guidelines of the American Academy of Orofacial Pain participated in this 3-week study. The subjects were randomly assigned into one of three groups: placebo group, TZA group (tizanidine 4 mg), or CYC group (cyclobenzaprine 10 mg). Patients were evaluated for changes in pain intensity, frequency, and duration by using the modified Severity Symptoms Index and changes in sleep quality with the use of the Pittsburgh Sleep Quality Index. Data were analyzed by ANOVA and post-hoc or nonparametric statistical tests as appropriate. Results: All three groups had a reduction in pain symptoms and improvement of sleep quality based on a comparison of pretreatment and treatment scores. However, no significant differences among the groups were observed at the posttreatment evaluation. Conclusion: The use of tizanidine or cyclobenzaprine in addition to self-care management and patient education was not more effective than placebo for the management of patients with myofascial jaw pain upon awakening.

Geological and geophysical data integration for delimitation of mineralized areas in a supergene manganese deposits

Geophysical methods are widely used in mineral exploration. This paper discusses the results of geological and geophysical studies in supergene manganese deposits of southern Brazil. Mineralized zones as described in geological surveys were characterized as of low resistivity (20 Omega.m) and high chargeability (30ms), pattern found also in oxides and sulfite mineral deposits. Pseudo-3D modeling of geophysical data allowed mapping at several depths. A relationship between high chargeability and low resistivity may define a pattern for high grade gonditic manganese ore. Large areas of high chargeability and high resistivity may result in accumulation of manganese and iron hydroxides, due to weathering of the gonditic ore, dissolution, percolation and precipitation.

Mechanisms of phase formation along the synthesis of Mn-Zn ferrites by the polymeric precursor method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A new and practical carbon paste electrode for insoluble and ground samples

This work presents a new and simple electrode, which may be used to achieve the electrochemical response of ground solids or insoluble samples. Ore samples from Morro Velho Mine (Brazil) were employed to exemplify the use of such electrodes. The new electrode avoids the use of binders or other agents overcoming major deterioration problems. (C) 2002 Published by Elsevier Science B.V.

Platinum-Group Minerals in Chromitites of the Niquelandia Layered Intrusion (Central Goias, Brazil): Their Magmatic Origin and Low-Temperature Reworking during Serpentinization and Lateritic Weathering

A variety of platinum-group-minerals (PGM) have been found to occur associated with the chromitite and dunite layers in the Niquelandia igneous complex. Two genetically distinct populations of PGM have been identified corresponding to phases crystallized at high temperatures (primary), and others formed or modified during post-magmatic serpentinization and lateritic weathering (secondary). Primary PGM have been found in moderately serpentinized chromitite and dunite, usually included in fresh chromite grains or partially oxidized interstitial sulfides. Due to topographically controlled lateritic weathering, the silicate rocks are totally transformed to a smectite-kaolinite-garnierite-amorphous silica assemblage, while the chromite is changed into a massive aggregate of a spinel phase having low-Mg and a low Fe3+/Fe2+ ratio, intimately associated with Ti-minerals, amorphous Fe-hydroxides, goethite, hematite and magnetite. The PGM in part survive alteration, and in part are corroded as a result of deep chemical weathering. Laurite is altered to Ru-oxides or re-crystallizes together with secondary Mg-ilmenite. Other PGM, especially the Pt-Fe alloys, re-precipitate within the altered chromite together with kaolinite and Fe-hydroxides. Textural evidence suggests that re-deposition of secondary PGM took place during chromite alteration, controlled by variation of the redox conditions on a microscopic scale.

Modelo estrutural do maciço rochoso do Depósito de Cobre e Ouro da Mina da Chapada, Alto Horizonte, GO

The Cu-Au mine of Chapada is located in the municipality of Alto Horizonte, in the northwestern portion of Goiás state and is inserted in the geological context of the Brasilia Belt, specifically the Mara Rosa Magmatic Arc, which hosts important deposits of Au and Cu-Au. The rocks found in the study area belong mainly to the Volcano-Sedimentary Sequence of Mara Rosa and are composed of basic to acidic metavolcanic rocks, psammiticpellitic metasedimentary rocks, chemical rocks and also hydrothermal products. Late intrusions occur and are represented by pegmatitic dikes and tonalitic bodies. The ore deposit of the Chapada mine is formed predominantly by the chalcopyrite-pyritemagnetite association, where pyrite is the most abundant mineral. Through the structural mapping of the mining fronts, it was able to recognize three deformational phases (Dn, Dn +1, Dn +2). During the Dn phase, isoclinal recumbent folds were formed, in association with amphibolites facies metamorphism. Later, in phase Dn +1, there was formation of drag folds and intrafolial folds in association with retrograde metamorphism in the greenschist facies. The deformational phase Dn +2, in its turn, was responsible for late symmetrical folding of the foliation, with NS and EW axes, resulting in an interference pattern of the dome-and-basin type

Caracterização petrográfica e geoquímica das rochas encaixantes da mineralização de ouro do alvo lavra velha - Ibitiara (BA)

The Lavra Velha gold prospect is located in Ibitiara city, in the Espinhaço Setentrional physiographic domain, on the west edge of Chapada Diamantina – central part of Bahia. It is inserting on Gavião Block, a compartment of São Francisco Cráton (Almeida, 1977). The Lavra Velha gold dump is formed by an association of hydrothermal breccia lodged in acid and intermediate rocks, classifying in tonalite, granodiorite and diorite, with high alteration, cut off by a vein and venules system constituted by hydrothermal association composed by hematite, tourmaline, quarz and sericite, located in the north limit of Ibitiara granite. In the regional geological context the area is represented by Archaean rocks (Paramirim Complex) and Paleoproterozoic rocks (Ibitiara granitoid and Matinos Granite) constituted the basement, following by paleo to mesozoic pluton-vulcanic-sedimentary association of Rio dos Remédios Group, intruded by mafic rocks. It was used geochemistry and petrographic analysis compiling to field works data to characterize the rocks where the gold mineralization is inserting. Previously these rocks were classifying in volcanic rocks of Novo Horizonte Formation. Developing this monograph’s work the petrogenetic characteristics suggesting that these rocks called volcanic actually belong to Ibitiara granitoid as a portion more metamorphosed. The green schist is the predominant metamorphism in the area with low deformation, associated to high concentration of fluid circulating. The hydrothermal alteration is the process responsible for rocks modifications and strong sericitization generalize

Caracterização geológica e estrutural da porção centro-norte do greenstone belt de Faina, Faina-GO

The area where the study was conducted is located in the central-western state of Goias. It geologically inserts the northern portion of the Greenstone Belt of Faina which belongs to the Archean terranes that fits in Brasília Fold Belt and Tocantins Structural Province. This region is known for its greenstone lode gold potential and it was heavily exploited by pioneers and prospectors, leaving many records for where they have been through. Preliminary work done by Orinoco Brasil Mineração in their required areas at the region showed that the environment is promising for gold mineralization and that the ore is controlled by structures. Therefore the objectives of this work were the geological and structural mapping in semi detail scale to improve geological, stratigraphic and structural controls present attributing possible ore understanding. With the development of the work there were recognized on the desktop three structural domains separated by a thrust fault. For each domain were discriminated the geological units ranging in gneisses, quartzites formed from coarse sediments arcoseanos, and schists. By mapping structures there were found five deformation phases, Dn-2, Dn-1, the Dn event that generated the main foliation (Sn) in high representation and two post-stages Dn with brittle late manifestations. The detail mapping of the Rattlesnake Gallery showed that the mineralized quartz vein is consistent with axial-plane foliation Sn-2 belonging to the oldest deformation Dn-2 phase and that the high grade is distributed in the hinge region folds of the same phase

Análises de solos e sedimentos de corrente, nas áreas das usinas de fundição de chumbo do Calabouço (CIEM-CPRM) e de beneficiamento de minério aurífero do Morro do Ouro (Parque Municipal Morro do Ouro), no município de Apiaí - SP

Located in Apiaí, Vale do Ribeira, southern region of São Paulo state, the Usina do Calabouço areas (CIEM / CPRM) and Morro do Ouro (Parque Municipal do Morro do Ouro), were targeted for stud ies due to its old buildings, respectively a foundry in lead ore, called Experimental de Chumbo e Prata (Usina Calabouço), and a gold mine with processing plant of the gold-bearing ore produced there. Nowadays, the areas are used for public visitation, and in both places the rests of the buildings remains. Particularly in the CIEM/CPRM, due to the materials witch was produced before, it can suggest the existence of anomalous amounts of the involved metals (CIEM / CPRM) and possible contaminations by chemical products used in the improvement of the auriferous ore (P. M. Morro do Ouro). These potential contamination were confirmed with geochemical survey of soils and current sediments accomplished in both areas, for the elements arsenic, cadmium, lead, copper, mercury, silver and zinc, which were used as parameters guiding values for soil and groundwater the state of São Paulo (CETESB), and watershed values stipulated by CPRM (poor, background and anomalous), in it rising geochemistry during Folha Apiaí's execution (SG-22-X-B-V).

Síntese e caracterização de ferritas de manganês e zinco visando aplicação como agente de contraste em diagnóstico médico

This work aims to synthesize the manganese and zinc ferrite, by the polymeric precursor method, in order to obtain materials with appropriate characteristics for the application in medical diagnosis techniques. The manganese and zinc ferrite powders with the composition of Mn(1-x)ZnxFe2O4, where x=0,23, were prepared and calcined in air at different times and temperatures. The X-ray diffraction (XRD) data show that the sample calcined at 400°C crystallize as ferrite (monophase), but in an inverted spinel structure (high content of iron occupying manganese tetrahedral site and manganese occupying the iron octahedral site). The samples calcined at temperatures between 600°C and 900°C shows the secondary phase of hematite and the sample calcined at 1100oC shows to be monophase in ferrite with normal spinel structure. The monophase powders of ferrite showed a reduction in the surface area and an increasing in the pore size for higher calcination temperatures. The magnetic analysis show that the sample calcined at 400°C presents satisfactory magnetization at room temperature, however, it behaves as diamagnetic material at low temperatures (10K). The powder containing hematite, without the partial substitution of iron ions by manganese, showed to have low transition temperature, and consequently low magnetization at room temperature. The hematite, when partially substituted, provides materials with irregular magnetization at the saturation region. The powder calcined at 1100°C shows high magnetization either at room temperature or low temperature (10K)

Geologia da região da Fazenda Salobo, Vazante - MG

Important deposits of Zn-Pb associated with the Vazante Group, and Au in Group Canastra occur in the Vazante-Paracatu region (MG). They are located in the Brasília Fold Belt, which was generated from a convergent tectonic in the Brasiliano cycle, forming a complex system of imbricated nappes and faults. This study aims to characterize stratigraphic, structural and metamorphic aspects of an area, located in the Salobo’s farm region. A geological mapping in 1:20,000 scale was executed in order to identify the outcropping lithotypes and to collect structural measures. Drill holes were described to support the surface data and samples were selected for the preparation of thin and polished sections. In this context, the occurrence of rock types and hydrothermal processes that had not been previously described were found, for example layers of phosphatic quartzite in the Serra do Poço Verde Formation (SPV), hydrothermal hematites from martitization magnetite in contact by detachment of the Serra do Garrote Formation and SPV in the Vazante Group and layers of microbanded iron formations in Paracatu Formation (Canastra Group). In the area, four deformational phases were recognized, occurring progressively, in which two of them are related to convergent tectonic, with the development of thrust faults, one is associated to tectonic escape and/or reactivation of basement faults and the last has a distensive character, representing the post-convergence relaxation. The metamorphism in the area was subgreenschist facies, reaching lower greenschist, with temperatures up to 350°C

Geologia e pesquisa mineral na região oeste do maciço Caritianas, municípios de Alto Paraíso e Itapuã D'Oeste, Rondônia

The granites Rondonianos, located in Rondônia Tin Pronvíncia, the southwestern portion of the Amazonian Craton, have great economic importance due to its large potential metallogenic. These granites stands out Intrusive Suite or Suite Granites Latest Rondônia Rondônia, with approximately 997-998 Ma (Bettencourt et al., 1997, 1999), for their tin mineralization having the largest reserves of this ore from Brazil. These tin mineralization in veins greissen are genetically related to these granites, deposits with different structural styles both within granitic plutons (endogreissen) as the host rocks (exogreissen). The western region of the Massif Caritianas has few published works, and the geology and potential econômicoão that were never fully known, now with the recovery of tin in the world market need new campaigns and prospective discoveries of new deposits