Size related feeding patterns and electivity indices of silver barb (Barbodes gonionotus Bleeker) from a pond, Bangladesh

The feeding patterns with respect to quality and quantity of food of silver barb, Barbodes gonionotus varied with their size and development. The results indicated that the fish in the size group I (7-25 mm TL) were fairly omnivore with particular liking for rotifera, green and blue-green algae while the size group II (25.1-44 mm TL) and III (44.1-55 mm TL) were omnivore with higher tendency of feeding on debris, aquatic plants, green algae, blue-green algae and rotifera. However, the fish of the size group IV (55.1-80 mm TL) were found to be herbivore with feeding preference for aquatic plants, green and blue-green algae. In all the size groups, debris was the most dominant food item. Feeding preference of the fish showed clear ontogenetic shift. The electivity indices revealed that the fish were selective feeder.

Size frequency distribution and carapace length-total length relationship of Acetes chinensis in the Kutubdia channel of Bangladesh coast

The seasonal mean size distribution of A. chinensis were estimated as 29.229mm ±4.77, 25.125mm ±2.55, 25.165mm ±2.29 and 32.44mm ±3.63 for annual, monsoon, postmonsoon and pre-monsoon period, respectively. Seasonal mean carapace length distribution were estimated as 9.37mm ±1.457, 8.063mm ±0.63,8.258mm ±0.59 and 10.37mm ±l.ll3 for annual, monsoon, post-monsoon and the pre-monsoon season. The carapace length and total length relationships was found to be TL= - 1.39±3.23 CL. Linear relation was found in arithmetic and as well as logarithmic scale.

An observation of performances in carp-prawn polyculture in respect of fingerlings size and water area

Performances of fingerling size and water area was studied. Seven species of fish included 25% of Hypophthalmichthys molitrix, 15% of Gada catla, 20% of Labeo rohita, 10% of Cirrhinus mrigala, 10% of Ctenophyringodon idella and 20% of Macrobrachium rosenbergii were stocked at the rate of 8,000 individual/ha along Barbodes gonionoms at 6.0g weight size with a stocking density of 2,000 indl./ ha. Survival of all species was in the range of 39.9 to 96.3% except M. rosenbergii The highest survival was obtained from L. rohita (96.3%) followed by C mrigala (96.0 %)., B. gonionotus (92.3%), C idella (90.6%), H. molitrix (84.0%), C cada (81.7%) respectively. While the survival of M. rosenbergiiwas 13.1%. The highest production of 4912 kg/ha/yr was obtained from the bigger ponds (0.4 ha) stocked with 20-32g size of fingerlings, while lowest production (3123 kg/ha/yr) from small pond (0.1 ha) stocked with 3-10 g fingerlings. Economic analysis shows the highest net profit in bigger ponds stocked with bigger fish seed.

Food of two size-groups of the catfish Mystus giulio (Hamilton-Buchanan) in Vemblai canal, Vypeen Island

The stomach contents of two length-groups of the catfish Mystus gulio collected from Vemblai Canal in Vypeen Island (Kochi) were examined by frequency of occurrence and points methods. Analyses using standard indices proved difference in diet composition between the two size-groups.

Evolution of suitable trawl nets for medium size trawlers - 1: Comparative fishing efficiency between 32 m bulged belly, long wing and four panel trawls

Comparative studies of the efficiency of 32 m bulged belly, long wing and four panel trawls have shown that the bulged belly trawl to be superior to the other nets in catching bottom fishes and column fishes. 40% of the bottom fishes and 48% of the column fishes were caught by the bulged belly trawl. However, for prawn catch, the long wing trawl appears to be better as it landed 52% of the total prawn catch of the three nets. Bulged belly trawl was found to be next only to long wing trawl in this respect.

Evolution of suitable type of bottom trawls for the medium size steel trawlers of Orissa Fisheries Department

This paper deals with the results of fishing operations conducted with conventional trawls of size 22.3 - 25.6 m and gear of 32 m long wing and bulged belly designed and developed at the Central Institute of Fishery Technology, from four medium size trawlers of Orissa Fisheries Department during 1970-71 and 1971-72 fishing seasons. By employing suitable and standard size gear there was proper utilisation of the engine power with resultant increase in the total landings of shrimps and bottom and off bottom fishes.

Mitochondrial DNA variation, effective female population size and population history of the endangered Chinese sturgeon, Acipenser sinensis

The anadromous Chinese sturgeon (Acipenser sinensis), mainly endemic to the Yangtze River in China, is an endangered fish species. The natural population has declined since the Gezhouba Dam blocked its migratory route to the spawning grounds in 1981. In the near future, the completion of the Three Gorges Dam, the world's largest hydroelectric project, may further impact this species by altering the water flow of the Yangtze River. Little is currently known about the population genetic structure of the Chinese sturgeon. In this study, DNA sequence data were determined from the control region (D-loop) of the mitochondrial genome of adult sturgeons (n = 106) that were collected between 1995-2000. The molecular data were used to investigate genetic variation, effective female population size and population history of the Chinese sturgeon in the Yangtze River. Our results indicate that the reduction in abundance did not change genetic variation of the Chinese sturgeon, and that the population underwent an expansion in the past. AMOVA analysis indicated that 98.7% of the genetic variability occurred within each year's spawning populations, the year of collection had little influence on the diversity of annual temporary samples. The relative large effective female population size (N-ef) indicates that good potential exists for the recovery of this species in the future. Strikingly, the ratio of N-ef to the census female population size (N-f) is unusually high (0.77-0.93). This may be the result of a current bottleneck in the population of the Chinese sturgeon that is likely caused by human intervention.

Shore seines for reservoirs - Part 2 - Studies on optimum mesh size

Fish landings by shore seines operated in the Hirakud reservoir were analysed species wise and their morphometrical details were recorded. Based on the above investigation proportionality coefficients in respect of important species of fish were worked out in order to detetmine the optimum mesh size as this was important from the conservation point of view. This communication discusses the significance of mesh regulation for shore seines.

Effect of variation in mesh size on trawl efficiency

Result of comparative fishing trials with a bulged belly design with three different mesh ranges in the body and wing to study the effect of mesh size difference on the performance of gear is discussed. While there is no significant difference in catch rate, predictably the 40 mm mesh size trawl fared wen when small sized fish like anchovies formed the major catch. The trawls with 60 and 80 mm mesh size gave better horizontal spread at a lower resistance showing savings in fuel.

Growth and survival rates of hatchery-produced and wild milkfish fry grown to fingerling size in earthen nursery ponds

Growth and survival rates of hatchery-produced and wild milkfish (Chanos chanos ) fry grown to fingerling size were compared. Data show no significant difference between the 2 fry. At a recommended stocking density of 30 fry/m super(2), hatchery-produced milkfish fry could attain fingerling size of almost 2g with a survival of 68%. The study indicates that hatchery-produced fry/fingerlings can equal the culture performance of the wild fry. Comparative performance of hatchery-bred and wild fry should encourage intensified research on milkfish broodstock development and refinement of induced spawning methods.

On the optimum mesh size for the capture of Barbus tor (Hamilton)

Results of mesh selectivity experiments on B. tor are presented in this paper. Selectivity curve on the basis of maximum girth of fish in relation to perimeter of mesh was worked out. The optimum girth/mesh perimeter ratio was found to be 1.31. A linear regression of G+0.445L=12.8 was fitted for conversion of length to girth.